public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Giuseppe CAVALLARO <peppe.cavallaro@st.com>
To: Beniamino Galvani <b.galvani@gmail.com>,
	"David S. Miller" <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Dave Taht <dave.taht@gmail.com>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] net: stmmac: add BQL support
Date: Thu, 22 Jan 2015 12:58:02 +0100	[thread overview]
Message-ID: <54C0E5CA.80902@st.com> (raw)
In-Reply-To: <1421863647-20048-1-git-send-email-b.galvani@gmail.com>

On 1/21/2015 7:07 PM, Beniamino Galvani wrote:
> Add support for Byte Queue Limits to the STMicro MAC driver.
>
> Tested on a Amlogic S802 quad Cortex-A9 board, where the use of BQL
> decreases the latency of a high priority ping from ~12ms to ~1ms when
> the 100Mbit link is saturated by 20 TCP streams.
>
> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>


Ciao Beniamino

thx for the patch, I also see some improvements on my side

Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>

> ---
> Changes since v1:
>   - don't access skb->len after the start of DMA transmission in
>     stmmac_xmit(), to avoid potential use after free in case tx_lock is
>     removed in the future
>
>   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +++++++++
>   1 file changed, 9 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 118a427..1d74313 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1097,6 +1097,7 @@ static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
>
>   	priv->dirty_tx = 0;
>   	priv->cur_tx = 0;
> +	netdev_reset_queue(priv->dev);
>
>   	stmmac_clear_descriptors(priv);
>
> @@ -1300,6 +1301,7 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
>   static void stmmac_tx_clean(struct stmmac_priv *priv)
>   {
>   	unsigned int txsize = priv->dma_tx_size;
> +	unsigned int bytes_compl = 0, pkts_compl = 0;
>
>   	spin_lock(&priv->tx_lock);
>
> @@ -1356,6 +1358,8 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
>   		priv->hw->mode->clean_desc3(priv, p);
>
>   		if (likely(skb != NULL)) {
> +			pkts_compl++;
> +			bytes_compl += skb->len;
>   			dev_consume_skb_any(skb);
>   			priv->tx_skbuff[entry] = NULL;
>   		}
> @@ -1364,6 +1368,9 @@ static void stmmac_tx_clean(struct stmmac_priv *priv)
>
>   		priv->dirty_tx++;
>   	}
> +
> +	netdev_completed_queue(priv->dev, pkts_compl, bytes_compl);
> +
>   	if (unlikely(netif_queue_stopped(priv->dev) &&
>   		     stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) {
>   		netif_tx_lock(priv->dev);
> @@ -1418,6 +1425,7 @@ static void stmmac_tx_err(struct stmmac_priv *priv)
>   						     (i == txsize - 1));
>   	priv->dirty_tx = 0;
>   	priv->cur_tx = 0;
> +	netdev_reset_queue(priv->dev);
>   	priv->hw->dma->start_tx(priv->ioaddr);
>
>   	priv->dev->stats.tx_errors++;
> @@ -2048,6 +2056,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
>   	if (!priv->hwts_tx_en)
>   		skb_tx_timestamp(skb);
>
> +	netdev_sent_queue(dev, skb->len);
>   	priv->hw->dma->enable_dma_transmission(priv->ioaddr);
>
>   	spin_unlock(&priv->tx_lock);
>


  parent reply	other threads:[~2015-01-22 11:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-21 18:07 [PATCH v2] net: stmmac: add BQL support Beniamino Galvani
2015-01-21 18:37 ` Eric Dumazet
2015-01-22 11:58 ` Giuseppe CAVALLARO [this message]
2015-01-26 23:22 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54C0E5CA.80902@st.com \
    --to=peppe.cavallaro@st.com \
    --cc=b.galvani@gmail.com \
    --cc=dave.taht@gmail.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox