* [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-22 16:47 ` Sylwester Nawrocki
2015-01-23 17:40 ` Sylwester Nawrocki
2015-01-21 6:26 ` [PATCH v3 02/12] clk: samsung: exynos5433: Add MUX clocks of CMU_TOP domain Chanwoo Choi
` (10 subsequent siblings)
11 siblings, 2 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the support for CMU (Clock Management Units) of Exynos5433
which is 64bit SoC and has Octa-cores. This patch supports necessary clocks
(PLL/MMC/UART/MCT/I2C/SPI) for kernel boot and includes binding documentation
for Exynos5433 clock controller.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 106 +++
drivers/clk/samsung/Makefile | 1 +
drivers/clk/samsung/clk-exynos5433.c | 963 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 199 +++++
4 files changed, 1269 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/exynos5433-clock.txt
create mode 100644 drivers/clk/samsung/clk-exynos5433.c
create mode 100644 include/dt-bindings/clock/exynos5433.h
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
new file mode 100644
index 0000000..72cd0ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -0,0 +1,106 @@
+* Samsung Exynos5433 CMU (Clock Management Units)
+
+The Exynos5433 clock controller generates and supplies clock to various
+controllers within the Exynos5433 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+ - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP
+ which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
+ domains and bus clocks.
+ - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF
+ which generates clocks for LLI (Low Latency Interface) IP.
+ - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF
+ which generates clocks for DRAM Memory Controller domain.
+ - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
+ which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
+ - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
+ which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
+ - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
+ which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5433.h header and can be used in device
+tree sources.
+
+Example 1: Examples of clock controller nodes are listed below.
+
+ cmu_top: clock-controller@0x10030000 {
+ compatible = "samsung,exynos5433-cmu-top";
+ reg = <0x10030000 0x0c04>;
+ #clock-cells = <1>;
+ };
+
+ cmu_cpif: clock-controller@0x10fc0000 {
+ compatible = "samsung,exynos5433-cmu-cpif";
+ reg = <0x10fc0000 0x0c04>;
+ #clock-cells = <1>;
+ };
+
+ cmu_mif: clock-controller@0x105b0000 {
+ compatible = "samsung,exynos5433-cmu-mif";
+ reg = <0x105b0000 0x100c>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peric: clock-controller@0x14c80000 {
+ compatible = "samsung,exynos5433-cmu-peric";
+ reg = <0x14c80000 0x0b08>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peris: clock-controller@0x10040000 {
+ compatible = "samsung,exynos5433-cmu-peris";
+ reg = <0x10040000 0x0b20>;
+ #clock-cells = <1>;
+ };
+
+ cmu_fsys: clock-controller@0x156e0000 {
+ compatible = "samsung,exynos5433-cmu-fsys";
+ reg = <0x156e0000 0x0b04>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller.
+
+ serial_0: serial@14C10000 {
+ compatible = "samsung,exynos5433-uart";
+ reg = <0x14C10000 0x100>;
+ interrupts = <0 421 0>;
+ clocks = <&cmu_peric CLK_PCLK_UART0>,
+ <&cmu_peric CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ status = "disabled";
+ };
+
+Example 3: SPI controller node that consumes the clock generated by the clock
+ controller.
+
+ spi_0: spi@14d20000 {
+ compatible = "samsung,exynos7-spi";
+ reg = <0x14d20000 0x100>;
+ interrupts = <0 432 0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_peric CLK_PCLK_SPI0>,
+ <&cmu_top CLK_SCLK_SPI0_PERIC>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ status = "disabled";
+ };
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 006c6f2..17e9af7 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
obj-$(CONFIG_SOC_EXYNOS5260) += clk-exynos5260.o
obj-$(CONFIG_SOC_EXYNOS5410) += clk-exynos5410.o
obj-$(CONFIG_SOC_EXYNOS5420) += clk-exynos5420.o
+obj-$(CONFIG_ARCH_EXYNOS5433) += clk-exynos5433.o
obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-audss.o
obj-$(CONFIG_ARCH_EXYNOS) += clk-exynos-clkout.o
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
new file mode 100644
index 0000000..59a87bc
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -0,0 +1,963 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5443 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include <dt-bindings/clock/exynos5433.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+/*
+ * Register offset definitions for CMU_TOP
+ */
+#define ISP_PLL_LOCK 0x0000
+#define AUD_PLL_LOCK 0x0004
+#define ISP_PLL_CON0 0x0100
+#define ISP_PLL_CON1 0x0104
+#define ISP_PLL_FREQ_DET 0x0108
+#define AUD_PLL_CON0 0x0110
+#define AUD_PLL_CON1 0x0114
+#define AUD_PLL_CON2 0x0118
+#define AUD_PLL_FREQ_DET 0x011c
+#define MUX_SEL_TOP0 0x0200
+#define MUX_SEL_TOP1 0x0204
+#define MUX_SEL_TOP2 0x0208
+#define MUX_SEL_TOP3 0x020c
+#define MUX_SEL_TOP4 0x0210
+#define MUX_SEL_TOP_MSCL 0x0220
+#define MUX_SEL_TOP_CAM1 0x0224
+#define MUX_SEL_TOP_DISP 0x0228
+#define MUX_SEL_TOP_FSYS0 0x0230
+#define MUX_SEL_TOP_FSYS1 0x0234
+#define MUX_SEL_TOP_PERIC0 0x0238
+#define MUX_SEL_TOP_PERIC1 0x023c
+#define MUX_ENABLE_TOP0 0x0300
+#define MUX_ENABLE_TOP1 0x0304
+#define MUX_ENABLE_TOP2 0x0308
+#define MUX_ENABLE_TOP3 0x030c
+#define MUX_ENABLE_TOP4 0x0310
+#define MUX_ENABLE_TOP_MSCL 0x0320
+#define MUX_ENABLE_TOP_CAM1 0x0324
+#define MUX_ENABLE_TOP_DISP 0x0328
+#define MUX_ENABLE_TOP_FSYS0 0x0330
+#define MUX_ENABLE_TOP_FSYS1 0x0334
+#define MUX_ENABLE_TOP_PERIC0 0x0338
+#define MUX_ENABLE_TOP_PERIC1 0x033c
+#define MUX_STAT_TOP0 0x0400
+#define MUX_STAT_TOP1 0x0404
+#define MUX_STAT_TOP2 0x0408
+#define MUX_STAT_TOP3 0x040c
+#define MUX_STAT_TOP4 0x0410
+#define MUX_STAT_TOP_MSCL 0x0420
+#define MUX_STAT_TOP_CAM1 0x0424
+#define MUX_STAT_TOP_FSYS0 0x0430
+#define MUX_STAT_TOP_FSYS1 0x0434
+#define MUX_STAT_TOP_PERIC0 0x0438
+#define MUX_STAT_TOP_PERIC1 0x043c
+#define DIV_TOP0 0x0600
+#define DIV_TOP1 0x0604
+#define DIV_TOP2 0x0608
+#define DIV_TOP3 0x060c
+#define DIV_TOP4 0x0610
+#define DIV_TOP_MSCL 0x0618
+#define DIV_TOP_CAM10 0x061c
+#define DIV_TOP_CAM11 0x0620
+#define DIV_TOP_FSYS0 0x062c
+#define DIV_TOP_FSYS1 0x0630
+#define DIV_TOP_FSYS2 0x0634
+#define DIV_TOP_PERIC0 0x0638
+#define DIV_TOP_PERIC1 0x063c
+#define DIV_TOP_PERIC2 0x0640
+#define DIV_TOP_PERIC3 0x0644
+#define DIV_TOP_PERIC4 0x0648
+#define DIV_TOP_PLL_FREQ_DET 0x064c
+#define DIV_STAT_TOP0 0x0700
+#define DIV_STAT_TOP1 0x0704
+#define DIV_STAT_TOP2 0x0708
+#define DIV_STAT_TOP3 0x070c
+#define DIV_STAT_TOP4 0x0710
+#define DIV_STAT_TOP_MSCL 0x0718
+#define DIV_STAT_TOP_CAM10 0x071c
+#define DIV_STAT_TOP_CAM11 0x0720
+#define DIV_STAT_TOP_FSYS0 0x072c
+#define DIV_STAT_TOP_FSYS1 0x0730
+#define DIV_STAT_TOP_FSYS2 0x0734
+#define DIV_STAT_TOP_PERIC0 0x0738
+#define DIV_STAT_TOP_PERIC1 0x073c
+#define DIV_STAT_TOP_PERIC2 0x0740
+#define DIV_STAT_TOP_PERIC3 0x0744
+#define DIV_STAT_TOP_PLL_FREQ_DET 0x074c
+#define ENABLE_ACLK_TOP 0x0800
+#define ENABLE_SCLK_TOP 0x0a00
+#define ENABLE_SCLK_TOP_MSCL 0x0a04
+#define ENABLE_SCLK_TOP_CAM1 0x0a08
+#define ENABLE_SCLK_TOP_DISP 0x0a0c
+#define ENABLE_SCLK_TOP_FSYS 0x0a10
+#define ENABLE_SCLK_TOP_PERIC 0x0a14
+#define ENABLE_IP_TOP 0x0b00
+#define ENABLE_CMU_TOP 0x0c00
+#define ENABLE_CMU_TOP_DIV_STAT 0x0c04
+
+static unsigned long top_clk_regs[] __initdata = {
+ ISP_PLL_LOCK,
+ AUD_PLL_LOCK,
+ ISP_PLL_CON0,
+ ISP_PLL_CON1,
+ ISP_PLL_FREQ_DET,
+ AUD_PLL_CON0,
+ AUD_PLL_CON1,
+ AUD_PLL_CON2,
+ AUD_PLL_FREQ_DET,
+ MUX_SEL_TOP0,
+ MUX_SEL_TOP1,
+ MUX_SEL_TOP2,
+ MUX_SEL_TOP3,
+ MUX_SEL_TOP4,
+ MUX_SEL_TOP_MSCL,
+ MUX_SEL_TOP_CAM1,
+ MUX_SEL_TOP_DISP,
+ MUX_SEL_TOP_FSYS0,
+ MUX_SEL_TOP_FSYS1,
+ MUX_SEL_TOP_PERIC0,
+ MUX_SEL_TOP_PERIC1,
+ MUX_ENABLE_TOP0,
+ MUX_ENABLE_TOP1,
+ MUX_ENABLE_TOP2,
+ MUX_ENABLE_TOP3,
+ MUX_ENABLE_TOP4,
+ MUX_ENABLE_TOP_MSCL,
+ MUX_ENABLE_TOP_CAM1,
+ MUX_ENABLE_TOP_DISP,
+ MUX_ENABLE_TOP_FSYS0,
+ MUX_ENABLE_TOP_FSYS1,
+ MUX_ENABLE_TOP_PERIC0,
+ MUX_ENABLE_TOP_PERIC1,
+ MUX_STAT_TOP0,
+ MUX_STAT_TOP1,
+ MUX_STAT_TOP2,
+ MUX_STAT_TOP3,
+ MUX_STAT_TOP4,
+ MUX_STAT_TOP_MSCL,
+ MUX_STAT_TOP_CAM1,
+ MUX_STAT_TOP_FSYS0,
+ MUX_STAT_TOP_FSYS1,
+ MUX_STAT_TOP_PERIC0,
+ MUX_STAT_TOP_PERIC1,
+ DIV_TOP0,
+ DIV_TOP1,
+ DIV_TOP2,
+ DIV_TOP3,
+ DIV_TOP4,
+ DIV_TOP_MSCL,
+ DIV_TOP_CAM10,
+ DIV_TOP_CAM11,
+ DIV_TOP_FSYS0,
+ DIV_TOP_FSYS1,
+ DIV_TOP_FSYS2,
+ DIV_TOP_PERIC0,
+ DIV_TOP_PERIC1,
+ DIV_TOP_PERIC2,
+ DIV_TOP_PERIC3,
+ DIV_TOP_PERIC4,
+ DIV_TOP_PLL_FREQ_DET,
+ DIV_STAT_TOP0,
+ DIV_STAT_TOP1,
+ DIV_STAT_TOP2,
+ DIV_STAT_TOP3,
+ DIV_STAT_TOP4,
+ DIV_STAT_TOP_MSCL,
+ DIV_STAT_TOP_CAM10,
+ DIV_STAT_TOP_CAM11,
+ DIV_STAT_TOP_FSYS0,
+ DIV_STAT_TOP_FSYS1,
+ DIV_STAT_TOP_FSYS2,
+ DIV_STAT_TOP_PERIC0,
+ DIV_STAT_TOP_PERIC1,
+ DIV_STAT_TOP_PERIC2,
+ DIV_STAT_TOP_PERIC3,
+ DIV_STAT_TOP_PLL_FREQ_DET,
+ ENABLE_ACLK_TOP,
+ ENABLE_SCLK_TOP,
+ ENABLE_SCLK_TOP_MSCL,
+ ENABLE_SCLK_TOP_CAM1,
+ ENABLE_SCLK_TOP_DISP,
+ ENABLE_SCLK_TOP_FSYS,
+ ENABLE_SCLK_TOP_PERIC,
+ ENABLE_IP_TOP,
+ ENABLE_CMU_TOP,
+ ENABLE_CMU_TOP_DIV_STAT,
+};
+
+/* list of all parent clock list */
+PNAME(mout_aud_pll_p) = { "fin_pll", "fout_aud_pll", };
+PNAME(mout_isp_pll_p) = { "fin_pll", "fout_isp_pll", };
+PNAME(mout_aud_pll_user_p) = { "fin_pll", "mout_aud_pll", };
+PNAME(mout_mphy_pll_user_p) = { "fin_pll", "sclk_mphy_pll", };
+PNAME(mout_mfc_pll_user_p) = { "fin_pll", "sclk_mfc_pll", };
+PNAME(mout_bus_pll_user_p) = { "fin_pll", "sclk_bus_pll", };
+PNAME(mout_bus_pll_user_t_p) = { "fin_pll", "mout_bus_pll_user", };
+
+PNAME(mout_bus_mfc_pll_user_p) = { "mout_bus_pll_user", "mout_mfc_pll_user",};
+PNAME(mout_mfc_bus_pll_user_p) = { "mout_mfc_pll_user", "mout_bus_pll_user",};
+PNAME(mout_aclk_cam1_552_b_p) = { "mout_aclk_cam1_552_a",
+ "mout_mfc_pll_user", };
+PNAME(mout_aclk_cam1_552_a_p) = { "mout_isp_pll", "mout_bus_pll_user", };
+
+PNAME(mout_bus_mphy_pll_user_p) = { "mout_bus_pll_user",
+ "mout_mphy_pll_user", };
+PNAME(mout_aclk_mscl_b_p) = { "mout_aclk_mscl_400_a",
+ "mout_mphy_pll_user", };
+PNAME(mout_aclk_g2d_400_b_p) = { "mout_aclk_g2d_400_a",
+ "mout_mphy_pll_user", };
+
+PNAME(mout_sclk_jpeg_c_p) = { "mout_sclk_jpeg_b", "mout_mphy_pll_user",};
+PNAME(mout_sclk_jpeg_b_p) = { "mout_sclk_jpeg_a", "mout_mfc_pll_user", };
+
+PNAME(mout_sclk_mmc2_b_p) = { "mout_sclk_mmc2_a", "mout_mfc_pll_user",};
+PNAME(mout_sclk_mmc1_b_p) = { "mout_sclk_mmc1_a", "mout_mfc_pll_user",};
+PNAME(mout_sclk_mmc0_d_p) = { "mout_sclk_mmc0_c", "mout_isp_pll", };
+PNAME(mout_sclk_mmc0_c_p) = { "mout_sclk_mmc0_b", "mout_mphy_pll_user",};
+PNAME(mout_sclk_mmc0_b_p) = { "mout_sclk_mmc0_a", "mout_mfc_pll_user", };
+
+static struct samsung_mux_clock top_mux_clks[] __initdata = {
+ /* MUX_SEL_TOP0 */
+ MUX(CLK_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p, MUX_SEL_TOP0,
+ 4, 1),
+ MUX(CLK_MOUT_ISP_PLL, "mout_isp_pll", mout_isp_pll_p, MUX_SEL_TOP0,
+ 0, 1),
+
+ /* MUX_SEL_TOP1 */
+ MUX(CLK_MOUT_AUD_PLL_USER_T, "mout_aud_pll_user_t",
+ mout_aud_pll_user_p, MUX_SEL_TOP1, 12, 1),
+ MUX(CLK_MOUT_MPHY_PLL_USER, "mout_mphy_pll_user", mout_mphy_pll_user_p,
+ MUX_SEL_TOP1, 8, 1),
+ MUX(CLK_MOUT_MFC_PLL_USER, "mout_mfc_pll_user", mout_mfc_pll_user_p,
+ MUX_SEL_TOP1, 4, 1),
+ MUX(CLK_MOUT_BUS_PLL_USER, "mout_bus_pll_user", mout_bus_pll_user_p,
+ MUX_SEL_TOP1, 0, 1),
+
+ /* MUX_SEL_TOP2 */
+ MUX(CLK_MOUT_ACLK_HEVC_400, "mout_aclk_hevc_400",
+ mout_bus_mfc_pll_user_p, MUX_SEL_TOP2, 28, 1),
+ MUX(CLK_MOUT_ACLK_CAM1_333, "mout_aclk_cam1_333",
+ mout_mfc_bus_pll_user_p, MUX_SEL_TOP2, 16, 1),
+ MUX(CLK_MOUT_ACLK_CAM1_552_B, "mout_aclk_cam1_552_b",
+ mout_aclk_cam1_552_b_p, MUX_SEL_TOP2, 12, 1),
+ MUX(CLK_MOUT_ACLK_CAM1_552_A, "mout_aclk_cam1_552_a",
+ mout_aclk_cam1_552_a_p, MUX_SEL_TOP2, 8, 1),
+ MUX(CLK_MOUT_ACLK_ISP_DIS_400, "mout_aclk_isp_dis_400",
+ mout_bus_mfc_pll_user_p, MUX_SEL_TOP2, 4, 1),
+ MUX(CLK_MOUT_ACLK_ISP_400, "mout_aclk_isp_400",
+ mout_bus_mfc_pll_user_p, MUX_SEL_TOP2, 0, 1),
+
+ /* MUX_SEL_TOP3 */
+ MUX(CLK_MOUT_ACLK_BUS0_400, "mout_aclk_bus0_400",
+ mout_bus_mphy_pll_user_p, MUX_SEL_TOP3, 20, 1),
+ MUX(CLK_MOUT_ACLK_MSCL_400_B, "mout_aclk_mscl_400_b",
+ mout_aclk_mscl_b_p, MUX_SEL_TOP3, 16, 1),
+ MUX(CLK_MOUT_ACLK_MSCL_400_A, "mout_aclk_mscl_400_a",
+ mout_bus_mfc_pll_user_p, MUX_SEL_TOP3, 12, 1),
+ MUX(CLK_MOUT_ACLK_GSCL_333, "mout_aclk_gscl_333",
+ mout_mfc_bus_pll_user_p, MUX_SEL_TOP3, 8, 1),
+ MUX(CLK_MOUT_ACLK_G2D_400_B, "mout_aclk_g2d_400_b",
+ mout_aclk_g2d_400_b_p, MUX_SEL_TOP3, 4, 1),
+ MUX(CLK_MOUT_ACLK_G2D_400_A, "mout_aclk_g2d_400_a",
+ mout_bus_mfc_pll_user_p, MUX_SEL_TOP3, 0, 1),
+
+ /* MUX_SEL_TOP_MSCL */
+ MUX(CLK_MOUT_SCLK_JPEG_C, "mout_sclk_jpeg_c", mout_sclk_jpeg_c_p,
+ MUX_SEL_TOP_MSCL, 8, 1),
+ MUX(CLK_MOUT_SCLK_JPEG_B, "mout_sclk_jpeg_b", mout_sclk_jpeg_b_p,
+ MUX_SEL_TOP_MSCL, 4, 1),
+ MUX(CLK_MOUT_SCLK_JPEG_A, "mout_sclk_jpeg_a", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_MSCL, 0, 1),
+
+ /* MUX_SEL_TOP_FSYS0 */
+ MUX(CLK_MOUT_SCLK_MMC2_B, "mout_sclk_mmc2_b", mout_sclk_mmc2_b_p,
+ MUX_SEL_TOP_FSYS0, 28, 1),
+ MUX(CLK_MOUT_SCLK_MMC2_A, "mout_sclk_mmc2_a", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_FSYS0, 24, 1),
+ MUX(CLK_MOUT_SCLK_MMC1_B, "mout_sclk_mmc1_b", mout_sclk_mmc1_b_p,
+ MUX_SEL_TOP_FSYS0, 20, 1),
+ MUX(CLK_MOUT_SCLK_MMC1_A, "mout_sclk_mmc1_a", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_FSYS0, 16, 1),
+ MUX(CLK_MOUT_SCLK_MMC0_D, "mout_sclk_mmc0_d", mout_sclk_mmc0_d_p,
+ MUX_SEL_TOP_FSYS0, 12, 1),
+ MUX(CLK_MOUT_SCLK_MMC0_C, "mout_sclk_mmc0_c", mout_sclk_mmc0_c_p,
+ MUX_SEL_TOP_FSYS0, 8, 1),
+ MUX(CLK_MOUT_SCLK_MMC0_B, "mout_sclk_mmc0_b", mout_sclk_mmc0_b_p,
+ MUX_SEL_TOP_FSYS0, 4, 1),
+ MUX(CLK_MOUT_SCLK_MMC0_A, "mout_sclk_mmc0_a", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_FSYS0, 0, 1),
+
+ /* MUX_SEL_TOP_PERIC0 */
+ MUX(CLK_MOUT_SCLK_SPI4, "mout_sclk_spi4", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 28, 1),
+ MUX(CLK_MOUT_SCLK_SPI3, "mout_sclk_spi3", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 24, 1),
+ MUX(CLK_MOUT_SCLK_UART2, "mout_sclk_uart2", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 20, 1),
+ MUX(CLK_MOUT_SCLK_UART1, "mout_sclk_uart1", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 16, 1),
+ MUX(CLK_MOUT_SCLK_UART0, "mout_sclk_uart0", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 12, 1),
+ MUX(CLK_MOUT_SCLK_SPI2, "mout_sclk_spi2", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 8, 1),
+ MUX(CLK_MOUT_SCLK_SPI1, "mout_sclk_spi1", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 4, 1),
+ MUX(CLK_MOUT_SCLK_SPI0, "mout_sclk_spi0", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_PERIC0, 0, 1),
+};
+
+static struct samsung_div_clock top_div_clks[] __initdata = {
+ /* DIV_TOP2 */
+ DIV(CLK_DIV_ACLK_FSYS_200, "div_aclk_fsys_200", "mout_bus_pll_user",
+ DIV_TOP2, 0, 3),
+
+ /* DIV_TOP3 */
+ DIV(CLK_DIV_ACLK_IMEM_SSSX_266, "div_aclk_imem_sssx_266",
+ "mout_bus_pll_user", DIV_TOP3, 24, 3),
+ DIV(CLK_DIV_ACLK_IMEM_200, "div_aclk_imem_200",
+ "mout_bus_pll_user", DIV_TOP3, 20, 3),
+ DIV(CLK_DIV_ACLK_IMEM_266, "div_aclk_imem_266",
+ "mout_bus_pll_user", DIV_TOP3, 16, 3),
+ DIV(CLK_DIV_ACLK_PERIC_66_B, "div_aclk_peric_66_b",
+ "div_aclk_peric_66_a", DIV_TOP3, 12, 3),
+ DIV(CLK_DIV_ACLK_PERIC_66_A, "div_aclk_peric_66_a",
+ "mout_bus_pll_user", DIV_TOP3, 8, 3),
+ DIV(CLK_DIV_ACLK_PERIS_66_B, "div_aclk_peris_66_b",
+ "div_aclk_peris_66_a", DIV_TOP3, 4, 3),
+ DIV(CLK_DIV_ACLK_PERIS_66_A, "div_aclk_peris_66_a",
+ "mout_bus_pll_user", DIV_TOP3, 0, 3),
+
+ /* DIV_TOP_FSYS0 */
+ DIV(CLK_DIV_SCLK_MMC1_B, "div_sclk_mmc1_b", "div_sclk_mmc1_a",
+ DIV_TOP_FSYS0, 16, 8),
+ DIV(CLK_DIV_SCLK_MMC1_A, "div_sclk_mmc1_a", "mout_sclk_mmc1_b",
+ DIV_TOP_FSYS0, 12, 4),
+ DIV_F(CLK_DIV_SCLK_MMC0_B, "div_sclk_mmc0_b", "div_sclk_mmc0_a",
+ DIV_TOP_FSYS0, 4, 8, CLK_SET_RATE_PARENT, 0),
+ DIV_F(CLK_DIV_SCLK_MMC0_A, "div_sclk_mmc0_a", "mout_sclk_mmc0_d",
+ DIV_TOP_FSYS0, 0, 4, CLK_SET_RATE_PARENT, 0),
+
+ /* DIV_TOP_FSYS1 */
+ DIV(CLK_DIV_SCLK_MMC2_B, "div_sclk_mmc2_b", "div_sclk_mmc2_a",
+ DIV_TOP_FSYS1, 4, 8),
+ DIV(CLK_DIV_SCLK_MMC2_A, "div_sclk_mmc2_a", "mout_sclk_mmc2_b",
+ DIV_TOP_FSYS1, 0, 4),
+
+ /* DIV_TOP_PERIC0 */
+ DIV(CLK_DIV_SCLK_SPI1_B, "div_sclk_spi1_b", "div_sclk_spi1_a",
+ DIV_TOP_PERIC0, 16, 8),
+ DIV(CLK_DIV_SCLK_SPI1_A, "div_sclk_spi1_a", "mout_sclk_spi1",
+ DIV_TOP_PERIC0, 12, 4),
+ DIV(CLK_DIV_SCLK_SPI0_B, "div_sclk_spi0_b", "div_sclk_spi0_a",
+ DIV_TOP_PERIC0, 4, 8),
+ DIV(CLK_DIV_SCLK_SPI0_A, "div_sclk_spi0_a", "mout_sclk_spi0",
+ DIV_TOP_PERIC0, 0, 4),
+
+ /* DIV_TOP_PERIC1 */
+ DIV(CLK_DIV_SCLK_SPI2_B, "div_sclk_spi2_b", "div_sclk_spi2_a",
+ DIV_TOP_PERIC1, 4, 8),
+ DIV(CLK_DIV_SCLK_SPI2_A, "div_sclk_spi2_a", "mout_sclk_spi2",
+ DIV_TOP_PERIC1, 0, 4),
+
+ /* DIV_TOP_PERIC2 */
+ DIV(CLK_DIV_SCLK_UART2, "div_sclk_uart2", "mout_sclk_uart2",
+ DIV_TOP_PERIC2, 8, 4),
+ DIV(CLK_DIV_SCLK_UART1, "div_sclk_uart1", "mout_sclk_uart0",
+ DIV_TOP_PERIC2, 4, 4),
+ DIV(CLK_DIV_SCLK_UART0, "div_sclk_uart0", "mout_sclk_uart1",
+ DIV_TOP_PERIC2, 0, 4),
+
+ /* DIV_TOP_PERIC4 */
+ DIV(CLK_DIV_SCLK_SPI4_B, "div_sclk_spi4_b", "div_sclk_spi4_a",
+ DIV_TOP_PERIC4, 16, 8),
+ DIV(CLK_DIV_SCLK_SPI4_A, "div_sclk_spi4_a", "mout_sclk_spi4",
+ DIV_TOP_PERIC4, 12, 4),
+ DIV(CLK_DIV_SCLK_SPI3_B, "div_sclk_spi3_b", "div_sclk_spi3_a",
+ DIV_TOP_PERIC4, 4, 8),
+ DIV(CLK_DIV_SCLK_SPI3_A, "div_sclk_spi3_a", "mout_sclk_spi3",
+ DIV_TOP_PERIC4, 0, 4),
+};
+
+static struct samsung_gate_clock top_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_TOP */
+ GATE(CLK_ACLK_PERIC_66, "aclk_peric_66", "div_aclk_peric_66_b",
+ ENABLE_ACLK_TOP, 22,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PERIS_66, "aclk_peris_66", "div_aclk_peris_66_b",
+ ENABLE_ACLK_TOP, 21,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_FSYS_200, "aclk_fsys_200", "div_aclk_fsys_200",
+ ENABLE_ACLK_TOP, 18,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_SCLK_TOP_FSYS */
+ GATE(CLK_SCLK_MMC2_FSYS, "sclk_mmc2_fsys", "div_sclk_mmc2_b",
+ ENABLE_SCLK_TOP_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC1_FSYS, "sclk_mmc1_fsys", "div_sclk_mmc1_b",
+ ENABLE_SCLK_TOP_FSYS, 5, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC0_FSYS, "sclk_mmc0_fsys", "div_sclk_mmc0_b",
+ ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+
+ /* ENABLE_SCLK_TOP_PERIC */
+ GATE(CLK_SCLK_SPI4_PERIC, "sclk_spi4_peric", "div_sclk_spi4_b",
+ ENABLE_SCLK_TOP_PERIC, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI3_PERIC, "sclk_spi3_peric", "div_sclk_spi3_b",
+ ENABLE_SCLK_TOP_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART2_PERIC, "sclk_uart2_peric", "div_sclk_uart2",
+ ENABLE_SCLK_TOP_PERIC, 5, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART1_PERIC, "sclk_uart1_peric", "div_sclk_uart1",
+ ENABLE_SCLK_TOP_PERIC, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART0_PERIC, "sclk_uart0_peric", "div_sclk_uart0",
+ ENABLE_SCLK_TOP_PERIC, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI2_PERIC, "sclk_spi2_peric", "div_sclk_spi2_b",
+ ENABLE_SCLK_TOP_PERIC, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1_PERIC, "sclk_spi1_peric", "div_sclk_spi1_b",
+ ENABLE_SCLK_TOP_PERIC, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0_PERIC, "sclk_spi0_peric", "div_sclk_spi0_b",
+ ENABLE_SCLK_TOP_PERIC, 0, CLK_SET_RATE_PARENT, 0),
+};
+
+/*
+ * ATLAS_PLL & APOLLO_PLL & MEM0_PLL & MEM1_PLL & BUS_PLL & MFC_PLL
+ * & MPHY_PLL & G3D_PLL & DISP_PLL & ISP_PLL
+ */
+static struct samsung_pll_rate_table exynos5443_pll_rates[] = {
+ PLL_35XX_RATE(2500000000, 625, 6, 0),
+ PLL_35XX_RATE(2400000000, 500, 5, 0),
+ PLL_35XX_RATE(2300000000, 575, 6, 0),
+ PLL_35XX_RATE(2200000000, 550, 6, 0),
+ PLL_35XX_RATE(2100000000, 350, 4, 0),
+ PLL_35XX_RATE(2000000000, 500, 6, 0),
+ PLL_35XX_RATE(1900000000, 475, 6, 0),
+ PLL_35XX_RATE(1800000000, 375, 5, 0),
+ PLL_35XX_RATE(1700000000, 425, 6, 0),
+ PLL_35XX_RATE(1600000000, 400, 6, 0),
+ PLL_35XX_RATE(1500000000, 250, 4, 0),
+ PLL_35XX_RATE(1400000000, 350, 6, 0),
+ PLL_35XX_RATE(1332000000, 222, 4, 0),
+ PLL_35XX_RATE(1300000000, 325, 6, 0),
+ PLL_35XX_RATE(1200000000, 500, 5, 1),
+ PLL_35XX_RATE(1100000000, 550, 6, 1),
+ PLL_35XX_RATE(1086000000, 362, 4, 1),
+ PLL_35XX_RATE(1066000000, 533, 6, 1),
+ PLL_35XX_RATE(1000000000, 500, 6, 1),
+ PLL_35XX_RATE(933000000, 311, 4, 1),
+ PLL_35XX_RATE(921000000, 307, 4, 1),
+ PLL_35XX_RATE(900000000, 375, 5, 1),
+ PLL_35XX_RATE(825000000, 275, 4, 1),
+ PLL_35XX_RATE(800000000, 400, 6, 1),
+ PLL_35XX_RATE(733000000, 733, 12, 1),
+ PLL_35XX_RATE(700000000, 360, 6, 1),
+ PLL_35XX_RATE(667000000, 222, 4, 1),
+ PLL_35XX_RATE(633000000, 211, 4, 1),
+ PLL_35XX_RATE(600000000, 500, 5, 2),
+ PLL_35XX_RATE(552000000, 460, 5, 2),
+ PLL_35XX_RATE(550000000, 550, 6, 2),
+ PLL_35XX_RATE(543000000, 362, 4, 2),
+ PLL_35XX_RATE(533000000, 533, 6, 2),
+ PLL_35XX_RATE(500000000, 500, 6, 2),
+ PLL_35XX_RATE(444000000, 370, 5, 2),
+ PLL_35XX_RATE(420000000, 350, 5, 2),
+ PLL_35XX_RATE(400000000, 400, 6, 2),
+ PLL_35XX_RATE(350000000, 360, 6, 2),
+ PLL_35XX_RATE(333000000, 222, 4, 2),
+ PLL_35XX_RATE(300000000, 500, 5, 3),
+ PLL_35XX_RATE(266000000, 532, 6, 3),
+ PLL_35XX_RATE(200000000, 400, 6, 3),
+ PLL_35XX_RATE(166000000, 332, 6, 3),
+ PLL_35XX_RATE(160000000, 320, 6, 3),
+ PLL_35XX_RATE(133000000, 552, 6, 4),
+ PLL_35XX_RATE(100000000, 400, 6, 4),
+ { /* sentinel */ }
+};
+
+/* AUD_PLL */
+static struct samsung_pll_rate_table exynos5443_aud_pll_rates[] = {
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(393216000, 197, 3, 2, -25690),
+ PLL_36XX_RATE(384000000, 128, 2, 2, 0),
+ PLL_36XX_RATE(368640000, 246, 4, 2, -15729),
+ PLL_36XX_RATE(361507200, 181, 3, 2, -16148),
+ PLL_36XX_RATE(338688000, 113, 2, 2, -6816),
+ PLL_36XX_RATE(294912000, 98, 1, 3, 19923),
+ PLL_36XX_RATE(288000000, 96, 1, 3, 0),
+ PLL_36XX_RATE(252000000, 84, 1, 3, 0),
+ { /* sentinel */ }
+};
+
+static struct samsung_pll_clock top_pll_clks[] __initdata = {
+ PLL(pll_35xx, CLK_FOUT_ISP_PLL, "fout_isp_pll", "fin_pll",
+ ISP_PLL_LOCK, ISP_PLL_CON0, exynos5443_pll_rates),
+ PLL(pll_36xx, CLK_FOUT_AUD_PLL, "fout_aud_pll", "fin_pll",
+ AUD_PLL_LOCK, AUD_PLL_CON0, exynos5443_aud_pll_rates),
+};
+
+static struct samsung_cmu_info top_cmu_info __initdata = {
+ .pll_clks = top_pll_clks,
+ .nr_pll_clks = ARRAY_SIZE(top_pll_clks),
+ .mux_clks = top_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(top_mux_clks),
+ .div_clks = top_div_clks,
+ .nr_div_clks = ARRAY_SIZE(top_div_clks),
+ .gate_clks = top_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(top_gate_clks),
+ .nr_clk_ids = TOP_NR_CLK,
+ .clk_regs = top_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(top_clk_regs),
+};
+
+static void __init exynos5433_cmu_top_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &top_cmu_info);
+}
+CLK_OF_DECLARE(exynos5433_cmu_top, "samsung,exynos5433-cmu-top",
+ exynos5433_cmu_top_init);
+
+/*
+ * Register offset definitions for CMU_CPIF
+ */
+#define MPHY_PLL_LOCK 0x0000
+#define MPHY_PLL_CON0 0x0100
+#define MPHY_PLL_CON1 0x0104
+#define MPHY_PLL_FREQ_DET 0x010c
+#define MUX_SEL_CPIF0 0x0200
+#define DIV_CPIF 0x0600
+#define ENABLE_SCLK_CPIF 0x0a00
+
+static unsigned long cpif_clk_regs[] __initdata = {
+ MPHY_PLL_LOCK,
+ MPHY_PLL_CON0,
+ MPHY_PLL_CON1,
+ MPHY_PLL_FREQ_DET,
+ MUX_SEL_CPIF0,
+ ENABLE_SCLK_CPIF,
+};
+
+/* list of all parent clock list */
+PNAME(mout_mphy_pll_p) = { "fin_pll", "fout_mphy_pll", };
+
+static struct samsung_pll_clock cpif_pll_clks[] __initdata = {
+ PLL(pll_35xx, CLK_FOUT_MPHY_PLL, "fout_mphy_pll", "fin_pll",
+ MPHY_PLL_LOCK, MPHY_PLL_CON0, exynos5443_pll_rates),
+};
+
+static struct samsung_mux_clock cpif_mux_clks[] __initdata = {
+ /* MUX_SEL_CPIF0 */
+ MUX(CLK_MOUT_MPHY_PLL, "mout_mphy_pll", mout_mphy_pll_p, MUX_SEL_CPIF0,
+ 0, 1),
+};
+
+static struct samsung_div_clock cpif_div_clks[] __initdata = {
+ /* DIV_CPIF */
+ DIV(CLK_DIV_SCLK_MPHY, "div_sclk_mphy", "mout_mphy_pll", DIV_CPIF,
+ 0, 6),
+};
+
+static struct samsung_gate_clock cpif_gate_clks[] __initdata = {
+ /* ENABLE_SCLK_CPIF */
+ GATE(CLK_SCLK_MPHY_PLL, "sclk_mphy_pll", "mout_mphy_pll",
+ ENABLE_SCLK_CPIF, 9, 0, 0),
+ GATE(CLK_SCLK_UFS_MPHY, "sclk_ufs_mphy", "div_sclk_mphy",
+ ENABLE_SCLK_CPIF, 4, 0, 0),
+};
+
+static struct samsung_cmu_info cpif_cmu_info __initdata = {
+ .pll_clks = cpif_pll_clks,
+ .nr_pll_clks = ARRAY_SIZE(cpif_pll_clks),
+ .mux_clks = cpif_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(cpif_mux_clks),
+ .div_clks = cpif_div_clks,
+ .nr_div_clks = ARRAY_SIZE(cpif_div_clks),
+ .gate_clks = cpif_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(cpif_gate_clks),
+ .nr_clk_ids = CPIF_NR_CLK,
+ .clk_regs = cpif_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(cpif_clk_regs),
+};
+
+static void __init exynos5433_cmu_cpif_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &cpif_cmu_info);
+}
+CLK_OF_DECLARE(exynos5433_cmu_cpif, "samsung,exynos5433-cmu-cpif",
+ exynos5433_cmu_cpif_init);
+
+/*
+ * Register offset definitions for CMU_MIF
+ */
+#define MEM0_PLL_LOCK 0x0000
+#define MEM1_PLL_LOCK 0x0004
+#define BUS_PLL_LOCK 0x0008
+#define MFC_PLL_LOCK 0x000c
+#define MEM0_PLL_CON0 0x0100
+#define MEM0_PLL_CON1 0x0104
+#define MEM0_PLL_FREQ_DET 0x010c
+#define MEM1_PLL_CON0 0x0110
+#define MEM1_PLL_CON1 0x0114
+#define MEM1_PLL_FREQ_DET 0x011c
+#define BUS_PLL_CON0 0x0120
+#define BUS_PLL_CON1 0x0124
+#define BUS_PLL_FREQ_DET 0x012c
+#define MFC_PLL_CON0 0x0130
+#define MFC_PLL_CON1 0x0134
+#define MFC_PLL_FREQ_DET 0x013c
+
+static unsigned long mif_clk_regs[] __initdata = {
+ MEM0_PLL_LOCK,
+ MEM1_PLL_LOCK,
+ BUS_PLL_LOCK,
+ MFC_PLL_LOCK,
+ MEM0_PLL_CON0,
+ MEM0_PLL_CON1,
+ MEM0_PLL_FREQ_DET,
+ MEM1_PLL_CON0,
+ MEM1_PLL_CON1,
+ MEM1_PLL_FREQ_DET,
+ BUS_PLL_CON0,
+ BUS_PLL_CON1,
+ BUS_PLL_FREQ_DET,
+ MFC_PLL_CON0,
+ MFC_PLL_CON1,
+ MFC_PLL_FREQ_DET,
+};
+
+static struct samsung_pll_clock mif_pll_clks[] __initdata = {
+ PLL(pll_35xx, CLK_FOUT_MEM0_PLL, "fout_mem0_pll", "fin_pll",
+ MEM0_PLL_LOCK, MEM0_PLL_CON0, exynos5443_pll_rates),
+ PLL(pll_35xx, CLK_FOUT_MEM1_PLL, "fout_mem1_pll", "fin_pll",
+ MEM1_PLL_LOCK, MEM1_PLL_CON0, exynos5443_pll_rates),
+ PLL(pll_35xx, CLK_FOUT_BUS_PLL, "fout_bus_pll", "fin_pll",
+ BUS_PLL_LOCK, BUS_PLL_CON0, exynos5443_pll_rates),
+ PLL(pll_35xx, CLK_FOUT_MFC_PLL, "fout_mfc_pll", "fin_pll",
+ MFC_PLL_LOCK, MFC_PLL_CON0, exynos5443_pll_rates),
+};
+
+static struct samsung_cmu_info mif_cmu_info __initdata = {
+ .pll_clks = mif_pll_clks,
+ .nr_pll_clks = ARRAY_SIZE(mif_pll_clks),
+ .nr_clk_ids = MIF_NR_CLK,
+ .clk_regs = mif_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(mif_clk_regs),
+};
+
+static void __init exynos5433_cmu_mif_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &mif_cmu_info);
+}
+CLK_OF_DECLARE(exynos5433_cmu_mif, "samsung,exynos5433-cmu-mif",
+ exynos5433_cmu_mif_init);
+
+/*
+ * Register offset definitions for CMU_PERIC
+ */
+#define DIV_PERIC 0x0600
+#define ENABLE_ACLK_PERIC 0x0800
+#define ENABLE_PCLK_PERIC0 0x0900
+#define ENABLE_PCLK_PERIC1 0x0904
+#define ENABLE_SCLK_PERIC 0x0A00
+#define ENABLE_IP_PERIC0 0x0B00
+#define ENABLE_IP_PERIC1 0x0B04
+#define ENABLE_IP_PERIC2 0x0B08
+
+static unsigned long peric_clk_regs[] __initdata = {
+ DIV_PERIC,
+ ENABLE_ACLK_PERIC,
+ ENABLE_PCLK_PERIC0,
+ ENABLE_PCLK_PERIC1,
+ ENABLE_SCLK_PERIC,
+ ENABLE_IP_PERIC0,
+ ENABLE_IP_PERIC1,
+ ENABLE_IP_PERIC2,
+};
+
+static struct samsung_gate_clock peric_gate_clks[] __initdata = {
+ /* ENABLE_PCLK_PERIC0 */
+ GATE(CLK_PCLK_SPI2, "pclk_spi2", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 23, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_SPI1, "pclk_spi1", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 22, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_SPI0, "pclk_spi0", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 21, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_UART2, "pclk_uart2", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 14, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_UART1, "pclk_uart1", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 13, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_UART0, "pclk_uart0", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 12, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C3, "pclk_hsi2c3", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 11, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C2, "pclk_hsi2c2", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 10, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C1, "pclk_hsi2c1", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C0, "pclk_hsi2c0", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C7, "pclk_i2c7", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 7, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C6, "pclk_i2c6", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C5, "pclk_i2c5", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 5, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C4, "pclk_i2c4", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C3, "pclk_i2c3", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C2, "pclk_i2c2", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C1, "pclk_i2c1", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2C0, "pclk_i2c0", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 0, CLK_SET_RATE_PARENT, 0),
+
+ /* ENABLE_PCLK_PERIC1 */
+ GATE(CLK_PCLK_SPI4, "pclk_spi4", "aclk_peric_66", ENABLE_PCLK_PERIC1,
+ 9, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_SPI3, "pclk_spi3", "aclk_peric_66", ENABLE_PCLK_PERIC1,
+ 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C11, "pclk_hsi2c11", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C10, "pclk_hsi2c10", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C9, "pclk_hsi2c9", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 5, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C8, "pclk_hsi2c8", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C7, "pclk_hsi2c7", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C6, "pclk_hsi2c6", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C5, "pclk_hsi2c5", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_HSI2C4, "pclk_hsi2c4", "aclk_peric_66",
+ ENABLE_PCLK_PERIC1, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* ENABLE_SCLK_PERIC */
+ GATE(CLK_SCLK_SPI4, "sclk_spi4", "sclk_spi4_peric", ENABLE_SCLK_PERIC,
+ 19, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC,
+ 18, CLK_SET_RATE_PARENT, 0),
+
+ GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
+ 5, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
+ 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
+ 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",
+ ENABLE_SCLK_PERIC, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART1, "sclk_uart1", "sclk_uart1_peric",
+ ENABLE_SCLK_PERIC, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART0, "sclk_uart0", "sclk_uart0_peric",
+ ENABLE_SCLK_PERIC, 0, CLK_SET_RATE_PARENT, 0),
+};
+
+static struct samsung_cmu_info peric_cmu_info __initdata = {
+ .gate_clks = peric_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(peric_gate_clks),
+ .nr_clk_ids = PERIC_NR_CLK,
+ .clk_regs = peric_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(peric_clk_regs),
+};
+
+static void __init exynos5433_cmu_peric_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &peric_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos5433_cmu_peric, "samsung,exynos5433-cmu-peric",
+ exynos5433_cmu_peric_init);
+
+/*
+ * Register offset definitions for CMU_PERIS
+ */
+#define ENABLE_ACLK_PERIS 0x0800
+#define ENABLE_PCLK_PERIS 0x0900
+
+static unsigned long peris_clk_regs[] __initdata = {
+ ENABLE_ACLK_PERIS,
+ ENABLE_PCLK_PERIS,
+};
+
+static struct samsung_gate_clock peris_gate_clks[] __initdata = {
+ /* ENABLE_PCLK_PERIS */
+ GATE(CLK_PCLK_HPM_APBIF, "pclk_hpm_apbif", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 30, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_TMU1_APBIF, "pclk_tmu1_apbif", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 24, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_TMU0_APBIF, "pclk_tmu0_apbif", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 23, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PMU_PERIS, "pclk_pmu_peris", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 22, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_PERIS, "pclk_sysreg_peris", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 21, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_CMU_TOP_APBIF, "pclk_cmu_top_apbif", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 20, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_WDT_APOLLO, "pclk_wdt_apollo", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_WDT_ATLAS, "pclk_wdt_atlas", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_MCT, "pclk_mct", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 15, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_HDMI_CEC, "pclk_hdmi_cec", "aclk_peris_66",
+ ENABLE_PCLK_PERIS, 14, CLK_IGNORE_UNUSED, 0),
+};
+
+static struct samsung_cmu_info peris_cmu_info __initdata = {
+ .gate_clks = peris_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(peris_gate_clks),
+ .nr_clk_ids = PERIS_NR_CLK,
+ .clk_regs = peris_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(peris_clk_regs),
+};
+
+static void __init exynos5433_cmu_peris_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &peris_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos5433_cmu_peris, "samsung,exynos5433-cmu-peris",
+ exynos5433_cmu_peris_init);
+
+/*
+ * Register offset definitions for CMU_FSYS
+ */
+#define MUX_SEL_FSYS0 0x0200
+#define MUX_SEL_FSYS1 0x0204
+#define MUX_SEL_FSYS2 0x0208
+#define MUX_SEL_FSYS3 0x020c
+#define MUX_SEL_FSYS4 0x0210
+#define MUX_ENABLE_FSYS0 0x0300
+#define MUX_ENABLE_FSYS1 0x0304
+#define MUX_ENABLE_FSYS2 0x0308
+#define MUX_ENABLE_FSYS3 0x030c
+#define MUX_ENABLE_FSYS4 0x0310
+#define MUX_STAT_FSYS0 0x0400
+#define MUX_STAT_FSYS1 0x0404
+#define MUX_STAT_FSYS2 0x0408
+#define MUX_STAT_FSYS3 0x040c
+#define MUX_STAT_FSYS4 0x0410
+#define MUX_IGNORE_FSYS2 0x0508
+#define MUX_IGNORE_FSYS3 0x050c
+#define ENABLE_ACLK_FSYS0 0x0800
+#define ENABLE_ACLK_FSYS1 0x0804
+#define ENABLE_PCLK_FSYS 0x0900
+#define ENABLE_SCLK_FSYS 0x0a00
+#define ENABLE_IP_FSYS0 0x0b00
+#define ENABLE_IP_FSYS1 0x0b04
+
+/* list of all parent clock list */
+PNAME(mout_aclk_fsys_200_user_p) = { "fin_pll", "div_aclk_fsys_200", };
+PNAME(mout_sclk_mmc2_user_p) = { "fin_pll", "sclk_mmc2_fsys", };
+PNAME(mout_sclk_mmc1_user_p) = { "fin_pll", "sclk_mmc1_fsys", };
+PNAME(mout_sclk_mmc0_user_p) = { "fin_pll", "sclk_mmc0_fsys", };
+
+static unsigned long fsys_clk_regs[] __initdata = {
+ MUX_SEL_FSYS0,
+ MUX_SEL_FSYS1,
+ MUX_SEL_FSYS2,
+ MUX_SEL_FSYS3,
+ MUX_SEL_FSYS4,
+ MUX_ENABLE_FSYS0,
+ MUX_ENABLE_FSYS1,
+ MUX_ENABLE_FSYS2,
+ MUX_ENABLE_FSYS3,
+ MUX_ENABLE_FSYS4,
+ MUX_STAT_FSYS0,
+ MUX_STAT_FSYS1,
+ MUX_STAT_FSYS2,
+ MUX_STAT_FSYS3,
+ MUX_STAT_FSYS4,
+ MUX_IGNORE_FSYS2,
+ MUX_IGNORE_FSYS3,
+ ENABLE_ACLK_FSYS0,
+ ENABLE_ACLK_FSYS1,
+ ENABLE_PCLK_FSYS,
+ ENABLE_SCLK_FSYS,
+ ENABLE_IP_FSYS0,
+ ENABLE_IP_FSYS1,
+};
+
+static struct samsung_mux_clock fsys_mux_clks[] __initdata = {
+ /* MUX_SEL_FSYS0 */
+ MUX(CLK_MOUT_ACLK_FSYS_200_USER, "mout_aclk_fsys_200_user",
+ mout_aclk_fsys_200_user_p, MUX_SEL_FSYS0, 0, 1),
+
+ /* MUX_SEL_FSYS1 */
+ MUX(CLK_MOUT_SCLK_MMC2_USER, "mout_sclk_mmc2_user",
+ mout_sclk_mmc2_user_p, MUX_SEL_FSYS1, 20, 1),
+ MUX(CLK_MOUT_SCLK_MMC1_USER, "mout_sclk_mmc1_user",
+ mout_sclk_mmc1_user_p, MUX_SEL_FSYS1, 16, 1),
+ MUX(CLK_MOUT_SCLK_MMC0_USER, "mout_sclk_mmc0_user",
+ mout_sclk_mmc0_user_p, MUX_SEL_FSYS1, 12, 1),
+};
+
+static struct samsung_gate_clock fsys_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_FSYS0 */
+ GATE(CLK_ACLK_PCIE, "aclk_pcie", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PDMA1, "aclk_pdma1", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 11, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_TSI, "aclk_tsi", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 10, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MMC2, "aclk_mmc2", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MMC1, "aclk_mmc1", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 7, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MMC0, "aclk_mmc0", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_UFS, "aclk_ufs", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_USBHOST20, "aclk_usbhost20", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_USBHOST30, "aclk_usbhost30", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_USBDRD30, "aclk_usbdrd30", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PDMA0, "aclk_pdma0", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS0, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_SCLK_FSYS */
+ GATE(CLK_SCLK_MMC2, "sclk_mmc2", "mout_sclk_mmc2_user",
+ ENABLE_SCLK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC1, "sclk_mmc1", "mout_sclk_mmc1_user",
+ ENABLE_SCLK_FSYS, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC0, "sclk_mmc0", "mout_sclk_mmc0_user",
+ ENABLE_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
+
+ /* ENABLE_IP_FSYS0 */
+ GATE(CLK_PDMA1, "pdma1", "aclk_pdma1", ENABLE_IP_FSYS0, 15, 0, 0),
+ GATE(CLK_PDMA0, "pdma0", "aclk_pdma0", ENABLE_IP_FSYS0, 0, 0, 0),
+};
+
+static struct samsung_cmu_info fsys_cmu_info __initdata = {
+ .mux_clks = fsys_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(fsys_mux_clks),
+ .gate_clks = fsys_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(fsys_gate_clks),
+ .nr_clk_ids = FSYS_NR_CLK,
+ .clk_regs = fsys_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(fsys_clk_regs),
+};
+
+static void __init exynos5433_cmu_fsys_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &fsys_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos5433_cmu_fsys, "samsung,exynos5433-cmu-fsys",
+ exynos5433_cmu_fsys_init);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
new file mode 100644
index 0000000..5cd0201
--- /dev/null
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -0,0 +1,199 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS5433_H
+#define _DT_BINDINGS_CLOCK_EXYNOS5433_H
+
+/* CMU_TOP */
+#define CLK_FOUT_ISP_PLL 1
+#define CLK_FOUT_AUD_PLL 2
+
+#define CLK_MOUT_AUD_PLL 10
+#define CLK_MOUT_ISP_PLL 11
+#define CLK_MOUT_AUD_PLL_USER_T 12
+#define CLK_MOUT_MPHY_PLL_USER 13
+#define CLK_MOUT_MFC_PLL_USER 14
+#define CLK_MOUT_BUS_PLL_USER 15
+#define CLK_MOUT_ACLK_HEVC_400 16
+#define CLK_MOUT_ACLK_CAM1_333 17
+#define CLK_MOUT_ACLK_CAM1_552_B 18
+#define CLK_MOUT_ACLK_CAM1_552_A 19
+#define CLK_MOUT_ACLK_ISP_DIS_400 20
+#define CLK_MOUT_ACLK_ISP_400 21
+#define CLK_MOUT_ACLK_BUS0_400 22
+#define CLK_MOUT_ACLK_MSCL_400_B 23
+#define CLK_MOUT_ACLK_MSCL_400_A 24
+#define CLK_MOUT_ACLK_GSCL_333 25
+#define CLK_MOUT_ACLK_G2D_400_B 26
+#define CLK_MOUT_ACLK_G2D_400_A 27
+#define CLK_MOUT_SCLK_JPEG_C 28
+#define CLK_MOUT_SCLK_JPEG_B 29
+#define CLK_MOUT_SCLK_JPEG_A 30
+#define CLK_MOUT_SCLK_MMC2_B 31
+#define CLK_MOUT_SCLK_MMC2_A 32
+#define CLK_MOUT_SCLK_MMC1_B 33
+#define CLK_MOUT_SCLK_MMC1_A 34
+#define CLK_MOUT_SCLK_MMC0_D 35
+#define CLK_MOUT_SCLK_MMC0_C 36
+#define CLK_MOUT_SCLK_MMC0_B 37
+#define CLK_MOUT_SCLK_MMC0_A 38
+#define CLK_MOUT_SCLK_SPI4 39
+#define CLK_MOUT_SCLK_SPI3 40
+#define CLK_MOUT_SCLK_UART2 41
+#define CLK_MOUT_SCLK_UART1 42
+#define CLK_MOUT_SCLK_UART0 43
+#define CLK_MOUT_SCLK_SPI2 44
+#define CLK_MOUT_SCLK_SPI1 45
+#define CLK_MOUT_SCLK_SPI0 46
+
+#define CLK_DIV_ACLK_FSYS_200 100
+#define CLK_DIV_ACLK_IMEM_SSSX_266 101
+#define CLK_DIV_ACLK_IMEM_200 102
+#define CLK_DIV_ACLK_IMEM_266 103
+#define CLK_DIV_ACLK_PERIC_66_B 104
+#define CLK_DIV_ACLK_PERIC_66_A 105
+#define CLK_DIV_ACLK_PERIS_66_B 106
+#define CLK_DIV_ACLK_PERIS_66_A 107
+#define CLK_DIV_SCLK_MMC1_B 108
+#define CLK_DIV_SCLK_MMC1_A 109
+#define CLK_DIV_SCLK_MMC0_B 110
+#define CLK_DIV_SCLK_MMC0_A 111
+#define CLK_DIV_SCLK_MMC2_B 112
+#define CLK_DIV_SCLK_MMC2_A 113
+#define CLK_DIV_SCLK_SPI1_B 114
+#define CLK_DIV_SCLK_SPI1_A 115
+#define CLK_DIV_SCLK_SPI0_B 116
+#define CLK_DIV_SCLK_SPI0_A 117
+#define CLK_DIV_SCLK_SPI2_B 118
+#define CLK_DIV_SCLK_SPI2_A 119
+#define CLK_DIV_SCLK_UART2 120
+#define CLK_DIV_SCLK_UART1 121
+#define CLK_DIV_SCLK_UART0 122
+#define CLK_DIV_SCLK_SPI4_B 123
+#define CLK_DIV_SCLK_SPI4_A 124
+#define CLK_DIV_SCLK_SPI3_B 125
+#define CLK_DIV_SCLK_SPI3_A 126
+
+#define CLK_ACLK_PERIC_66 200
+#define CLK_ACLK_PERIS_66 201
+#define CLK_ACLK_FSYS_200 202
+#define CLK_SCLK_MMC2_FSYS 203
+#define CLK_SCLK_MMC1_FSYS 204
+#define CLK_SCLK_MMC0_FSYS 205
+#define CLK_SCLK_SPI4_PERIC 206
+#define CLK_SCLK_SPI3_PERIC 207
+#define CLK_SCLK_UART2_PERIC 208
+#define CLK_SCLK_UART1_PERIC 209
+#define CLK_SCLK_UART0_PERIC 210
+#define CLK_SCLK_SPI2_PERIC 211
+#define CLK_SCLK_SPI1_PERIC 212
+#define CLK_SCLK_SPI0_PERIC 213
+
+#define TOP_NR_CLK 214
+
+/* CMU_CPIF */
+#define CLK_FOUT_MPHY_PLL 1
+
+#define CLK_MOUT_MPHY_PLL 2
+
+#define CLK_DIV_SCLK_MPHY 10
+
+#define CLK_SCLK_MPHY_PLL 11
+#define CLK_SCLK_UFS_MPHY 11
+
+#define CPIF_NR_CLK 12
+
+/* CMU_MIF */
+#define CLK_FOUT_MEM0_PLL 1
+#define CLK_FOUT_MEM1_PLL 2
+#define CLK_FOUT_BUS_PLL 3
+#define CLK_FOUT_MFC_PLL 4
+
+#define MIF_NR_CLK 5
+
+/* CMU_PERIC */
+#define CLK_PCLK_SPI2 1
+#define CLK_PCLK_SPI1 2
+#define CLK_PCLK_SPI0 3
+#define CLK_PCLK_UART2 4
+#define CLK_PCLK_UART1 5
+#define CLK_PCLK_UART0 6
+#define CLK_PCLK_HSI2C3 7
+#define CLK_PCLK_HSI2C2 8
+#define CLK_PCLK_HSI2C1 9
+#define CLK_PCLK_HSI2C0 10
+#define CLK_PCLK_I2C7 11
+#define CLK_PCLK_I2C6 12
+#define CLK_PCLK_I2C5 13
+#define CLK_PCLK_I2C4 14
+#define CLK_PCLK_I2C3 15
+#define CLK_PCLK_I2C2 16
+#define CLK_PCLK_I2C1 17
+#define CLK_PCLK_I2C0 18
+#define CLK_PCLK_SPI4 19
+#define CLK_PCLK_SPI3 20
+#define CLK_PCLK_HSI2C11 21
+#define CLK_PCLK_HSI2C10 22
+#define CLK_PCLK_HSI2C9 23
+#define CLK_PCLK_HSI2C8 24
+#define CLK_PCLK_HSI2C7 25
+#define CLK_PCLK_HSI2C6 26
+#define CLK_PCLK_HSI2C5 27
+#define CLK_PCLK_HSI2C4 28
+#define CLK_SCLK_SPI4 29
+#define CLK_SCLK_SPI3 30
+#define CLK_SCLK_SPI2 31
+#define CLK_SCLK_SPI1 32
+#define CLK_SCLK_SPI0 33
+#define CLK_SCLK_UART2 34
+#define CLK_SCLK_UART1 35
+#define CLK_SCLK_UART0 36
+
+#define PERIC_NR_CLK 37
+
+/* CMU_PERIS */
+#define CLK_PCLK_HPM_APBIF 1
+#define CLK_PCLK_TMU1_APBIF 2
+#define CLK_PCLK_TMU0_APBIF 3
+#define CLK_PCLK_PMU_PERIS 4
+#define CLK_PCLK_SYSREG_PERIS 5
+#define CLK_PCLK_CMU_TOP_APBIF 6
+#define CLK_PCLK_WDT_APOLLO 7
+#define CLK_PCLK_WDT_ATLAS 8
+#define CLK_PCLK_MCT 9
+#define CLK_PCLK_HDMI_CEC 10
+
+#define PERIS_NR_CLK 11
+
+/* CMU_FSYS */
+#define CLK_MOUT_ACLK_FSYS_200_USER 1
+#define CLK_MOUT_SCLK_MMC2_USER 2
+#define CLK_MOUT_SCLK_MMC1_USER 3
+#define CLK_MOUT_SCLK_MMC0_USER 4
+
+#define CLK_ACLK_PCIE 50
+#define CLK_ACLK_PDMA1 51
+#define CLK_ACLK_TSI 52
+#define CLK_ACLK_MMC2 53
+#define CLK_ACLK_MMC1 54
+#define CLK_ACLK_MMC0 55
+#define CLK_ACLK_UFS 56
+#define CLK_ACLK_USBHOST20 57
+#define CLK_ACLK_USBHOST30 58
+#define CLK_ACLK_USBDRD30 59
+#define CLK_ACLK_PDMA0 60
+#define CLK_SCLK_MMC2 61
+#define CLK_SCLK_MMC1 62
+#define CLK_SCLK_MMC0 63
+#define CLK_PDMA1 64
+#define CLK_PDMA0 65
+
+#define FSYS_NR_CLK 66
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-21 6:26 ` [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework Chanwoo Choi
@ 2015-01-22 16:47 ` Sylwester Nawrocki
2015-01-23 7:44 ` Chanwoo Choi
2015-01-24 16:11 ` Tomasz Figa
2015-01-23 17:40 ` Sylwester Nawrocki
1 sibling, 2 replies; 25+ messages in thread
From: Sylwester Nawrocki @ 2015-01-22 16:47 UTC (permalink / raw)
To: Chanwoo Choi
Cc: tomasz.figa, mturquette, kgene, pankaj.dubey, inki.dae,
chanho61.park, sw0312.kim, linux-samsung-soc, linux-kernel
Hi Chanwoo,
On 21/01/15 07:26, Chanwoo Choi wrote:
> This patch adds the support for CMU (Clock Management Units) of Exynos5433
> which is 64bit SoC and has Octa-cores. This patch supports necessary clocks
> (PLL/MMC/UART/MCT/I2C/SPI) for kernel boot and includes binding documentation
> for Exynos5433 clock controller.
> diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
> new file mode 100644
> index 0000000..72cd0ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
> @@ -0,0 +1,106 @@
> +* Samsung Exynos5433 CMU (Clock Management Units)
> +
> +The Exynos5433 clock controller generates and supplies clock to various
> +controllers within the Exynos5433 SoC.
> +
> +Required Properties:
> +
> +- compatible: should be one of the following.
> + - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP
> + which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
> + domains and bus clocks.
> + - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF
> + which generates clocks for LLI (Low Latency Interface) IP.
> + - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF
> + which generates clocks for DRAM Memory Controller domain.
> + - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
> + which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
> + - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
> + which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
> + - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
> + which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
> +
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +
> +- #clock-cells: should be 1.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume.
> +
> +All available clocks are defined as preprocessor macros in
> +dt-bindings/clock/exynos5433.h header and can be used in device
> +tree sources.
> +
> +Example 1: Examples of clock controller nodes are listed below.
> +
> + cmu_top: clock-controller@0x10030000 {
> + compatible = "samsung,exynos5433-cmu-top";
> + reg = <0x10030000 0x0c04>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_cpif: clock-controller@0x10fc0000 {
> + compatible = "samsung,exynos5433-cmu-cpif";
> + reg = <0x10fc0000 0x0c04>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_mif: clock-controller@0x105b0000 {
> + compatible = "samsung,exynos5433-cmu-mif";
> + reg = <0x105b0000 0x100c>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_peric: clock-controller@0x14c80000 {
> + compatible = "samsung,exynos5433-cmu-peric";
> + reg = <0x14c80000 0x0b08>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_peris: clock-controller@0x10040000 {
> + compatible = "samsung,exynos5433-cmu-peris";
> + reg = <0x10040000 0x0b20>;
> + #clock-cells = <1>;
> + };
> +
> + cmu_fsys: clock-controller@0x156e0000 {
> + compatible = "samsung,exynos5433-cmu-fsys";
> + reg = <0x156e0000 0x0b04>;
> + #clock-cells = <1>;
> + };
What are the reasons to split the whole clock controller into separate
device nodes with different compatible strings like this? I doubt drivers
associated with each of those compatible strings could be ever reused on
different Exynos SoCs.
There are hardware dependencies between these clock domains, which are
not currently modelled in DT with your binding. IOW, there is currently
no way to ensure proper registration order of the CMUs (clock domains).
This may be important in some cases.
To address this we could either add clocks/clock-names properties in
respective CMU device nodes, pointing to any clocks in other CMU(s) or
make a single device node for the whole clock controller, with an
aggregated reg entry, e.g.
cmu: clock-controller@0x10030000 {
compatible = "samsung,exynos5433-cmu";
reg = <0x10030000 0x0c04>,
<0x10fc0000 0x0c04>,
<0x105b0000 0x100c>,
<0x14c80000 0x0b08>,
<0x10040000 0x0b20>,
<0x156e0000 0x0b04>,
...
reg-names = "top", "cpif", "mif", "peric", "peris", "fsys"...
#clock-cells = <1>;
};
Then we could modify samsung_cmu_register_one() function by adding
the reg entry index or name argument. What do you think ?
--
Regards,
Sylwester
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-22 16:47 ` Sylwester Nawrocki
@ 2015-01-23 7:44 ` Chanwoo Choi
2015-01-23 17:40 ` Sylwester Nawrocki
2015-01-24 16:11 ` Tomasz Figa
1 sibling, 1 reply; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-23 7:44 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: tomasz.figa, mturquette, kgene, pankaj.dubey, inki.dae,
chanho61.park, sw0312.kim, linux-samsung-soc, linux-kernel
Hi Sylwester,
On 01/23/2015 01:47 AM, Sylwester Nawrocki wrote:
> Hi Chanwoo,
>
> On 21/01/15 07:26, Chanwoo Choi wrote:
>> This patch adds the support for CMU (Clock Management Units) of Exynos5433
>> which is 64bit SoC and has Octa-cores. This patch supports necessary clocks
>> (PLL/MMC/UART/MCT/I2C/SPI) for kernel boot and includes binding documentation
>> for Exynos5433 clock controller.
>
>> diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
>> new file mode 100644
>> index 0000000..72cd0ba
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
>> @@ -0,0 +1,106 @@
>> +* Samsung Exynos5433 CMU (Clock Management Units)
>> +
>> +The Exynos5433 clock controller generates and supplies clock to various
>> +controllers within the Exynos5433 SoC.
>> +
>> +Required Properties:
>> +
>> +- compatible: should be one of the following.
>> + - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP
>> + which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
>> + domains and bus clocks.
>> + - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF
>> + which generates clocks for LLI (Low Latency Interface) IP.
>> + - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF
>> + which generates clocks for DRAM Memory Controller domain.
>> + - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
>> + which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
>> + - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
>> + which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
>> + - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
>> + which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
>> +
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +
>> +- #clock-cells: should be 1.
>> +
>> +Each clock is assigned an identifier and client nodes can use this identifier
>> +to specify the clock which they consume.
>> +
>> +All available clocks are defined as preprocessor macros in
>> +dt-bindings/clock/exynos5433.h header and can be used in device
>> +tree sources.
>> +
>> +Example 1: Examples of clock controller nodes are listed below.
>> +
>> + cmu_top: clock-controller@0x10030000 {
>> + compatible = "samsung,exynos5433-cmu-top";
>> + reg = <0x10030000 0x0c04>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_cpif: clock-controller@0x10fc0000 {
>> + compatible = "samsung,exynos5433-cmu-cpif";
>> + reg = <0x10fc0000 0x0c04>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_mif: clock-controller@0x105b0000 {
>> + compatible = "samsung,exynos5433-cmu-mif";
>> + reg = <0x105b0000 0x100c>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_peric: clock-controller@0x14c80000 {
>> + compatible = "samsung,exynos5433-cmu-peric";
>> + reg = <0x14c80000 0x0b08>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_peris: clock-controller@0x10040000 {
>> + compatible = "samsung,exynos5433-cmu-peris";
>> + reg = <0x10040000 0x0b20>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_fsys: clock-controller@0x156e0000 {
>> + compatible = "samsung,exynos5433-cmu-fsys";
>> + reg = <0x156e0000 0x0b04>;
>> + #clock-cells = <1>;
>> + };
>
> What are the reasons to split the whole clock controller into separate
> device nodes with different compatible strings like this? I doubt drivers
> associated with each of those compatible strings could be ever reused on
> different Exynos SoCs.
No special reason. I added the clock controller according to clock domain
separately. As I knew, samsung clk drivers use this way to support various
clock domains. For exmaple, drivers/clk/samsung/clk-exynos7.c.
>
> There are hardware dependencies between these clock domains, which are
> not currently modelled in DT with your binding.
Right. current samsung clock drivers cannot show the hierarchy among clock domains in DT.
IOW, there is currently
> no way to ensure proper registration order of the CMUs (clock domains).
> This may be important in some cases.
>
> To address this we could either add clocks/clock-names properties in
> respective CMU device nodes, pointing to any clocks in other CMU(s) or
> make a single device node for the whole clock controller, with an
> aggregated reg entry, e.g.
>
> cmu: clock-controller@0x10030000 {
> compatible = "samsung,exynos5433-cmu";
> reg = <0x10030000 0x0c04>,
> <0x10fc0000 0x0c04>,
> <0x105b0000 0x100c>,
> <0x14c80000 0x0b08>,
> <0x10040000 0x0b20>,
> <0x156e0000 0x0b04>,
> ...
> reg-names = "top", "cpif", "mif", "peric", "peris", "fsys"...
> #clock-cells = <1>;
> };
If you make a single device node to support various clock domain,
How are you indicate the specific clock in some clock domain?
For example,
The serial dt node in exynos7.dtsi. serial_0 dt node use the uart clocks
in 'clock_peric0' clock domain and serial_1 dt node use the uart clocks
in 'clock-peric1' clock domain.
When using the clock in specific clock domain,
we need to phandle(e.g., clock_peric0, clock_peric1) of clock domain.
serial_0: serial@13630000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13630000 0x100>;
interrupts = <0 440 0>;
clocks = <&clock_peric0 PCLK_UART0>,
<&clock_peric0 SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
serial_1: serial@14c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c20000 0x100>;
interrupts = <0 456 0>;
clocks = <&clock_peric1 PCLK_UART1>,
<&clock_peric1 SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
>
> Then we could modify samsung_cmu_register_one() function by adding
> the reg entry index or name argument. What do you think ?
If there is more reasonable way to show the dependency between clock domains,
I will agree.
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-23 7:44 ` Chanwoo Choi
@ 2015-01-23 17:40 ` Sylwester Nawrocki
2015-01-23 22:05 ` Chanwoo Choi
0 siblings, 1 reply; 25+ messages in thread
From: Sylwester Nawrocki @ 2015-01-23 17:40 UTC (permalink / raw)
To: Chanwoo Choi
Cc: tomasz.figa, mturquette, kgene, pankaj.dubey, inki.dae,
chanho61.park, sw0312.kim, linux-samsung-soc, linux-kernel
On 23/01/15 08:44, Chanwoo Choi wrote:
>>> + cmu_top: clock-controller@0x10030000 {
>>> >> + compatible = "samsung,exynos5433-cmu-top";
>>> >> + reg = <0x10030000 0x0c04>;
>>> >> + #clock-cells = <1>;
>>> >> + };
>>> >> +
>>> >> + cmu_fsys: clock-controller@0x156e0000 {
>>> >> + compatible = "samsung,exynos5433-cmu-fsys";
>>> >> + reg = <0x156e0000 0x0b04>;
>>> >> + #clock-cells = <1>;
>>> >> + };
>> >
>> > What are the reasons to split the whole clock controller into separate
>> > device nodes with different compatible strings like this? I doubt drivers
>> > associated with each of those compatible strings could be ever reused on
>> > different Exynos SoCs.
>
> No special reason. I added the clock controller according to clock domain
> separately. As I knew, samsung clk drivers use this way to support various
> clock domains. For exmaple, drivers/clk/samsung/clk-exynos7.c.
I'm afraid exynos7 has that initialization ordering issue, unfortunately I
didn't notice it before.
>> > There are hardware dependencies between these clock domains, which are
>> > not currently modelled in DT with your binding.
>
> Right. current samsung clock drivers cannot show the hierarchy among clock
> domains in DT.
>
>> > IOW, there is currently
>> > no way to ensure proper registration order of the CMUs (clock domains).
>> > This may be important in some cases.
>> >
>> > To address this we could either add clocks/clock-names properties in
>> > respective CMU device nodes, pointing to any clocks in other CMU(s) or
>> > make a single device node for the whole clock controller, with an
>> > aggregated reg entry, e.g.
>> >
>> > cmu: clock-controller@0x10030000 {
>> > compatible = "samsung,exynos5433-cmu";
>> > reg = <0x10030000 0x0c04>,
>> > <0x10fc0000 0x0c04>,
>> > <0x105b0000 0x100c>,
>> > <0x14c80000 0x0b08>,
>> > <0x10040000 0x0b20>,
>> > <0x156e0000 0x0b04>,
>> > ...
>> > reg-names = "top", "cpif", "mif", "peric", "peris", "fsys"...
>> > #clock-cells = <1>;
>> > };
>
> If you make a single device node to support various clock domain,
> How are you indicate the specific clock in some clock domain?
This might be an issue, we would need to make all the clk indexes a one
contiguous set. I'm wondering if there is really any use of having such
information expressed explicitly in DT, or it would just make the DT
binding closer resembling the SoC's documentation ?
Similarly, the clock controller is divided into subdomains in older SoCs,
like exynos4, yet we do not create separate device nodes for each domain.
Is reference to each individual clock domain required in any other SoC's
part in case of exynos5433 ?
> For example,
> The serial dt node in exynos7.dtsi. serial_0 dt node use the uart clocks
> in 'clock_peric0' clock domain and serial_1 dt node use the uart clocks
> in 'clock-peric1' clock domain.
>
> When using the clock in specific clock domain,
> we need to phandle(e.g., clock_peric0, clock_peric1) of clock domain.
>
> serial_0: serial@13630000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x13630000 0x100>;
> interrupts = <0 440 0>;
> clocks = <&clock_peric0 PCLK_UART0>,
> <&clock_peric0 SCLK_UART0>;
> clock-names = "uart", "clk_uart_baud0";
> status = "disabled";
> };
>
> serial_1: serial@14c20000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c20000 0x100>;
> interrupts = <0 456 0>;
> clocks = <&clock_peric1 PCLK_UART1>,
> <&clock_peric1 SCLK_UART1>;
> clock-names = "uart", "clk_uart_baud0";
> status = "disabled";
> };
>
>> > Then we could modify samsung_cmu_register_one() function by adding
>> > the reg entry index or name argument. What do you think ?
>
> If there is more reasonable way to show the dependency between clock domains,
> I will agree.
The other option I mentioned is specifying all parent clocks of a given
clock domain in its device node with clocks(/clock-names) properties.
But it might be a bit hard to list all the clock domain dependencies
this way
--
Regards,
Sylwester
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-23 17:40 ` Sylwester Nawrocki
@ 2015-01-23 22:05 ` Chanwoo Choi
2015-01-28 23:38 ` Chanwoo Choi
0 siblings, 1 reply; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-23 22:05 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: Tomasz Figa, Mike Turquette, Kukjin Kim, pankaj.dubey@samsung.com,
inki.dae@samsung.com, chanho61.park@samsung.com, Seung-Woo Kim,
linux-samsung-soc, linux-kernel
Hi Sylwester,
On Sat, Jan 24, 2015 at 2:40 AM, Sylwester Nawrocki
<s.nawrocki@samsung.com> wrote:
> On 23/01/15 08:44, Chanwoo Choi wrote:
>>>> + cmu_top: clock-controller@0x10030000 {
>>>> >> + compatible = "samsung,exynos5433-cmu-top";
>>>> >> + reg = <0x10030000 0x0c04>;
>>>> >> + #clock-cells = <1>;
>>>> >> + };
>>>> >> +
>
>>>> >> + cmu_fsys: clock-controller@0x156e0000 {
>>>> >> + compatible = "samsung,exynos5433-cmu-fsys";
>>>> >> + reg = <0x156e0000 0x0b04>;
>>>> >> + #clock-cells = <1>;
>>>> >> + };
>>> >
>>> > What are the reasons to split the whole clock controller into separate
>>> > device nodes with different compatible strings like this? I doubt drivers
>>> > associated with each of those compatible strings could be ever reused on
>>> > different Exynos SoCs.
>>
>> No special reason. I added the clock controller according to clock domain
>> separately. As I knew, samsung clk drivers use this way to support various
>> clock domains. For exmaple, drivers/clk/samsung/clk-exynos7.c.
>
> I'm afraid exynos7 has that initialization ordering issue, unfortunately I
> didn't notice it before.
OK.
>
>>> > There are hardware dependencies between these clock domains, which are
>>> > not currently modelled in DT with your binding.
>>
>> Right. current samsung clock drivers cannot show the hierarchy among clock
>> domains in DT.
>>
>>> > IOW, there is currently
>>> > no way to ensure proper registration order of the CMUs (clock domains).
>>> > This may be important in some cases.
>>> >
>>> > To address this we could either add clocks/clock-names properties in
>>> > respective CMU device nodes, pointing to any clocks in other CMU(s) or
>>> > make a single device node for the whole clock controller, with an
>>> > aggregated reg entry, e.g.
>>> >
>>> > cmu: clock-controller@0x10030000 {
>>> > compatible = "samsung,exynos5433-cmu";
>>> > reg = <0x10030000 0x0c04>,
>>> > <0x10fc0000 0x0c04>,
>>> > <0x105b0000 0x100c>,
>>> > <0x14c80000 0x0b08>,
>>> > <0x10040000 0x0b20>,
>>> > <0x156e0000 0x0b04>,
>>> > ...
>>> > reg-names = "top", "cpif", "mif", "peric", "peris", "fsys"...
>>> > #clock-cells = <1>;
>>> > };
>>
>> If you make a single device node to support various clock domain,
>> How are you indicate the specific clock in some clock domain?
>
> This might be an issue, we would need to make all the clk indexes a one
> contiguous set.
Exynos5433 has a whole lot of clocks against Exynos4 series clocks.
So, if make all the clocks in the same set, I wonder making too huge set.
It may cause the complicated code to find the proper clock or to analyze
the clock driver.
I'm wondering if there is really any use of having such
> information expressed explicitly in DT, or it would just make the DT
> binding closer resembling the SoC's documentation ?
If we show the hierarchy or dependency between clock domains,
I think we should modify "structure samsung_clk_provider"
to include dependency information between clock domains.
(It is just my opinion, this opinion could be not proper solution.)
Because
when we use the common clk framework without adding
any dependency information between clock domains, it is well working.
>
> Similarly, the clock controller is divided into subdomains in older SoCs,
> like exynos4, yet we do not create separate device nodes for each domain.
> Is reference to each individual clock domain required in any other SoC's
> part in case of exynos5433 ?
There is a difference between exynos4 cmu and exynos5433 cmu.
exynos4. As I knew, Exynos4 series have the one more clock domain.
But, there are not any IPs between clock domains. We can check it as following
read base address and scope.
The base address and range of Exynos4412 clock domain :
- 0x1003_0000 ~ 0x1003_CA08
- 0x1004_0000 ~ 0x1004_8B0C
But, the clock domain in base address map of exynos5433 is located
in non-continuous range. Also, there are un-related IPs to clocks.
(e.g., mct 101c_0000, gic 1100_1000, serial0 14c1_0000, pinctrl 1058_0000 ...)
If we make the one dt node for clock domains like exynos4,
I think it may cause the possible issue that clock drivers may access
the un-related memory-mapped region.
The base address and range of Exynos5433 clock domain :
- top domain : 0x1003_0000 ~ 0x1003_0c04
- cpif domain : 0x10fc_0000 ~ 0x10fc_0x0c04
- mif domain : 0x105b_0000 ~ 0x105b_0x100c
- peric domain : 0x14c8_0000 ~ 0x14c8_0b08
- peris domain : 0x1004_0000 ~ 0x1004_0x0b20
- fsys domain : 0x156e_0000 ~ 0x156e_0b04
>
>> For example,
>> The serial dt node in exynos7.dtsi. serial_0 dt node use the uart clocks
>> in 'clock_peric0' clock domain and serial_1 dt node use the uart clocks
>> in 'clock-peric1' clock domain.
>>
>> When using the clock in specific clock domain,
>> we need to phandle(e.g., clock_peric0, clock_peric1) of clock domain.
>>
>> serial_0: serial@13630000 {
>> compatible = "samsung,exynos4210-uart";
>> reg = <0x13630000 0x100>;
>> interrupts = <0 440 0>;
>> clocks = <&clock_peric0 PCLK_UART0>,
>> <&clock_peric0 SCLK_UART0>;
>> clock-names = "uart", "clk_uart_baud0";
>> status = "disabled";
>> };
>>
>> serial_1: serial@14c20000 {
>> compatible = "samsung,exynos4210-uart";
>> reg = <0x14c20000 0x100>;
>> interrupts = <0 456 0>;
>> clocks = <&clock_peric1 PCLK_UART1>,
>> <&clock_peric1 SCLK_UART1>;
>> clock-names = "uart", "clk_uart_baud0";
>> status = "disabled";
>> };
>>
>>> > Then we could modify samsung_cmu_register_one() function by adding
>>> > the reg entry index or name argument. What do you think ?
>>
>> If there is more reasonable way to show the dependency between clock domains,
>> I will agree.
>
> The other option I mentioned is specifying all parent clocks of a given
> clock domain in its device node with clocks(/clock-names) properties.
> But it might be a bit hard to list all the clock domain dependencies
> this way
Right, I agree that it is too hard.
Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-23 22:05 ` Chanwoo Choi
@ 2015-01-28 23:38 ` Chanwoo Choi
2015-01-29 12:18 ` Sylwester Nawrocki
0 siblings, 1 reply; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-28 23:38 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: cw00.choi, Chanwoo Choi, Tomasz Figa, Mike Turquette, Kukjin Kim,
pankaj.dubey@samsung.com, inki.dae@samsung.com,
chanho61.park@samsung.com, Seung-Woo Kim, linux-samsung-soc,
linux-kernel
Hi Sylwester,
Do you have any comment about Tomasz and me reply?
Thanks,
Chanwoo Choi
On 01/24/2015 07:05 AM, Chanwoo Choi wrote:
> Hi Sylwester,
>
> On Sat, Jan 24, 2015 at 2:40 AM, Sylwester Nawrocki
> <s.nawrocki@samsung.com> wrote:
>> On 23/01/15 08:44, Chanwoo Choi wrote:
>>>>> + cmu_top: clock-controller@0x10030000 {
>>>>>>> + compatible = "samsung,exynos5433-cmu-top";
>>>>>>> + reg = <0x10030000 0x0c04>;
>>>>>>> + #clock-cells = <1>;
>>>>>>> + };
>>>>>>> +
>>
>>>>>>> + cmu_fsys: clock-controller@0x156e0000 {
>>>>>>> + compatible = "samsung,exynos5433-cmu-fsys";
>>>>>>> + reg = <0x156e0000 0x0b04>;
>>>>>>> + #clock-cells = <1>;
>>>>>>> + };
>>>>>
>>>>> What are the reasons to split the whole clock controller into separate
>>>>> device nodes with different compatible strings like this? I doubt drivers
>>>>> associated with each of those compatible strings could be ever reused on
>>>>> different Exynos SoCs.
>>>
>>> No special reason. I added the clock controller according to clock domain
>>> separately. As I knew, samsung clk drivers use this way to support various
>>> clock domains. For exmaple, drivers/clk/samsung/clk-exynos7.c.
>>
>> I'm afraid exynos7 has that initialization ordering issue, unfortunately I
>> didn't notice it before.
>
> OK.
>
>>
>>>>> There are hardware dependencies between these clock domains, which are
>>>>> not currently modelled in DT with your binding.
>>>
>>> Right. current samsung clock drivers cannot show the hierarchy among clock
>>> domains in DT.
>>>
>>>>> IOW, there is currently
>>>>> no way to ensure proper registration order of the CMUs (clock domains).
>>>>> This may be important in some cases.
>>>>>
>>>>> To address this we could either add clocks/clock-names properties in
>>>>> respective CMU device nodes, pointing to any clocks in other CMU(s) or
>>>>> make a single device node for the whole clock controller, with an
>>>>> aggregated reg entry, e.g.
>>>>>
>>>>> cmu: clock-controller@0x10030000 {
>>>>> compatible = "samsung,exynos5433-cmu";
>>>>> reg = <0x10030000 0x0c04>,
>>>>> <0x10fc0000 0x0c04>,
>>>>> <0x105b0000 0x100c>,
>>>>> <0x14c80000 0x0b08>,
>>>>> <0x10040000 0x0b20>,
>>>>> <0x156e0000 0x0b04>,
>>>>> ...
>>>>> reg-names = "top", "cpif", "mif", "peric", "peris", "fsys"...
>>>>> #clock-cells = <1>;
>>>>> };
>>>
>>> If you make a single device node to support various clock domain,
>>> How are you indicate the specific clock in some clock domain?
>>
>> This might be an issue, we would need to make all the clk indexes a one
>> contiguous set.
>
> Exynos5433 has a whole lot of clocks against Exynos4 series clocks.
> So, if make all the clocks in the same set, I wonder making too huge set.
> It may cause the complicated code to find the proper clock or to analyze
> the clock driver.
>
> I'm wondering if there is really any use of having such
>> information expressed explicitly in DT, or it would just make the DT
>> binding closer resembling the SoC's documentation ?
>
> If we show the hierarchy or dependency between clock domains,
> I think we should modify "structure samsung_clk_provider"
> to include dependency information between clock domains.
> (It is just my opinion, this opinion could be not proper solution.)
>
> Because
> when we use the common clk framework without adding
> any dependency information between clock domains, it is well working.
>
>>
>> Similarly, the clock controller is divided into subdomains in older SoCs,
>> like exynos4, yet we do not create separate device nodes for each domain.
>> Is reference to each individual clock domain required in any other SoC's
>> part in case of exynos5433 ?
>
> There is a difference between exynos4 cmu and exynos5433 cmu.
> exynos4. As I knew, Exynos4 series have the one more clock domain.
> But, there are not any IPs between clock domains. We can check it as following
> read base address and scope.
>
> The base address and range of Exynos4412 clock domain :
> - 0x1003_0000 ~ 0x1003_CA08
> - 0x1004_0000 ~ 0x1004_8B0C
>
> But, the clock domain in base address map of exynos5433 is located
> in non-continuous range. Also, there are un-related IPs to clocks.
> (e.g., mct 101c_0000, gic 1100_1000, serial0 14c1_0000, pinctrl 1058_0000 ...)
> If we make the one dt node for clock domains like exynos4,
> I think it may cause the possible issue that clock drivers may access
> the un-related memory-mapped region.
>
> The base address and range of Exynos5433 clock domain :
> - top domain : 0x1003_0000 ~ 0x1003_0c04
> - cpif domain : 0x10fc_0000 ~ 0x10fc_0x0c04
> - mif domain : 0x105b_0000 ~ 0x105b_0x100c
> - peric domain : 0x14c8_0000 ~ 0x14c8_0b08
> - peris domain : 0x1004_0000 ~ 0x1004_0x0b20
> - fsys domain : 0x156e_0000 ~ 0x156e_0b04
>
>>
>>> For example,
>>> The serial dt node in exynos7.dtsi. serial_0 dt node use the uart clocks
>>> in 'clock_peric0' clock domain and serial_1 dt node use the uart clocks
>>> in 'clock-peric1' clock domain.
>>>
>>> When using the clock in specific clock domain,
>>> we need to phandle(e.g., clock_peric0, clock_peric1) of clock domain.
>>>
>>> serial_0: serial@13630000 {
>>> compatible = "samsung,exynos4210-uart";
>>> reg = <0x13630000 0x100>;
>>> interrupts = <0 440 0>;
>>> clocks = <&clock_peric0 PCLK_UART0>,
>>> <&clock_peric0 SCLK_UART0>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> status = "disabled";
>>> };
>>>
>>> serial_1: serial@14c20000 {
>>> compatible = "samsung,exynos4210-uart";
>>> reg = <0x14c20000 0x100>;
>>> interrupts = <0 456 0>;
>>> clocks = <&clock_peric1 PCLK_UART1>,
>>> <&clock_peric1 SCLK_UART1>;
>>> clock-names = "uart", "clk_uart_baud0";
>>> status = "disabled";
>>> };
>>>
>>>>> Then we could modify samsung_cmu_register_one() function by adding
>>>>> the reg entry index or name argument. What do you think ?
>>>
>>> If there is more reasonable way to show the dependency between clock domains,
>>> I will agree.
>>
>> The other option I mentioned is specifying all parent clocks of a given
>> clock domain in its device node with clocks(/clock-names) properties.
>> But it might be a bit hard to list all the clock domain dependencies
>> this way
>
> Right, I agree that it is too hard.
>
> Regards,
> Chanwoo Choi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-28 23:38 ` Chanwoo Choi
@ 2015-01-29 12:18 ` Sylwester Nawrocki
0 siblings, 0 replies; 25+ messages in thread
From: Sylwester Nawrocki @ 2015-01-29 12:18 UTC (permalink / raw)
To: Chanwoo Choi
Cc: Chanwoo Choi, Tomasz Figa, Mike Turquette, Kukjin Kim,
pankaj.dubey@samsung.com, inki.dae@samsung.com,
chanho61.park@samsung.com, Seung-Woo Kim, linux-samsung-soc,
linux-kernel
Hi Chanwoo,
On 29/01/15 00:38, Chanwoo Choi wrote:
...
>>>>
>>>> Right. current samsung clock drivers cannot show the hierarchy among clock
>>>> domains in DT.
>>>>
>>>>>> IOW, there is currently
>>>>>> no way to ensure proper registration order of the CMUs (clock domains).
>>>>>> This may be important in some cases.
>>>>>>
>>>>>> To address this we could either add clocks/clock-names properties in
>>>>>> respective CMU device nodes, pointing to any clocks in other CMU(s) or
>>>>>> make a single device node for the whole clock controller, with an
>>>>>> aggregated reg entry, e.g.
>>>>>>
>>>>>> cmu: clock-controller@0x10030000 {
>>>>>> compatible = "samsung,exynos5433-cmu";
>>>>>> reg = <0x10030000 0x0c04>,
>>>>>> <0x10fc0000 0x0c04>,
>>>>>> <0x105b0000 0x100c>,
>>>>>> <0x14c80000 0x0b08>,
>>>>>> <0x10040000 0x0b20>,
>>>>>> <0x156e0000 0x0b04>,
>>>>>> ...
>>>>>> reg-names = "top", "cpif", "mif", "peric", "peris", "fsys"...
>>>>>> #clock-cells = <1>;
>>>>>> };
>>>>
>>>> If you make a single device node to support various clock domain,
>>>> How are you indicate the specific clock in some clock domain?
>>>
>>> This might be an issue, we would need to make all the clk indexes a one
>>> contiguous set.
>>
>> Exynos5433 has a whole lot of clocks against Exynos4 series clocks.
>> So, if make all the clocks in the same set, I wonder making too huge set.
>> It may cause the complicated code to find the proper clock or to analyze
>> the clock driver.
>>
>> I'm wondering if there is really any use of having such
>>> information expressed explicitly in DT, or it would just make the DT
>>> binding closer resembling the SoC's documentation ?
>>
>> If we show the hierarchy or dependency between clock domains,
>> I think we should modify "structure samsung_clk_provider"
>> to include dependency information between clock domains.
>> (It is just my opinion, this opinion could be not proper solution.)
As your patches stand currently there is no need to do anything else
in the driver, since the clock dependencies are specified by static
clock names in each clk domain provider.
We could just leave the multiple nodes, one per each clk domain and if
we specified parent clocks to each clk domain the clk providers would
be registered in proper order, since clk core would take care of it.
>> Because when we use the common clk framework without adding
>> any dependency information between clock domains, it is well working.
Yes it works currently, but if you try to get/set rate of a clock supplied
by a clk domain A right after this domain is registered, and domain B which
provides clocks to domain A is not yet registered the clk rate will be
incorrect.
We are currently not seeing any issues only because our use cases are
limited.
>>> Similarly, the clock controller is divided into subdomains in older SoCs,
>>> like exynos4, yet we do not create separate device nodes for each domain.
>>> Is reference to each individual clock domain required in any other SoC's
>>> part in case of exynos5433 ?
>>
>> There is a difference between exynos4 cmu and exynos5433 cmu.
>> exynos4. As I knew, Exynos4 series have the one more clock domain.
>> But, there are not any IPs between clock domains. We can check it as following
>> read base address and scope.
>>
>> The base address and range of Exynos4412 clock domain :
>> - 0x1003_0000 ~ 0x1003_CA08
>> - 0x1004_0000 ~ 0x1004_8B0C
>>
>> But, the clock domain in base address map of exynos5433 is located
>> in non-continuous range. Also, there are un-related IPs to clocks.
>> (e.g., mct 101c_0000, gic 1100_1000, serial0 14c1_0000, pinctrl 1058_0000 ...)
>> If we make the one dt node for clock domains like exynos4,
>> I think it may cause the possible issue that clock drivers may access
>> the un-related memory-mapped region.
>>
>> The base address and range of Exynos5433 clock domain :
>> - top domain : 0x1003_0000 ~ 0x1003_0c04
>> - cpif domain : 0x10fc_0000 ~ 0x10fc_0x0c04
>> - mif domain : 0x105b_0000 ~ 0x105b_0x100c
>> - peric domain : 0x14c8_0000 ~ 0x14c8_0b08
>> - peris domain : 0x1004_0000 ~ 0x1004_0x0b20
>> - fsys domain : 0x156e_0000 ~ 0x156e_0b04
For reason Tomasz mentioned it may be indeed better to model each clk
domain as separate node. In order to, for example make it easier to
handle dependencies between clk domain and power domain.
The register region specified by reg property of course doesn't have to be
contiguous, each offset/size tuple from reg will be just mapped separately
in the driver. So there can be gaps (including regions of other IP blocks)
between the clock controller blocks registers memory regions.
>>>> For example,
>>>> The serial dt node in exynos7.dtsi. serial_0 dt node use the uart clocks
>>>> in 'clock_peric0' clock domain and serial_1 dt node use the uart clocks
>>>> in 'clock-peric1' clock domain.
>>>>
>>>> When using the clock in specific clock domain,
>>>> we need to phandle(e.g., clock_peric0, clock_peric1) of clock domain.
>>>>
>>>> serial_0: serial@13630000 {
>>>> compatible = "samsung,exynos4210-uart";
>>>> reg = <0x13630000 0x100>;
>>>> interrupts = <0 440 0>;
>>>> clocks = <&clock_peric0 PCLK_UART0>,
>>>> <&clock_peric0 SCLK_UART0>;
>>>> clock-names = "uart", "clk_uart_baud0";
>>>> status = "disabled";
>>>> };
>>>>
>>>> serial_1: serial@14c20000 {
>>>> compatible = "samsung,exynos4210-uart";
>>>> reg = <0x14c20000 0x100>;
>>>> interrupts = <0 456 0>;
>>>> clocks = <&clock_peric1 PCLK_UART1>,
>>>> <&clock_peric1 SCLK_UART1>;
>>>> clock-names = "uart", "clk_uart_baud0";
>>>> status = "disabled";
>>>> };
>>>>
>>>>>> Then we could modify samsung_cmu_register_one() function by adding
>>>>>> the reg entry index or name argument. What do you think ?
>>>>
>>>> If there is more reasonable way to show the dependency between clock domains,
>>>> I will agree.
>>>
>>> The other option I mentioned is specifying all parent clocks of a given
>>> clock domain in its device node with clocks(/clock-names) properties.
>>> But it might be a bit hard to list all the clock domain dependencies
>>> this way
>>
>> Right, I agree that it is too hard.
I took a look at it again and it actually looks fairly easy to do.
In most cases we have just a few input clocks to each block, often
it's as little as 2 clocks. For instance, our CMU_TOP binding would
need to be updated to include following clk supplies:
clock-controller@10030000 {
compatible = "samsung,exynos5433-cmu-top";
reg = <0x10030000 0x0c04>;
clocks = <&oscclk>,
<&blk_mif CLK_FOUT_BUS_PLL>,
<&blk_mif CLK_FOUT_MFC_PLL>,
<&blk_cpif CLK_FOUT_MPHY_PLL>;
clock-names = "oscclk",
"bus_pll",
"mfc_pll",
"mphy_pll";
};
Note the ISP_PLL and AUD_PLL already belong to CMU_TOP.
And here are related nodes:
blk_mif: clock-controller@105b0000 {
compatible = "samsung,exynos5433-cmu-mif";
reg = <0x105b0000 0x100c>;
clocks = ...
clock-names = ...
};
blk_cpif: clock-controller@10fc0000 {
compatible = "samsung,exynos5433-cmu-cpif";
reg = <0x10fc0000 0x0c04>;
clocks = ...
clock-names = ...
};
oscclk: fixed-clock {
compatible = "fixed-clock";
clock-output-names = "oscclk";
};
You don't need to change anything in the driver for now, please just add
such dependencies to the binding. I hope there is no circular dependencies,
there generally shouldn't be if the blocks are modelled properly.
--
Thanks,
Sylwester
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-22 16:47 ` Sylwester Nawrocki
2015-01-23 7:44 ` Chanwoo Choi
@ 2015-01-24 16:11 ` Tomasz Figa
1 sibling, 0 replies; 25+ messages in thread
From: Tomasz Figa @ 2015-01-24 16:11 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: Chanwoo Choi, Michael Turquette, Kukjin Kim, Pankaj Dubey,
InKi Dae, Chanho Park, sw0312.kim,
linux-samsung-soc@vger.kernel.org, linux-kernel
2015-01-23 1:47 GMT+09:00 Sylwester Nawrocki <s.nawrocki@samsung.com>:
> Hi Chanwoo,
>
> On 21/01/15 07:26, Chanwoo Choi wrote:
>> This patch adds the support for CMU (Clock Management Units) of Exynos5433
>> which is 64bit SoC and has Octa-cores. This patch supports necessary clocks
>> (PLL/MMC/UART/MCT/I2C/SPI) for kernel boot and includes binding documentation
>> for Exynos5433 clock controller.
>
>> diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
>> new file mode 100644
>> index 0000000..72cd0ba
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
>> @@ -0,0 +1,106 @@
>> +* Samsung Exynos5433 CMU (Clock Management Units)
>> +
>> +The Exynos5433 clock controller generates and supplies clock to various
>> +controllers within the Exynos5433 SoC.
>> +
>> +Required Properties:
>> +
>> +- compatible: should be one of the following.
>> + - "samsung,exynos5433-cmu-top" - clock controller compatible for CMU_TOP
>> + which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
>> + domains and bus clocks.
>> + - "samsung,exynos5433-cmu-cpif" - clock controller compatible for CMU_CPIF
>> + which generates clocks for LLI (Low Latency Interface) IP.
>> + - "samsung,exynos5433-cmu-mif" - clock controller compatible for CMU_MIF
>> + which generates clocks for DRAM Memory Controller domain.
>> + - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
>> + which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
>> + - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
>> + which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
>> + - "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
>> + which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
>> +
>> +- reg: physical base address of the controller and length of memory mapped
>> + region.
>> +
>> +- #clock-cells: should be 1.
>> +
>> +Each clock is assigned an identifier and client nodes can use this identifier
>> +to specify the clock which they consume.
>> +
>> +All available clocks are defined as preprocessor macros in
>> +dt-bindings/clock/exynos5433.h header and can be used in device
>> +tree sources.
>> +
>> +Example 1: Examples of clock controller nodes are listed below.
>> +
>> + cmu_top: clock-controller@0x10030000 {
>> + compatible = "samsung,exynos5433-cmu-top";
>> + reg = <0x10030000 0x0c04>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_cpif: clock-controller@0x10fc0000 {
>> + compatible = "samsung,exynos5433-cmu-cpif";
>> + reg = <0x10fc0000 0x0c04>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_mif: clock-controller@0x105b0000 {
>> + compatible = "samsung,exynos5433-cmu-mif";
>> + reg = <0x105b0000 0x100c>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_peric: clock-controller@0x14c80000 {
>> + compatible = "samsung,exynos5433-cmu-peric";
>> + reg = <0x14c80000 0x0b08>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_peris: clock-controller@0x10040000 {
>> + compatible = "samsung,exynos5433-cmu-peris";
>> + reg = <0x10040000 0x0b20>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + cmu_fsys: clock-controller@0x156e0000 {
>> + compatible = "samsung,exynos5433-cmu-fsys";
>> + reg = <0x156e0000 0x0b04>;
>> + #clock-cells = <1>;
>> + };
>
> What are the reasons to split the whole clock controller into separate
> device nodes with different compatible strings like this? I doubt drivers
> associated with each of those compatible strings could be ever reused on
> different Exynos SoCs.
Well, they are separate IP blocks, so this is how they should be
represented in DT and IMHO using different compatible strings is a bit
cleaner than relying on aliases to get instance index.
Plus we probably want to learn from mistakes done when designing
Exynos4x12 clock bindings, which prevent us from fixing the issue of
ISP power domain, in which the ISP CMU is located. AFAICS, Exynos5433
clock tree is split between several such "ISP CMUs".
>
> There are hardware dependencies between these clock domains, which are
> not currently modelled in DT with your binding. IOW, there is currently
> no way to ensure proper registration order of the CMUs (clock domains).
> This may be important in some cases.
>
> To address this we could either add clocks/clock-names properties in
> respective CMU device nodes, pointing to any clocks in other CMU(s)
which I believe is the proper way of doing things, which lets us
preserve the correct representation of separate CMUs in DT.
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-21 6:26 ` [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework Chanwoo Choi
2015-01-22 16:47 ` Sylwester Nawrocki
@ 2015-01-23 17:40 ` Sylwester Nawrocki
2015-01-23 20:54 ` Chanwoo Choi
1 sibling, 1 reply; 25+ messages in thread
From: Sylwester Nawrocki @ 2015-01-23 17:40 UTC (permalink / raw)
To: Chanwoo Choi
Cc: tomasz.figa, mturquette, kgene, pankaj.dubey, inki.dae,
chanho61.park, sw0312.kim, linux-samsung-soc, linux-kernel
On 21/01/15 07:26, Chanwoo Choi wrote:
> +/* list of all parent clock list */
> +PNAME(mout_bus_pll_user_p) = { "fin_pll", "sclk_bus_pll", };
...
> +
> +static struct samsung_mux_clock top_mux_clks[] __initdata = {
> + MUX(CLK_MOUT_BUS_PLL_USER, "mout_bus_pll_user", mout_bus_pll_user_p,
> + MUX_SEL_TOP1, 0, 1),
...
> +};
> +
> +static struct samsung_div_clock top_div_clks[] __initdata = {
...
> + /* DIV_TOP3 */
> + DIV(CLK_DIV_ACLK_IMEM_SSSX_266, "div_aclk_imem_sssx_266",
> + "mout_bus_pll_user", DIV_TOP3, 24, 3),
Shouldn't "fin_pll" be renamed to "oscclk" ? In the documentation
the root clock (from XXTI input pin) seems to be referred as OSCCLK.
And I can't see "fin_pll" clock registered anywhere. Shouldn't there
be a "fixed-rate-clock" as a parent of at least CMU_TOP? e.g.
xxti: xxti {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "oscclk";
clock-frequency = <24000000>;
};
&cmu_top {
clocks = <&xxti>;
};
--
Regards,
Sylwester
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-23 17:40 ` Sylwester Nawrocki
@ 2015-01-23 20:54 ` Chanwoo Choi
2015-01-29 12:53 ` Sylwester Nawrocki
0 siblings, 1 reply; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-23 20:54 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: Tomasz Figa, Mike Turquette, Kukjin Kim, pankaj.dubey@samsung.com,
inki.dae@samsung.com, chanho61.park@samsung.com, Seung-Woo Kim,
linux-samsung-soc, linux-kernel
Hi Sylwester,
On Sat, Jan 24, 2015 at 2:40 AM, Sylwester Nawrocki
<s.nawrocki@samsung.com> wrote:
> On 21/01/15 07:26, Chanwoo Choi wrote:
>> +/* list of all parent clock list */
>
>> +PNAME(mout_bus_pll_user_p) = { "fin_pll", "sclk_bus_pll", };
> ...
>> +
>> +static struct samsung_mux_clock top_mux_clks[] __initdata = {
>
>> + MUX(CLK_MOUT_BUS_PLL_USER, "mout_bus_pll_user", mout_bus_pll_user_p,
>> + MUX_SEL_TOP1, 0, 1),
> ...
>> +};
>> +
>> +static struct samsung_div_clock top_div_clks[] __initdata = {
> ...
>> + /* DIV_TOP3 */
>> + DIV(CLK_DIV_ACLK_IMEM_SSSX_266, "div_aclk_imem_sssx_266",
>> + "mout_bus_pll_user", DIV_TOP3, 24, 3),
>
> Shouldn't "fin_pll" be renamed to "oscclk" ? In the documentation
> the root clock (from XXTI input pin) seems to be referred as OSCCLK.
> And I can't see "fin_pll" clock registered anywhere. Shouldn't there
> be a "fixed-rate-clock" as a parent of at least CMU_TOP? e.g.
Right,
I added "fin_pll" fixed clock in DT as following:
When I registered "fin_pll" fixed clock, I could use "fin_pll" clock
for exynos5433 cmu without adding additional dt node.
fin_pll: xxti {
compatible = "fixed-clock";
clock-output-names = "fin_pll";
#clock-cells = <0>;
};
I'll add the example of "fin_pll" dt node to documentation for exynos5433 cmu.
>
> xxti: xxti {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-output-names = "oscclk";
> clock-frequency = <24000000>;
> };
>
> &cmu_top {
> clocks = <&xxti>;
> };
>
Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-23 20:54 ` Chanwoo Choi
@ 2015-01-29 12:53 ` Sylwester Nawrocki
2015-01-30 0:50 ` Chanwoo Choi
0 siblings, 1 reply; 25+ messages in thread
From: Sylwester Nawrocki @ 2015-01-29 12:53 UTC (permalink / raw)
To: cw00.choi
Cc: Tomasz Figa, Mike Turquette, Kukjin Kim, pankaj.dubey@samsung.com,
inki.dae@samsung.com, chanho61.park@samsung.com, Seung-Woo Kim,
linux-samsung-soc, linux-kernel
Hi Chanwoo,
On 23/01/15 21:54, Chanwoo Choi wrote:
> On Sat, Jan 24, 2015 at 2:40 AM, Sylwester Nawrocki
> <s.nawrocki@samsung.com> wrote:
>> On 21/01/15 07:26, Chanwoo Choi wrote:
>>> +/* list of all parent clock list */
>>
>>> +PNAME(mout_bus_pll_user_p) = { "fin_pll", "sclk_bus_pll", };
>> ...
>>> +
>>> +static struct samsung_mux_clock top_mux_clks[] __initdata = {
>>
>>> + MUX(CLK_MOUT_BUS_PLL_USER, "mout_bus_pll_user", mout_bus_pll_user_p,
>>> + MUX_SEL_TOP1, 0, 1),
>> ...
>>> +};
>>> +
>>> +static struct samsung_div_clock top_div_clks[] __initdata = {
>> ...
>>> + /* DIV_TOP3 */
>>> + DIV(CLK_DIV_ACLK_IMEM_SSSX_266, "div_aclk_imem_sssx_266",
>>> + "mout_bus_pll_user", DIV_TOP3, 24, 3),
>>
>> Shouldn't "fin_pll" be renamed to "oscclk" ? In the documentation
>> the root clock (from XXTI input pin) seems to be referred as OSCCLK.
>> And I can't see "fin_pll" clock registered anywhere. Shouldn't there
>> be a "fixed-rate-clock" as a parent of at least CMU_TOP? e.g.
>
> Right,
> I added "fin_pll" fixed clock in DT as following:
> When I registered "fin_pll" fixed clock, I could use "fin_pll" clock
> for exynos5433 cmu without adding additional dt node.
>
> fin_pll: xxti {
> compatible = "fixed-clock";
> clock-output-names = "fin_pll";
> #clock-cells = <0>;
> };
>
> I'll add the example of "fin_pll" dt node to documentation for exynos5433 cmu.
OK, thanks. But I think it needs to be named "oscclk", FIN_PLL is almost
not existent in the SoC's documentation.
I'd suggest to define the root oscillator clock (XXTI/OSCCLK) as "oscclk"
in DT, rather than registering "fin_pll" fixed clock in the driver.
>> xxti: xxti {
>> compatible = "fixed-clock";
>> #clock-cells = <0>;
>> clock-output-names = "oscclk";
>> clock-frequency = <24000000>;
>> };
>>
>> &cmu_top {
>> clocks = <&xxti>;
>> };
--
Regards,
Sylwester
^ permalink raw reply [flat|nested] 25+ messages in thread* Re: [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework
2015-01-29 12:53 ` Sylwester Nawrocki
@ 2015-01-30 0:50 ` Chanwoo Choi
0 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-30 0:50 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: Tomasz Figa, Mike Turquette, Kukjin Kim, pankaj.dubey@samsung.com,
inki.dae@samsung.com, chanho61.park@samsung.com, Seung-Woo Kim,
linux-samsung-soc, linux-kernel
Hi Sylwester,
On 01/29/2015 09:53 PM, Sylwester Nawrocki wrote:
> Hi Chanwoo,
>
> On 23/01/15 21:54, Chanwoo Choi wrote:
>> On Sat, Jan 24, 2015 at 2:40 AM, Sylwester Nawrocki
>> <s.nawrocki@samsung.com> wrote:
>>> On 21/01/15 07:26, Chanwoo Choi wrote:
>>>> +/* list of all parent clock list */
>>>
>>>> +PNAME(mout_bus_pll_user_p) = { "fin_pll", "sclk_bus_pll", };
>>> ...
>>>> +
>>>> +static struct samsung_mux_clock top_mux_clks[] __initdata = {
>>>
>>>> + MUX(CLK_MOUT_BUS_PLL_USER, "mout_bus_pll_user", mout_bus_pll_user_p,
>>>> + MUX_SEL_TOP1, 0, 1),
>>> ...
>>>> +};
>>>> +
>>>> +static struct samsung_div_clock top_div_clks[] __initdata = {
>>> ...
>>>> + /* DIV_TOP3 */
>>>> + DIV(CLK_DIV_ACLK_IMEM_SSSX_266, "div_aclk_imem_sssx_266",
>>>> + "mout_bus_pll_user", DIV_TOP3, 24, 3),
>>>
>>> Shouldn't "fin_pll" be renamed to "oscclk" ? In the documentation
>>> the root clock (from XXTI input pin) seems to be referred as OSCCLK.
>>> And I can't see "fin_pll" clock registered anywhere. Shouldn't there
>>> be a "fixed-rate-clock" as a parent of at least CMU_TOP? e.g.
>>
>> Right,
>> I added "fin_pll" fixed clock in DT as following:
>> When I registered "fin_pll" fixed clock, I could use "fin_pll" clock
>> for exynos5433 cmu without adding additional dt node.
>>
>> fin_pll: xxti {
>> compatible = "fixed-clock";
>> clock-output-names = "fin_pll";
>> #clock-cells = <0>;
>> };
>>
>> I'll add the example of "fin_pll" dt node to documentation for exynos5433 cmu.
>
> OK, thanks. But I think it needs to be named "oscclk", FIN_PLL is almost
> not existent in the SoC's documentation.
> I'd suggest to define the root oscillator clock (XXTI/OSCCLK) as "oscclk"
> in DT, rather than registering "fin_pll" fixed clock in the driver.
OK,
I'll fix it by using "oscclk" clock name instead of "fin_pll".
>
>>> xxti: xxti {
>>> compatible = "fixed-clock";
>>> #clock-cells = <0>;
>>> clock-output-names = "oscclk";
>>> clock-frequency = <24000000>;
>>> };
>>>
>>> &cmu_top {
>>> clocks = <&xxti>;
>>> };
Best Regards,
Chanwoo Choi
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v3 02/12] clk: samsung: exynos5433: Add MUX clocks of CMU_TOP domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 03/12] clk: samsung: exynos5433: Add clocks for CMU_PERIC domain Chanwoo Choi
` (9 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the MUX (multiplexer) clocks for CMU_TOP domain of Exynos5433.
CMU_TOP domain provides source clocks to other CMU domains.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
drivers/clk/samsung/clk-exynos5433.c | 90 ++++++++++++++++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 31 +++++++++++-
2 files changed, 119 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 59a87bc..077fa61 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -208,6 +208,7 @@ PNAME(mout_mphy_pll_user_p) = { "fin_pll", "sclk_mphy_pll", };
PNAME(mout_mfc_pll_user_p) = { "fin_pll", "sclk_mfc_pll", };
PNAME(mout_bus_pll_user_p) = { "fin_pll", "sclk_bus_pll", };
PNAME(mout_bus_pll_user_t_p) = { "fin_pll", "mout_bus_pll_user", };
+PNAME(mout_mphy_pll_user_t_p) = { "fin_pll", "mout_mphy_pll_user", };
PNAME(mout_bus_mfc_pll_user_p) = { "mout_bus_pll_user", "mout_mfc_pll_user",};
PNAME(mout_mfc_bus_pll_user_p) = { "mout_mfc_pll_user", "mout_bus_pll_user",};
@@ -215,6 +216,12 @@ PNAME(mout_aclk_cam1_552_b_p) = { "mout_aclk_cam1_552_a",
"mout_mfc_pll_user", };
PNAME(mout_aclk_cam1_552_a_p) = { "mout_isp_pll", "mout_bus_pll_user", };
+PNAME(mout_aclk_mfc_400_c_p) = { "mout_aclk_mfc_400_b",
+ "mout_mphy_pll_user", };
+PNAME(mout_aclk_mfc_400_b_p) = { "mout_aclk_mfc_400_a",
+ "mout_bus_pll_user", };
+PNAME(mout_aclk_mfc_400_a_p) = { "mout_mfc_pll_user", "mout_isp_pll", };
+
PNAME(mout_bus_mphy_pll_user_p) = { "mout_bus_pll_user",
"mout_mphy_pll_user", };
PNAME(mout_aclk_mscl_b_p) = { "mout_aclk_mscl_400_a",
@@ -231,6 +238,21 @@ PNAME(mout_sclk_mmc0_d_p) = { "mout_sclk_mmc0_c", "mout_isp_pll", };
PNAME(mout_sclk_mmc0_c_p) = { "mout_sclk_mmc0_b", "mout_mphy_pll_user",};
PNAME(mout_sclk_mmc0_b_p) = { "mout_sclk_mmc0_a", "mout_mfc_pll_user", };
+PNAME(mout_sclk_spdif_p) = { "sclk_audio0", "sclk_audio1",
+ "fin_pll", "ioclk_spdif_extclk", };
+PNAME(mout_sclk_audio1_p) = { "ioclk_audiocdclk1", "fin_pll",
+ "mout_aud_pll_user_t",};
+PNAME(mout_sclk_audio0_p) = { "ioclk_audiocdclk0", "fin_pll",
+ "mout_aud_pll_user_t",};
+
+static struct samsung_fixed_rate_clock top_fixed_clks[] __initdata = {
+ /* Xi2s{0|1}CDCLK input clock for I2S/PCM */
+ FRATE(0, "ioclk_audiocdclk1", NULL, CLK_IS_ROOT, 100000000),
+ FRATE(0, "ioclk_audiocdclk0", NULL, CLK_IS_ROOT, 100000000),
+ /* Xi2s1SDI input clock for SPDIF */
+ FRATE(0, "ioclk_spdif_extclk", NULL, CLK_IS_ROOT, 100000000),
+};
+
static struct samsung_mux_clock top_mux_clks[] __initdata = {
/* MUX_SEL_TOP0 */
MUX(CLK_MOUT_AUD_PLL, "mout_aud_pll", mout_aud_pll_p, MUX_SEL_TOP0,
@@ -276,6 +298,14 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
MUX(CLK_MOUT_ACLK_G2D_400_A, "mout_aclk_g2d_400_a",
mout_bus_mfc_pll_user_p, MUX_SEL_TOP3, 0, 1),
+ /* MUX_SEL_TOP4 */
+ MUX(CLK_MOUT_ACLK_MFC_400_C, "mout_aclk_mfc_400_c",
+ mout_aclk_mfc_400_c_p, MUX_SEL_TOP4, 8, 1),
+ MUX(CLK_MOUT_ACLK_MFC_400_B, "mout_aclk_mfc_400_b",
+ mout_aclk_mfc_400_b_p, MUX_SEL_TOP4, 4, 1),
+ MUX(CLK_MOUT_ACLK_MFC_400_A, "mout_aclk_mfc_400_a",
+ mout_aclk_mfc_400_a_p, MUX_SEL_TOP4, 0, 1),
+
/* MUX_SEL_TOP_MSCL */
MUX(CLK_MOUT_SCLK_JPEG_C, "mout_sclk_jpeg_c", mout_sclk_jpeg_c_p,
MUX_SEL_TOP_MSCL, 8, 1),
@@ -284,6 +314,20 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
MUX(CLK_MOUT_SCLK_JPEG_A, "mout_sclk_jpeg_a", mout_bus_pll_user_t_p,
MUX_SEL_TOP_MSCL, 0, 1),
+ /* MUX_SEL_TOP_CAM1 */
+ MUX(CLK_MOUT_SCLK_ISP_SENSOR2, "mout_sclk_isp_sensor2",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_CAM1, 24, 1),
+ MUX(CLK_MOUT_SCLK_ISP_SENSOR1, "mout_sclk_isp_sensor1",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_CAM1, 20, 1),
+ MUX(CLK_MOUT_SCLK_ISP_SENSOR0, "mout_sclk_isp_sensor0",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_CAM1, 16, 1),
+ MUX(CLK_MOUT_SCLK_ISP_UART, "mout_sclk_isp_uart",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_CAM1, 8, 1),
+ MUX(CLK_MOUT_SCLK_ISP_SPI1, "mout_sclk_isp_spi1",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_CAM1, 4, 1),
+ MUX(CLK_MOUT_SCLK_ISP_SPI0, "mout_sclk_isp_spi0",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_CAM1, 0, 1),
+
/* MUX_SEL_TOP_FSYS0 */
MUX(CLK_MOUT_SCLK_MMC2_B, "mout_sclk_mmc2_b", mout_sclk_mmc2_b_p,
MUX_SEL_TOP_FSYS0, 28, 1),
@@ -302,6 +346,16 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
MUX(CLK_MOUT_SCLK_MMC0_A, "mout_sclk_mmc0_a", mout_bus_pll_user_t_p,
MUX_SEL_TOP_FSYS0, 0, 1),
+ /* MUX_SEL_TOP_FSYS1 */
+ MUX(CLK_MOUT_SCLK_PCIE_100, "mout_sclk_pcie_100", mout_bus_pll_user_t_p,
+ MUX_SEL_TOP_FSYS1, 12, 1),
+ MUX(CLK_MOUT_SCLK_UFSUNIPRO, "mout_sclk_ufsunipro",
+ mout_mphy_pll_user_t_p, MUX_SEL_TOP_FSYS1, 8, 1),
+ MUX(CLK_MOUT_SCLK_USBHOST30, "mout_sclk_usbhost30",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_FSYS1, 4, 1),
+ MUX(CLK_MOUT_SCLK_USBDRD30, "mout_sclk_usbdrd30",
+ mout_bus_pll_user_t_p, MUX_SEL_TOP_FSYS1, 0, 1),
+
/* MUX_SEL_TOP_PERIC0 */
MUX(CLK_MOUT_SCLK_SPI4, "mout_sclk_spi4", mout_bus_pll_user_t_p,
MUX_SEL_TOP_PERIC0, 28, 1),
@@ -319,6 +373,16 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
MUX_SEL_TOP_PERIC0, 4, 1),
MUX(CLK_MOUT_SCLK_SPI0, "mout_sclk_spi0", mout_bus_pll_user_t_p,
MUX_SEL_TOP_PERIC0, 0, 1),
+
+ /* MUX_SEL_TOP_PERIC1 */
+ MUX(CLK_MOUT_SCLK_SLIMBUS, "mout_sclk_slimbus", mout_aud_pll_user_p,
+ MUX_SEL_TOP_PERIC1, 16, 1),
+ MUX(CLK_MOUT_SCLK_SPDIF, "mout_sclk_spdif", mout_sclk_spdif_p,
+ MUX_SEL_TOP_PERIC1, 12, 2),
+ MUX(CLK_MOUT_SCLK_AUDIO1, "mout_sclk_audio1", mout_sclk_audio1_p,
+ MUX_SEL_TOP_PERIC1, 4, 2),
+ MUX(CLK_MOUT_SCLK_AUDIO0, "mout_sclk_audio0", mout_sclk_audio0_p,
+ MUX_SEL_TOP_PERIC1, 0, 2),
};
static struct samsung_div_clock top_div_clks[] __initdata = {
@@ -382,6 +446,16 @@ static struct samsung_div_clock top_div_clks[] __initdata = {
DIV(CLK_DIV_SCLK_UART0, "div_sclk_uart0", "mout_sclk_uart1",
DIV_TOP_PERIC2, 0, 4),
+ /* DIV_TOP_PERIC3 */
+ DIV(CLK_DIV_SCLK_I2S1, "div_sclk_i2s1", "sclk_audio1",
+ DIV_TOP_PERIC3, 16, 6),
+ DIV(CLK_DIV_SCLK_PCM1, "div_sclk_pcm1", "sclk_audio1",
+ DIV_TOP_PERIC3, 8, 8),
+ DIV(CLK_DIV_SCLK_AUDIO1, "div_sclk_audio1", "mout_sclk_audio1",
+ DIV_TOP_PERIC3, 4, 4),
+ DIV(CLK_DIV_SCLK_AUDIO0, "div_sclk_audio0", "mout_sclk_audio0",
+ DIV_TOP_PERIC3, 0, 4),
+
/* DIV_TOP_PERIC4 */
DIV(CLK_DIV_SCLK_SPI4_B, "div_sclk_spi4_b", "div_sclk_spi4_a",
DIV_TOP_PERIC4, 16, 8),
@@ -418,6 +492,12 @@ static struct samsung_gate_clock top_gate_clks[] __initdata = {
ENABLE_SCLK_TOP_PERIC, 12, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI3_PERIC, "sclk_spi3_peric", "div_sclk_spi3_b",
ENABLE_SCLK_TOP_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPDIF_PERIC, "sclk_spdif_peric", "mout_sclk_spdif",
+ ENABLE_SCLK_TOP_PERIC, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_I2S1_PERIC, "sclk_i2s1_peric", "div_sclk_i2s1",
+ ENABLE_SCLK_TOP_PERIC, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PCM1_PERIC, "sclk_pcm1_peric", "div_sclk_pcm1",
+ ENABLE_SCLK_TOP_PERIC, 7, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART2_PERIC, "sclk_uart2_peric", "div_sclk_uart2",
ENABLE_SCLK_TOP_PERIC, 5, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART1_PERIC, "sclk_uart1_peric", "div_sclk_uart1",
@@ -430,6 +510,14 @@ static struct samsung_gate_clock top_gate_clks[] __initdata = {
ENABLE_SCLK_TOP_PERIC, 1, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI0_PERIC, "sclk_spi0_peric", "div_sclk_spi0_b",
ENABLE_SCLK_TOP_PERIC, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* MUX_ENABLE_TOP_PERIC1 */
+ GATE(CLK_SCLK_SLIMBUS, "sclk_slimbus", "mout_sclk_slimbus",
+ MUX_ENABLE_TOP_PERIC1, 16, 0, 0),
+ GATE(CLK_SCLK_AUDIO1, "sclk_audio1", "div_sclk_audio1",
+ MUX_ENABLE_TOP_PERIC1, 4, 0, 0),
+ GATE(CLK_SCLK_AUDIO0, "sclk_audio0", "div_sclk_audio0",
+ MUX_ENABLE_TOP_PERIC1, 0, 0, 0),
};
/*
@@ -516,6 +604,8 @@ static struct samsung_cmu_info top_cmu_info __initdata = {
.nr_div_clks = ARRAY_SIZE(top_div_clks),
.gate_clks = top_gate_clks,
.nr_gate_clks = ARRAY_SIZE(top_gate_clks),
+ .fixed_clks = top_fixed_clks,
+ .nr_fixed_clks = ARRAY_SIZE(top_fixed_clks),
.nr_clk_ids = TOP_NR_CLK,
.clk_regs = top_clk_regs,
.nr_clk_regs = ARRAY_SIZE(top_clk_regs),
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 5cd0201..6025006 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -51,6 +51,23 @@
#define CLK_MOUT_SCLK_SPI2 44
#define CLK_MOUT_SCLK_SPI1 45
#define CLK_MOUT_SCLK_SPI0 46
+#define CLK_MOUT_ACLK_MFC_400_C 47
+#define CLK_MOUT_ACLK_MFC_400_B 48
+#define CLK_MOUT_ACLK_MFC_400_A 49
+#define CLK_MOUT_SCLK_ISP_SENSOR2 50
+#define CLK_MOUT_SCLK_ISP_SENSOR1 51
+#define CLK_MOUT_SCLK_ISP_SENSOR0 52
+#define CLK_MOUT_SCLK_ISP_UART 53
+#define CLK_MOUT_SCLK_ISP_SPI1 54
+#define CLK_MOUT_SCLK_ISP_SPI0 55
+#define CLK_MOUT_SCLK_PCIE_100 56
+#define CLK_MOUT_SCLK_UFSUNIPRO 57
+#define CLK_MOUT_SCLK_USBHOST30 58
+#define CLK_MOUT_SCLK_USBDRD30 59
+#define CLK_MOUT_SCLK_SLIMBUS 60
+#define CLK_MOUT_SCLK_SPDIF 61
+#define CLK_MOUT_SCLK_AUDIO1 62
+#define CLK_MOUT_SCLK_AUDIO0 63
#define CLK_DIV_ACLK_FSYS_200 100
#define CLK_DIV_ACLK_IMEM_SSSX_266 101
@@ -79,6 +96,10 @@
#define CLK_DIV_SCLK_SPI4_A 124
#define CLK_DIV_SCLK_SPI3_B 125
#define CLK_DIV_SCLK_SPI3_A 126
+#define CLK_DIV_SCLK_I2S1 127
+#define CLK_DIV_SCLK_PCM1 128
+#define CLK_DIV_SCLK_AUDIO1 129
+#define CLK_DIV_SCLK_AUDIO0 130
#define CLK_ACLK_PERIC_66 200
#define CLK_ACLK_PERIS_66 201
@@ -94,8 +115,14 @@
#define CLK_SCLK_SPI2_PERIC 211
#define CLK_SCLK_SPI1_PERIC 212
#define CLK_SCLK_SPI0_PERIC 213
-
-#define TOP_NR_CLK 214
+#define CLK_SCLK_SPDIF_PERIC 214
+#define CLK_SCLK_I2S1_PERIC 215
+#define CLK_SCLK_PCM1_PERIC 216
+#define CLK_SCLK_SLIMBUS 217
+#define CLK_SCLK_AUDIO1 218
+#define CLK_SCLK_AUDIO0 219
+
+#define TOP_NR_CLK 220
/* CMU_CPIF */
#define CLK_FOUT_MPHY_PLL 1
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 03/12] clk: samsung: exynos5433: Add clocks for CMU_PERIC domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 01/12] clk: samsung: exynos5433: Add clocks using common clock framework Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 02/12] clk: samsung: exynos5433: Add MUX clocks of CMU_TOP domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 04/12] clk: samsung: exynos5433: Add clocks for CMU_PERIS domain Chanwoo Choi
` (8 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel, Inha Song
This patch adds missing divider/gate clocks of CMU_PERIC domain
which includes I2S/PCM/SPDIF/PWM/SLIMBUS IPs. The SPI/I2S may use
external input clock which has 'ioclk_*' prefix.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[ideal.song: Change clk flags of to pclk_gpio_* clk, pclk_gpio_* should be always on.]
Signed-off-by: Inha Song <ideal.song@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
drivers/clk/samsung/clk-exynos5433.c | 83 +++++++++++++++++++++++++++++++++-
include/dt-bindings/clock/exynos5433.h | 34 +++++++++++++-
2 files changed, 114 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 077fa61..cfc9d69 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -251,6 +251,14 @@ static struct samsung_fixed_rate_clock top_fixed_clks[] __initdata = {
FRATE(0, "ioclk_audiocdclk0", NULL, CLK_IS_ROOT, 100000000),
/* Xi2s1SDI input clock for SPDIF */
FRATE(0, "ioclk_spdif_extclk", NULL, CLK_IS_ROOT, 100000000),
+ /* XspiCLK[4:0] input clock for SPI */
+ FRATE(0, "ioclk_spi4_clk_in", NULL, CLK_IS_ROOT, 50000000),
+ FRATE(0, "ioclk_spi3_clk_in", NULL, CLK_IS_ROOT, 50000000),
+ FRATE(0, "ioclk_spi2_clk_in", NULL, CLK_IS_ROOT, 50000000),
+ FRATE(0, "ioclk_spi1_clk_in", NULL, CLK_IS_ROOT, 50000000),
+ FRATE(0, "ioclk_spi0_clk_in", NULL, CLK_IS_ROOT, 50000000),
+ /* Xi2s1SCLK input clock for I2S1_BCLK */
+ FRATE(0, "ioclk_i2s1_bclk_in", NULL, CLK_IS_ROOT, 12288000),
};
static struct samsung_mux_clock top_mux_clks[] __initdata = {
@@ -756,6 +764,7 @@ CLK_OF_DECLARE(exynos5433_cmu_mif, "samsung,exynos5433-cmu-mif",
* Register offset definitions for CMU_PERIC
*/
#define DIV_PERIC 0x0600
+#define DIV_STAT_PERIC 0x0700
#define ENABLE_ACLK_PERIC 0x0800
#define ENABLE_PCLK_PERIC0 0x0900
#define ENABLE_PCLK_PERIC1 0x0904
@@ -766,6 +775,7 @@ CLK_OF_DECLARE(exynos5433_cmu_mif, "samsung,exynos5433-cmu-mif",
static unsigned long peric_clk_regs[] __initdata = {
DIV_PERIC,
+ DIV_STAT_PERIC,
ENABLE_ACLK_PERIC,
ENABLE_PCLK_PERIC0,
ENABLE_PCLK_PERIC1,
@@ -775,14 +785,57 @@ static unsigned long peric_clk_regs[] __initdata = {
ENABLE_IP_PERIC2,
};
+static struct samsung_div_clock peric_div_clks[] __initdata = {
+ /* DIV_PERIC */
+ DIV(CLK_DIV_SCLK_SCI, "div_sclk_sci", "fin_pll", DIV_PERIC, 4, 4),
+ DIV(CLK_DIV_SCLK_SC_IN, "div_sclk_sc_in", "fin_pll", DIV_PERIC, 0, 4),
+};
+
static struct samsung_gate_clock peric_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_PERIC */
+ GATE(CLK_ACLK_AHB2APB_PERIC2P, "aclk_ahb2apb_peric2p", "aclk_peric_66",
+ ENABLE_ACLK_PERIC, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_PERIC1P, "aclk_ahb2apb_peric1p", "aclk_peric_66",
+ ENABLE_ACLK_PERIC, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_PERIC0P, "aclk_ahb2apb_peric0p", "aclk_peric_66",
+ ENABLE_ACLK_PERIC, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PERICNP_66, "aclk_pericnp_66", "aclk_peric_66",
+ ENABLE_ACLK_PERIC, 0, CLK_IGNORE_UNUSED, 0),
+
/* ENABLE_PCLK_PERIC0 */
+ GATE(CLK_PCLK_SCI, "pclk_sci", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 31, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_GPIO_FINGER, "pclk_gpio_finger", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 30, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_GPIO_ESE, "pclk_gpio_ese", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 29, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PWM, "pclk_pwm", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 28, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_SPDIF, "pclk_spdif", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 26, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_PCM1, "pclk_pcm1", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 25, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_I2S1, "pclk_i2s", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 24, CLK_SET_RATE_PARENT, 0),
GATE(CLK_PCLK_SPI2, "pclk_spi2", "aclk_peric_66", ENABLE_PCLK_PERIC0,
23, CLK_SET_RATE_PARENT, 0),
GATE(CLK_PCLK_SPI1, "pclk_spi1", "aclk_peric_66", ENABLE_PCLK_PERIC0,
22, CLK_SET_RATE_PARENT, 0),
GATE(CLK_PCLK_SPI0, "pclk_spi0", "aclk_peric_66", ENABLE_PCLK_PERIC0,
21, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_ADCIF, "pclk_adcif", "aclk_peric_66", ENABLE_PCLK_PERIC0,
+ 20, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_GPIO_TOUCH, "pclk_gpio_touch", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 19, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_GPIO_NFC, "pclk_gpio_nfc", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 18, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_GPIO_PERIC, "pclk_gpio_peric", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PMU_PERIC, "pclk_pmu_peric", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_PCLK_SYSREG_PERIC, "pclk_sysreg_peric", "aclk_peric_66",
+ ENABLE_PCLK_PERIC0, 15,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
GATE(CLK_PCLK_UART2, "pclk_uart2", "aclk_peric_66", ENABLE_PCLK_PERIC0,
14, CLK_SET_RATE_PARENT, 0),
GATE(CLK_PCLK_UART1, "pclk_uart1", "aclk_peric_66", ENABLE_PCLK_PERIC0,
@@ -837,15 +890,39 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
ENABLE_PCLK_PERIC1, 0, CLK_SET_RATE_PARENT, 0),
/* ENABLE_SCLK_PERIC */
+ GATE(CLK_SCLK_IOCLK_SPI4, "sclk_ioclk_spi4", "ioclk_spi4_clk_in",
+ ENABLE_SCLK_PERIC, 21, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_IOCLK_SPI3, "sclk_ioclk_spi3", "ioclk_spi3_clk_in",
+ ENABLE_SCLK_PERIC, 20, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI4, "sclk_spi4", "sclk_spi4_peric", ENABLE_SCLK_PERIC,
19, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC,
18, CLK_SET_RATE_PARENT, 0),
-
+ GATE(CLK_SCLK_SCI, "sclk_sci", "div_sclk_sci", ENABLE_SCLK_PERIC,
+ 17, 0, 0),
+ GATE(CLK_SCLK_SC_IN, "sclk_sc_in", "div_sclk_sc_in", ENABLE_SCLK_PERIC,
+ 16, 0, 0),
+ GATE(CLK_SCLK_PWM, "sclk_pwm", "fin_pll", ENABLE_SCLK_PERIC, 15, 0, 0),
+ GATE(CLK_SCLK_IOCLK_SPI2, "sclk_ioclk_spi2", "ioclk_spi2_clk_in",
+ ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
+ ENABLE_SCLK_PERIC, 12,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
+ ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
+ "ioclk_i2s1_bclk_in", ENABLE_SCLK_PERIC, 10,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPDIF, "sclk_spdif", "sclk_spdif_peric",
+ ENABLE_SCLK_PERIC, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PCM1, "sclk_pcm1", "sclk_pcm1_peric",
+ ENABLE_SCLK_PERIC, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_I2S1, "sclk_i2s1", "sclk_i2s1_peric",
+ ENABLE_SCLK_PERIC, 6, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
5, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
- 4, CLK_SET_RATE_PARENT, 0),
+ 4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
3, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",
@@ -857,6 +934,8 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
};
static struct samsung_cmu_info peric_cmu_info __initdata = {
+ .div_clks = peric_div_clks,
+ .nr_div_clks = ARRAY_SIZE(peric_div_clks),
.gate_clks = peric_gate_clks,
.nr_gate_clks = ARRAY_SIZE(peric_gate_clks),
.nr_clk_ids = PERIC_NR_CLK,
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 6025006..62d3ec7 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -181,8 +181,40 @@
#define CLK_SCLK_UART2 34
#define CLK_SCLK_UART1 35
#define CLK_SCLK_UART0 36
+#define CLK_ACLK_AHB2APB_PERIC2P 37
+#define CLK_ACLK_AHB2APB_PERIC1P 38
+#define CLK_ACLK_AHB2APB_PERIC0P 39
+#define CLK_ACLK_PERICNP_66 40
+#define CLK_PCLK_SCI 41
+#define CLK_PCLK_GPIO_FINGER 42
+#define CLK_PCLK_GPIO_ESE 43
+#define CLK_PCLK_PWM 44
+#define CLK_PCLK_SPDIF 45
+#define CLK_PCLK_PCM1 46
+#define CLK_PCLK_I2S1 47
+#define CLK_PCLK_ADCIF 48
+#define CLK_PCLK_GPIO_TOUCH 49
+#define CLK_PCLK_GPIO_NFC 50
+#define CLK_PCLK_GPIO_PERIC 51
+#define CLK_PCLK_PMU_PERIC 52
+#define CLK_PCLK_SYSREG_PERIC 53
+#define CLK_SCLK_IOCLK_SPI4 54
+#define CLK_SCLK_IOCLK_SPI3 55
+#define CLK_SCLK_SCI 56
+#define CLK_SCLK_SC_IN 57
+#define CLK_SCLK_PWM 58
+#define CLK_SCLK_IOCLK_SPI2 59
+#define CLK_SCLK_IOCLK_SPI1 60
+#define CLK_SCLK_IOCLK_SPI0 61
+#define CLK_SCLK_IOCLK_I2S1_BCLK 62
+#define CLK_SCLK_SPDIF 63
+#define CLK_SCLK_PCM1 64
+#define CLK_SCLK_I2S1 65
-#define PERIC_NR_CLK 37
+#define CLK_DIV_SCLK_SCI 70
+#define CLK_DIV_SCLK_SC_IN 71
+
+#define PERIC_NR_CLK 72
/* CMU_PERIS */
#define CLK_PCLK_HPM_APBIF 1
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 04/12] clk: samsung: exynos5433: Add clocks for CMU_PERIS domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (2 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 03/12] clk: samsung: exynos5433: Add clocks for CMU_PERIC domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 05/12] clk: samsung: exynos5433: Add clocks for CMU_G2D domain Chanwoo Choi
` (7 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds missing gate clocks of CMU_PERIS domain
which includes TMU/TZPC/SECKEY/CHIPID/TOPRTC/EFUSE IPs.
The special clocks of CMU_PERIS use fin_pll source clock directly.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
drivers/clk/samsung/clk-exynos5433.c | 151 ++++++++++++++++++++++++++++++++-
include/dt-bindings/clock/exynos5433.h | 33 ++++++-
2 files changed, 181 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index cfc9d69..88e8651 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -245,6 +245,10 @@ PNAME(mout_sclk_audio1_p) = { "ioclk_audiocdclk1", "fin_pll",
PNAME(mout_sclk_audio0_p) = { "ioclk_audiocdclk0", "fin_pll",
"mout_aud_pll_user_t",};
+static struct samsung_fixed_factor_clock top_fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "oscclk_efuse_common", "fin_pll", 1, 1, 0),
+};
+
static struct samsung_fixed_rate_clock top_fixed_clks[] __initdata = {
/* Xi2s{0|1}CDCLK input clock for I2S/PCM */
FRATE(0, "ioclk_audiocdclk1", NULL, CLK_IS_ROOT, 100000000),
@@ -614,6 +618,8 @@ static struct samsung_cmu_info top_cmu_info __initdata = {
.nr_gate_clks = ARRAY_SIZE(top_gate_clks),
.fixed_clks = top_fixed_clks,
.nr_fixed_clks = ARRAY_SIZE(top_fixed_clks),
+ .fixed_factor_clks = top_fixed_factor_clks,
+ .nr_fixed_factor_clks = ARRAY_SIZE(top_fixed_factor_clks),
.nr_clk_ids = TOP_NR_CLK,
.clk_regs = top_clk_regs,
.nr_clk_regs = ARRAY_SIZE(top_clk_regs),
@@ -954,15 +960,69 @@ CLK_OF_DECLARE(exynos5433_cmu_peric, "samsung,exynos5433-cmu-peric",
/*
* Register offset definitions for CMU_PERIS
*/
-#define ENABLE_ACLK_PERIS 0x0800
-#define ENABLE_PCLK_PERIS 0x0900
+#define ENABLE_ACLK_PERIS 0x0800
+#define ENABLE_PCLK_PERIS 0x0900
+#define ENABLE_PCLK_PERIS_SECURE_TZPC 0x0904
+#define ENABLE_PCLK_PERIS_SECURE_SECKEY_APBIF 0x0908
+#define ENABLE_PCLK_PERIS_SECURE_CHIPID_APBIF 0x090c
+#define ENABLE_PCLK_PERIS_SECURE_TOPRTC 0x0910
+#define ENABLE_PCLK_PERIS_SECURE_CUSTOM_EFUSE_APBIF 0x0914
+#define ENABLE_PCLK_PERIS_SECURE_ANTIRBK_CNT_APBIF 0x0918
+#define ENABLE_PCLK_PERIS_SECURE_OTP_CON_APBIF 0x091c
+#define ENABLE_SCLK_PERIS 0x0a00
+#define ENABLE_SCLK_PERIS_SECURE_SECKEY 0x0a04
+#define ENABLE_SCLK_PERIS_SECURE_CHIPID 0x0a08
+#define ENABLE_SCLK_PERIS_SECURE_TOPRTC 0x0a0c
+#define ENABLE_SCLK_PERIS_SECURE_CUSTOM_EFUSE 0x0a10
+#define ENABLE_SCLK_PERIS_SECURE_ANTIRBK_CNT 0x0a14
+#define ENABLE_SCLK_PERIS_SECURE_OTP_CON 0x0a18
+#define ENABLE_IP_PERIS0 0x0b00
+#define ENABLE_IP_PERIS1 0x0b04
+#define ENABLE_IP_PERIS_SECURE_TZPC 0x0b08
+#define ENABLE_IP_PERIS_SECURE_SECKEY 0x0b0c
+#define ENABLE_IP_PERIS_SECURE_CHIPID 0x0b10
+#define ENABLE_IP_PERIS_SECURE_TOPRTC 0x0b14
+#define ENABLE_IP_PERIS_SECURE_CUSTOM_EFUSE 0x0b18
+#define ENABLE_IP_PERIS_SECURE_ANTIBRK_CNT 0x0b1c
+#define ENABLE_IP_PERIS_SECURE_OTP_CON 0x0b20
static unsigned long peris_clk_regs[] __initdata = {
ENABLE_ACLK_PERIS,
ENABLE_PCLK_PERIS,
+ ENABLE_PCLK_PERIS_SECURE_TZPC,
+ ENABLE_PCLK_PERIS_SECURE_SECKEY_APBIF,
+ ENABLE_PCLK_PERIS_SECURE_CHIPID_APBIF,
+ ENABLE_PCLK_PERIS_SECURE_TOPRTC,
+ ENABLE_PCLK_PERIS_SECURE_CUSTOM_EFUSE_APBIF,
+ ENABLE_PCLK_PERIS_SECURE_ANTIRBK_CNT_APBIF,
+ ENABLE_PCLK_PERIS_SECURE_OTP_CON_APBIF,
+ ENABLE_SCLK_PERIS,
+ ENABLE_SCLK_PERIS_SECURE_SECKEY,
+ ENABLE_SCLK_PERIS_SECURE_CHIPID,
+ ENABLE_SCLK_PERIS_SECURE_TOPRTC,
+ ENABLE_SCLK_PERIS_SECURE_CUSTOM_EFUSE,
+ ENABLE_SCLK_PERIS_SECURE_ANTIRBK_CNT,
+ ENABLE_SCLK_PERIS_SECURE_OTP_CON,
+ ENABLE_IP_PERIS0,
+ ENABLE_IP_PERIS1,
+ ENABLE_IP_PERIS_SECURE_TZPC,
+ ENABLE_IP_PERIS_SECURE_SECKEY,
+ ENABLE_IP_PERIS_SECURE_CHIPID,
+ ENABLE_IP_PERIS_SECURE_TOPRTC,
+ ENABLE_IP_PERIS_SECURE_CUSTOM_EFUSE,
+ ENABLE_IP_PERIS_SECURE_ANTIBRK_CNT,
+ ENABLE_IP_PERIS_SECURE_OTP_CON,
};
static struct samsung_gate_clock peris_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_PERIS */
+ GATE(CLK_ACLK_AHB2APB_PERIS1P, "aclk_ahb2apb_peris1p", "aclk_peris_66",
+ ENABLE_ACLK_PERIS, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_PERIS0P, "aclk_ahb2apb_peris0p", "aclk_peris_66",
+ ENABLE_ACLK_PERIS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PERISNP_66, "aclk_perisnp_66", "aclk_peris_66",
+ ENABLE_ACLK_PERIS, 0, CLK_IGNORE_UNUSED, 0),
+
/* ENABLE_PCLK_PERIS */
GATE(CLK_PCLK_HPM_APBIF, "pclk_hpm_apbif", "aclk_peris_66",
ENABLE_PCLK_PERIS, 30, CLK_IGNORE_UNUSED, 0),
@@ -984,6 +1044,93 @@ static struct samsung_gate_clock peris_gate_clks[] __initdata = {
ENABLE_PCLK_PERIS, 15, CLK_IGNORE_UNUSED, 0),
GATE(CLK_PCLK_HDMI_CEC, "pclk_hdmi_cec", "aclk_peris_66",
ENABLE_PCLK_PERIS, 14, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_TZPC */
+ GATE(CLK_PCLK_TZPC12, "pclk_tzpc12", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 12, 0, 0),
+ GATE(CLK_PCLK_TZPC11, "pclk_tzpc11", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 11, 0, 0),
+ GATE(CLK_PCLK_TZPC10, "pclk_tzpc10", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 10, 0, 0),
+ GATE(CLK_PCLK_TZPC9, "pclk_tzpc9", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 9, 0, 0),
+ GATE(CLK_PCLK_TZPC8, "pclk_tzpc8", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 8, 0, 0),
+ GATE(CLK_PCLK_TZPC7, "pclk_tzpc7", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 7, 0, 0),
+ GATE(CLK_PCLK_TZPC6, "pclk_tzpc6", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 6, 0, 0),
+ GATE(CLK_PCLK_TZPC5, "pclk_tzpc5", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 5, 0, 0),
+ GATE(CLK_PCLK_TZPC4, "pclk_tzpc4", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 4, 0, 0),
+ GATE(CLK_PCLK_TZPC3, "pclk_tzpc3", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 3, 0, 0),
+ GATE(CLK_PCLK_TZPC2, "pclk_tzpc2", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 2, 0, 0),
+ GATE(CLK_PCLK_TZPC1, "pclk_tzpc1", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 1, 0, 0),
+ GATE(CLK_PCLK_TZPC0, "pclk_tzpc0", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TZPC, 0, 0, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_SECKEY_APBIF */
+ GATE(CLK_PCLK_SECKEY_APBIF, "pclk_seckey_apbif", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_SECKEY_APBIF, 0, 0, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_CHIPID_APBIF */
+ GATE(CLK_PCLK_CHIPID_APBIF, "pclk_chipid_apbif", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_CHIPID_APBIF, 0, 0, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_TOPRTC */
+ GATE(CLK_PCLK_TOPRTC, "pclk_toprtc", "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_TOPRTC, 0, 0, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_CUSTOM_EFUSE_APBIF */
+ GATE(CLK_PCLK_CUSTOM_EFUSE_APBIF, "pclk_custom_efuse_apbif",
+ "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_CUSTOM_EFUSE_APBIF, 0, 0, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_ANTIRBK_CNT_APBIF */
+ GATE(CLK_PCLK_ANTIRBK_CNT_APBIF, "pclk_antirbk_cnt_apbif",
+ "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_ANTIRBK_CNT_APBIF, 0, 0, 0),
+
+ /* ENABLE_PCLK_PERIS_SECURE_OTP_CON_APBIF */
+ GATE(CLK_PCLK_OTP_CON_APBIF, "pclk_otp_con_apbif",
+ "aclk_peris_66",
+ ENABLE_PCLK_PERIS_SECURE_OTP_CON_APBIF, 0, 0, 0),
+
+ /* ENABLE_SCLK_PERIS */
+ GATE(CLK_SCLK_ASV_TB, "sclk_asv_tb", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS, 10, 0, 0),
+ GATE(CLK_SCLK_TMU1, "sclk_tmu1", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS, 4, 0, 0),
+ GATE(CLK_SCLK_TMU0, "sclk_tmu0", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS, 3, 0, 0),
+
+ /* ENABLE_SCLK_PERIS_SECURE_SECKEY */
+ GATE(CLK_SCLK_SECKEY, "sclk_seckey", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS_SECURE_SECKEY, 0, 0, 0),
+
+ /* ENABLE_SCLK_PERIS_SECURE_CHIPID */
+ GATE(CLK_SCLK_CHIPID, "sclk_chipid", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS_SECURE_CHIPID, 0, 0, 0),
+
+ /* ENABLE_SCLK_PERIS_SECURE_TOPRTC */
+ GATE(CLK_SCLK_TOPRTC, "sclk_toprtc", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS_SECURE_TOPRTC, 0, 0, 0),
+
+ /* ENABLE_SCLK_PERIS_SECURE_CUSTOM_EFUSE */
+ GATE(CLK_SCLK_CUSTOM_EFUSE, "sclk_custom_efuse", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS_SECURE_CUSTOM_EFUSE, 0, 0, 0),
+
+ /* ENABLE_SCLK_PERIS_SECURE_ANTIRBK_CNT */
+ GATE(CLK_SCLK_ANTIRBK_CNT, "sclk_antirbk_cnt", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS_SECURE_ANTIRBK_CNT, 0, 0, 0),
+
+ /* ENABLE_SCLK_PERIS_SECURE_OTP_CON */
+ GATE(CLK_SCLK_OTP_CON, "sclk_otp_con", "oscclk_efuse_common",
+ ENABLE_SCLK_PERIS_SECURE_OTP_CON, 0, 0, 0),
};
static struct samsung_cmu_info peris_cmu_info __initdata = {
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 62d3ec7..e9fc243 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -227,8 +227,39 @@
#define CLK_PCLK_WDT_ATLAS 8
#define CLK_PCLK_MCT 9
#define CLK_PCLK_HDMI_CEC 10
+#define CLK_ACLK_AHB2APB_PERIS1P 11
+#define CLK_ACLK_AHB2APB_PERIS0P 12
+#define CLK_ACLK_PERISNP_66 13
+#define CLK_PCLK_TZPC12 14
+#define CLK_PCLK_TZPC11 15
+#define CLK_PCLK_TZPC10 16
+#define CLK_PCLK_TZPC9 17
+#define CLK_PCLK_TZPC8 18
+#define CLK_PCLK_TZPC7 19
+#define CLK_PCLK_TZPC6 20
+#define CLK_PCLK_TZPC5 21
+#define CLK_PCLK_TZPC4 22
+#define CLK_PCLK_TZPC3 23
+#define CLK_PCLK_TZPC2 24
+#define CLK_PCLK_TZPC1 25
+#define CLK_PCLK_TZPC0 26
+#define CLK_PCLK_SECKEY_APBIF 27
+#define CLK_PCLK_CHIPID_APBIF 28
+#define CLK_PCLK_TOPRTC 29
+#define CLK_PCLK_CUSTOM_EFUSE_APBIF 30
+#define CLK_PCLK_ANTIRBK_CNT_APBIF 31
+#define CLK_PCLK_OTP_CON_APBIF 32
+#define CLK_SCLK_ASV_TB 33
+#define CLK_SCLK_TMU1 34
+#define CLK_SCLK_TMU0 35
+#define CLK_SCLK_SECKEY 36
+#define CLK_SCLK_CHIPID 37
+#define CLK_SCLK_TOPRTC 38
+#define CLK_SCLK_CUSTOM_EFUSE 39
+#define CLK_SCLK_ANTIRBK_CNT 40
+#define CLK_SCLK_OTP_CON 41
-#define PERIS_NR_CLK 11
+#define PERIS_NR_CLK 42
/* CMU_FSYS */
#define CLK_MOUT_ACLK_FSYS_200_USER 1
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 05/12] clk: samsung: exynos5433: Add clocks for CMU_G2D domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (3 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 04/12] clk: samsung: exynos5433: Add clocks for CMU_PERIS domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 06/12] clk: samsung: exynos5433: Add clocks for CMU_MIF domain Chanwoo Choi
` (6 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds ths mux/divider/gate clocks of CMU_G2D domain which includes
G2D/MDMA IPs. The CMU_G2D must need the clocks related to G2D by providing
CMU_TOP domain. So, this patch add several clocks for G2D from CMU_TOP domain.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 8 ++
drivers/clk/samsung/clk-exynos5433.c | 146 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 42 +++++-
3 files changed, 195 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 72cd0ba..27dd77b 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -19,6 +19,8 @@ Required Properties:
which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
- "samsung,exynos5433-cmu-fsys" - clock controller compatible for CMU_FSYS
which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
+ - "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D
+ which generates clocks for G2D/MDMA IPs.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -70,6 +72,12 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_g2d: clock-controller@0x12460000 {
+ compatible = "samsung,exynos5433-cmu-g2d";
+ reg = <0x12460000 0x0b08>;
+ #clock-cells = <1>;
+ };
+
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 88e8651..9754c3d 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -398,6 +398,20 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
};
static struct samsung_div_clock top_div_clks[] __initdata = {
+ /* DIV_TOP1 */
+ DIV(CLK_DIV_ACLK_GSCL_111, "div_aclk_gscl_111", "mout_aclk_gscl_333",
+ DIV_TOP1, 28, 3),
+ DIV(CLK_DIV_ACLK_GSCL_333, "div_aclk_gscl_333", "mout_aclk_gscl_333",
+ DIV_TOP1, 24, 3),
+ DIV(CLK_DIV_ACLK_HEVC_400, "div_aclk_hevc_400", "mout_aclk_hevc_400",
+ DIV_TOP1, 20, 3),
+ DIV(CLK_DIV_ACLK_MFC_400, "div_aclk_mfc_400", "mout_aclk_mfc_400_c",
+ DIV_TOP1, 12, 3),
+ DIV(CLK_DIV_ACLK_G2D_266, "div_aclk_g2d_266", "mout_bus_pll_user",
+ DIV_TOP1, 8, 3),
+ DIV(CLK_DIV_ACLK_G2D_400, "div_aclk_g2d_400", "mout_aclk_g2d_400_b",
+ DIV_TOP1, 0, 3),
+
/* DIV_TOP2 */
DIV(CLK_DIV_ACLK_FSYS_200, "div_aclk_fsys_200", "mout_bus_pll_user",
DIV_TOP2, 0, 3),
@@ -490,6 +504,12 @@ static struct samsung_gate_clock top_gate_clks[] __initdata = {
GATE(CLK_ACLK_FSYS_200, "aclk_fsys_200", "div_aclk_fsys_200",
ENABLE_ACLK_TOP, 18,
CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G2D_266, "aclk_g2d_266", "div_aclk_g2d_266",
+ ENABLE_ACLK_TOP, 2,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G2D_400, "aclk_g2d_400", "div_aclk_g2d_400",
+ ENABLE_ACLK_TOP, 0,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
/* ENABLE_SCLK_TOP_FSYS */
GATE(CLK_SCLK_MMC2_FSYS, "sclk_mmc2_fsys", "div_sclk_mmc2_b",
@@ -1277,3 +1297,129 @@ static void __init exynos5433_cmu_fsys_init(struct device_node *np)
CLK_OF_DECLARE(exynos5433_cmu_fsys, "samsung,exynos5433-cmu-fsys",
exynos5433_cmu_fsys_init);
+
+/*
+ * Register offset definitions for CMU_G2D
+ */
+#define MUX_SEL_G2D0 0x0200
+#define MUX_SEL_ENABLE_G2D0 0x0300
+#define MUX_SEL_STAT_G2D0 0x0400
+#define DIV_G2D 0x0600
+#define DIV_STAT_G2D 0x0700
+#define DIV_ENABLE_ACLK_G2D 0x0800
+#define DIV_ENABLE_ACLK_G2D_SECURE_SMMU_G2D 0x0804
+#define DIV_ENABLE_PCLK_G2D 0x0900
+#define DIV_ENABLE_PCLK_G2D_SECURE_SMMU_G2D 0x0904
+#define DIV_ENABLE_IP_G2D0 0x0b00
+#define DIV_ENABLE_IP_G2D1 0x0b04
+#define DIV_ENABLE_IP_G2D_SECURE_SMMU_G2D 0x0b08
+
+static unsigned long g2d_clk_regs[] __initdata = {
+ MUX_SEL_G2D0,
+ MUX_SEL_ENABLE_G2D0,
+ MUX_SEL_STAT_G2D0,
+ DIV_G2D,
+ DIV_STAT_G2D,
+ DIV_ENABLE_ACLK_G2D,
+ DIV_ENABLE_ACLK_G2D_SECURE_SMMU_G2D,
+ DIV_ENABLE_PCLK_G2D,
+ DIV_ENABLE_PCLK_G2D_SECURE_SMMU_G2D,
+ DIV_ENABLE_IP_G2D0,
+ DIV_ENABLE_IP_G2D1,
+ DIV_ENABLE_IP_G2D_SECURE_SMMU_G2D,
+};
+
+/* list of all parent clock list */
+PNAME(mout_aclk_g2d_266_user_p) = { "fin_pll", "aclk_g2d_266", };
+PNAME(mout_aclk_g2d_400_user_p) = { "fin_pll", "aclk_g2d_400", };
+
+static struct samsung_mux_clock g2d_mux_clks[] __initdata = {
+ /* MUX_SEL_G2D0 */
+ MUX(CLK_MUX_ACLK_G2D_266_USER, "mout_aclk_g2d_266_user",
+ mout_aclk_g2d_266_user_p, MUX_SEL_G2D0, 4, 1),
+ MUX(CLK_MUX_ACLK_G2D_400_USER, "mout_aclk_g2d_400_user",
+ mout_aclk_g2d_400_user_p, MUX_SEL_G2D0, 0, 1),
+};
+
+static struct samsung_div_clock g2d_div_clks[] __initdata = {
+ /* DIV_G2D */
+ DIV(CLK_DIV_PCLK_G2D, "div_pclk_g2d", "mout_aclk_g2d_266_user",
+ DIV_G2D, 0, 2),
+};
+
+static struct samsung_gate_clock g2d_gate_clks[] __initdata = {
+ /* DIV_ENABLE_ACLK_G2D */
+ GATE(CLK_ACLK_SMMU_MDMA1, "aclk_smmu_mdma1", "mout_aclk_g2d_266_user",
+ DIV_ENABLE_ACLK_G2D, 12, 0, 0),
+ GATE(CLK_ACLK_BTS_MDMA1, "aclk_bts_mdam1", "mout_aclk_g2d_266_user",
+ DIV_ENABLE_ACLK_G2D, 11, 0, 0),
+ GATE(CLK_ACLK_BTS_G2D, "aclk_bts_g2d", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D, 10, 0, 0),
+ GATE(CLK_ACLK_ALB_G2D, "aclk_alb_g2d", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D, 9, 0, 0),
+ GATE(CLK_ACLK_AXIUS_G2DX, "aclk_axius_g2dx", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D, 8, 0, 0),
+ GATE(CLK_ACLK_ASYNCAXI_SYSX, "aclk_asyncaxi_sysx",
+ "mout_aclk_g2d_400_user", DIV_ENABLE_ACLK_G2D,
+ 7, 0, 0),
+ GATE(CLK_ACLK_AHB2APB_G2D1P, "aclk_ahb2apb_g2d1p", "div_pclk_g2d",
+ DIV_ENABLE_ACLK_G2D, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_G2D0P, "aclk_ahb2apb_g2d0p", "div_pclk_g2d",
+ DIV_ENABLE_ACLK_G2D, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_G2DX, "aclk_xiu_g2dx", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G2DNP_133, "aclk_g2dnp_133", "div_pclk_g2d",
+ DIV_ENABLE_ACLK_G2D, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G2DND_400, "aclk_g2dnd_400", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MDMA1, "aclk_mdma1", "mout_aclk_g2d_266_user",
+ DIV_ENABLE_ACLK_G2D, 1, 0, 0),
+ GATE(CLK_ACLK_G2D, "aclk_g2d", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D, 0, 0, 0),
+
+ /* DIV_ENABLE_ACLK_G2D_SECURE_SMMU_G2D */
+ GATE(CLK_ACLK_SMMU_G2D, "aclk_smmu_g2d", "mout_aclk_g2d_400_user",
+ DIV_ENABLE_ACLK_G2D_SECURE_SMMU_G2D, 0, 0, 0),
+
+ /* DIV_ENABLE_PCLK_G2D */
+ GATE(CLK_PCLK_SMMU_MDMA1, "pclk_smmu_mdma1", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 7, 0, 0),
+ GATE(CLK_PCLK_BTS_MDMA1, "pclk_bts_mdam1", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 6, 0, 0),
+ GATE(CLK_PCLK_BTS_G2D, "pclk_bts_g2d", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 5, 0, 0),
+ GATE(CLK_PCLK_ALB_G2D, "pclk_alb_g2d", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 4, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_SYSX, "pclk_asyncaxi_sysx", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 3, 0, 0),
+ GATE(CLK_PCLK_PMU_G2D, "pclk_pmu_g2d", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_G2D, "pclk_sysreg_g2d", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_G2D, "pclk_g2d", "div_pclk_g2d", DIV_ENABLE_PCLK_G2D,
+ 0, 0, 0),
+
+ /* DIV_ENABLE_PCLK_G2D_SECURE_SMMU_G2D */
+ GATE(CLK_PCLK_SMMU_G2D, "pclk_smmu_g2d", "div_pclk_g2d",
+ DIV_ENABLE_PCLK_G2D_SECURE_SMMU_G2D, 0, 0, 0),
+};
+
+static struct samsung_cmu_info g2d_cmu_info __initdata = {
+ .mux_clks = g2d_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(g2d_mux_clks),
+ .div_clks = g2d_div_clks,
+ .nr_div_clks = ARRAY_SIZE(g2d_div_clks),
+ .gate_clks = g2d_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(g2d_gate_clks),
+ .nr_clk_ids = G2D_NR_CLK,
+ .clk_regs = g2d_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(g2d_clk_regs),
+};
+
+static void __init exynos5433_cmu_g2d_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &g2d_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos5433_cmu_g2d, "samsung,exynos5433-cmu-g2d",
+ exynos5433_cmu_g2d_init);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index e9fc243..8e423a6 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -100,6 +100,12 @@
#define CLK_DIV_SCLK_PCM1 128
#define CLK_DIV_SCLK_AUDIO1 129
#define CLK_DIV_SCLK_AUDIO0 130
+#define CLK_DIV_ACLK_GSCL_111 131
+#define CLK_DIV_ACLK_GSCL_333 132
+#define CLK_DIV_ACLK_HEVC_400 133
+#define CLK_DIV_ACLK_MFC_400 134
+#define CLK_DIV_ACLK_G2D_266 135
+#define CLK_DIV_ACLK_G2D_400 136
#define CLK_ACLK_PERIC_66 200
#define CLK_ACLK_PERIS_66 201
@@ -121,8 +127,10 @@
#define CLK_SCLK_SLIMBUS 217
#define CLK_SCLK_AUDIO1 218
#define CLK_SCLK_AUDIO0 219
+#define CLK_ACLK_G2D_266 220
+#define CLK_ACLK_G2D_400 221
-#define TOP_NR_CLK 220
+#define TOP_NR_CLK 222
/* CMU_CPIF */
#define CLK_FOUT_MPHY_PLL 1
@@ -286,4 +294,36 @@
#define FSYS_NR_CLK 66
+/* CMU_G2D */
+#define CLK_MUX_ACLK_G2D_266_USER 1
+#define CLK_MUX_ACLK_G2D_400_USER 2
+
+#define CLK_DIV_PCLK_G2D 3
+
+#define CLK_ACLK_SMMU_MDMA1 4
+#define CLK_ACLK_BTS_MDMA1 5
+#define CLK_ACLK_BTS_G2D 6
+#define CLK_ACLK_ALB_G2D 7
+#define CLK_ACLK_AXIUS_G2DX 8
+#define CLK_ACLK_ASYNCAXI_SYSX 9
+#define CLK_ACLK_AHB2APB_G2D1P 10
+#define CLK_ACLK_AHB2APB_G2D0P 11
+#define CLK_ACLK_XIU_G2DX 12
+#define CLK_ACLK_G2DNP_133 13
+#define CLK_ACLK_G2DND_400 14
+#define CLK_ACLK_MDMA1 15
+#define CLK_ACLK_G2D 16
+#define CLK_ACLK_SMMU_G2D 17
+#define CLK_PCLK_SMMU_MDMA1 18
+#define CLK_PCLK_BTS_MDMA1 19
+#define CLK_PCLK_BTS_G2D 20
+#define CLK_PCLK_ALB_G2D 21
+#define CLK_PCLK_ASYNCAXI_SYSX 22
+#define CLK_PCLK_PMU_G2D 23
+#define CLK_PCLK_SYSREG_G2D 24
+#define CLK_PCLK_G2D 25
+#define CLK_PCLK_SMMU_G2D 26
+
+#define G2D_NR_CLK 27
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 06/12] clk: samsung: exynos5433: Add clocks for CMU_MIF domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (4 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 05/12] clk: samsung: exynos5433: Add clocks for CMU_G2D domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 07/12] clk: samsung: exynos5433: Add clocks for CMU_DISP domain Chanwoo Choi
` (5 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the mux/divider/gate clocks of CMU_MIF domain which includes
the clocks for DMC(DRAM memory controller) and CCI(Cache Coherent Interconnect).
The CMU_MIF domain provides the source clocks for CMU_DISP/CMU_BUS2.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
drivers/clk/samsung/clk-exynos5433.c | 599 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 190 ++++++++++-
2 files changed, 788 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 9754c3d..7e33c68 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -740,6 +740,66 @@ CLK_OF_DECLARE(exynos5433_cmu_cpif, "samsung,exynos5433-cmu-cpif",
#define MFC_PLL_CON0 0x0130
#define MFC_PLL_CON1 0x0134
#define MFC_PLL_FREQ_DET 0x013c
+#define MUX_SEL_MIF0 0x0200
+#define MUX_SEL_MIF1 0x0204
+#define MUX_SEL_MIF2 0x0208
+#define MUX_SEL_MIF3 0x020c
+#define MUX_SEL_MIF4 0x0210
+#define MUX_SEL_MIF5 0x0214
+#define MUX_SEL_MIF6 0x0218
+#define MUX_SEL_MIF7 0x021c
+#define MUX_ENABLE_MIF0 0x0300
+#define MUX_ENABLE_MIF1 0x0304
+#define MUX_ENABLE_MIF2 0x0308
+#define MUX_ENABLE_MIF3 0x030c
+#define MUX_ENABLE_MIF4 0x0310
+#define MUX_ENABLE_MIF5 0x0314
+#define MUX_ENABLE_MIF6 0x0318
+#define MUX_ENABLE_MIF7 0x031c
+#define MUX_STAT_MIF0 0x0400
+#define MUX_STAT_MIF1 0x0404
+#define MUX_STAT_MIF2 0x0408
+#define MUX_STAT_MIF3 0x040c
+#define MUX_STAT_MIF4 0x0410
+#define MUX_STAT_MIF5 0x0414
+#define MUX_STAT_MIF6 0x0418
+#define MUX_STAT_MIF7 0x041c
+#define DIV_MIF1 0x0604
+#define DIV_MIF2 0x0608
+#define DIV_MIF3 0x060c
+#define DIV_MIF4 0x0610
+#define DIV_MIF5 0x0614
+#define DIV_MIF_PLL_FREQ_DET 0x0618
+#define DIV_STAT_MIF1 0x0704
+#define DIV_STAT_MIF2 0x0708
+#define DIV_STAT_MIF3 0x070c
+#define DIV_STAT_MIF4 0x0710
+#define DIV_STAT_MIF5 0x0714
+#define DIV_STAT_MIF_PLL_FREQ_DET 0x0718
+#define ENABLE_ACLK_MIF0 0x0800
+#define ENABLE_ACLK_MIF1 0x0804
+#define ENABLE_ACLK_MIF2 0x0808
+#define ENABLE_ACLK_MIF3 0x080c
+#define ENABLE_PCLK_MIF 0x0900
+#define ENABLE_PCLK_MIF_SECURE_DREX0_TZ 0x0904
+#define ENABLE_PCLK_MIF_SECURE_DREX1_TZ 0x0908
+#define ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT 0x090c
+#define ENABLE_PCLK_MIF_SECURE_RTC 0x0910
+#define ENABLE_SCLK_MIF 0x0a00
+#define ENABLE_IP_MIF0 0x0b00
+#define ENABLE_IP_MIF1 0x0b04
+#define ENABLE_IP_MIF2 0x0b08
+#define ENABLE_IP_MIF3 0x0b0c
+#define ENABLE_IP_MIF_SECURE_DREX0_TZ 0x0b10
+#define ENABLE_IP_MIF_SECURE_DREX1_TZ 0x0b14
+#define ENABLE_IP_MIF_SECURE_MONOTONIC_CNT 0x0b18
+#define ENABLE_IP_MIF_SECURE_RTC 0x0b1c
+#define CLKOUT_CMU_MIF 0x0c00
+#define CLKOUT_CMU_MIF_DIV_STAT 0x0c04
+#define DREX_FREQ_CTRL0 0x1000
+#define DREX_FREQ_CTRL1 0x1004
+#define PAUSE 0x1008
+#define DDRPHY_LOCK_CTRL 0x100c
static unsigned long mif_clk_regs[] __initdata = {
MEM0_PLL_LOCK,
@@ -758,6 +818,66 @@ static unsigned long mif_clk_regs[] __initdata = {
MFC_PLL_CON0,
MFC_PLL_CON1,
MFC_PLL_FREQ_DET,
+ MUX_SEL_MIF0,
+ MUX_SEL_MIF1,
+ MUX_SEL_MIF2,
+ MUX_SEL_MIF3,
+ MUX_SEL_MIF4,
+ MUX_SEL_MIF5,
+ MUX_SEL_MIF6,
+ MUX_SEL_MIF7,
+ MUX_ENABLE_MIF0,
+ MUX_ENABLE_MIF1,
+ MUX_ENABLE_MIF2,
+ MUX_ENABLE_MIF3,
+ MUX_ENABLE_MIF4,
+ MUX_ENABLE_MIF5,
+ MUX_ENABLE_MIF6,
+ MUX_ENABLE_MIF7,
+ MUX_STAT_MIF0,
+ MUX_STAT_MIF1,
+ MUX_STAT_MIF2,
+ MUX_STAT_MIF3,
+ MUX_STAT_MIF4,
+ MUX_STAT_MIF5,
+ MUX_STAT_MIF6,
+ MUX_STAT_MIF7,
+ DIV_MIF1,
+ DIV_MIF2,
+ DIV_MIF3,
+ DIV_MIF4,
+ DIV_MIF5,
+ DIV_MIF_PLL_FREQ_DET,
+ DIV_STAT_MIF1,
+ DIV_STAT_MIF2,
+ DIV_STAT_MIF3,
+ DIV_STAT_MIF4,
+ DIV_STAT_MIF5,
+ DIV_STAT_MIF_PLL_FREQ_DET,
+ ENABLE_ACLK_MIF0,
+ ENABLE_ACLK_MIF1,
+ ENABLE_ACLK_MIF2,
+ ENABLE_ACLK_MIF3,
+ ENABLE_PCLK_MIF,
+ ENABLE_PCLK_MIF_SECURE_DREX0_TZ,
+ ENABLE_PCLK_MIF_SECURE_DREX1_TZ,
+ ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT,
+ ENABLE_PCLK_MIF_SECURE_RTC,
+ ENABLE_SCLK_MIF,
+ ENABLE_IP_MIF0,
+ ENABLE_IP_MIF1,
+ ENABLE_IP_MIF2,
+ ENABLE_IP_MIF3,
+ ENABLE_IP_MIF_SECURE_DREX0_TZ,
+ ENABLE_IP_MIF_SECURE_DREX1_TZ,
+ ENABLE_IP_MIF_SECURE_MONOTONIC_CNT,
+ ENABLE_IP_MIF_SECURE_RTC,
+ CLKOUT_CMU_MIF,
+ CLKOUT_CMU_MIF_DIV_STAT,
+ DREX_FREQ_CTRL0,
+ DREX_FREQ_CTRL1,
+ PAUSE,
+ DDRPHY_LOCK_CTRL,
};
static struct samsung_pll_clock mif_pll_clks[] __initdata = {
@@ -771,9 +891,488 @@ static struct samsung_pll_clock mif_pll_clks[] __initdata = {
MFC_PLL_LOCK, MFC_PLL_CON0, exynos5443_pll_rates),
};
+/* list of all parent clock list */
+PNAME(mout_mfc_pll_div2_p) = { "mout_mfc_pll", "dout_mfc_pll", };
+PNAME(mout_bus_pll_div2_p) = { "mout_bus_pll", "dout_bus_pll", };
+PNAME(mout_mem1_pll_div2_p) = { "mout_mem1_pll", "dout_mem1_pll", };
+PNAME(mout_mem0_pll_div2_p) = { "mout_mem0_pll", "dout_mem0_pll", };
+PNAME(mout_mfc_pll_p) = { "fin_pll", "fout_mfc_pll", };
+PNAME(mout_bus_pll_p) = { "fin_pll", "fout_bus_pll", };
+PNAME(mout_mem1_pll_p) = { "fin_pll", "fout_mem1_pll", };
+PNAME(mout_mem0_pll_p) = { "fin_pll", "fout_mem0_pll", };
+
+PNAME(mout_clk2x_phy_c_p) = { "mout_mem0_pll_div2", "mout_clkm_phy_b", };
+PNAME(mout_clk2x_phy_b_p) = { "mout_bus_pll_div2", "mout_clkm_phy_a", };
+PNAME(mout_clk2x_phy_a_p) = { "mout_bus_pll_div2", "mout_mfc_pll_div2", };
+PNAME(mout_clkm_phy_b_p) = { "mout_mem1_pll_div2", "mout_clkm_phy_a", };
+
+PNAME(mout_aclk_mifnm_200_p) = { "mout_mem0_pll_div2", "div_mif_pre", };
+PNAME(mout_aclk_mifnm_400_p) = { "mout_mem1_pll_div2", "mout_bus_pll_div2",};
+
+PNAME(mout_aclk_disp_333_b_p) = { "mout_aclk_disp_333_a",
+ "mout_bus_pll_div2", };
+PNAME(mout_aclk_disp_333_a_p) = { "mout_mfc_pll_div2", "sclk_mphy_pll", };
+
+PNAME(mout_sclk_decon_vclk_c_p) = { "mout_sclk_decon_vclk_b",
+ "sclk_mphy_pll", };
+PNAME(mout_sclk_decon_vclk_b_p) = { "mout_sclk_decon_vclk_a",
+ "mout_mfc_pll_div2", };
+PNAME(mout_sclk_decon_p) = { "fin_pll", "mout_bus_pll_div2", };
+PNAME(mout_sclk_decon_eclk_c_p) = { "mout_sclk_decon_eclk_b",
+ "sclk_mphy_pll", };
+PNAME(mout_sclk_decon_eclk_b_p) = { "mout_sclk_decon_eclk_a",
+ "mout_mfc_pll_div2", };
+
+PNAME(mout_sclk_decon_tv_eclk_c_p) = { "mout_sclk_decon_tv_eclk_b",
+ "sclk_mphy_pll", };
+PNAME(mout_sclk_decon_tv_eclk_b_p) = { "mout_sclk_decon_tv_eclk_a",
+ "mout_mfc_pll_div2", };
+PNAME(mout_sclk_dsd_c_p) = { "mout_sclk_dsd_b", "mout_bus_pll_div2", };
+PNAME(mout_sclk_dsd_b_p) = { "mout_sclk_dsd_a", "sclk_mphy_pll", };
+PNAME(mout_sclk_dsd_a_p) = { "fin_pll", "mout_mfc_pll_div2", };
+
+PNAME(mout_sclk_dsim0_c_p) = { "mout_sclk_dsim0_b", "sclk_mphy_pll", };
+PNAME(mout_sclk_dsim0_b_p) = { "mout_sclk_dsim0_a", "mout_mfc_pll_div2" };
+
+PNAME(mout_sclk_decon_tv_vclk_c_p) = { "mout_sclk_decon_tv_vclk_b",
+ "sclk_mphy_pll", };
+PNAME(mout_sclk_decon_tv_vclk_b_p) = { "mout_sclk_decon_tv_vclk_a",
+ "mout_mfc_pll_div2", };
+PNAME(mout_sclk_dsim1_c_p) = { "mout_sclk_dsim1_b", "sclk_mphy_pll", };
+PNAME(mout_sclk_dsim1_b_p) = { "mout_sclk_dsim1_a", "mout_mfc_pll_div2",};
+
+static struct samsung_fixed_factor_clock mif_fixed_factor_clks[] __initdata = {
+ /* dout_{mfc|bus|mem1|mem0}_pll is half fixed rate from parent mux */
+ FFACTOR(CLK_DOUT_MFC_PLL, "dout_mfc_pll", "mout_mfc_pll", 1, 1, 0),
+ FFACTOR(CLK_DOUT_BUS_PLL, "dout_bus_pll", "mout_bus_pll", 1, 1, 0),
+ FFACTOR(CLK_DOUT_MEM1_PLL, "dout_mem1_pll", "mout_mem1_pll", 1, 1, 0),
+ FFACTOR(CLK_DOUT_MEM0_PLL, "dout_mem0_pll", "mout_mem0_pll", 1, 1, 0),
+};
+
+static struct samsung_mux_clock mif_mux_clks[] __initdata = {
+ /* MUX_SEL_MIF0 */
+ MUX(CLK_MOUT_MFC_PLL_DIV2, "mout_mfc_pll_div2", mout_mfc_pll_div2_p,
+ MUX_SEL_MIF0, 28, 1),
+ MUX(CLK_MOUT_BUS_PLL_DIV2, "mout_bus_pll_div2", mout_bus_pll_div2_p,
+ MUX_SEL_MIF0, 24, 1),
+ MUX(CLK_MOUT_MEM1_PLL_DIV2, "mout_mem1_pll_div2", mout_mem1_pll_div2_p,
+ MUX_SEL_MIF0, 20, 1),
+ MUX(CLK_MOUT_MEM0_PLL_DIV2, "mout_mem0_pll_div2", mout_mem0_pll_div2_p,
+ MUX_SEL_MIF0, 16, 1),
+ MUX(CLK_MOUT_MFC_PLL, "mout_mfc_pll", mout_mfc_pll_p, MUX_SEL_MIF0,
+ 12, 1),
+ MUX(CLK_MOUT_BUS_PLL, "mout_bus_pll", mout_bus_pll_p, MUX_SEL_MIF0,
+ 8, 1),
+ MUX(CLK_MOUT_MEM1_PLL, "mout_mem1_pll", mout_mem1_pll_p, MUX_SEL_MIF0,
+ 4, 1),
+ MUX(CLK_MOUT_MEM0_PLL, "mout_mem0_pll", mout_mem0_pll_p, MUX_SEL_MIF0,
+ 0, 1),
+
+ /* MUX_SEL_MIF1 */
+ MUX(CLK_MOUT_CLK2X_PHY_C, "mout_clk2x_phy_c", mout_clk2x_phy_c_p,
+ MUX_SEL_MIF1, 24, 1),
+ MUX(CLK_MOUT_CLK2X_PHY_B, "mout_clk2x_phy_b", mout_clk2x_phy_b_p,
+ MUX_SEL_MIF1, 20, 1),
+ MUX(CLK_MOUT_CLK2X_PHY_A, "mout_clk2x_phy_a", mout_clk2x_phy_a_p,
+ MUX_SEL_MIF1, 16, 1),
+ MUX(CLK_MOUT_CLKM_PHY_C, "mout_clkm_phy_c", mout_clk2x_phy_c_p,
+ MUX_SEL_MIF1, 12, 1),
+ MUX(CLK_MOUT_CLKM_PHY_B, "mout_clkm_phy_b", mout_clkm_phy_b_p,
+ MUX_SEL_MIF1, 8, 1),
+ MUX(CLK_MOUT_CLKM_PHY_A, "mout_clkm_phy_a", mout_clk2x_phy_a_p,
+ MUX_SEL_MIF1, 4, 1),
+
+ /* MUX_SEL_MIF2 */
+ MUX(CLK_MOUT_ACLK_MIFNM_200, "mout_aclk_mifnm_200",
+ mout_aclk_mifnm_200_p, MUX_SEL_MIF2, 8, 1),
+ MUX(CLK_MOUT_ACLK_MIFNM_400, "mout_aclk_mifnm_400",
+ mout_aclk_mifnm_400_p, MUX_SEL_MIF2, 0, 1),
+
+ /* MUX_SEL_MIF3 */
+ MUX(CLK_MOUT_ACLK_DISP_333_B, "mout_aclk_disp_333_b",
+ mout_aclk_disp_333_b_p, MUX_SEL_MIF3, 4, 1),
+ MUX(CLK_MOUT_ACLK_DISP_333_A, "mout_aclk_disp_333_a",
+ mout_aclk_disp_333_a_p, MUX_SEL_MIF3, 0, 1),
+
+ /* MUX_SEL_MIF4 */
+ MUX(CLK_MOUT_SCLK_DECON_VCLK_C, "mout_sclk_decon_vclk_c",
+ mout_sclk_decon_vclk_c_p, MUX_SEL_MIF4, 24, 1),
+ MUX(CLK_MOUT_SCLK_DECON_VCLK_B, "mout_sclk_decon_vclk_b",
+ mout_sclk_decon_vclk_b_p, MUX_SEL_MIF4, 20, 1),
+ MUX(CLK_MOUT_SCLK_DECON_VCLK_A, "mout_sclk_decon_vclk_a",
+ mout_sclk_decon_p, MUX_SEL_MIF4, 16, 1),
+ MUX(CLK_MOUT_SCLK_DECON_ECLK_C, "mout_sclk_decon_eclk_c",
+ mout_sclk_decon_eclk_c_p, MUX_SEL_MIF4, 8, 1),
+ MUX(CLK_MOUT_SCLK_DECON_ECLK_B, "mout_sclk_decon_eclk_b",
+ mout_sclk_decon_eclk_b_p, MUX_SEL_MIF4, 4, 1),
+ MUX(CLK_MOUT_SCLK_DECON_ECLK_A, "mout_sclk_decon_eclk_a",
+ mout_sclk_decon_p, MUX_SEL_MIF4, 0, 1),
+
+ /* MUX_SEL_MIF5 */
+ MUX(CLK_MOUT_SCLK_DECON_TV_ECLK_C, "mout_sclk_decon_tv_eclk_c",
+ mout_sclk_decon_tv_eclk_c_p, MUX_SEL_MIF5, 24, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_ECLK_B, "mout_sclk_decon_tv_eclk_b",
+ mout_sclk_decon_tv_eclk_b_p, MUX_SEL_MIF5, 20, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_ECLK_A, "mout_sclk_decon_tv_eclk_a",
+ mout_sclk_decon_p, MUX_SEL_MIF5, 16, 1),
+ MUX(CLK_MOUT_SCLK_DSD_C, "mout_sclk_dsd_c", mout_sclk_dsd_c_p,
+ MUX_SEL_MIF5, 8, 1),
+ MUX(CLK_MOUT_SCLK_DSD_B, "mout_sclk_dsd_b", mout_sclk_dsd_b_p,
+ MUX_SEL_MIF5, 4, 1),
+ MUX(CLK_MOUT_SCLK_DSD_A, "mout_sclk_dsd_a", mout_sclk_dsd_a_p,
+ MUX_SEL_MIF5, 0, 1),
+
+ /* MUX_SEL_MIF6 */
+ MUX(CLK_MOUT_SCLK_DSIM0_C, "mout_sclk_dsim0_c", mout_sclk_dsim0_c_p,
+ MUX_SEL_MIF6, 8, 1),
+ MUX(CLK_MOUT_SCLK_DSIM0_B, "mout_sclk_dsim0_b", mout_sclk_dsim0_b_p,
+ MUX_SEL_MIF6, 4, 1),
+ MUX(CLK_MOUT_SCLK_DSIM0_A, "mout_sclk_dsim0_a", mout_sclk_decon_p,
+ MUX_SEL_MIF6, 0, 1),
+
+ /* MUX_SEL_MIF7 */
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_C, "mout_sclk_decon_tv_vclk_c",
+ mout_sclk_decon_tv_vclk_c_p, MUX_SEL_MIF7, 24, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_B, "mout_sclk_decon_tv_vclk_b",
+ mout_sclk_decon_tv_vclk_b_p, MUX_SEL_MIF7, 20, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_A, "mout_sclk_decon_tv_vclk_a",
+ mout_sclk_decon_p, MUX_SEL_MIF7, 16, 1),
+ MUX(CLK_MOUT_SCLK_DSIM1_C, "mout_sclk_dsim1_c", mout_sclk_dsim1_c_p,
+ MUX_SEL_MIF7, 8, 1),
+ MUX(CLK_MOUT_SCLK_DSIM1_B, "mout_sclk_dsim1_b", mout_sclk_dsim1_b_p,
+ MUX_SEL_MIF7, 4, 1),
+ MUX(CLK_MOUT_SCLK_DSIM1_A, "mout_sclk_dsim1_a", mout_sclk_decon_p,
+ MUX_SEL_MIF7, 0, 1),
+};
+
+static struct samsung_div_clock mif_div_clks[] __initdata = {
+ /* DIV_MIF1 */
+ DIV(CLK_DIV_SCLK_HPM_MIF, "div_sclk_hpm_mif", "div_clk2x_phy",
+ DIV_MIF1, 16, 2),
+ DIV(CLK_DIV_ACLK_DREX1, "div_aclk_drex1", "div_clk2x_phy", DIV_MIF1,
+ 12, 2),
+ DIV(CLK_DIV_ACLK_DREX0, "div_aclk_drex0", "div_clk2x_phy", DIV_MIF1,
+ 8, 2),
+ DIV(CLK_DIV_CLK2XPHY, "div_clk2x_phy", "mout_clk2x_phy_c", DIV_MIF1,
+ 4, 4),
+
+ /* DIV_MIF2 */
+ DIV(CLK_DIV_ACLK_MIF_266, "div_aclk_mif_266", "mout_bus_pll_div2",
+ DIV_MIF2, 20, 3),
+ DIV(CLK_DIV_ACLK_MIFND_133, "div_aclk_mifnd_133", "div_mif_pre",
+ DIV_MIF2, 16, 4),
+ DIV(CLK_DIV_ACLK_MIF_133, "div_aclk_mif_133", "div_mif_pre",
+ DIV_MIF2, 12, 4),
+ DIV(CLK_DIV_ACLK_MIFNM_200, "div_aclk_mifnm_200",
+ "mout_aclk_mifnm_200", DIV_MIF2, 8, 3),
+ DIV(CLK_DIV_ACLK_MIF_200, "div_aclk_mif_200", "div_aclk_mif_400",
+ DIV_MIF2, 4, 2),
+ DIV(CLK_DIV_ACLK_MIF_400, "div_aclk_mif_400", "mout_aclk_mifnm_400",
+ DIV_MIF2, 0, 3),
+
+ /* DIV_MIF3 */
+ DIV(CLK_DIV_ACLK_BUS2_400, "div_aclk_bus2_400", "div_mif_pre",
+ DIV_MIF3, 16, 4),
+ DIV(CLK_DIV_ACLK_DISP_333, "div_aclk_disp_333", "mout_aclk_disp_333_b",
+ DIV_MIF3, 4, 3),
+ DIV(CLK_DIV_ACLK_CPIF_200, "div_aclk_cpif_200", "mout_aclk_mifnm_200",
+ DIV_MIF3, 0, 3),
+
+ /* DIV_MIF4 */
+ DIV(CLK_DIV_SCLK_DSIM1, "div_sclk_dsim1", "mout_sclk_dsim1_c",
+ DIV_MIF4, 24, 4),
+ DIV(CLK_DIV_SCLK_DECON_TV_VCLK, "div_sclk_decon_tv_vclk",
+ "mout_sclk_decon_tv_vclk_c", DIV_MIF4, 20, 4),
+ DIV(CLK_DIV_SCLK_DSIM0, "div_sclk_dsim0", "mout_sclk_dsim0_c",
+ DIV_MIF4, 16, 4),
+ DIV(CLK_DIV_SCLK_DSD, "div_sclk_dsd", "mout_sclk_dsd_c",
+ DIV_MIF4, 12, 4),
+ DIV(CLK_DIV_SCLK_DECON_TV_ECLK, "div_sclk_decon_tv_eclk",
+ "mout_sclk_decon_tv_eclk_c", DIV_MIF4, 8, 4),
+ DIV(CLK_DIV_SCLK_DECON_VCLK, "div_sclk_decon_vclk",
+ "mout_sclk_decon_vclk_c", DIV_MIF4, 4, 4),
+ DIV(CLK_DIV_SCLK_DECON_ECLK, "div_sclk_decon_eclk",
+ "mout_sclk_decon_eclk_c", DIV_MIF4, 0, 4),
+
+ /* DIV_MIF5 */
+ DIV(CLK_DIV_MIF_PRE, "div_mif_pre", "mout_bus_pll_div2", DIV_MIF5,
+ 0, 3),
+};
+
+static struct samsung_gate_clock mif_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_MIF0 */
+ GATE(CLK_CLK2X_PHY1, "clk2k_phy1", "div_clk2x_phy", ENABLE_ACLK_MIF0,
+ 19, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CLK2X_PHY0, "clk2x_phy0", "div_clk2x_phy", ENABLE_ACLK_MIF0,
+ 18, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CLKM_PHY1, "clkm_phy1", "mout_clkm_phy_c", ENABLE_ACLK_MIF0,
+ 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CLKM_PHY0, "clkm_phy0", "mout_clkm_phy_c", ENABLE_ACLK_MIF0,
+ 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_RCLK_DREX1, "rclk_drex1", "fin_pll", ENABLE_ACLK_MIF0,
+ 15, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_RCLK_DREX0, "rclk_drex0", "fin_pll", ENABLE_ACLK_MIF0,
+ 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1_TZ, "aclk_drex1_tz", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0_TZ, "aclk_drex0_tz", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1_PEREV, "aclk_drex1_perev", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 11, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0_PEREV, "aclk_drex0_perev", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 10, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1_MEMIF, "aclk_drex1_memif", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0_MEMIF, "aclk_drex0_memif", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1_SCH, "aclk_drex1_sch", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 7, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0_SCH, "aclk_drex0_sch", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1_BUSIF, "aclk_drex1_busif", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0_BUSIF, "aclk_drex0_busif", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1_BUSIF_RD, "aclk_drex1_busif_rd", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0_BUSIF_RD, "aclk_drex0_busif_rd", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX1, "aclk_drex1", "div_aclk_drex1",
+ ENABLE_ACLK_MIF0, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DREX0, "aclk_drex0", "div_aclk_drex0",
+ ENABLE_ACLK_MIF0, 1, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_ACLK_MIF1 */
+ GATE(CLK_ACLK_ASYNCAXIS_MIF_IMEM, "aclk_asyncaxis_mif_imem",
+ "div_aclk_mif_200", ENABLE_ACLK_MIF1, 28,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_NOC_P_CCI, "aclk_asyncaxis_noc_p_cci",
+ "div_aclk_mif_200", ENABLE_ACLK_MIF1,
+ 27, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_NOC_P_CCI, "aclk_asyncaxim_noc_p_cci",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 26, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_CP1, "aclk_asyncaxis_cp1",
+ "div_aclk_mifnm_200", ENABLE_ACLK_MIF1,
+ 25, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_CP1, "aclk_asyncaxim_cp1",
+ "div_aclk_drex1", ENABLE_ACLK_MIF1,
+ 24, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_CP0, "aclk_asyncaxis_cp0",
+ "div_aclk_mifnm_200", ENABLE_ACLK_MIF1,
+ 23, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_CP0, "aclk_asyncaxim_cp0",
+ "div_aclk_drex0", ENABLE_ACLK_MIF1,
+ 22, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_DREX1_3, "aclk_asyncaxis_drex1_3",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 21, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_DREX1_3, "aclk_asyncaxim_drex1_3",
+ "div_aclk_drex1", ENABLE_ACLK_MIF1,
+ 20, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_DREX1_1, "aclk_asyncaxis_drex1_1",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 19, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_DREX1_1, "aclk_asyncaxim_drex1_1",
+ "div_aclk_drex1", ENABLE_ACLK_MIF1,
+ 18, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_DREX1_0, "aclk_asyncaxis_drex1_0",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_DREX1_0, "aclk_asyncaxim_drex1_0",
+ "div_aclk_drex1", ENABLE_ACLK_MIF1,
+ 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_DREX0_3, "aclk_asyncaxis_drex0_3",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 15, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_DREX0_3, "aclk_asyncaxim_drex0_3",
+ "div_aclk_drex0", ENABLE_ACLK_MIF1,
+ 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_DREX0_1, "aclk_asyncaxis_drex0_1",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_DREX0_1, "aclk_asyncaxim_drex0_1",
+ "div_aclk_drex0", ENABLE_ACLK_MIF1,
+ 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIS_DREX0_0, "aclk_asyncaxis_drex0_0",
+ "div_aclk_mif_133", ENABLE_ACLK_MIF1,
+ 11, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAXIM_DREX0_0, "aclk_asyncaxim_drex0_0",
+ "div_aclk_drex0", ENABLE_ACLK_MIF1,
+ 10, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_MIF2P, "aclk_ahb2apb_mif2p", "div_aclk_mif_133",
+ ENABLE_ACLK_MIF1, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_MIF1P, "aclk_ahb2apb_mif1p", "div_aclk_mif_133",
+ ENABLE_ACLK_MIF1, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_MIF0P, "aclk_ahb2apb_mif0p", "div_aclk_mif_133",
+ ENABLE_ACLK_MIF1, 7, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_IXIU_CCI, "aclk_ixiu_cci", "div_aclk_mif_400",
+ ENABLE_ACLK_MIF1, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_MIFSFRX, "aclk_xiu_mifsfrx", "div_aclk_mif_200",
+ ENABLE_ACLK_MIF1, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MIFNP_133, "aclk_mifnp_133", "div_aclk_mif_133",
+ ENABLE_ACLK_MIF1, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MIFNM_200, "aclk_mifnm_200", "div_aclk_mifnm_200",
+ ENABLE_ACLK_MIF1, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MIFND_133, "aclk_mifnd_133", "div_aclk_mifnd_133",
+ ENABLE_ACLK_MIF1, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_MIFND_400, "aclk_mifnd_400", "div_aclk_mif_400",
+ ENABLE_ACLK_MIF1, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_CCI, "aclk_cci", "div_aclk_mif_400", ENABLE_ACLK_MIF1,
+ 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_ACLK_MIF2 */
+ GATE(CLK_ACLK_MIFND_266, "aclk_mifnd_266", "div_aclk_mif_266",
+ ENABLE_ACLK_MIF2, 20, 0, 0),
+ GATE(CLK_ACLK_PPMU_DREX1S3, "aclk_ppmu_drex1s3", "div_aclk_drex1",
+ ENABLE_ACLK_MIF2, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX1S1, "aclk_ppmu_drex1s1", "div_aclk_drex1",
+ ENABLE_ACLK_MIF2, 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX1S0, "aclk_ppmu_drex1s0", "div_aclk_drex1",
+ ENABLE_ACLK_MIF2, 15, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX0S3, "aclk_ppmu_drex0s3", "div_aclk_drex0",
+ ENABLE_ACLK_MIF2, 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX0S1, "aclk_ppmu_drex0s1", "div_aclk_drex0",
+ ENABLE_ACLK_MIF2, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_PPMU_DREX0S0, "aclk_ppmu_drex0s0", "div_aclk_drex0",
+ ENABLE_ACLK_MIF2, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AXIDS_CCI_MIFSFRX, "aclk_axids_cci_mifsfrx",
+ "div_aclk_mif_200", ENABLE_ACLK_MIF2, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AXISYNCDNS_CCI, "aclk_axisyncdns_cci",
+ "div_aclk_mif_400", ENABLE_ACLK_MIF2,
+ 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AXISYNCDN_CCI, "aclk_axisyncdn_cci", "div_aclk_mif_400",
+ ENABLE_ACLK_MIF2, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AXISYNCDN_NOC_D, "aclk_axisyncdn_noc_d",
+ "div_aclk_mif_200", ENABLE_ACLK_MIF2,
+ 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_ASYNCAPBS_MIF_CSSYS, "aclk_asyncapbs_mif_cssys",
+ "div_aclk_mifnd_133", ENABLE_ACLK_MIF2, 0, 0, 0),
+
+ /* ENABLE_ACLK_MIF3 */
+ GATE(CLK_ACLK_BUS2_400, "aclk_bus2_400", "div_aclk_bus2_400",
+ ENABLE_ACLK_MIF3, 4,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_ACLK_DISP_333, "aclk_disp_333", "div_aclk_disp_333",
+ ENABLE_ACLK_MIF3, 1,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_ACLK_CPIF_200, "aclk_cpif_200", "div_aclk_cpif_200",
+ ENABLE_ACLK_MIF3, 0,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+
+ /* ENABLE_PCLK_MIF */
+ GATE(CLK_PCLK_PPMU_DREX1S3, "pclk_ppmu_drex1s3", "div_aclk_drex1",
+ ENABLE_PCLK_MIF, 29, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX1S1, "pclk_ppmu_drex1s1", "div_aclk_drex1",
+ ENABLE_PCLK_MIF, 28, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX1S0, "pclk_ppmu_drex1s0", "div_aclk_drex1",
+ ENABLE_PCLK_MIF, 27, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX0S3, "pclk_ppmu_drex0s3", "div_aclk_drex0",
+ ENABLE_PCLK_MIF, 26, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX0S1, "pclk_ppmu_drex0s1", "div_aclk_drex0",
+ ENABLE_PCLK_MIF, 25, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PPMU_DREX0S0, "pclk_ppmu_drex0s0", "div_aclk_drex0",
+ ENABLE_PCLK_MIF, 24, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_ASYNCAXI_NOC_P_CCI, "pclk_asyncaxi_noc_p_cci",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_ASYNCAXI_CP1, "pclk_asyncaxi_cp1", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 19, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_CP0, "pclk_asyncaxi_cp0", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 18, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_DREX1_3, "pclk_asyncaxi_drex1_3",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 17, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_DREX1_1, "pclk_asyncaxi_drex1_1",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 16, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_DREX1_0, "pclk_asyncaxi_drex1_0",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 15, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_DREX0_3, "pclk_asyncaxi_drex0_3",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 14, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_DREX0_1, "pclk_asyncaxi_drex0_1",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 13, 0, 0),
+ GATE(CLK_PCLK_ASYNCAXI_DREX0_0, "pclk_asyncaxi_drex0_0",
+ "div_aclk_mif_133", ENABLE_PCLK_MIF, 12, 0, 0),
+ GATE(CLK_PCLK_MIFSRVND_133, "pclk_mifsrvnd_133", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 11, 0, 0),
+ GATE(CLK_PCLK_PMU_MIF, "pclk_pmu_mif", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 10, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_MIF, "pclk_sysreg_mif", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_GPIO_ALIVE, "pclk_gpio_alive", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_ABB, "pclk_abb", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 7, 0, 0),
+ GATE(CLK_PCLK_PMU_APBIF, "pclk_pmu_apbif", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_DDR_PHY1, "pclk_ddr_phy1", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 5, 0, 0),
+ GATE(CLK_PCLK_DREX1, "pclk_drex1", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_DDR_PHY0, "pclk_ddr_phy0", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 2, 0, 0),
+ GATE(CLK_PCLK_DREX0, "pclk_drex0", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_MIF_SECURE_DREX0_TZ */
+ GATE(CLK_PCLK_DREX0_TZ, "pclk_drex0_tz", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF_SECURE_DREX0_TZ, 0, 0, 0),
+
+ /* ENABLE_PCLK_MIF_SECURE_DREX1_TZ */
+ GATE(CLK_PCLK_DREX1_TZ, "pclk_drex1_tz", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF_SECURE_DREX1_TZ, 0, 0, 0),
+
+ /* ENABLE_PCLK_MIF_SECURE_MONOTONIC_CNT */
+ GATE(CLK_PCLK_MONOTONIC_CNT, "pclk_monotonic_cnt", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF_SECURE_RTC, 0, 0, 0),
+
+ /* ENABLE_PCLK_MIF_SECURE_RTC */
+ GATE(CLK_PCLK_RTC, "pclk_rtc", "div_aclk_mif_133",
+ ENABLE_PCLK_MIF_SECURE_RTC, 0, 0, 0),
+
+ /* ENABLE_SCLK_MIF */
+ GATE(CLK_SCLK_DSIM1_DISP, "sclk_dsim1_disp", "div_sclk_dsim1",
+ ENABLE_SCLK_MIF, 15, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_DECON_TV_VCLK_DISP, "sclk_decon_tv_vclk_disp",
+ "div_sclk_decon_tv_vclk", ENABLE_SCLK_MIF,
+ 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_DSIM0_DISP, "sclk_dsim0_disp", "div_sclk_dsim0",
+ ENABLE_SCLK_MIF, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_DSD_DISP, "sclk_dsd_disp", "div_sclk_dsd",
+ ENABLE_SCLK_MIF, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_DECON_TV_ECLK_DISP, "sclk_decon_tv_eclk_disp",
+ "div_sclk_decon_tv_eclk", ENABLE_SCLK_MIF,
+ 7, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_DECON_VCLK_DISP, "sclk_decon_vclk_disp",
+ "div_sclk_decon_vclk", ENABLE_SCLK_MIF,
+ 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_DECON_ECLK_DISP, "sclk_decon_eclk_disp",
+ "div_sclk_decon_eclk", ENABLE_SCLK_MIF,
+ 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_HPM_MIF, "sclk_hpm_mif", "div_sclk_hpm_mif",
+ ENABLE_SCLK_MIF, 4,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MFC_PLL, "sclk_mfc_pll", "mout_mfc_pll_div2",
+ ENABLE_SCLK_MIF, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_BUS_PLL, "sclk_bus_pll", "mout_bus_pll_div2",
+ ENABLE_SCLK_MIF, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_BUS_PLL_APOLLO, "sclk_bus_pll_apollo", "sclk_bus_pll",
+ ENABLE_SCLK_MIF, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_BUS_PLL_ATLAS, "sclk_bus_pll_atlas", "sclk_bus_pll",
+ ENABLE_SCLK_MIF, 0, CLK_IGNORE_UNUSED, 0),
+};
+
static struct samsung_cmu_info mif_cmu_info __initdata = {
.pll_clks = mif_pll_clks,
.nr_pll_clks = ARRAY_SIZE(mif_pll_clks),
+ .mux_clks = mif_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(mif_mux_clks),
+ .div_clks = mif_div_clks,
+ .nr_div_clks = ARRAY_SIZE(mif_div_clks),
+ .gate_clks = mif_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(mif_gate_clks),
+ .fixed_factor_clks = mif_fixed_factor_clks,
+ .nr_fixed_factor_clks = ARRAY_SIZE(mif_fixed_factor_clks),
.nr_clk_ids = MIF_NR_CLK,
.clk_regs = mif_clk_regs,
.nr_clk_regs = ARRAY_SIZE(mif_clk_regs),
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 8e423a6..cb0e84e 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -149,8 +149,196 @@
#define CLK_FOUT_MEM1_PLL 2
#define CLK_FOUT_BUS_PLL 3
#define CLK_FOUT_MFC_PLL 4
+#define CLK_DOUT_MFC_PLL 5
+#define CLK_DOUT_BUS_PLL 6
+#define CLK_DOUT_MEM1_PLL 7
+#define CLK_DOUT_MEM0_PLL 8
-#define MIF_NR_CLK 5
+#define CLK_MOUT_MFC_PLL_DIV2 10
+#define CLK_MOUT_BUS_PLL_DIV2 11
+#define CLK_MOUT_MEM1_PLL_DIV2 12
+#define CLK_MOUT_MEM0_PLL_DIV2 13
+#define CLK_MOUT_MFC_PLL 14
+#define CLK_MOUT_BUS_PLL 15
+#define CLK_MOUT_MEM1_PLL 16
+#define CLK_MOUT_MEM0_PLL 17
+#define CLK_MOUT_CLK2X_PHY_C 18
+#define CLK_MOUT_CLK2X_PHY_B 19
+#define CLK_MOUT_CLK2X_PHY_A 20
+#define CLK_MOUT_CLKM_PHY_C 21
+#define CLK_MOUT_CLKM_PHY_B 22
+#define CLK_MOUT_CLKM_PHY_A 23
+#define CLK_MOUT_ACLK_MIFNM_200 24
+#define CLK_MOUT_ACLK_MIFNM_400 25
+#define CLK_MOUT_ACLK_DISP_333_B 26
+#define CLK_MOUT_ACLK_DISP_333_A 27
+#define CLK_MOUT_SCLK_DECON_VCLK_C 28
+#define CLK_MOUT_SCLK_DECON_VCLK_B 29
+#define CLK_MOUT_SCLK_DECON_VCLK_A 30
+#define CLK_MOUT_SCLK_DECON_ECLK_C 31
+#define CLK_MOUT_SCLK_DECON_ECLK_B 32
+#define CLK_MOUT_SCLK_DECON_ECLK_A 33
+#define CLK_MOUT_SCLK_DECON_TV_ECLK_C 34
+#define CLK_MOUT_SCLK_DECON_TV_ECLK_B 35
+#define CLK_MOUT_SCLK_DECON_TV_ECLK_A 36
+#define CLK_MOUT_SCLK_DSD_C 37
+#define CLK_MOUT_SCLK_DSD_B 38
+#define CLK_MOUT_SCLK_DSD_A 39
+#define CLK_MOUT_SCLK_DSIM0_C 40
+#define CLK_MOUT_SCLK_DSIM0_B 41
+#define CLK_MOUT_SCLK_DSIM0_A 42
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_C 46
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_B 47
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_A 48
+#define CLK_MOUT_SCLK_DSIM1_C 49
+#define CLK_MOUT_SCLK_DSIM1_B 50
+#define CLK_MOUT_SCLK_DSIM1_A 51
+
+#define CLK_DIV_SCLK_HPM_MIF 55
+#define CLK_DIV_ACLK_DREX1 56
+#define CLK_DIV_ACLK_DREX0 57
+#define CLK_DIV_CLK2XPHY 58
+#define CLK_DIV_ACLK_MIF_266 59
+#define CLK_DIV_ACLK_MIFND_133 60
+#define CLK_DIV_ACLK_MIF_133 61
+#define CLK_DIV_ACLK_MIFNM_200 62
+#define CLK_DIV_ACLK_MIF_200 63
+#define CLK_DIV_ACLK_MIF_400 64
+#define CLK_DIV_ACLK_BUS2_400 65
+#define CLK_DIV_ACLK_DISP_333 66
+#define CLK_DIV_ACLK_CPIF_200 67
+#define CLK_DIV_SCLK_DSIM1 68
+#define CLK_DIV_SCLK_DECON_TV_VCLK 69
+#define CLK_DIV_SCLK_DSIM0 70
+#define CLK_DIV_SCLK_DSD 71
+#define CLK_DIV_SCLK_DECON_TV_ECLK 72
+#define CLK_DIV_SCLK_DECON_VCLK 73
+#define CLK_DIV_SCLK_DECON_ECLK 74
+#define CLK_DIV_MIF_PRE 75
+
+#define CLK_CLK2X_PHY1 80
+#define CLK_CLK2X_PHY0 81
+#define CLK_CLKM_PHY1 82
+#define CLK_CLKM_PHY0 83
+#define CLK_RCLK_DREX1 84
+#define CLK_RCLK_DREX0 85
+#define CLK_ACLK_DREX1_TZ 86
+#define CLK_ACLK_DREX0_TZ 87
+#define CLK_ACLK_DREX1_PEREV 88
+#define CLK_ACLK_DREX0_PEREV 89
+#define CLK_ACLK_DREX1_MEMIF 90
+#define CLK_ACLK_DREX0_MEMIF 91
+#define CLK_ACLK_DREX1_SCH 92
+#define CLK_ACLK_DREX0_SCH 93
+#define CLK_ACLK_DREX1_BUSIF 94
+#define CLK_ACLK_DREX0_BUSIF 95
+#define CLK_ACLK_DREX1_BUSIF_RD 96
+#define CLK_ACLK_DREX0_BUSIF_RD 97
+#define CLK_ACLK_DREX1 98
+#define CLK_ACLK_DREX0 99
+#define CLK_ACLK_ASYNCAXIM_ATLAS_CCIX 100
+#define CLK_ACLK_ASYNCAXIS_ATLAS_MIF 101
+#define CLK_ACLK_ASYNCAXIM_ATLAS_MIF 102
+#define CLK_ACLK_ASYNCAXIS_MIF_IMEM 103
+#define CLK_ACLK_ASYNCAXIS_NOC_P_CCI 104
+#define CLK_ACLK_ASYNCAXIM_NOC_P_CCI 105
+#define CLK_ACLK_ASYNCAXIS_CP1 106
+#define CLK_ACLK_ASYNCAXIM_CP1 107
+#define CLK_ACLK_ASYNCAXIS_CP0 108
+#define CLK_ACLK_ASYNCAXIM_CP0 109
+#define CLK_ACLK_ASYNCAXIS_DREX1_3 110
+#define CLK_ACLK_ASYNCAXIM_DREX1_3 111
+#define CLK_ACLK_ASYNCAXIS_DREX1_1 112
+#define CLK_ACLK_ASYNCAXIM_DREX1_1 113
+#define CLK_ACLK_ASYNCAXIS_DREX1_0 114
+#define CLK_ACLK_ASYNCAXIM_DREX1_0 115
+#define CLK_ACLK_ASYNCAXIS_DREX0_3 116
+#define CLK_ACLK_ASYNCAXIM_DREX0_3 117
+#define CLK_ACLK_ASYNCAXIS_DREX0_1 118
+#define CLK_ACLK_ASYNCAXIM_DREX0_1 119
+#define CLK_ACLK_ASYNCAXIS_DREX0_0 120
+#define CLK_ACLK_ASYNCAXIM_DREX0_0 121
+#define CLK_ACLK_AHB2APB_MIF2P 122
+#define CLK_ACLK_AHB2APB_MIF1P 123
+#define CLK_ACLK_AHB2APB_MIF0P 124
+#define CLK_ACLK_IXIU_CCI 125
+#define CLK_ACLK_XIU_MIFSFRX 126
+#define CLK_ACLK_MIFNP_133 127
+#define CLK_ACLK_MIFNM_200 128
+#define CLK_ACLK_MIFND_133 129
+#define CLK_ACLK_MIFND_400 130
+#define CLK_ACLK_CCI 131
+#define CLK_ACLK_MIFND_266 132
+#define CLK_ACLK_PPMU_DREX1S3 133
+#define CLK_ACLK_PPMU_DREX1S1 134
+#define CLK_ACLK_PPMU_DREX1S0 135
+#define CLK_ACLK_PPMU_DREX0S3 136
+#define CLK_ACLK_PPMU_DREX0S1 137
+#define CLK_ACLK_PPMU_DREX0S0 138
+#define CLK_ACLK_BTS_APOLLO 139
+#define CLK_ACLK_BTS_ATLAS 140
+#define CLK_ACLK_ACE_SEL_APOLL 141
+#define CLK_ACLK_ACE_SEL_ATLAS 142
+#define CLK_ACLK_AXIDS_CCI_MIFSFRX 143
+#define CLK_ACLK_AXIUS_ATLAS_CCI 144
+#define CLK_ACLK_AXISYNCDNS_CCI 145
+#define CLK_ACLK_AXISYNCDN_CCI 146
+#define CLK_ACLK_AXISYNCDN_NOC_D 147
+#define CLK_ACLK_ASYNCACEM_APOLLO_CCI 148
+#define CLK_ACLK_ASYNCACEM_ATLAS_CCI 149
+#define CLK_ACLK_ASYNCAPBS_MIF_CSSYS 150
+#define CLK_ACLK_BUS2_400 151
+#define CLK_ACLK_DISP_333 152
+#define CLK_ACLK_CPIF_200 153
+#define CLK_PCLK_PPMU_DREX1S3 154
+#define CLK_PCLK_PPMU_DREX1S1 155
+#define CLK_PCLK_PPMU_DREX1S0 156
+#define CLK_PCLK_PPMU_DREX0S3 157
+#define CLK_PCLK_PPMU_DREX0S1 158
+#define CLK_PCLK_PPMU_DREX0S0 159
+#define CLK_PCLK_BTS_APOLLO 160
+#define CLK_PCLK_BTS_ATLAS 161
+#define CLK_PCLK_ASYNCAXI_NOC_P_CCI 162
+#define CLK_PCLK_ASYNCAXI_CP1 163
+#define CLK_PCLK_ASYNCAXI_CP0 164
+#define CLK_PCLK_ASYNCAXI_DREX1_3 165
+#define CLK_PCLK_ASYNCAXI_DREX1_1 166
+#define CLK_PCLK_ASYNCAXI_DREX1_0 167
+#define CLK_PCLK_ASYNCAXI_DREX0_3 168
+#define CLK_PCLK_ASYNCAXI_DREX0_1 169
+#define CLK_PCLK_ASYNCAXI_DREX0_0 170
+#define CLK_PCLK_MIFSRVND_133 171
+#define CLK_PCLK_PMU_MIF 172
+#define CLK_PCLK_SYSREG_MIF 173
+#define CLK_PCLK_GPIO_ALIVE 174
+#define CLK_PCLK_ABB 175
+#define CLK_PCLK_PMU_APBIF 176
+#define CLK_PCLK_DDR_PHY1 177
+#define CLK_PCLK_DREX1 178
+#define CLK_PCLK_DDR_PHY0 179
+#define CLK_PCLK_DREX0 180
+#define CLK_PCLK_DREX0_TZ 181
+#define CLK_PCLK_DREX1_TZ 182
+#define CLK_PCLK_MONOTONIC_CNT 183
+#define CLK_PCLK_RTC 184
+#define CLK_SCLK_DSIM1_DISP 185
+#define CLK_SCLK_DECON_TV_VCLK_DISP 186
+#define CLK_SCLK_FREQ_DET_BUS_PLL 187
+#define CLK_SCLK_FREQ_DET_MFC_PLL 188
+#define CLK_SCLK_FREQ_DET_MEM0_PLL 189
+#define CLK_SCLK_FREQ_DET_MEM1_PLL 190
+#define CLK_SCLK_DSIM0_DISP 191
+#define CLK_SCLK_DSD_DISP 192
+#define CLK_SCLK_DECON_TV_ECLK_DISP 193
+#define CLK_SCLK_DECON_VCLK_DISP 194
+#define CLK_SCLK_DECON_ECLK_DISP 195
+#define CLK_SCLK_HPM_MIF 196
+#define CLK_SCLK_MFC_PLL 197
+#define CLK_SCLK_BUS_PLL 198
+#define CLK_SCLK_BUS_PLL_APOLLO 199
+#define CLK_SCLK_BUS_PLL_ATLAS 200
+
+#define MIF_NR_CLK 201
/* CMU_PERIC */
#define CLK_PCLK_SPI2 1
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 07/12] clk: samsung: exynos5433: Add clocks for CMU_DISP domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (5 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 06/12] clk: samsung: exynos5433: Add clocks for CMU_MIF domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 08/12] clk: samsung: exynos5433: Add clocks for CMU_AUD domain Chanwoo Choi
` (4 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the the mux/divider/gate clocks for CMU_DISP domain which
includes the clocks of Display IPs (DECON/HDMI/DSIM/MIXER). The CMU_DISP clocks
is used to need the source clock of CMU_MIF domain so, the CMU_MIF's clocks
related to CMU_DISP should be always on state.
Also, CMU_DISP must need the source clock of 'sclk_hdmi_spdif_disp'
from CMU_TOP domain. This patch adds the clocks of CMU_TOP related to HDMI.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 9 +
drivers/clk/samsung/clk-exynos5433.c | 437 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 114 +++++-
3 files changed, 559 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 27dd77b..8d3dad4 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -21,6 +21,8 @@ Required Properties:
which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
- "samsung,exynos5433-cmu-g2d" - clock controller compatible for CMU_G2D
which generates clocks for G2D/MDMA IPs.
+ - "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP
+ which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -78,6 +80,13 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_disp: clock-controller@0x13b90000 {
+ compatible = "samsung,exynos5433-cmu-disp";
+ reg = <0x13b90000 0x0c04>;
+ #clock-cells = <1>;
+ };
+
+
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 7e33c68..3a3e64b 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -245,6 +245,8 @@ PNAME(mout_sclk_audio1_p) = { "ioclk_audiocdclk1", "fin_pll",
PNAME(mout_sclk_audio0_p) = { "ioclk_audiocdclk0", "fin_pll",
"mout_aud_pll_user_t",};
+PNAME(mout_sclk_hdmi_spdif_p) = { "sclk_audio1", "ioclk_spdif_extclk", };
+
static struct samsung_fixed_factor_clock top_fixed_factor_clks[] __initdata = {
FFACTOR(0, "oscclk_efuse_common", "fin_pll", 1, 1, 0),
};
@@ -395,6 +397,10 @@ static struct samsung_mux_clock top_mux_clks[] __initdata = {
MUX_SEL_TOP_PERIC1, 4, 2),
MUX(CLK_MOUT_SCLK_AUDIO0, "mout_sclk_audio0", mout_sclk_audio0_p,
MUX_SEL_TOP_PERIC1, 0, 2),
+
+ /* MUX_SEL_TOP_DISP */
+ MUX(CLK_MOUT_SCLK_HDMI_SPDIF, "mout_sclk_hdmi_spdif",
+ mout_sclk_hdmi_spdif_p, MUX_SEL_TOP_DISP, 0, 1),
};
static struct samsung_div_clock top_div_clks[] __initdata = {
@@ -1360,6 +1366,11 @@ static struct samsung_gate_clock mif_gate_clks[] __initdata = {
ENABLE_SCLK_MIF, 1, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SCLK_BUS_PLL_ATLAS, "sclk_bus_pll_atlas", "sclk_bus_pll",
ENABLE_SCLK_MIF, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_SCLK_TOP_DISP */
+ GATE(CLK_SCLK_HDMI_SPDIF_DISP, "sclk_hdmi_spdif_disp",
+ "mout_sclk_hdmi_spdif", ENABLE_SCLK_TOP_DISP, 0,
+ CLK_IGNORE_UNUSED, 0),
};
static struct samsung_cmu_info mif_cmu_info __initdata = {
@@ -2022,3 +2033,429 @@ static void __init exynos5433_cmu_g2d_init(struct device_node *np)
CLK_OF_DECLARE(exynos5433_cmu_g2d, "samsung,exynos5433-cmu-g2d",
exynos5433_cmu_g2d_init);
+
+/*
+ * Register offset definitions for CMU_DISP
+ */
+#define DISP_PLL_LOCK 0x0000
+#define DISP_PLL_CON0 0x0100
+#define DISP_PLL_CON1 0x0104
+#define DISP_PLL_FREQ_DET 0x0108
+#define MUX_SEL_DISP0 0x0200
+#define MUX_SEL_DISP1 0x0204
+#define MUX_SEL_DISP2 0x0208
+#define MUX_SEL_DISP3 0x020c
+#define MUX_SEL_DISP4 0x0210
+#define MUX_ENABLE_DISP0 0x0300
+#define MUX_ENABLE_DISP1 0x0304
+#define MUX_ENABLE_DISP2 0x0308
+#define MUX_ENABLE_DISP3 0x030c
+#define MUX_ENABLE_DISP4 0x0310
+#define MUX_STAT_DISP0 0x0400
+#define MUX_STAT_DISP1 0x0404
+#define MUX_STAT_DISP2 0x0408
+#define MUX_STAT_DISP3 0x040c
+#define MUX_STAT_DISP4 0x0410
+#define MUX_IGNORE_DISP2 0x0508
+#define DIV_DISP 0x0600
+#define DIV_DISP_PLL_FREQ_DET 0x0604
+#define DIV_STAT_DISP 0x0700
+#define DIV_STAT_DISP_PLL_FREQ_DET 0x0704
+#define ENABLE_ACLK_DISP0 0x0800
+#define ENABLE_ACLK_DISP1 0x0804
+#define ENABLE_PCLK_DISP 0x0900
+#define ENABLE_SCLK_DISP 0x0a00
+#define ENABLE_IP_DISP0 0x0b00
+#define ENABLE_IP_DISP1 0x0b04
+#define CLKOUT_CMU_DISP 0x0c00
+#define CLKOUT_CMU_DISP_DIV_STAT 0x0c04
+
+static unsigned long disp_clk_regs[] __initdata = {
+ DISP_PLL_LOCK,
+ DISP_PLL_CON0,
+ DISP_PLL_CON1,
+ DISP_PLL_FREQ_DET,
+ MUX_SEL_DISP0,
+ MUX_SEL_DISP1,
+ MUX_SEL_DISP2,
+ MUX_SEL_DISP3,
+ MUX_SEL_DISP4,
+ MUX_ENABLE_DISP0,
+ MUX_ENABLE_DISP1,
+ MUX_ENABLE_DISP2,
+ MUX_ENABLE_DISP3,
+ MUX_ENABLE_DISP4,
+ MUX_STAT_DISP0,
+ MUX_STAT_DISP1,
+ MUX_STAT_DISP2,
+ MUX_STAT_DISP3,
+ MUX_STAT_DISP4,
+ MUX_IGNORE_DISP2,
+ DIV_DISP,
+ DIV_DISP_PLL_FREQ_DET,
+ DIV_STAT_DISP,
+ DIV_STAT_DISP_PLL_FREQ_DET,
+ ENABLE_ACLK_DISP0,
+ ENABLE_ACLK_DISP1,
+ ENABLE_PCLK_DISP,
+ ENABLE_SCLK_DISP,
+ ENABLE_IP_DISP0,
+ ENABLE_IP_DISP1,
+ CLKOUT_CMU_DISP,
+ CLKOUT_CMU_DISP_DIV_STAT,
+};
+
+/* list of all parent clock list */
+PNAME(mout_disp_pll_p) = { "fin_pll", "fout_disp_pll", };
+PNAME(mout_sclk_dsim1_user_p) = { "fin_pll", "sclk_dsim1_disp", };
+PNAME(mout_sclk_dsim0_user_p) = { "fin_pll", "sclk_dsim0_disp", };
+PNAME(mout_sclk_dsd_user_p) = { "fin_pll", "sclk_dsd_disp", };
+PNAME(mout_sclk_decon_tv_eclk_user_p) = { "fin_pll",
+ "sclk_decon_tv_eclk_disp", };
+PNAME(mout_sclk_decon_vclk_user_p) = { "fin_pll",
+ "sclk_decon_vclk_disp", };
+PNAME(mout_sclk_decon_eclk_user_p) = { "fin_pll",
+ "sclk_decon_eclk_disp", };
+PNAME(mout_sclk_decon_tv_vlkc_user_p) = { "fin_pll",
+ "sclk_decon_tv_vclk_disp", };
+PNAME(mout_aclk_disp_333_user_p) = { "fin_pll", "aclk_disp_333", };
+
+PNAME(mout_phyclk_mipidphy1_bitclkdiv8_user_p) = { "fin_pll",
+ "phyclk_mipidphy1_bitclkdiv8_phy", };
+PNAME(mout_phyclk_mipidphy1_rxclkesc0_user_p) = { "fin_pll",
+ "phyclk_mipidphy1_rxclkesc0_phy", };
+PNAME(mout_phyclk_mipidphy0_bitclkdiv8_user_p) = { "fin_pll",
+ "phyclk_mipidphy0_bitclkdiv8_phy", };
+PNAME(mout_phyclk_mipidphy0_rxclkesc0_user_p) = { "fin_pll",
+ "phyclk_mipidphy0_rxclkesc0_phy", };
+PNAME(mout_phyclk_hdmiphy_tmds_clko_user_p) = { "fin_pll",
+ "phyclk_hdmiphy_tmds_clko_phy", };
+PNAME(mout_phyclk_hdmiphy_pixel_clko_user_p) = { "fin_pll",
+ "phyclk_hdmiphy_pixel_clko_phy", };
+
+PNAME(mout_sclk_dsim0_p) = { "mout_disp_pll",
+ "mout_sclk_dsim0_user", };
+PNAME(mout_sclk_decon_tv_eclk_p) = { "mout_disp_pll",
+ "mout_sclk_decon_tv_eclk_user", };
+PNAME(mout_sclk_decon_vclk_p) = { "mout_disp_pll",
+ "mout_sclk_decon_vclk_user", };
+PNAME(mout_sclk_decon_eclk_p) = { "mout_disp_pll",
+ "mout_sclk_decon_eclk_user", };
+
+PNAME(mout_sclk_dsim1_b_disp_p) = { "mout_sclk_dsim1_a_disp",
+ "mout_sclk_dsim1_user", };
+PNAME(mout_sclk_decon_tv_vclk_c_disp_p) = {
+ "mout_phyclk_hdmiphy_pixel_clko_user",
+ "mout_sclk_decon_tv_vclk_b_disp", };
+PNAME(mout_sclk_decon_tv_vclk_b_disp_p) = { "mout_sclk_decon_tv_vclk_a_disp",
+ "mout_sclk_decon_tv_vclk_user", };
+
+static struct samsung_pll_clock disp_pll_clks[] __initdata = {
+ PLL(pll_35xx, CLK_FOUT_DISP_PLL, "fout_disp_pll", "fin_pll",
+ DISP_PLL_LOCK, DISP_PLL_CON0, exynos5443_pll_rates),
+};
+
+static struct samsung_fixed_factor_clock disp_fixed_factor_clks[] __initdata = {
+ /*
+ * sclk_rgb_{vclk|tv_vclk} is half clock of sclk_decon_{vclk|tv_vclk}.
+ * The divider has fixed value (2) between sclk_rgb_{vclk|tv_vclk}
+ * and sclk_decon_{vclk|tv_vclk}.
+ */
+ FFACTOR(CLK_SCLK_RGB_VCLK, "sclk_rgb_vclk", "sclk_decon_vclk",
+ 1, 2, 0),
+ FFACTOR(CLK_SCLK_RGB_TV_VCLK, "sclk_rgb_tv_vclk", "sclk_decon_tv_vclk",
+ 1, 2, 0),
+};
+
+static struct samsung_fixed_rate_clock disp_fixed_clks[] __initdata = {
+ /* PHY clocks from MIPI_DPHY1 */
+ FRATE(0, "phyclk_mipidphy1_bitclkdiv8_phy", NULL, CLK_IS_ROOT,
+ 188000000),
+ FRATE(0, "phyclk_mipidphy1_rxclkesc0_phy", NULL, CLK_IS_ROOT,
+ 100000000),
+ /* PHY clocks from MIPI_DPHY0 */
+ FRATE(0, "phyclk_mipidphy0_bitclkdiv8_phy", NULL, CLK_IS_ROOT,
+ 188000000),
+ FRATE(0, "phyclk_mipidphy0_rxclkesc0_phy", NULL, CLK_IS_ROOT,
+ 100000000),
+ /* PHY clocks from HDMI_PHY */
+ FRATE(0, "phyclk_hdmiphy_tmds_clko_phy", NULL, CLK_IS_ROOT, 300000000),
+ FRATE(0, "phyclk_hdmiphy_pixel_clko_phy", NULL, CLK_IS_ROOT, 166000000),
+};
+
+static struct samsung_mux_clock disp_mux_clks[] __initdata = {
+ /* MUX_SEL_DISP0 */
+ MUX(CLK_MOUT_DISP_PLL, "mout_disp_pll", mout_disp_pll_p, MUX_SEL_DISP0,
+ 0, 1),
+
+ /* MUX_SEL_DISP1 */
+ MUX(CLK_MOUT_SCLK_DSIM1_USER, "mout_sclk_dsim1_user",
+ mout_sclk_dsim1_user_p, MUX_SEL_DISP1, 28, 1),
+ MUX(CLK_MOUT_SCLK_DSIM0_USER, "mout_sclk_dsim0_user",
+ mout_sclk_dsim0_user_p, MUX_SEL_DISP1, 24, 1),
+ MUX(CLK_MOUT_SCLK_DSD_USER, "mout_sclk_dsd_user", mout_sclk_dsd_user_p,
+ MUX_SEL_DISP1, 20, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_ECLK_USER, "mout_sclk_decon_tv_eclk_user",
+ mout_sclk_decon_tv_eclk_user_p, MUX_SEL_DISP1, 16, 1),
+ MUX(CLK_MOUT_SCLK_DECON_VCLK_USER, "mout_sclk_decon_vclk_user",
+ mout_sclk_decon_vclk_user_p, MUX_SEL_DISP1, 12, 1),
+ MUX(CLK_MOUT_SCLK_DECON_ECLK_USER, "mout_sclk_decon_eclk_user",
+ mout_sclk_decon_eclk_user_p, MUX_SEL_DISP1, 8, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_USER, "mout_sclk_decon_tv_vclk_user",
+ mout_sclk_decon_tv_vlkc_user_p, MUX_SEL_DISP1, 4, 1),
+ MUX(CLK_MOUT_ACLK_DISP_333_USER, "mout_aclk_disp_333_user",
+ mout_aclk_disp_333_user_p, MUX_SEL_DISP1, 0, 1),
+
+ /* MUX_SEL_DISP2 */
+ MUX(CLK_MOUT_PHYCLK_MIPIDPHY1_BITCLKDIV8_USER,
+ "mout_phyclk_mipidphy1_bitclkdiv8_user",
+ mout_phyclk_mipidphy1_bitclkdiv8_user_p, MUX_SEL_DISP2,
+ 20, 1),
+ MUX(CLK_MOUT_PHYCLK_MIPIDPHY1_RXCLKESC0_USER,
+ "mout_phyclk_mipidphy1_rxclkesc0_user",
+ mout_phyclk_mipidphy1_rxclkesc0_user_p, MUX_SEL_DISP2,
+ 16, 1),
+ MUX(CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER,
+ "mout_phyclk_mipidphy0_bitclkdiv8_user",
+ mout_phyclk_mipidphy0_bitclkdiv8_user_p, MUX_SEL_DISP2,
+ 12, 1),
+ MUX(CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER,
+ "mout_phyclk_mipidphy0_rxclkesc0_user",
+ mout_phyclk_mipidphy0_rxclkesc0_user_p, MUX_SEL_DISP2,
+ 8, 1),
+ MUX(CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER,
+ "mout_phyclk_hdmiphy_tmds_clko_user",
+ mout_phyclk_hdmiphy_tmds_clko_user_p, MUX_SEL_DISP2,
+ 4, 1),
+ MUX(CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER,
+ "mout_phyclk_hdmiphy_pixel_clko_user",
+ mout_phyclk_hdmiphy_pixel_clko_user_p, MUX_SEL_DISP2,
+ 0, 1),
+
+ /* MUX_SEL_DISP3 */
+ MUX(CLK_MOUT_SCLK_DSIM0, "mout_sclk_dsim0", mout_sclk_dsim0_p,
+ MUX_SEL_DISP3, 12, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_ECLK, "mout_sclk_decon_tv_eclk",
+ mout_sclk_decon_tv_eclk_p, MUX_SEL_DISP3, 8, 1),
+ MUX(CLK_MOUT_SCLK_DECON_VCLK, "mout_sclk_decon_vclk",
+ mout_sclk_decon_vclk_p, MUX_SEL_DISP3, 4, 1),
+ MUX(CLK_MOUT_SCLK_DECON_ECLK, "mout_sclk_decon_eclk",
+ mout_sclk_decon_eclk_p, MUX_SEL_DISP3, 0, 1),
+
+ /* MUX_SEL_DISP4 */
+ MUX(CLK_MOUT_SCLK_DSIM1_B_DISP, "mout_sclk_dsim1_b_disp",
+ mout_sclk_dsim1_b_disp_p, MUX_SEL_DISP4, 16, 1),
+ MUX(CLK_MOUT_SCLK_DSIM1_A_DISP, "mout_sclk_dsim1_a_disp",
+ mout_sclk_dsim0_p, MUX_SEL_DISP4, 12, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_C_DISP,
+ "mout_sclk_decon_tv_vclk_c_disp",
+ mout_sclk_decon_tv_vclk_c_disp_p, MUX_SEL_DISP4, 8, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_B_DISP,
+ "mout_sclk_decon_tv_vclk_b_disp",
+ mout_sclk_decon_tv_vclk_b_disp_p, MUX_SEL_DISP4, 4, 1),
+ MUX(CLK_MOUT_SCLK_DECON_TV_VCLK_A_DISP,
+ "mout_sclk_decon_tv_vclk_a_disp",
+ mout_sclk_decon_vclk_p, MUX_SEL_DISP4, 0, 1),
+};
+
+static struct samsung_div_clock disp_div_clks[] __initdata = {
+ /* DIV_DISP */
+ DIV(CLK_DIV_SCLK_DSIM1_DISP, "div_sclk_dsim1_disp",
+ "mout_sclk_dsim1_b_disp", DIV_DISP, 24, 3),
+ DIV(CLK_DIV_SCLK_DECON_TV_VCLK_DISP, "div_sclk_decon_tv_vclk_disp",
+ "mout_sclk_decon_tv_vclk_c_disp", DIV_DISP, 20, 3),
+ DIV(CLK_DIV_SCLK_DSIM0_DISP, "div_sclk_dsim0_disp", "mout_sclk_dsim0",
+ DIV_DISP, 16, 3),
+ DIV(CLK_DIV_SCLK_DECON_TV_ECLK_DISP, "div_sclk_decon_tv_eclk_disp",
+ "mout_sclk_decon_tv_eclk", DIV_DISP, 12, 3),
+ DIV(CLK_DIV_SCLK_DECON_VCLK_DISP, "div_sclk_decon_vclk_disp",
+ "mout_sclk_decon_vclk", DIV_DISP, 8, 3),
+ DIV(CLK_DIV_SCLK_DECON_ECLK_DISP, "div_sclk_decon_eclk_disp",
+ "mout_sclk_decon_eclk", DIV_DISP, 4, 3),
+ DIV(CLK_DIV_PCLK_DISP, "div_pclk_disp", "mout_aclk_disp_333_user",
+ DIV_DISP, 0, 2),
+};
+
+static struct samsung_gate_clock disp_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_DISP0 */
+ GATE(CLK_ACLK_DECON_TV, "aclk_decon_tv", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP0, 2, 0, 0),
+ GATE(CLK_ACLK_DECON, "aclk_decon", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP0, 0, 0, 0),
+
+ /* ENABLE_ACLK_DISP1 */
+ GATE(CLK_ACLK_SMMU_TV1X, "aclk_smmu_tv1x", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP1, 25, 0, 0),
+ GATE(CLK_ACLK_SMMU_TV0X, "aclk_smmu_tv0x", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP1, 24, 0, 0),
+ GATE(CLK_ACLK_SMMU_DECON1X, "aclk_smmu_decon1x",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 23, 0, 0),
+ GATE(CLK_ACLK_SMMU_DECON0X, "aclk_smmu_decon0x",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 22, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_TV_M3, "aclk_bts_decon_tv_m3",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 21, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_TV_M2, "aclk_bts_decon_tv_m2",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 20, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_TV_M1, "aclk_bts_decon_tv_m1",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 19, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_TV_M0, "aclk-bts_decon_tv_m0",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 18, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_NM4, "aclk_bts_decon_nm4",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 17, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_NM3, "aclk_bts_decon_nm3",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 16, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_NM2, "aclk_bts_decon_nm2",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 15, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_NM1, "aclk_bts_decon_nm1",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 14, 0, 0),
+ GATE(CLK_ACLK_BTS_DECON_NM0, "aclk_bts_decon_nm0",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 13, 0, 0),
+ GATE(CLK_ACLK_AHB2APB_DISPSFR2P, "aclk_ahb2apb_dispsfr2p",
+ "div_pclk_disp", ENABLE_ACLK_DISP1,
+ 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_DISPSFR1P, "aclk_ahb2apb_dispsfr1p",
+ "div_pclk_disp", ENABLE_ACLK_DISP1,
+ 11, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_DISPSFR0P, "aclk_ahb2apb_dispsfr0p",
+ "div_pclk_disp", ENABLE_ACLK_DISP1,
+ 10, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB_DISPH, "aclk_ahb_disph", "div_pclk_disp",
+ ENABLE_ACLK_DISP1, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_TV1X, "aclk_xiu_tv1x", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP1, 7, 0, 0),
+ GATE(CLK_ACLK_XIU_TV0X, "aclk_xiu_tv0x", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP1, 6, 0, 0),
+ GATE(CLK_ACLK_XIU_DECON1X, "aclk_xiu_decon1x",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 5, 0, 0),
+ GATE(CLK_ACLK_XIU_DECON0X, "aclk_xiu_decon0x",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 4, 0, 0),
+ GATE(CLK_ACLK_XIU_DISP1X, "aclk_xiu_disp1x", "mout_aclk_disp_333_user",
+ ENABLE_ACLK_DISP1, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_DISPNP_100, "aclk_xiu_dispnp_100", "div_pclk_disp",
+ ENABLE_ACLK_DISP1, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DISP1ND_333, "aclk_disp1nd_333",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_DISP0ND_333, "aclk_disp0nd_333",
+ "mout_aclk_disp_333_user", ENABLE_ACLK_DISP1,
+ 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_DISP */
+ GATE(CLK_PCLK_SMMU_TV1X, "pclk_smmu_tv1x", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 23, 0, 0),
+ GATE(CLK_PCLK_SMMU_TV0X, "pclk_smmu_tv0x", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 22, 0, 0),
+ GATE(CLK_PCLK_SMMU_DECON1X, "pclk_smmu_decon1x", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 21, 0, 0),
+ GATE(CLK_PCLK_SMMU_DECON0X, "pclk_smmu_decon0x", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 20, 0, 0),
+ GATE(CLK_PCLK_BTS_DECON_TV_M3, "pclk_bts_decon_tv_m3", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 19, 0, 0),
+ GATE(CLK_PCLK_BTS_DECON_TV_M2, "pclk_bts_decon_tv_m2", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 18, 0, 0),
+ GATE(CLK_PCLK_BTS_DECON_TV_M1, "pclk_bts_decon_tv_m1", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 17, 0, 0),
+ GATE(CLK_PCLK_BTS_DECON_TV_M0, "pclk_bts_decon_tv_m0", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 16, 0, 0),
+ GATE(CLK_PCLK_BTS_DECONM4, "pclk_bts_deconm4", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 15, 0, 0),
+ GATE(CLK_PCLK_BTS_DECONM3, "pclk_bts_deconm3", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 14, 0, 0),
+ GATE(CLK_PCLK_BTS_DECONM2, "pclk_bts_deconm2", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 13, 0, 0),
+ GATE(CLK_PCLK_BTS_DECONM1, "pclk_bts_deconm1", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 12, 0, 0),
+ GATE(CLK_PCLK_BTS_DECONM0, "pclk_bts_deconm0", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 11, 0, 0),
+ GATE(CLK_PCLK_MIC1, "pclk_mic1", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 10, 0, 0),
+ GATE(CLK_PCLK_PMU_DISP, "pclk_pmu_disp", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_DISP, "pclk_sysreg_disp", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_HDMIPHY, "pclk_hdmiphy", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 7, 0, 0),
+ GATE(CLK_PCLK_HDMI, "pclk_hdmi", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 6, 0, 0),
+ GATE(CLK_PCLK_MIC0, "pclk_mic0", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 5, 0, 0),
+ GATE(CLK_PCLK_DSIM1, "pclk_dsim1", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 3, 0, 0),
+ GATE(CLK_PCLK_DSIM0, "pclk_dsim0", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 2, 0, 0),
+ GATE(CLK_PCLK_DECON_TV, "pclk_decon_tv", "div_pclk_disp",
+ ENABLE_PCLK_DISP, 1, 0, 0),
+
+ /* ENABLE_SCLK_DISP */
+ GATE(CLK_PHYCLK_MIPIDPHY1_BITCLKDIV8, "phyclk_mipidphy1_bitclkdiv8",
+ "mout_phyclk_mipidphy1_bitclkdiv8_user",
+ ENABLE_SCLK_DISP, 26, 0, 0),
+ GATE(CLK_PHYCLK_MIPIDPHY1_RXCLKESC0, "phyclk_mipidphy1_rxclkesc0",
+ "mout_phyclk_mipidphy1_rxclkesc0_user",
+ ENABLE_SCLK_DISP, 25, 0, 0),
+ GATE(CLK_SCLK_RGB_TV_VCLK_TO_DSIM1, "sclk_rgb_tv_vclk_to_dsim1",
+ "sclk_rgb_tv_vclk", ENABLE_SCLK_DISP, 24, 0, 0),
+ GATE(CLK_SCLK_RGB_TV_VCLK_TO_MIC1, "sclk_rgb_tv_vclk_to_mic1",
+ "sclk_rgb_tv_vclk", ENABLE_SCLK_DISP, 23, 0, 0),
+ GATE(CLK_SCLK_DSIM1, "sclk_dsim1", "div_sclk_dsim1_disp",
+ ENABLE_SCLK_DISP, 22, 0, 0),
+ GATE(CLK_SCLK_DECON_TV_VCLK, "sclk_decon_tv_vclk",
+ "div_sclk_decon_tv_vclk_disp",
+ ENABLE_SCLK_DISP, 21, 0, 0),
+ GATE(CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8, "phyclk_mipidphy0_bitclkdiv8",
+ "mout_phyclk_mipidphy0_bitclkdiv8_user",
+ ENABLE_SCLK_DISP, 15, 0, 0),
+ GATE(CLK_PHYCLK_MIPIDPHY0_RXCLKESC0, "phyclk_mipidphy0_rxclkesc0",
+ "mout_phyclk_mipidphy0_rxclkesc0_user",
+ ENABLE_SCLK_DISP, 14, 0, 0),
+ GATE(CLK_PHYCLK_HDMIPHY_TMDS_CLKO, "phyclk_hdmiphy_tmds_clko",
+ "mout_phyclk_hdmiphy_tmds_clko_user",
+ ENABLE_SCLK_DISP, 13, 0, 0),
+ GATE(CLK_PHYCLK_HDMI_PIXEL, "phyclk_hdmi_pixel",
+ "sclk_rgb_tv_vclk", ENABLE_SCLK_DISP, 12, 0, 0),
+ GATE(CLK_SCLK_RGB_VCLK_TO_SMIES, "sclk_rgb_vclk_to_smies",
+ "sclk_rgb_vclk", ENABLE_SCLK_DISP, 11, 0, 0),
+ GATE(CLK_SCLK_RGB_VCLK_TO_DSIM0, "sclk_rgb_vclk_to_dsim0",
+ "sclk_rgb_vclk", ENABLE_SCLK_DISP, 9, 0, 0),
+ GATE(CLK_SCLK_RGB_VCLK_TO_MIC0, "sclk_rgb_vclk_to_mic0",
+ "sclk_rgb_vclk", ENABLE_SCLK_DISP, 8, 0, 0),
+ GATE(CLK_SCLK_DSD, "sclk_dsd", "mout_sclk_dsd_user",
+ ENABLE_SCLK_DISP, 7, 0, 0),
+ GATE(CLK_SCLK_HDMI_SPDIF, "sclk_hdmi_spdif", "sclk_hdmi_spdif_disp",
+ ENABLE_SCLK_DISP, 6, 0, 0),
+ GATE(CLK_SCLK_DSIM0, "sclk_dsim0", "div_sclk_dsim0_disp",
+ ENABLE_SCLK_DISP, 5, 0, 0),
+ GATE(CLK_SCLK_DECON_TV_ECLK, "sclk_decon_tv_eclk",
+ "div_sclk_decon_tv_eclk_disp",
+ ENABLE_SCLK_DISP, 4, 0, 0),
+ GATE(CLK_SCLK_DECON_VCLK, "sclk_decon_vclk",
+ "div_sclk_decon_vclk_disp", ENABLE_SCLK_DISP, 3, 0, 0),
+ GATE(CLK_SCLK_DECON_ECLK, "sclk_decon_eclk",
+ "div_sclk_decon_eclk_disp", ENABLE_SCLK_DISP, 2, 0, 0),
+};
+
+static struct samsung_cmu_info disp_cmu_info __initdata = {
+ .pll_clks = disp_pll_clks,
+ .nr_pll_clks = ARRAY_SIZE(disp_pll_clks),
+ .mux_clks = disp_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(disp_mux_clks),
+ .div_clks = disp_div_clks,
+ .nr_div_clks = ARRAY_SIZE(disp_div_clks),
+ .gate_clks = disp_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(disp_gate_clks),
+ .fixed_clks = disp_fixed_clks,
+ .nr_fixed_clks = ARRAY_SIZE(disp_fixed_clks),
+ .fixed_factor_clks = disp_fixed_factor_clks,
+ .nr_fixed_factor_clks = ARRAY_SIZE(disp_fixed_factor_clks),
+ .nr_clk_ids = DISP_NR_CLK,
+ .clk_regs = disp_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(disp_clk_regs),
+};
+
+static void __init exynos5433_cmu_disp_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &disp_cmu_info);
+}
+
+CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp",
+ exynos5433_cmu_disp_init);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index cb0e84e..3783f4a 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -68,6 +68,7 @@
#define CLK_MOUT_SCLK_SPDIF 61
#define CLK_MOUT_SCLK_AUDIO1 62
#define CLK_MOUT_SCLK_AUDIO0 63
+#define CLK_MOUT_SCLK_HDMI_SPDIF 64
#define CLK_DIV_ACLK_FSYS_200 100
#define CLK_DIV_ACLK_IMEM_SSSX_266 101
@@ -337,8 +338,9 @@
#define CLK_SCLK_BUS_PLL 198
#define CLK_SCLK_BUS_PLL_APOLLO 199
#define CLK_SCLK_BUS_PLL_ATLAS 200
+#define CLK_SCLK_HDMI_SPDIF_DISP 201
-#define MIF_NR_CLK 201
+#define MIF_NR_CLK 202
/* CMU_PERIC */
#define CLK_PCLK_SPI2 1
@@ -514,4 +516,114 @@
#define G2D_NR_CLK 27
+/* CMU_DISP */
+#define CLK_FOUT_DISP_PLL 1
+
+#define CLK_MOUT_DISP_PLL 2
+#define CLK_MOUT_SCLK_DSIM1_USER 3
+#define CLK_MOUT_SCLK_DSIM0_USER 4
+#define CLK_MOUT_SCLK_DSD_USER 5
+#define CLK_MOUT_SCLK_DECON_TV_ECLK_USER 6
+#define CLK_MOUT_SCLK_DECON_VCLK_USER 7
+#define CLK_MOUT_SCLK_DECON_ECLK_USER 8
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_USER 9
+#define CLK_MOUT_ACLK_DISP_333_USER 10
+#define CLK_MOUT_PHYCLK_MIPIDPHY1_BITCLKDIV8_USER 11
+#define CLK_MOUT_PHYCLK_MIPIDPHY1_RXCLKESC0_USER 12
+#define CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER 13
+#define CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER 14
+#define CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER 15
+#define CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER 16
+#define CLK_MOUT_SCLK_DSIM0 17
+#define CLK_MOUT_SCLK_DECON_TV_ECLK 18
+#define CLK_MOUT_SCLK_DECON_VCLK 19
+#define CLK_MOUT_SCLK_DECON_ECLK 20
+#define CLK_MOUT_SCLK_DSIM1_B_DISP 21
+#define CLK_MOUT_SCLK_DSIM1_A_DISP 22
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_C_DISP 23
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_B_DISP 24
+#define CLK_MOUT_SCLK_DECON_TV_VCLK_A_DISP 25
+
+#define CLK_DIV_SCLK_DSIM1_DISP 30
+#define CLK_DIV_SCLK_DECON_TV_VCLK_DISP 31
+#define CLK_DIV_SCLK_DSIM0_DISP 32
+#define CLK_DIV_SCLK_DECON_TV_ECLK_DISP 33
+#define CLK_DIV_SCLK_DECON_VCLK_DISP 34
+#define CLK_DIV_SCLK_DECON_ECLK_DISP 35
+#define CLK_DIV_PCLK_DISP 36
+
+#define CLK_ACLK_DECON_TV 40
+#define CLK_ACLK_DECON 41
+#define CLK_ACLK_SMMU_TV1X 42
+#define CLK_ACLK_SMMU_TV0X 43
+#define CLK_ACLK_SMMU_DECON1X 44
+#define CLK_ACLK_SMMU_DECON0X 45
+#define CLK_ACLK_BTS_DECON_TV_M3 46
+#define CLK_ACLK_BTS_DECON_TV_M2 47
+#define CLK_ACLK_BTS_DECON_TV_M1 48
+#define CLK_ACLK_BTS_DECON_TV_M0 49
+#define CLK_ACLK_BTS_DECON_NM4 50
+#define CLK_ACLK_BTS_DECON_NM3 51
+#define CLK_ACLK_BTS_DECON_NM2 52
+#define CLK_ACLK_BTS_DECON_NM1 53
+#define CLK_ACLK_BTS_DECON_NM0 54
+#define CLK_ACLK_AHB2APB_DISPSFR2P 55
+#define CLK_ACLK_AHB2APB_DISPSFR1P 56
+#define CLK_ACLK_AHB2APB_DISPSFR0P 57
+#define CLK_ACLK_AHB_DISPH 58
+#define CLK_ACLK_XIU_TV1X 59
+#define CLK_ACLK_XIU_TV0X 60
+#define CLK_ACLK_XIU_DECON1X 61
+#define CLK_ACLK_XIU_DECON0X 62
+#define CLK_ACLK_XIU_DISP1X 63
+#define CLK_ACLK_XIU_DISPNP_100 64
+#define CLK_ACLK_DISP1ND_333 65
+#define CLK_ACLK_DISP0ND_333 66
+#define CLK_PCLK_SMMU_TV1X 67
+#define CLK_PCLK_SMMU_TV0X 68
+#define CLK_PCLK_SMMU_DECON1X 69
+#define CLK_PCLK_SMMU_DECON0X 70
+#define CLK_PCLK_BTS_DECON_TV_M3 71
+#define CLK_PCLK_BTS_DECON_TV_M2 72
+#define CLK_PCLK_BTS_DECON_TV_M1 73
+#define CLK_PCLK_BTS_DECON_TV_M0 74
+#define CLK_PCLK_BTS_DECONM4 75
+#define CLK_PCLK_BTS_DECONM3 76
+#define CLK_PCLK_BTS_DECONM2 77
+#define CLK_PCLK_BTS_DECONM1 78
+#define CLK_PCLK_BTS_DECONM0 79
+#define CLK_PCLK_MIC1 80
+#define CLK_PCLK_PMU_DISP 81
+#define CLK_PCLK_SYSREG_DISP 82
+#define CLK_PCLK_HDMIPHY 83
+#define CLK_PCLK_HDMI 84
+#define CLK_PCLK_MIC0 85
+#define CLK_PCLK_DSIM1 86
+#define CLK_PCLK_DSIM0 87
+#define CLK_PCLK_DECON_TV 88
+#define CLK_PHYCLK_MIPIDPHY1_BITCLKDIV8 89
+#define CLK_PHYCLK_MIPIDPHY1_RXCLKESC0 90
+#define CLK_SCLK_RGB_TV_VCLK_TO_DSIM1 91
+#define CLK_SCLK_RGB_TV_VCLK_TO_MIC1 92
+#define CLK_SCLK_DSIM1 93
+#define CLK_SCLK_DECON_TV_VCLK 94
+#define CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8 95
+#define CLK_PHYCLK_MIPIDPHY0_RXCLKESC0 96
+#define CLK_PHYCLK_HDMIPHY_TMDS_CLKO 97
+#define CLK_PHYCLK_HDMI_PIXEL 98
+#define CLK_SCLK_RGB_VCLK_TO_SMIES 99
+#define CLK_SCLK_FREQ_DET_DISP_PLL 100
+#define CLK_SCLK_RGB_VCLK_TO_DSIM0 101
+#define CLK_SCLK_RGB_VCLK_TO_MIC0 102
+#define CLK_SCLK_DSD 103
+#define CLK_SCLK_HDMI_SPDIF 104
+#define CLK_SCLK_DSIM0 105
+#define CLK_SCLK_DECON_TV_ECLK 106
+#define CLK_SCLK_DECON_VCLK 107
+#define CLK_SCLK_DECON_ECLK 108
+#define CLK_SCLK_RGB_VCLK 109
+#define CLK_SCLK_RGB_TV_VCLK 110
+
+#define DISP_NR_CLK 111
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 08/12] clk: samsung: exynos5433: Add clocks for CMU_AUD domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (6 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 07/12] clk: samsung: exynos5433: Add clocks for CMU_DISP domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:26 ` [PATCH v3 09/12] clk: samsung: exynos5433: Add clocks for CMU_BUS{0|1|2} domains Chanwoo Choi
` (3 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the mux/divider/gate clocks for CMU_AUD domain which
includes the clocks of Cortex-A5/Bus/Audio clocks.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 7 +
drivers/clk/samsung/clk-exynos5433.c | 172 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 53 +++++++
3 files changed, 232 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 8d3dad4..9a6ae75 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -23,6 +23,8 @@ Required Properties:
which generates clocks for G2D/MDMA IPs.
