From: Chung-Lin Tang <cltang@codesourcery.com>
To: Ley Foon Tan <lftan@altera.com>
Cc: Chung-Lin Tang <chunglin.tang@gmail.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Tobias Klauser <tklauser@distanz.ch>
Subject: Re: [PATCH] nios2: __kuser_sigtramp placement fix
Date: Thu, 22 Jan 2015 17:07:55 +0800 [thread overview]
Message-ID: <54C0BDEB.80809@codesourcery.com> (raw)
In-Reply-To: <CAFiDJ58=zM5Vk9M_z6tuW0nROjougVS+KYuZkhm0sgKw-vq=7w@mail.gmail.com>
On 2015/1/22 下午 04:43, Ley Foon Tan wrote:
> On Thu, Jan 22, 2015 at 4:15 PM, Chung-Lin Tang <cltang@codesourcery.com> wrote:
>> On 2015/1/22 03:54 PM, Ley Foon Tan wrote:
>>> On Thu, Jan 22, 2015 at 3:14 PM, Chung-Lin Tang <chunglin.tang@gmail.com> wrote:
>>>> The address of __kuser_sigtramp is wrong by one word, due to padding
>>>> __kuser_cmpxchg to fully 64 bytes. The version word at the start of the
>>>> page displaces __kuser_sigtramp to 0x1044, instead of the intended 0x1040.
>>>>
>>>> Fixed by counting the 64-byte frame from the start of the page instead
>>>> of __kuser_cmpxchg. This shortens the __kuser_cmpxchg frame to 60-bytes,
>>>> but that's likely enough.
>>>>
>>>> The zero-byte padding parts of the kuser_pad macro has been removed, due
>>>> to the .if command refusing to behave properly when there are other
>>>> .word directives in between. Probably a binutils gas bug.
>>>>
>>>> Thanks,
>>>> Chung-Lin
>>>>
>>>> Cc: Ley Foon Tan <lftan@altera.com>
>>>> Cc: Tobias Klauser <tklauser@distanz.ch>
>>>> Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
>>>>
>>>> diff --git a/arch/nios2/kernel/entry.S b/arch/nios2/kernel/entry.S
>>>> index 0bdfd13..3224839 100644
>>>> --- a/arch/nios2/kernel/entry.S
>>>> +++ b/arch/nios2/kernel/entry.S
>>>> @@ -492,14 +492,7 @@ ENTRY(ret_from_kernel_thread)
>>>>
>>>> /* Filling pads with undefined instructions. */
>>>> .macro kuser_pad sym size
>>>> - .if ((. - \sym) & 3)
>>>> - .rept (4 - (. - \sym) & 3)
>>>> - .byte 0
>>>> - .endr
>>>> - .endif
>>>> - .rept ((\size - (. - \sym)) / 4)
>>>> - .word 0xdeadbeef
>>>> - .endr
>>>> + .fill ((\size - (. - \sym)) / 4), 4, 0xdeadbeef
>>>> .endm
>>>>
>>>> .align 6
>>>> @@ -526,7 +519,10 @@ cmpxchg_stw:
>>>> cmpxchg_ret:
>>>> ret
>>>>
>>>> - kuser_pad __kuser_cmpxchg, 64
>>>> + /* The first 64-byte frame contains the version word, so note
>>>> + that the first padding entry is based from the start of the kuser
>>>> + page, instead of __kuser_cmpxchg. */
>>>> + kuser_pad __kuser_helper_start, 64
>>>>
>>>> .globl __kuser_sigtramp
>>>> __kuser_sigtramp:
>>>> --
>>> Hi Chung-Lin
>>>
>>> I thought this is our original intention for it.
>>>
>>> First 4 bytes is the __kuser_version and each __kuser function will
>>> have 64 bytes size.
>>>
>>> 0x1000 __kuser_helper_version
>>> 0x1004 __kuser_cmpxchg
>>> 0x1044 __kuser_sigtramp
>>>
>>> Any reason you can't use __kuser_sigtramp @ 0x1044?
>>
>> Well, that's okay as well, as the main place which sets this is the
>> signal frame construction in arch/nios2/kernel/signal.c. The user space
>> is mostly oblivious to the exact location. You'll need to update it
>> that way if you prefer 0x1044, as it's currently set at 0x1040.
>>
>> I suggested 0x1040 because 64b frames aligned at 64b seemed more
>> intuitive; __kuser_cmpxchg would be a special case.
>
> I think I will change to 0x1044 in arch/nios2/kernel/signal.c. I can
> submit the fix.
> Do you need to update toolchain for this change?
No, the toolchain is not affected by this change.
Thanks,
Chung-Lin
next prev parent reply other threads:[~2015-01-22 9:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-22 7:14 [PATCH] nios2: __kuser_sigtramp placement fix Chung-Lin Tang
2015-01-22 7:54 ` Ley Foon Tan
2015-01-22 8:15 ` Chung-Lin Tang
2015-01-22 8:43 ` Ley Foon Tan
2015-01-22 9:07 ` Chung-Lin Tang [this message]
2015-01-22 9:12 ` Ley Foon Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C0BDEB.80809@codesourcery.com \
--to=cltang@codesourcery.com \
--cc=chunglin.tang@gmail.com \
--cc=lftan@altera.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tklauser@distanz.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox