Re: Thread scheduler misbehaviour OR Oprofile bug?

[William Cohen <wcohen@redhat.com>]

On 01/16/2015 01:29 PM, Zoltan Kiss wrote:
> 
> 
> On 16/01/15 15:38, William Cohen wrote:
>> On 01/16/2015 09:01 AM, Zoltan Kiss wrote:
>>> Hi,
>>>
>>> I'm using OProfile to check some suspicious behaviour of dpdk-pktgen,
>>> and I can see something which troubles me. Either the scheduler lies
>>> about core affinity or Oprofile accounts some samples wrongly.
>>> This userspace app runs in threads, which are assigned explicitly to one
>>> single core with pthread_setaffinity_np (I've added some debug lines
>>> which checks the affinity with pthread_getaffinity_np to make sure that
>>> the affinity was correctly set indeed)
>>> These threads run infinite loops, calling different functions. In my
>>> example one of these functions (pktgen_main_rxtx_loop) should only be
>>> called by the thread on core #1, but in the oprofile results I can see
>>> samples from all other cores as well. I've added a sched_getcpu() call
>>> to every iteration of that infinite loop to check if it runs anywhere
>>> else than core #1, but it seems to be fine.
>>> So my conclusion is that either the scheduler doesn't care about thread
>>> affinity and even sched_getcpu() can't see that, OR, Oprofile falsely
>>> accounts samples to the wrong CPU. Or to the wrong symbol, although I've
>>> added "__attribute__ ((noinline))" to every called function to make sure
>>> that inlineing doesn't screw up anything.
>>> I'm running my tests on Ubuntu Servers with 14.04 with 3.13.0-32 kernel,
>>> the CPU is a desktop kind, i5-4570 @ 3.20GHz (no-HT!) with oprofile 0.9.9.
>>> Anyone have a suggestion about what happens?
>>>
>>> Regards,
>>>
>>> Zoltan
>>
>> Hi Zoltan,
>>
>> Are you using operf or opcontrol to set up the data measurements?  It would be good to provide the command lines that you are using to do the data collection with oprofile.
>>
>> "perf stat <command>" or "perf stat -p <list_of_pids>" can show task migration.  Look for the non-zero "cpu-migrations" in the output like in the output below.
>>
>> $ perf stat -p 29600
>> ^C
>>   Performance counter stats for process id '29600':
>>
>>         4303.761019      task-clock (msec)         #    0.305 CPUs utilized           [100.00%]
>>              17,980      context-switches          #    0.004 M/sec                   [100.00%]
>>                 595      cpu-migrations            #    0.138 K/sec                   [100.00%]
>>              44,212      page-faults               #    0.010 M/sec
>>      10,585,868,260      cycles                    #    2.460 GHz                     [100.00%]
>>       6,463,554,435      stalled-cycles-frontend   #   61.06% frontend cycles idle    [100.00%]
>>     <not supported>      stalled-cycles-backend
>>      10,400,529,789      instructions              #    0.98  insns per cycle
>>                                                    #    0.62  stalled cycles per insn [100.00%]
>>       2,049,813,299      branches                  #  476.284 M/sec                   [100.00%]
>>          48,441,881      branch-misses             #    2.36% of all branches
>>
>>        14.112614437 seconds time elapsed
>>
> I've checked with perf, it doesn't show any cpu-migrations. I've also 
> checked the actual vma addresses in the samples, they are indeed 
> referring to that particular function. Tried to compile the application 
> with -O0 and -Og, no luck so far

Hi Zoltan,

Could you write up the steps used to produce the problem so we have a reproducer and include the header and the portion of the opreport output that shows the problem?

-Will
>>
>>
>> As a check you might try using "perf record <command>" or "perf record -p <list_of_pids>".  Once data collection is done use "perf report --sort=cpu" to see whether samples were recorded on other processors.  That would determine how much the monitored process is beoing scheduled on other cpus.
> I tried to use "perf report" in various ways, but I couldn't get any 
> information out related to which CPU was used.
>>
>> There is also a systemtap (https://sourceware.org/systemtap/) script cycle_thief (https://sourceware.org/systemtap/examples/#process/cycle_thief.stp) that shows how often tasks are migrated and what other tasks are competing with the pid for time.
>>
>> These suggestions should help determine whether oprofile is getting the attribution of samples wrong or the scheduler is migrating the tasks.
>>
>> -Will
>>
> 
> ------------------------------------------------------------------------------
> New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
> GigeNET is offering a free month of service with a new server in Ashburn.
> Choose from 2 high performing configs, both with 100TB of bandwidth.
> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
> http://p.sf.net/sfu/gigenet
> _______________________________________________
> oprofile-list mailing list
> oprofile-list@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oprofile-list
>