- "samsung,exynos5433-cmu-disp" - clock controller compatible for CMU_DISP
which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
+ - "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD
+ which generates clocks for Cortex-A5/BUS/AUDIO clocks.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -86,6 +88,11 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_aud: clock-controller@0x114c0000 {
+ compatible = "samsung,exynos5433-cmu-aud";
+ reg = <0x114c0000 0x0b04>;
+ #clock-cells = <1>;
+ };
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 3a3e64b..a33ef2e 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -2459,3 +2459,175 @@ static void __init exynos5433_cmu_disp_init(struct device_node *np)
CLK_OF_DECLARE(exynos5433_cmu_disp, "samsung,exynos5433-cmu-disp",
exynos5433_cmu_disp_init);
+
+/*
+ * Register offset definitions for CMU_AUD
+ */
+#define MUX_SEL_AUD0 0x0200
+#define MUX_SEL_AUD1 0x0204
+#define MUX_ENABLE_AUD0 0x0300
+#define MUX_ENABLE_AUD1 0x0304
+#define MUX_STAT_AUD0 0x0400
+#define DIV_AUD0 0x0600
+#define DIV_AUD1 0x0604
+#define DIV_STAT_AUD0 0x0700
+#define DIV_STAT_AUD1 0x0704
+#define ENABLE_ACLK_AUD 0x0800
+#define ENABLE_PCLK_AUD 0x0900
+#define ENABLE_SCLK_AUD0 0x0a00
+#define ENABLE_SCLK_AUD1 0x0a04
+#define ENABLE_IP_AUD0 0x0b00
+#define ENABLE_IP_AUD1 0x0b04
+
+static unsigned long aud_clk_regs[] __initdata = {
+ MUX_SEL_AUD0,
+ MUX_SEL_AUD1,
+ MUX_ENABLE_AUD0,
+ MUX_ENABLE_AUD1,
+ MUX_STAT_AUD0,
+ DIV_AUD0,
+ DIV_AUD1,
+ DIV_STAT_AUD0,
+ DIV_STAT_AUD1,
+ ENABLE_ACLK_AUD,
+ ENABLE_PCLK_AUD,
+ ENABLE_SCLK_AUD0,
+ ENABLE_SCLK_AUD1,
+ ENABLE_IP_AUD0,
+ ENABLE_IP_AUD1,
+};
+
+/* list of all parent clock list */
+PNAME(mout_aud_pll_user_aud_p) = { "fin_pll", "fout_aud_pll", };
+PNAME(mout_sclk_aud_pcm_p) = { "mout_aud_pll_user", "ioclk_audiocdclk0",};
+
+static struct samsung_fixed_rate_clock aud_fixed_clks[] __initdata = {
+ FRATE(0, "ioclk_jtag_tclk", NULL, CLK_IS_ROOT, 33000000),
+ FRATE(0, "ioclk_slimbus_clk", NULL, CLK_IS_ROOT, 25000000),
+ FRATE(0, "ioclk_i2s_bclk", NULL, CLK_IS_ROOT, 50000000),
+};
+
+static struct samsung_mux_clock aud_mux_clks[] __initdata = {
+ /* MUX_SEL_AUD0 */
+ MUX(CLK_MOUT_AUD_PLL_USER, "mout_aud_pll_user",
+ mout_aud_pll_user_aud_p, MUX_SEL_AUD0, 0, 1),
+
+ /* MUX_SEL_AUD1 */
+ MUX(CLK_MOUT_SCLK_AUD_PCM, "mout_sclk_aud_pcm", mout_sclk_aud_pcm_p,
+ MUX_SEL_AUD1, 8, 1),
+ MUX(CLK_MOUT_SCLK_AUD_I2S, "mout_sclk_aud_i2s", mout_sclk_aud_pcm_p,
+ MUX_SEL_AUD1, 0, 1),
+};
+
+static struct samsung_div_clock aud_div_clks[] __initdata = {
+ /* DIV_AUD0 */
+ DIV(CLK_DIV_ATCLK_AUD, "div_atclk_aud", "div_aud_ca5", DIV_AUD0,
+ 12, 4),
+ DIV(CLK_DIV_PCLK_DBG_AUD, "div_pclk_dbg_aud", "div_aud_ca5", DIV_AUD0,
+ 8, 4),
+ DIV(CLK_DIV_ACLK_AUD, "div_aclk_aud", "div_aud_ca5", DIV_AUD0,
+ 4, 4),
+ DIV(CLK_DIV_AUD_CA5, "div_aud_ca5", "mout_aud_pll_user", DIV_AUD0,
+ 0, 4),
+
+ /* DIV_AUD1 */
+ DIV(CLK_DIV_SCLK_AUD_SLIMBUS, "div_sclk_aud_slimbus",
+ "mout_aud_pll_user", DIV_AUD1, 16, 5),
+ DIV(CLK_DIV_SCLK_AUD_UART, "div_sclk_aud_uart", "mout_aud_pll_user",
+ DIV_AUD1, 12, 4),
+ DIV(CLK_DIV_SCLK_AUD_PCM, "div_sclk_aud_pcm", "mout_sclk_aud_pcm",
+ DIV_AUD1, 4, 8),
+ DIV(CLK_DIV_SCLK_AUD_I2S, "div_sclk_aud_i2s", "mout_sclk_aud_i2s",
+ DIV_AUD1, 0, 4),
+};
+
+static struct samsung_gate_clock aud_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_AUD */
+ GATE(CLK_ACLK_INTR_CTRL, "aclk_intr_ctrl", "div_aclk_aud",
+ ENABLE_ACLK_AUD, 12, 0, 0),
+ GATE(CLK_ACLK_SMMU_LPASSX, "aclk_smmu_lpassx", "div_aclk_aud",
+ ENABLE_ACLK_AUD, 7, 0, 0),
+ GATE(CLK_ACLK_XIU_LPASSX, "aclk_xiu_lpassx", "div_aclk_aud",
+ ENABLE_ACLK_AUD, 0, 4, 0),
+ GATE(CLK_ACLK_AUDNP_133, "aclk_audnp_133", "div_aclk_aud",
+ ENABLE_ACLK_AUD, 0, 3, 0),
+ GATE(CLK_ACLK_AUDND_133, "aclk_audnd_133", "div_aclk_aud",
+ ENABLE_ACLK_AUD, 0, 2, 0),
+ GATE(CLK_ACLK_SRAMC, "aclk_sramc", "div_aclk_aud", ENABLE_ACLK_AUD,
+ 0, 1, 0),
+ GATE(CLK_ACLK_DMAC, "aclk_dmac", "div_aclk_aud", ENABLE_ACLK_AUD,
+ 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_AUD */
+ GATE(CLK_PCLK_WDT1, "pclk_wdt1", "div_aclk_aud", ENABLE_PCLK_AUD,
+ 13, 0, 0),
+ GATE(CLK_PCLK_WDT0, "pclk_wdt0", "div_aclk_aud", ENABLE_PCLK_AUD,
+ 12, 0, 0),
+ GATE(CLK_PCLK_SFR1, "pclk_sfr1", "div_aclk_aud", ENABLE_PCLK_AUD,
+ 11, 0, 0),
+ GATE(CLK_PCLK_SMMU_LPASSX, "pclk_smmu_lpassx", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 10, 0, 0),
+ GATE(CLK_PCLK_GPIO_AUD, "pclk_gpio_aud", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PMU_AUD, "pclk_pmu_aud", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_AUD, "pclk_sysreg_aud", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 7, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_AUD_SLIMBUS, "pclk_aud_slimbus", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 6, 0, 0),
+ GATE(CLK_PCLK_AUD_UART, "pclk_aud_uart", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 5, 0, 0),
+ GATE(CLK_PCLK_AUD_PCM, "pclk_aud_pcm", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 4, 0, 0),
+ GATE(CLK_PCLK_AUD_I2S, "pclk_aud_i2s", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 3, 0, 0),
+ GATE(CLK_PCLK_TIMER, "pclk_timer", "div_aclk_aud", ENABLE_PCLK_AUD,
+ 2, 0, 0),
+ GATE(CLK_PCLK_SFR0_CTRL, "pclk_sfr0_ctrl", "div_aclk_aud",
+ ENABLE_PCLK_AUD, 0, 0, 0),
+
+ /* ENABLE_SCLK_AUD0 */
+ GATE(CLK_ATCLK_AUD, "atclk_aud", "div_atclk_aud", ENABLE_SCLK_AUD0,
+ 2, 0, 0),
+ GATE(CLK_PCLK_DBG_AUD, "pclk_dbg_aud", "div_pclk_dbg_aud",
+ ENABLE_SCLK_AUD0, 1, 0, 0),
+ GATE(CLK_SCLK_AUD_CA5, "sclk_aud_ca5", "div_aud_ca5", ENABLE_SCLK_AUD0,
+ 0, 0, 0),
+
+ /* ENABLE_SCLK_AUD1 */
+ GATE(CLK_SCLK_JTAG_TCK, "sclk_jtag_tck", "ioclk_jtag_tclk",
+ ENABLE_SCLK_AUD1, 6, 0, 0),
+ GATE(CLK_SCLK_SLIMBUS_CLKIN, "sclk_slimbus_clkin", "ioclk_slimbus_clk",
+ ENABLE_SCLK_AUD1, 5, 0, 0),
+ GATE(CLK_SCLK_AUD_SLIMBUS, "sclk_aud_slimbus", "div_sclk_aud_slimbus",
+ ENABLE_SCLK_AUD1, 4, 0, 0),
+ GATE(CLK_SCLK_AUD_UART, "sclk_aud_uart", "div_sclk_aud_uart",
+ ENABLE_SCLK_AUD1, 3, 0, 0),
+ GATE(CLK_SCLK_AUD_PCM, "sclk_aud_pcm", "div_sclk_aud_pcm",
+ ENABLE_SCLK_AUD1, 2, 0, 0),
+ GATE(CLK_SCLK_I2S_BCLK, "sclk_i2s_bclk", "ioclk_i2s_bclk",
+ ENABLE_SCLK_AUD1, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SCLK_AUD_I2S, "sclk_aud_i2s", "div_sclk_aud_i2s",
+ ENABLE_SCLK_AUD1, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+static struct samsung_cmu_info aud_cmu_info __initdata = {
+ .mux_clks = aud_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(aud_mux_clks),
+ .div_clks = aud_div_clks,
+ .nr_div_clks = ARRAY_SIZE(aud_div_clks),
+ .gate_clks = aud_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(aud_gate_clks),
+ .fixed_clks = aud_fixed_clks,
+ .nr_fixed_clks = ARRAY_SIZE(aud_fixed_clks),
+ .nr_clk_ids = AUD_NR_CLK,
+ .clk_regs = aud_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(aud_clk_regs),
+};
+
+static void __init exynos5433_cmu_aud_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &aud_cmu_info);
+}
+CLK_OF_DECLARE(exynos5433_cmu_aud, "samsung,exynos5433-cmu-aud",
+ exynos5433_cmu_aud_init);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 3783f4a..4828e02 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -626,4 +626,57 @@
#define DISP_NR_CLK 111
+/* CMU_AUD */
+#define CLK_MOUT_AUD_PLL_USER 1
+#define CLK_MOUT_SCLK_AUD_PCM 2
+#define CLK_MOUT_SCLK_AUD_I2S 3
+
+#define CLK_DIV_ATCLK_AUD 4
+#define CLK_DIV_PCLK_DBG_AUD 5
+#define CLK_DIV_ACLK_AUD 6
+#define CLK_DIV_AUD_CA5 7
+#define CLK_DIV_SCLK_AUD_SLIMBUS 8
+#define CLK_DIV_SCLK_AUD_UART 9
+#define CLK_DIV_SCLK_AUD_PCM 10
+#define CLK_DIV_SCLK_AUD_I2S 11
+
+#define CLK_ACLK_INTR_CTRL 12
+#define CLK_ACLK_AXIDS2_LPASSP 13
+#define CLK_ACLK_AXIDS1_LPASSP 14
+#define CLK_ACLK_AXI2APB1_LPASSP 15
+#define CLK_ACLK_AXI2APH_LPASSP 16
+#define CLK_ACLK_SMMU_LPASSX 17
+#define CLK_ACLK_AXIDS0_LPASSP 18
+#define CLK_ACLK_AXI2APB0_LPASSP 19
+#define CLK_ACLK_XIU_LPASSX 20
+#define CLK_ACLK_AUDNP_133 21
+#define CLK_ACLK_AUDND_133 22
+#define CLK_ACLK_SRAMC 23
+#define CLK_ACLK_DMAC 24
+#define CLK_PCLK_WDT1 25
+#define CLK_PCLK_WDT0 26
+#define CLK_PCLK_SFR1 27
+#define CLK_PCLK_SMMU_LPASSX 28
+#define CLK_PCLK_GPIO_AUD 29
+#define CLK_PCLK_PMU_AUD 30
+#define CLK_PCLK_SYSREG_AUD 31
+#define CLK_PCLK_AUD_SLIMBUS 32
+#define CLK_PCLK_AUD_UART 33
+#define CLK_PCLK_AUD_PCM 34
+#define CLK_PCLK_AUD_I2S 35
+#define CLK_PCLK_TIMER 36
+#define CLK_PCLK_SFR0_CTRL 37
+#define CLK_ATCLK_AUD 38
+#define CLK_PCLK_DBG_AUD 39
+#define CLK_SCLK_AUD_CA5 40
+#define CLK_SCLK_JTAG_TCK 41
+#define CLK_SCLK_SLIMBUS_CLKIN 42
+#define CLK_SCLK_AUD_SLIMBUS 43
+#define CLK_SCLK_AUD_UART 44
+#define CLK_SCLK_AUD_PCM 45
+#define CLK_SCLK_I2S_BCLK 46
+#define CLK_SCLK_AUD_I2S 47
+
+#define AUD_NR_CLK 48
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH v3 09/12] clk: samsung: exynos5433: Add clocks for CMU_BUS{0|1|2} domains
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (7 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 08/12] clk: samsung: exynos5433: Add clocks for CMU_AUD domain Chanwoo Choi
@ 2015-01-21 6:26 ` Chanwoo Choi
2015-01-21 6:51 ` [PATCH 10/12] clk: samsung: exynos5433: Add missing clocks for CMU_FSYS domain Chanwoo Choi
` (2 subsequent siblings)
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:26 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel,
Arnd Bergmann
This patch adds the mux/divider/gate clocks for CMU_BUS{0|1|2} domains
which contain global data buses clocked at up the 400MHz. These blocks
transfer data between DRAM and various sub-blocks. These clock domains
also contain global peripheral buses clocked at 67/111/200/222/266/333/400
MHz and used for register accesses.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 21 +++
drivers/clk/samsung/clk-exynos5433.c | 187 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 27 ++-
3 files changed, 234 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 9a6ae75..03ae40a 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -25,6 +25,9 @@ Required Properties:
which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
- "samsung,exynos5433-cmu-aud" - clock controller compatible for CMU_AUD
which generates clocks for Cortex-A5/BUS/AUDIO clocks.
+ - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
+ and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
+ which generates global data buses clock and global peripheral buses clock.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -94,6 +97,24 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_bus0: clock-controller@0x13600000 {
+ compatible = "samsung,exynos5433-cmu-bus0";
+ reg = <0x13600000 0x0b04>;
+ #clock-cells = <1>;
+ };
+
+ cmu_bus1: clock-controller@0x14800000 {
+ compatible = "samsung,exynos5433-cmu-bus1";
+ reg = <0x14800000 0x0b04>;
+ #clock-cells = <1>;
+ };
+
+ cmu_bus2: clock-controller@0x13400000 {
+ compatible = "samsung,exynos5433-cmu-bus2";
+ reg = <0x13400000 0x0b04>;
+ #clock-cells = <1>;
+ };
+
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index a33ef2e..e79edd7 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -438,6 +438,14 @@ static struct samsung_div_clock top_div_clks[] __initdata = {
DIV(CLK_DIV_ACLK_PERIS_66_A, "div_aclk_peris_66_a",
"mout_bus_pll_user", DIV_TOP3, 0, 3),
+ /* DIV_TOP4 */
+ DIV(CLK_DIV_ACLK_G3D_400, "div_aclk_g3d_400", "mout_bus_pll_user",
+ DIV_TOP4, 8, 3),
+ DIV(CLK_DIV_ACLK_BUS0_400, "div_aclk_bus0_400", "mout_aclk_bus0_400",
+ DIV_TOP4, 4, 3),
+ DIV(CLK_DIV_ACLK_BUS1_400, "div_aclk_bus1_400", "mout_bus_pll_user",
+ DIV_TOP4, 0, 3),
+
/* DIV_TOP_FSYS0 */
DIV(CLK_DIV_SCLK_MMC1_B, "div_sclk_mmc1_b", "div_sclk_mmc1_a",
DIV_TOP_FSYS0, 16, 8),
@@ -501,6 +509,23 @@ static struct samsung_div_clock top_div_clks[] __initdata = {
static struct samsung_gate_clock top_gate_clks[] __initdata = {
/* ENABLE_ACLK_TOP */
+ GATE(CLK_ACLK_G3D_400, "aclk_g3d_400", "div_aclk_g3d_400",
+ ENABLE_ACLK_TOP, 30, 0, 0),
+ GATE(CLK_ACLK_IMEM_SSX_266, "aclk_imem_ssx_266",
+ "div_aclk_imem_sssx_266", ENABLE_ACLK_TOP,
+ 29, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUS0_400, "aclk_bus0_400", "div_aclk_bus0_400",
+ ENABLE_ACLK_TOP, 26,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_ACLK_BUS1_400, "aclk_bus1_400", "div_aclk_bus1_400",
+ ENABLE_ACLK_TOP, 25,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_ACLK_IMEM_200, "aclk_imem_200", "div_aclk_imem_266",
+ ENABLE_ACLK_TOP, 24,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_ACLK_IMEM_266, "aclk_imem_266", "div_aclk_imem_200",
+ ENABLE_ACLK_TOP, 23,
+ CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
GATE(CLK_ACLK_PERIC_66, "aclk_peric_66", "div_aclk_peric_66_b",
ENABLE_ACLK_TOP, 22,
CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
@@ -2631,3 +2656,165 @@ static void __init exynos5433_cmu_aud_init(struct device_node *np)
}
CLK_OF_DECLARE(exynos5433_cmu_aud, "samsung,exynos5433-cmu-aud",
exynos5433_cmu_aud_init);
+
+
+/*
+ * Register offset definitions for CMU_BUS{0|1|2}
+ */
+#define DIV_BUS 0x0600
+#define DIV_STAT_BUS 0x0700
+#define ENABLE_ACLK_BUS 0x0800
+#define ENABLE_PCLK_BUS 0x0900
+#define ENABLE_IP_BUS0 0x0b00
+#define ENABLE_IP_BUS1 0x0b04
+
+#define MUX_SEL_BUS2 0x0200 /* Only for CMU_BUS2 */
+#define MUX_ENABLE_BUS2 0x0300 /* Only for CMU_BUS2 */
+#define MUX_STAT_BUS2 0x0400 /* Only for CMU_BUS2 */
+
+/* list of all parent clock list */
+PNAME(mout_aclk_bus2_400_p) = { "fin_pll", "aclk_bus2_400", };
+
+#define CMU_BUS_COMMON_CLK_REGS \
+ DIV_BUS, \
+ DIV_STAT_BUS, \
+ ENABLE_ACLK_BUS, \
+ ENABLE_PCLK_BUS, \
+ ENABLE_IP_BUS0, \
+ ENABLE_IP_BUS1
+
+static unsigned long bus01_clk_regs[] __initdata = {
+ CMU_BUS_COMMON_CLK_REGS,
+};
+
+static unsigned long bus2_clk_regs[] __initdata = {
+ MUX_SEL_BUS2,
+ MUX_ENABLE_BUS2,
+ MUX_STAT_BUS2,
+ CMU_BUS_COMMON_CLK_REGS,
+};
+
+static struct samsung_div_clock bus0_div_clks[] __initdata = {
+ /* DIV_BUS0 */
+ DIV(CLK_DIV_PCLK_BUS_133, "div_pclk_bus0_133", "aclk_bus0_400",
+ DIV_BUS, 0, 3),
+};
+
+/* CMU_BUS0 clocks */
+static struct samsung_gate_clock bus0_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_BUS0 */
+ GATE(CLK_ACLK_AHB2APB_BUSP, "aclk_ahb2apb_bus0p", "div_pclk_bus0_133",
+ ENABLE_ACLK_BUS, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUSNP_133, "aclk_bus0np_133", "div_pclk_bus0_133",
+ ENABLE_ACLK_BUS, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUSND_400, "aclk_bus0nd_400", "aclk_bus0_400",
+ ENABLE_ACLK_BUS, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_BUS0 */
+ GATE(CLK_PCLK_BUSSRVND_133, "pclk_bus0srvnd_133", "div_pclk_bus0_133",
+ ENABLE_PCLK_BUS, 2, 0, 0),
+ GATE(CLK_PCLK_PMU_BUS, "pclk_pmu_bus0", "div_pclk_bus0_133",
+ ENABLE_PCLK_BUS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_BUS, "pclk_sysreg_bus0", "div_pclk_bus0_133",
+ ENABLE_PCLK_BUS, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+/* CMU_BUS1 clocks */
+static struct samsung_div_clock bus1_div_clks[] __initdata = {
+ /* DIV_BUS1 */
+ DIV(CLK_DIV_PCLK_BUS_133, "div_pclk_bus1_133", "aclk_bus1_400",
+ DIV_BUS, 0, 3),
+};
+
+static struct samsung_gate_clock bus1_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_BUS1 */
+ GATE(CLK_ACLK_AHB2APB_BUSP, "aclk_ahb2apb_bus1p", "div_pclk_bus1_133",
+ ENABLE_ACLK_BUS, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUSNP_133, "aclk_bus1np_133", "div_pclk_bus1_133",
+ ENABLE_ACLK_BUS, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUSND_400, "aclk_bus1nd_400", "aclk_bus1_400",
+ ENABLE_ACLK_BUS, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_BUS1 */
+ GATE(CLK_PCLK_BUSSRVND_133, "pclk_bus1srvnd_133", "div_pclk_bus1_133",
+ ENABLE_PCLK_BUS, 2, 0, 0),
+ GATE(CLK_PCLK_PMU_BUS, "pclk_pmu_bus1", "div_pclk_bus1_133",
+ ENABLE_PCLK_BUS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_BUS, "pclk_sysreg_bus1", "div_pclk_bus1_133",
+ ENABLE_PCLK_BUS, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+/* CMU_BUS2 clocks */
+static struct samsung_mux_clock bus2_mux_clks[] __initdata = {
+ /* MUX_SEL_BUS2 */
+ MUX(CLK_MOUT_ACLK_BUS2_400_USER, "mout_aclk_bus2_400_user",
+ mout_aclk_bus2_400_p, MUX_SEL_BUS2, 0, 1),
+};
+
+static struct samsung_div_clock bus2_div_clks[] __initdata = {
+ /* DIV_BUS2 */
+ DIV(CLK_DIV_PCLK_BUS_133, "div_pclk_bus2_133",
+ "mout_aclk_bus2_400_user", DIV_BUS, 0, 3),
+};
+
+static struct samsung_gate_clock bus2_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_BUS2 */
+ GATE(CLK_ACLK_AHB2APB_BUSP, "aclk_ahb2apb_bus2p", "div_pclk_bus2_133",
+ ENABLE_ACLK_BUS, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUSNP_133, "aclk_bus2np_133", "div_pclk_bus2_133",
+ ENABLE_ACLK_BUS, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUS2BEND_400, "aclk_bus2bend_400",
+ "mout_aclk_bus2_400_user", ENABLE_ACLK_BUS,
+ 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BUS2RTND_400, "aclk_bus2rtnd_400",
+ "mout_aclk_bus2_400_user", ENABLE_ACLK_BUS,
+ 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_BUS2 */
+ GATE(CLK_PCLK_BUSSRVND_133, "pclk_bus2srvnd_133", "div_pclk_bus2_133",
+ ENABLE_PCLK_BUS, 2, 0, 0),
+ GATE(CLK_PCLK_PMU_BUS, "pclk_pmu_bus2", "div_pclk_bus2_133",
+ ENABLE_PCLK_BUS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_BUS, "pclk_sysreg_bus2", "div_pclk_bus2_133",
+ ENABLE_PCLK_BUS, 0, CLK_IGNORE_UNUSED, 0),
+};
+
+#define CMU_BUS_INFO_CLKS(id) \
+ .div_clks = bus##id##_div_clks, \
+ .nr_div_clks = ARRAY_SIZE(bus##id##_div_clks), \
+ .gate_clks = bus##id##_gate_clks, \
+ .nr_gate_clks = ARRAY_SIZE(bus##id##_gate_clks), \
+ .nr_clk_ids = BUSx_NR_CLK
+
+static struct samsung_cmu_info bus0_cmu_info __initdata = {
+ CMU_BUS_INFO_CLKS(0),
+ .clk_regs = bus01_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(bus01_clk_regs),
+};
+
+static struct samsung_cmu_info bus1_cmu_info __initdata = {
+ CMU_BUS_INFO_CLKS(1),
+ .clk_regs = bus01_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(bus01_clk_regs),
+};
+
+static struct samsung_cmu_info bus2_cmu_info __initdata = {
+ CMU_BUS_INFO_CLKS(2),
+ .mux_clks = bus2_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(bus2_mux_clks),
+ .clk_regs = bus2_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(bus2_clk_regs),
+};
+
+#define exynos5433_cmu_bus_init(id) \
+static void __init exynos5433_cmu_bus##id##_init(struct device_node *np)\
+{ \
+ samsung_cmu_register_one(np, &bus##id##_cmu_info); \
+} \
+CLK_OF_DECLARE(exynos5433_cmu_bus##id, \
+ "samsung,exynos5433-cmu-bus"#id, \
+ exynos5433_cmu_bus##id##_init)
+
+exynos5433_cmu_bus_init(0);
+exynos5433_cmu_bus_init(1);
+exynos5433_cmu_bus_init(2);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 4828e02..6bc7f51 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -107,6 +107,9 @@
#define CLK_DIV_ACLK_MFC_400 134
#define CLK_DIV_ACLK_G2D_266 135
#define CLK_DIV_ACLK_G2D_400 136
+#define CLK_DIV_ACLK_G3D_400 137
+#define CLK_DIV_ACLK_BUS0_400 138
+#define CLK_DIV_ACLK_BUS1_400 139
#define CLK_ACLK_PERIC_66 200
#define CLK_ACLK_PERIS_66 201
@@ -130,8 +133,14 @@
#define CLK_SCLK_AUDIO0 219
#define CLK_ACLK_G2D_266 220
#define CLK_ACLK_G2D_400 221
+#define CLK_ACLK_G3D_400 222
+#define CLK_ACLK_IMEM_SSX_266 223
+#define CLK_ACLK_BUS0_400 224
+#define CLK_ACLK_BUS1_400 225
+#define CLK_ACLK_IMEM_200 226
+#define CLK_ACLK_IMEM_266 227
-#define TOP_NR_CLK 222
+#define TOP_NR_CLK 228
/* CMU_CPIF */
#define CLK_FOUT_MPHY_PLL 1
@@ -679,4 +688,20 @@
#define AUD_NR_CLK 48
+/* CMU_BUS{0|1|2} */
+#define CLK_DIV_PCLK_BUS_133 1
+
+#define CLK_ACLK_AHB2APB_BUSP 2
+#define CLK_ACLK_BUSNP_133 3
+#define CLK_ACLK_BUSND_400 4
+#define CLK_PCLK_BUSSRVND_133 5
+#define CLK_PCLK_PMU_BUS 6
+#define CLK_PCLK_SYSREG_BUS 7
+
+#define CLK_MOUT_ACLK_BUS2_400_USER 8 /* Only CMU_BUS2 */
+#define CLK_ACLK_BUS2BEND_400 9 /* Only CMU_BUS2 */
+#define CLK_ACLK_BUS2RTND_400 10 /* Only CMU_BUS2 */
+
+#define BUSx_NR_CLK 11
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH 10/12] clk: samsung: exynos5433: Add missing clocks for CMU_FSYS domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (8 preceding siblings ...)
2015-01-21 6:26 ` [PATCH v3 09/12] clk: samsung: exynos5433: Add clocks for CMU_BUS{0|1|2} domains Chanwoo Choi
@ 2015-01-21 6:51 ` Chanwoo Choi
2015-01-21 6:56 ` Chanwoo Choi
2015-01-21 6:51 ` [PATCH 11/12] clk: samsung: exynos5433: Add clocks for CMU_G3D domain Chanwoo Choi
2015-01-21 6:52 ` [PATCH 12/12] clk: samsung: exynos5433: Add clocks for CMU_GSCL domain Chanwoo Choi
11 siblings, 1 reply; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:51 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the mux/divider/gate clocks for CMU_FSYS domain which
contains the clocks of USB/UFS/SDMMC/TSI/PDMA IPs.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
drivers/clk/samsung/clk-exynos5433.c | 302 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 96 ++++++++++-
2 files changed, 395 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index e79edd7..fa39e6c 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -462,6 +462,16 @@ static struct samsung_div_clock top_div_clks[] __initdata = {
DIV(CLK_DIV_SCLK_MMC2_A, "div_sclk_mmc2_a", "mout_sclk_mmc2_b",
DIV_TOP_FSYS1, 0, 4),
+ /* DIV_TOP_FSYS2 */
+ DIV(CLK_DIV_SCLK_PCIE_100, "div_sclk_pcie_100", "mout_sclk_pcie_100",
+ DIV_TOP_FSYS2, 12, 3),
+ DIV(CLK_DIV_SCLK_USBHOST30, "div_sclk_usbhost30",
+ "mout_sclk_usbhost30", DIV_TOP_FSYS2, 8, 4),
+ DIV(CLK_DIV_SCLK_UFSUNIPRO, "div_sclk_ufsunipro",
+ "mout_sclk_ufsunipro", DIV_TOP_FSYS2, 4, 4),
+ DIV(CLK_DIV_SCLK_USBDRD30, "div_sclk_usbdrd30", "mout_sclk_usbdrd30",
+ DIV_TOP_FSYS2, 0, 4),
+
/* DIV_TOP_PERIC0 */
DIV(CLK_DIV_SCLK_SPI1_B, "div_sclk_spi1_b", "div_sclk_spi1_a",
DIV_TOP_PERIC0, 16, 8),
@@ -543,12 +553,23 @@ static struct samsung_gate_clock top_gate_clks[] __initdata = {
CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
/* ENABLE_SCLK_TOP_FSYS */
+ GATE(CLK_SCLK_PCIE_100_FSYS, "sclk_pcie_100_fsys", "div_sclk_pcie_100",
+ ENABLE_SCLK_TOP_FSYS, 7, 0, 0),
GATE(CLK_SCLK_MMC2_FSYS, "sclk_mmc2_fsys", "div_sclk_mmc2_b",
ENABLE_SCLK_TOP_FSYS, 6, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MMC1_FSYS, "sclk_mmc1_fsys", "div_sclk_mmc1_b",
ENABLE_SCLK_TOP_FSYS, 5, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MMC0_FSYS, "sclk_mmc0_fsys", "div_sclk_mmc0_b",
ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UFSUNIPRO_FSYS, "sclk_ufsunipro_fsys",
+ "div_sclk_ufsunipro", ENABLE_SCLK_TOP_FSYS,
+ 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_USBHOST30_FSYS, "sclk_usbhost30_fsys",
+ "div_sclk_usbhost30", ENABLE_SCLK_TOP_FSYS,
+ 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_USBDRD30_FSYS, "sclk_usbdrd30_fsys",
+ "div_sclk_usbdrd30", ENABLE_SCLK_TOP_FSYS,
+ 0, CLK_SET_RATE_PARENT, 0),
/* ENABLE_SCLK_TOP_PERIC */
GATE(CLK_SCLK_SPI4_PERIC, "sclk_spi4_peric", "div_sclk_spi4_b",
@@ -1832,10 +1853,45 @@ CLK_OF_DECLARE(exynos5433_cmu_peris, "samsung,exynos5433-cmu-peris",
#define ENABLE_IP_FSYS1 0x0b04
/* list of all parent clock list */
+PNAME(mout_sclk_ufs_mphy_user_p) = { "fin_pll", "sclk_ufs_mphy", };
PNAME(mout_aclk_fsys_200_user_p) = { "fin_pll", "div_aclk_fsys_200", };
+PNAME(mout_sclk_pcie_100_user_p) = { "fin_pll", "sclk_pcie_100_fsys",};
+PNAME(mout_sclk_ufsunipro_user_p) = { "fin_pll", "sclk_ufsunipro_fsys",};
PNAME(mout_sclk_mmc2_user_p) = { "fin_pll", "sclk_mmc2_fsys", };
PNAME(mout_sclk_mmc1_user_p) = { "fin_pll", "sclk_mmc1_fsys", };
PNAME(mout_sclk_mmc0_user_p) = { "fin_pll", "sclk_mmc0_fsys", };
+PNAME(mout_sclk_usbhost30_user_p) = { "fin_pll", "sclk_usbhost30_fsys",};
+PNAME(mout_sclk_usbdrd30_user_p) = { "fin_pll", "sclk_usbdrd30_fsys", };
+
+PNAME(mout_phyclk_usbhost30_uhost30_pipe_pclk_user_p)
+ = { "fin_pll", "phyclk_usbhost30_uhost30_pipe_pclk_phy", };
+PNAME(mout_phyclk_usbhost30_uhost30_phyclock_user_p)
+ = { "fin_pll", "phyclk_usbhost30_uhost30_phyclock_phy", };
+PNAME(mout_phyclk_usbhost20_phy_hsic1_p)
+ = { "fin_pll", "phyclk_usbhost20_phy_hsic1_phy", };
+PNAME(mout_phyclk_usbhost20_phy_clk48mohci_user_p)
+ = { "fin_pll", "phyclk_usbhost20_phy_clk48mohci_phy", };
+PNAME(mout_phyclk_usbhost20_phy_phyclock_user_p)
+ = { "fin_pll", "phyclk_usbhost20_phy_phyclock_phy", };
+PNAME(mout_phyclk_usbhost20_phy_freeclk_user_p)
+ = { "fin_pll", "phyclk_usbhost20_phy_freeclk_phy", };
+PNAME(mout_phyclk_usbdrd30_udrd30_pipe_pclk_p)
+ = { "fin_pll", "phyclk_usbdrd30_udrd30_pipe_pclk_phy", };
+PNAME(mout_phyclk_usbdrd30_udrd30_phyclock_user_p)
+ = { "fin_pll", "phyclk_usbdrd30_udrd30_phyclock_phy", };
+PNAME(mout_phyclk_ufs_rx1_symbol_user_p)
+ = { "fin_pll", "phyclk_ufs_rx1_symbol_phy", };
+PNAME(mout_phyclk_ufs_rx0_symbol_user_p)
+ = { "fin_pll", "phyclk_ufs_rx0_symbol_phy", };
+PNAME(mout_phyclk_ufs_tx1_symbol_user_p)
+ = { "fin_pll", "phyclk_ufs_tx1_symbol_phy", };
+PNAME(mout_phyclk_ufs_tx0_symbol_user_p)
+ = { "fin_pll", "phyclk_ufs_tx0_symbol_phy", };
+PNAME(mout_phyclk_lli_mphy_to_ufs_user_p)
+ = { "fin_pll", "phyclk_lli_mphy_to_ufs_phy", };
+PNAME(mout_sclk_mphy_p)
+ = { "mout_sclk_ufs_mphy_user",
+ "mout_phyclk_lli_mphy_to_ufs_user", };
static unsigned long fsys_clk_regs[] __initdata = {
MUX_SEL_FSYS0,
@@ -1863,18 +1919,130 @@ static unsigned long fsys_clk_regs[] __initdata = {
ENABLE_IP_FSYS1,
};
+static struct samsung_fixed_rate_clock fsys_fixed_clks[] __initdata = {
+ /* PHY clocks from USBDRD30_PHY */
+ FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY,
+ "phyclk_usbdrd30_udrd30_phyclock_phy", NULL,
+ CLK_IS_ROOT, 60000000),
+ FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY,
+ "phyclk_usbdrd30_udrd30_pipe_pclk_phy", NULL,
+ CLK_IS_ROOT, 125000000),
+ /* PHY clocks from USBHOST30_PHY */
+ FRATE(CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY,
+ "phyclk_usbhost30_uhost30_phyclock_phy", NULL,
+ CLK_IS_ROOT, 60000000),
+ FRATE(CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY,
+ "phyclk_usbhost30_uhost30_pipe_pclk_phy", NULL,
+ CLK_IS_ROOT, 125000000),
+ /* PHY clocks from USBHOST20_PHY */
+ FRATE(CLK_PHYCLK_USBHOST20_PHY_FREECLK_PHY,
+ "phyclk_usbhost20_phy_freeclk_phy", NULL, CLK_IS_ROOT,
+ 60000000),
+ FRATE(CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK_PHY,
+ "phyclk_usbhost20_phy_phyclock_phy", NULL, CLK_IS_ROOT,
+ 60000000),
+ FRATE(CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI_PHY,
+ "phyclk_usbhost20_phy_clk48mohci_phy", NULL,
+ CLK_IS_ROOT, 48000000),
+ FRATE(CLK_PHYCLK_USBHOST20_PHY_HSIC1_PHY,
+ "phyclk_usbhost20_phy_hsic1_phy", NULL, CLK_IS_ROOT,
+ 60000000),
+ /* PHY clocks from UFS_PHY */
+ FRATE(CLK_PHYCLK_UFS_TX0_SYMBOL_PHY, "phyclk_ufs_tx0_symbol_phy",
+ NULL, CLK_IS_ROOT, 300000000),
+ FRATE(CLK_PHYCLK_UFS_RX0_SYMBOL_PHY, "phyclk_ufs_rx0_symbol_phy",
+ NULL, CLK_IS_ROOT, 300000000),
+ FRATE(CLK_PHYCLK_UFS_TX1_SYMBOL_PHY, "phyclk_ufs_tx1_symbol_phy",
+ NULL, CLK_IS_ROOT, 300000000),
+ FRATE(CLK_PHYCLK_UFS_RX1_SYMBOL_PHY, "phyclk_ufs_rx1_symbol_phy",
+ NULL, CLK_IS_ROOT, 300000000),
+ /* PHY clocks from LLI_PHY */
+ FRATE(CLK_PHYCLK_LLI_MPHY_TO_UFS_PHY, "phyclk_lli_mphy_to_ufs_phy",
+ NULL, CLK_IS_ROOT, 26000000),
+};
+
static struct samsung_mux_clock fsys_mux_clks[] __initdata = {
/* MUX_SEL_FSYS0 */
+ MUX(CLK_MOUT_SCLK_UFS_MPHY_USER, "mout_sclk_ufs_mphy_user",
+ mout_sclk_ufs_mphy_user_p, MUX_SEL_FSYS0, 4, 1),
MUX(CLK_MOUT_ACLK_FSYS_200_USER, "mout_aclk_fsys_200_user",
mout_aclk_fsys_200_user_p, MUX_SEL_FSYS0, 0, 1),
/* MUX_SEL_FSYS1 */
+ MUX(CLK_MOUT_SCLK_PCIE_100_USER, "mout_sclk_pcie_100_user",
+ mout_sclk_pcie_100_user_p, MUX_SEL_FSYS1, 28, 1),
+ MUX(CLK_MOUT_SCLK_UFSUNIPRO_USER, "mout_sclk_ufsunipro_user",
+ mout_sclk_ufsunipro_user_p, MUX_SEL_FSYS1, 24, 1),
MUX(CLK_MOUT_SCLK_MMC2_USER, "mout_sclk_mmc2_user",
mout_sclk_mmc2_user_p, MUX_SEL_FSYS1, 20, 1),
MUX(CLK_MOUT_SCLK_MMC1_USER, "mout_sclk_mmc1_user",
mout_sclk_mmc1_user_p, MUX_SEL_FSYS1, 16, 1),
MUX(CLK_MOUT_SCLK_MMC0_USER, "mout_sclk_mmc0_user",
mout_sclk_mmc0_user_p, MUX_SEL_FSYS1, 12, 1),
+ MUX(CLK_MOUT_SCLK_USBHOST30_USER, "mout_sclk_usbhost30_user",
+ mout_sclk_usbhost30_user_p, MUX_SEL_FSYS1, 4, 1),
+ MUX(CLK_MOUT_SCLK_USBDRD30_USER, "mout_sclk_usbdrd30_user",
+ mout_sclk_usbdrd30_user_p, MUX_SEL_FSYS1, 0, 1),
+
+ /* MUX_SEL_FSYS2 */
+ MUX(CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER,
+ "mout_phyclk_usbhost30_uhost30_pipe_pclk_user",
+ mout_phyclk_usbhost30_uhost30_pipe_pclk_user_p,
+ MUX_SEL_FSYS2, 28, 1),
+ MUX(CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER,
+ "mout_phyclk_usbhost30_uhost30_phyclock_user",
+ mout_phyclk_usbhost30_uhost30_phyclock_user_p,
+ MUX_SEL_FSYS2, 24, 1),
+ MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_HSIC1_USER,
+ "mout_phyclk_usbhost20_phy_hsic1",
+ mout_phyclk_usbhost20_phy_hsic1_p,
+ MUX_SEL_FSYS2, 20, 1),
+ MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_CLK48MOHCI_USER,
+ "mout_phyclk_usbhost20_phy_clk48mohci_user",
+ mout_phyclk_usbhost20_phy_clk48mohci_user_p,
+ MUX_SEL_FSYS2, 16, 1),
+ MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_PHYCLOCK_USER,
+ "mout_phyclk_usbhost20_phy_phyclock_user",
+ mout_phyclk_usbhost20_phy_phyclock_user_p,
+ MUX_SEL_FSYS2, 12, 1),
+ MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_PHY_FREECLK_USER,
+ "mout_phyclk_usbhost20_phy_freeclk_user",
+ mout_phyclk_usbhost20_phy_freeclk_user_p,
+ MUX_SEL_FSYS2, 8, 1),
+ MUX(CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER,
+ "mout_phyclk_usbdrd30_udrd30_pipe_pclk_user",
+ mout_phyclk_usbdrd30_udrd30_pipe_pclk_p,
+ MUX_SEL_FSYS2, 4, 1),
+ MUX(CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER,
+ "mout_phyclk_usbdrd30_udrd30_phyclock_user",
+ mout_phyclk_usbdrd30_udrd30_phyclock_user_p,
+ MUX_SEL_FSYS2, 0, 1),
+
+ /* MUX_SEL_FSYS3 */
+ MUX(CLK_MOUT_PHYCLK_UFS_RX1_SYMBOL_USER,
+ "mout_phyclk_ufs_rx1_symbol_user",
+ mout_phyclk_ufs_rx1_symbol_user_p,
+ MUX_SEL_FSYS3, 16, 1),
+ MUX(CLK_MOUT_PHYCLK_UFS_RX0_SYMBOL_USER,
+ "mout_phyclk_ufs_rx0_symbol_user",
+ mout_phyclk_ufs_rx0_symbol_user_p,
+ MUX_SEL_FSYS3, 12, 1),
+ MUX(CLK_MOUT_PHYCLK_UFS_TX1_SYMBOL_USER,
+ "mout_phyclk_ufs_tx1_symbol_user",
+ mout_phyclk_ufs_tx1_symbol_user_p,
+ MUX_SEL_FSYS3, 8, 1),
+ MUX(CLK_MOUT_PHYCLK_UFS_TX0_SYMBOL_USER,
+ "mout_phyclk_ufs_tx0_symbol_user",
+ mout_phyclk_ufs_tx0_symbol_user_p,
+ MUX_SEL_FSYS3, 4, 1),
+ MUX(CLK_MOUT_PHYCLK_LLI_MPHY_TO_UFS_USER,
+ "mout_phyclk_lli_mphy_to_ufs_user",
+ mout_phyclk_lli_mphy_to_ufs_user_p,
+ MUX_SEL_FSYS3, 0, 1),
+
+ /* MUX_SEL_FSYS4 */
+ MUX(CLK_MOUT_SCLK_MPHY, "mout_sclk_mphy", mout_sclk_mphy_p,
+ MUX_SEL_FSYS4, 0, 1),
};
static struct samsung_gate_clock fsys_gate_clks[] __initdata = {
@@ -1902,13 +2070,145 @@ static struct samsung_gate_clock fsys_gate_clks[] __initdata = {
GATE(CLK_ACLK_PDMA0, "aclk_pdma0", "mout_aclk_fsys_200_user",
ENABLE_ACLK_FSYS0, 0, CLK_IGNORE_UNUSED, 0),
+ /* ENABLE_ACLK_FSYS1 */
+ GATE(CLK_ACLK_XIU_FSYSPX, "aclk_xiu_fsyspx", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 27, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB_USBLINKH1, "aclk_ahb_usblinkh1",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 26, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_SMMU_PDMA1, "aclk_smmu_pdma1", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 25, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BTS_PCIE, "aclk_bts_pcie", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 24, 0, 0),
+ GATE(CLK_ACLK_AXIUS_PDMA1, "aclk_axius_pdma1",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 22, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_SMMU_PDMA0, "aclk_smmu_pdma0", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BTS_UFS, "aclk_bts_ufs", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_BTS_USBHOST30, "aclk_bts_usbhost30",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 13, 0, 0),
+ GATE(CLK_ACLK_BTS_USBDRD30, "aclk_bts_usbdrd30",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 12, 0, 0),
+ GATE(CLK_ACLK_AXIUS_PDMA0, "aclk_axius_pdma0",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 11, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AXIUS_USBHS, "aclk_axius_usbhs",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 10, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AXIUS_FSYSSX, "aclk_axius_fsyssx",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2APB_FSYSP, "aclk_ahb2apb_fsysp",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB2AXI_USBHS, "aclk_ahb2axi_usbhs",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 7, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB_USBLINKH0, "aclk_ahb_usblinkh0",
+ "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
+ 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB_USBHS, "aclk_ahb_usbhs", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_AHB_FSYSH, "aclk_ahb_fsysh", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_FSYSX, "aclk_xiu_fsysx", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_FSYSSX, "aclk_xiu_fsyssx", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_FSYSNP_200, "aclk_fsysnp_200", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_FSYSND_200, "aclk_fsysnd_200", "mout_aclk_fsys_200_user",
+ ENABLE_ACLK_FSYS1, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_PCLK_FSYS */
+ GATE(CLK_PCLK_PCIE_CTRL, "pclk_pcie_ctrl", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 17, 0, 0),
+ GATE(CLK_PCLK_SMMU_PDMA1, "pclk_smmu_pdma1", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PCIE_PHY, "pclk_pcie_phy", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 14, 0, 0),
+ GATE(CLK_PCLK_BTS_PCIE, "pclk_bts_pcie", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 13, 0, 0),
+ GATE(CLK_PCLK_SMMU_PDMA0, "pclk_smmu_pdma0", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_BTS_UFS, "pclk_bts_ufs", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 5, 0, 0),
+ GATE(CLK_PCLK_BTS_USBHOST30, "pclk_bts_usbhost30",
+ "mout_aclk_fsys_200_user", ENABLE_PCLK_FSYS, 4, 0, 0),
+ GATE(CLK_PCLK_BTS_USBDRD30, "pclk_bts_usbdrd30",
+ "mout_aclk_fsys_200_user", ENABLE_PCLK_FSYS, 3, 0, 0),
+ GATE(CLK_PCLK_GPIO_FSYS, "pclk_gpio_fsys", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_PMU_FSYS, "pclk_pmu_fsys", "mout_aclk_fsys_200_user",
+ ENABLE_PCLK_FSYS, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_FSYS, "pclk_sysreg_fsys",
+ "mout_aclk_fsys_200_user", ENABLE_PCLK_FSYS,
+ 0, CLK_IGNORE_UNUSED, 0),
+
/* ENABLE_SCLK_FSYS */
+ GATE(CLK_SCLK_PCIE_100, "sclk_pcie_100", "mout_sclk_pcie_100_user",
+ ENABLE_SCLK_FSYS, 21, 0, 0),
+ GATE(CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK,
+ "phyclk_usbhost30_uhost30_pipe_pclk",
+ "mout_phyclk_usbhost30_uhost30_pipe_pclk_user",
+ ENABLE_SCLK_FSYS, 18, 0, 0),
+ GATE(CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK,
+ "phyclk_usbhost30_uhost30_phyclock",
+ "mout_phyclk_usbhost30_uhost30_phyclock_user",
+ ENABLE_SCLK_FSYS, 17, 0, 0),
+ GATE(CLK_PHYCLK_UFS_RX1_SYMBOL, "phyclk_ufs_rx1_symbol",
+ "mout_phyclk_ufs_rx1_symbol_user", ENABLE_SCLK_FSYS,
+ 16, 0, 0),
+ GATE(CLK_PHYCLK_UFS_RX0_SYMBOL, "phyclk_ufs_rx0_symbol",
+ "mout_phyclk_ufs_rx0_symbol_user", ENABLE_SCLK_FSYS,
+ 15, 0, 0),
+ GATE(CLK_PHYCLK_UFS_TX1_SYMBOL, "phyclk_ufs_tx1_symbol",
+ "mout_phyclk_ufs_tx1_symbol_user", ENABLE_SCLK_FSYS,
+ 14, 0, 0),
+ GATE(CLK_PHYCLK_UFS_TX0_SYMBOL, "phyclk_ufs_tx0_symbol",
+ "mout_phyclk_ufs_tx0_symbol_user", ENABLE_SCLK_FSYS,
+ 13, 0, 0),
+ GATE(CLK_PHYCLK_USBHOST20_PHY_HSIC1, "phyclk_usbhost20_phy_hsic1",
+ "mout_phyclk_usbhost20_phy_hsic1", ENABLE_SCLK_FSYS,
+ 12, 0, 0),
+ GATE(CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI,
+ "phyclk_usbhost20_phy_clk48mohci",
+ "mout_phyclk_usbhost20_phy_clk48mohci_user",
+ ENABLE_SCLK_FSYS, 11, 0, 0),
+ GATE(CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK,
+ "phyclk_usbhost20_phy_phyclock",
+ "mout_phyclk_usbhost20_phy_phyclock_user",
+ ENABLE_SCLK_FSYS, 10, 0, 0),
+ GATE(CLK_PHYCLK_USBHOST20_PHY_FREECLK,
+ "phyclk_usbhost20_phy_freeclk",
+ "mout_phyclk_usbhost20_phy_freeclk_user",
+ ENABLE_SCLK_FSYS, 9, 0, 0),
+ GATE(CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK,
+ "phyclk_usbdrd30_udrd30_pipe_pclk",
+ "mout_phyclk_usbdrd30_udrd30_pipe_pclk_user",
+ ENABLE_SCLK_FSYS, 8, 0, 0),
+ GATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK,
+ "phyclk_usbdrd30_udrd30_phyclock",
+ "mout_phyclk_usbdrd30_udrd30_phyclock_user",
+ ENABLE_SCLK_FSYS, 7, 0, 0),
+ GATE(CLK_SCLK_MPHY, "sclk_mphy", "mout_sclk_mphy",
+ ENABLE_SCLK_FSYS, 6, 0, 0),
+ GATE(CLK_SCLK_UFSUNIPRO, "sclk_ufsunipro", "mout_sclk_ufsunipro_user",
+ ENABLE_SCLK_FSYS, 5, 0, 0),
GATE(CLK_SCLK_MMC2, "sclk_mmc2", "mout_sclk_mmc2_user",
ENABLE_SCLK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MMC1, "sclk_mmc1", "mout_sclk_mmc1_user",
ENABLE_SCLK_FSYS, 3, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_MMC0, "sclk_mmc0", "mout_sclk_mmc0_user",
ENABLE_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_USBHOST30, "sclk_usbhost30", "mout_sclk_usbhost30_user",
+ ENABLE_SCLK_FSYS, 1, 0, 0),
+ GATE(CLK_SCLK_USBDRD30, "sclk_usbdrd30", "mout_sclk_usbdrd30_user",
+ ENABLE_SCLK_FSYS, 0, 0, 0),
/* ENABLE_IP_FSYS0 */
GATE(CLK_PDMA1, "pdma1", "aclk_pdma1", ENABLE_IP_FSYS0, 15, 0, 0),
@@ -1920,6 +2220,8 @@ static struct samsung_cmu_info fsys_cmu_info __initdata = {
.nr_mux_clks = ARRAY_SIZE(fsys_mux_clks),
.gate_clks = fsys_gate_clks,
.nr_gate_clks = ARRAY_SIZE(fsys_gate_clks),
+ .fixed_clks = fsys_fixed_clks,
+ .nr_fixed_clks = ARRAY_SIZE(fsys_fixed_clks),
.nr_clk_ids = FSYS_NR_CLK,
.clk_regs = fsys_clk_regs,
.nr_clk_regs = ARRAY_SIZE(fsys_clk_regs),
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index 6bc7f51..bd445d2 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -110,6 +110,10 @@
#define CLK_DIV_ACLK_G3D_400 137
#define CLK_DIV_ACLK_BUS0_400 138
#define CLK_DIV_ACLK_BUS1_400 139
+#define CLK_DIV_SCLK_PCIE_100 140
+#define CLK_DIV_SCLK_USBHOST30 141
+#define CLK_DIV_SCLK_UFSUNIPRO 142
+#define CLK_DIV_SCLK_USBDRD30 143
#define CLK_ACLK_PERIC_66 200
#define CLK_ACLK_PERIS_66 201
@@ -139,8 +143,12 @@
#define CLK_ACLK_BUS1_400 225
#define CLK_ACLK_IMEM_200 226
#define CLK_ACLK_IMEM_266 227
+#define CLK_SCLK_PCIE_100_FSYS 228
+#define CLK_SCLK_UFSUNIPRO_FSYS 229
+#define CLK_SCLK_USBHOST30_FSYS 230
+#define CLK_SCLK_USBDRD30_FSYS 231
-#define TOP_NR_CLK 228
+#define TOP_NR_CLK 232
/* CMU_CPIF */
#define CLK_FOUT_MPHY_PLL 1
@@ -473,6 +481,39 @@
#define CLK_MOUT_SCLK_MMC2_USER 2
#define CLK_MOUT_SCLK_MMC1_USER 3
#define CLK_MOUT_SCLK_MMC0_USER 4
+#define CLK_MOUT_SCLK_UFS_MPHY_USER 5
+#define CLK_MOUT_SCLK_PCIE_100_USER 6
+#define CLK_MOUT_SCLK_UFSUNIPRO_USER 7
+#define CLK_MOUT_SCLK_USBHOST30_USER 8
+#define CLK_MOUT_SCLK_USBDRD30_USER 9
+#define CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER 10
+#define CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER 11
+#define CLK_MOUT_PHYCLK_USBHOST20_PHY_HSIC1_USER 12
+#define CLK_MOUT_PHYCLK_USBHOST20_PHY_CLK48MOHCI_USER 13
+#define CLK_MOUT_PHYCLK_USBHOST20_PHY_PHYCLOCK_USER 14
+#define CLK_MOUT_PHYCLK_USBHOST20_PHY_PHY_FREECLK_USER 15
+#define CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER 16
+#define CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER 17
+#define CLK_MOUT_PHYCLK_UFS_RX1_SYMBOL_USER 18
+#define CLK_MOUT_PHYCLK_UFS_RX0_SYMBOL_USER 19
+#define CLK_MOUT_PHYCLK_UFS_TX1_SYMBOL_USER 20
+#define CLK_MOUT_PHYCLK_UFS_TX0_SYMBOL_USER 21
+#define CLK_MOUT_PHYCLK_LLI_MPHY_TO_UFS_USER 22
+#define CLK_MOUT_SCLK_MPHY 23
+
+#define CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY 25
+#define CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY 26
+#define CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY 27
+#define CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY 28
+#define CLK_PHYCLK_USBHOST20_PHY_FREECLK_PHY 29
+#define CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK_PHY 30
+#define CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI_PHY 31
+#define CLK_PHYCLK_USBHOST20_PHY_HSIC1_PHY 32
+#define CLK_PHYCLK_UFS_TX0_SYMBOL_PHY 33
+#define CLK_PHYCLK_UFS_RX0_SYMBOL_PHY 34
+#define CLK_PHYCLK_UFS_TX1_SYMBOL_PHY 35
+#define CLK_PHYCLK_UFS_RX1_SYMBOL_PHY 36
+#define CLK_PHYCLK_LLI_MPHY_TO_UFS_PHY 37
#define CLK_ACLK_PCIE 50
#define CLK_ACLK_PDMA1 51
@@ -490,8 +531,57 @@
#define CLK_SCLK_MMC0 63
#define CLK_PDMA1 64
#define CLK_PDMA0 65
-
-#define FSYS_NR_CLK 66
+#define CLK_ACLK_XIU_FSYSPX 66
+#define CLK_ACLK_AHB_USBLINKH1 67
+#define CLK_ACLK_SMMU_PDMA1 68
+#define CLK_ACLK_BTS_PCIE 69
+#define CLK_ACLK_AXIUS_PDMA1 70
+#define CLK_ACLK_SMMU_PDMA0 71
+#define CLK_ACLK_BTS_UFS 72
+#define CLK_ACLK_BTS_USBHOST30 73
+#define CLK_ACLK_BTS_USBDRD30 74
+#define CLK_ACLK_AXIUS_PDMA0 75
+#define CLK_ACLK_AXIUS_USBHS 76
+#define CLK_ACLK_AXIUS_FSYSSX 77
+#define CLK_ACLK_AHB2APB_FSYSP 78
+#define CLK_ACLK_AHB2AXI_USBHS 79
+#define CLK_ACLK_AHB_USBLINKH0 80
+#define CLK_ACLK_AHB_USBHS 81
+#define CLK_ACLK_AHB_FSYSH 82
+#define CLK_ACLK_XIU_FSYSX 83
+#define CLK_ACLK_XIU_FSYSSX 84
+#define CLK_ACLK_FSYSNP_200 85
+#define CLK_ACLK_FSYSND_200 86
+#define CLK_PCLK_PCIE_CTRL 87
+#define CLK_PCLK_SMMU_PDMA1 88
+#define CLK_PCLK_PCIE_PHY 89
+#define CLK_PCLK_BTS_PCIE 90
+#define CLK_PCLK_SMMU_PDMA0 91
+#define CLK_PCLK_BTS_UFS 92
+#define CLK_PCLK_BTS_USBHOST30 93
+#define CLK_PCLK_BTS_USBDRD30 94
+#define CLK_PCLK_GPIO_FSYS 95
+#define CLK_PCLK_PMU_FSYS 96
+#define CLK_PCLK_SYSREG_FSYS 97
+#define CLK_SCLK_PCIE_100 98
+#define CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK 99
+#define CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK 100
+#define CLK_PHYCLK_UFS_RX1_SYMBOL 101
+#define CLK_PHYCLK_UFS_RX0_SYMBOL 102
+#define CLK_PHYCLK_UFS_TX1_SYMBOL 103
+#define CLK_PHYCLK_UFS_TX0_SYMBOL 104
+#define CLK_PHYCLK_USBHOST20_PHY_HSIC1 105
+#define CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI 106
+#define CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK 107
+#define CLK_PHYCLK_USBHOST20_PHY_FREECLK 108
+#define CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK 109
+#define CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK 110
+#define CLK_SCLK_MPHY 111
+#define CLK_SCLK_UFSUNIPRO 112
+#define CLK_SCLK_USBHOST30 113
+#define CLK_SCLK_USBDRD30 114
+
+#define FSYS_NR_CLK 115
/* CMU_G2D */
#define CLK_MUX_ACLK_G2D_266_USER 1
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* Re: [PATCH 10/12] clk: samsung: exynos5433: Add missing clocks for CMU_FSYS domain
2015-01-21 6:51 ` [PATCH 10/12] clk: samsung: exynos5433: Add missing clocks for CMU_FSYS domain Chanwoo Choi
@ 2015-01-21 6:56 ` Chanwoo Choi
0 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:56 UTC (permalink / raw)
To: s.nawrocki
Cc: Chanwoo Choi, tomasz.figa, mturquette, kgene, pankaj.dubey,
inki.dae, chanho61.park, sw0312.kim, linux-samsung-soc,
linux-kernel
Hi Sylwester,
I'm so sorry. I miss adding the version to patch[10-12].
- [PATCH 10/12] clk: samsung: exynos5433: Add missing clocks for CMU_FSYS domain
- [PATCH 11/12] clk: samsung: exynos5433: Add clocks for CMU_G3D domain
- [PATCH 12/12] clk: samsung: exynos5433: Add clocks for CMU_GSCL domain
Best Regards,
Chanwoo Choi
On 01/21/2015 03:51 PM, Chanwoo Choi wrote:
> This patch adds the mux/divider/gate clocks for CMU_FSYS domain which
> contains the clocks of USB/UFS/SDMMC/TSI/PDMA IPs.
>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Acked-by: Inki Dae <inki.dae@samsung.com>
> ---
> drivers/clk/samsung/clk-exynos5433.c | 302 +++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/exynos5433.h | 96 ++++++++++-
> 2 files changed, 395 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index e79edd7..fa39e6c 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -462,6 +462,16 @@ static struct samsung_div_clock top_div_clks[] __initdata = {
> DIV(CLK_DIV_SCLK_MMC2_A, "div_sclk_mmc2_a", "mout_sclk_mmc2_b",
> DIV_TOP_FSYS1, 0, 4),
>
> + /* DIV_TOP_FSYS2 */
> + DIV(CLK_DIV_SCLK_PCIE_100, "div_sclk_pcie_100", "mout_sclk_pcie_100",
> + DIV_TOP_FSYS2, 12, 3),
> + DIV(CLK_DIV_SCLK_USBHOST30, "div_sclk_usbhost30",
> + "mout_sclk_usbhost30", DIV_TOP_FSYS2, 8, 4),
> + DIV(CLK_DIV_SCLK_UFSUNIPRO, "div_sclk_ufsunipro",
> + "mout_sclk_ufsunipro", DIV_TOP_FSYS2, 4, 4),
> + DIV(CLK_DIV_SCLK_USBDRD30, "div_sclk_usbdrd30", "mout_sclk_usbdrd30",
> + DIV_TOP_FSYS2, 0, 4),
> +
> /* DIV_TOP_PERIC0 */
> DIV(CLK_DIV_SCLK_SPI1_B, "div_sclk_spi1_b", "div_sclk_spi1_a",
> DIV_TOP_PERIC0, 16, 8),
> @@ -543,12 +553,23 @@ static struct samsung_gate_clock top_gate_clks[] __initdata = {
> CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
>
> /* ENABLE_SCLK_TOP_FSYS */
> + GATE(CLK_SCLK_PCIE_100_FSYS, "sclk_pcie_100_fsys", "div_sclk_pcie_100",
> + ENABLE_SCLK_TOP_FSYS, 7, 0, 0),
> GATE(CLK_SCLK_MMC2_FSYS, "sclk_mmc2_fsys", "div_sclk_mmc2_b",
> ENABLE_SCLK_TOP_FSYS, 6, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_MMC1_FSYS, "sclk_mmc1_fsys", "div_sclk_mmc1_b",
> ENABLE_SCLK_TOP_FSYS, 5, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_MMC0_FSYS, "sclk_mmc0_fsys", "div_sclk_mmc0_b",
> ENABLE_SCLK_TOP_FSYS, 4, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_UFSUNIPRO_FSYS, "sclk_ufsunipro_fsys",
> + "div_sclk_ufsunipro", ENABLE_SCLK_TOP_FSYS,
> + 3, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_USBHOST30_FSYS, "sclk_usbhost30_fsys",
> + "div_sclk_usbhost30", ENABLE_SCLK_TOP_FSYS,
> + 1, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_USBDRD30_FSYS, "sclk_usbdrd30_fsys",
> + "div_sclk_usbdrd30", ENABLE_SCLK_TOP_FSYS,
> + 0, CLK_SET_RATE_PARENT, 0),
>
> /* ENABLE_SCLK_TOP_PERIC */
> GATE(CLK_SCLK_SPI4_PERIC, "sclk_spi4_peric", "div_sclk_spi4_b",
> @@ -1832,10 +1853,45 @@ CLK_OF_DECLARE(exynos5433_cmu_peris, "samsung,exynos5433-cmu-peris",
> #define ENABLE_IP_FSYS1 0x0b04
>
> /* list of all parent clock list */
> +PNAME(mout_sclk_ufs_mphy_user_p) = { "fin_pll", "sclk_ufs_mphy", };
> PNAME(mout_aclk_fsys_200_user_p) = { "fin_pll", "div_aclk_fsys_200", };
> +PNAME(mout_sclk_pcie_100_user_p) = { "fin_pll", "sclk_pcie_100_fsys",};
> +PNAME(mout_sclk_ufsunipro_user_p) = { "fin_pll", "sclk_ufsunipro_fsys",};
> PNAME(mout_sclk_mmc2_user_p) = { "fin_pll", "sclk_mmc2_fsys", };
> PNAME(mout_sclk_mmc1_user_p) = { "fin_pll", "sclk_mmc1_fsys", };
> PNAME(mout_sclk_mmc0_user_p) = { "fin_pll", "sclk_mmc0_fsys", };
> +PNAME(mout_sclk_usbhost30_user_p) = { "fin_pll", "sclk_usbhost30_fsys",};
> +PNAME(mout_sclk_usbdrd30_user_p) = { "fin_pll", "sclk_usbdrd30_fsys", };
> +
> +PNAME(mout_phyclk_usbhost30_uhost30_pipe_pclk_user_p)
> + = { "fin_pll", "phyclk_usbhost30_uhost30_pipe_pclk_phy", };
> +PNAME(mout_phyclk_usbhost30_uhost30_phyclock_user_p)
> + = { "fin_pll", "phyclk_usbhost30_uhost30_phyclock_phy", };
> +PNAME(mout_phyclk_usbhost20_phy_hsic1_p)
> + = { "fin_pll", "phyclk_usbhost20_phy_hsic1_phy", };
> +PNAME(mout_phyclk_usbhost20_phy_clk48mohci_user_p)
> + = { "fin_pll", "phyclk_usbhost20_phy_clk48mohci_phy", };
> +PNAME(mout_phyclk_usbhost20_phy_phyclock_user_p)
> + = { "fin_pll", "phyclk_usbhost20_phy_phyclock_phy", };
> +PNAME(mout_phyclk_usbhost20_phy_freeclk_user_p)
> + = { "fin_pll", "phyclk_usbhost20_phy_freeclk_phy", };
> +PNAME(mout_phyclk_usbdrd30_udrd30_pipe_pclk_p)
> + = { "fin_pll", "phyclk_usbdrd30_udrd30_pipe_pclk_phy", };
> +PNAME(mout_phyclk_usbdrd30_udrd30_phyclock_user_p)
> + = { "fin_pll", "phyclk_usbdrd30_udrd30_phyclock_phy", };
> +PNAME(mout_phyclk_ufs_rx1_symbol_user_p)
> + = { "fin_pll", "phyclk_ufs_rx1_symbol_phy", };
> +PNAME(mout_phyclk_ufs_rx0_symbol_user_p)
> + = { "fin_pll", "phyclk_ufs_rx0_symbol_phy", };
> +PNAME(mout_phyclk_ufs_tx1_symbol_user_p)
> + = { "fin_pll", "phyclk_ufs_tx1_symbol_phy", };
> +PNAME(mout_phyclk_ufs_tx0_symbol_user_p)
> + = { "fin_pll", "phyclk_ufs_tx0_symbol_phy", };
> +PNAME(mout_phyclk_lli_mphy_to_ufs_user_p)
> + = { "fin_pll", "phyclk_lli_mphy_to_ufs_phy", };
> +PNAME(mout_sclk_mphy_p)
> + = { "mout_sclk_ufs_mphy_user",
> + "mout_phyclk_lli_mphy_to_ufs_user", };
>
> static unsigned long fsys_clk_regs[] __initdata = {
> MUX_SEL_FSYS0,
> @@ -1863,18 +1919,130 @@ static unsigned long fsys_clk_regs[] __initdata = {
> ENABLE_IP_FSYS1,
> };
>
> +static struct samsung_fixed_rate_clock fsys_fixed_clks[] __initdata = {
> + /* PHY clocks from USBDRD30_PHY */
> + FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY,
> + "phyclk_usbdrd30_udrd30_phyclock_phy", NULL,
> + CLK_IS_ROOT, 60000000),
> + FRATE(CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY,
> + "phyclk_usbdrd30_udrd30_pipe_pclk_phy", NULL,
> + CLK_IS_ROOT, 125000000),
> + /* PHY clocks from USBHOST30_PHY */
> + FRATE(CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY,
> + "phyclk_usbhost30_uhost30_phyclock_phy", NULL,
> + CLK_IS_ROOT, 60000000),
> + FRATE(CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY,
> + "phyclk_usbhost30_uhost30_pipe_pclk_phy", NULL,
> + CLK_IS_ROOT, 125000000),
> + /* PHY clocks from USBHOST20_PHY */
> + FRATE(CLK_PHYCLK_USBHOST20_PHY_FREECLK_PHY,
> + "phyclk_usbhost20_phy_freeclk_phy", NULL, CLK_IS_ROOT,
> + 60000000),
> + FRATE(CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK_PHY,
> + "phyclk_usbhost20_phy_phyclock_phy", NULL, CLK_IS_ROOT,
> + 60000000),
> + FRATE(CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI_PHY,
> + "phyclk_usbhost20_phy_clk48mohci_phy", NULL,
> + CLK_IS_ROOT, 48000000),
> + FRATE(CLK_PHYCLK_USBHOST20_PHY_HSIC1_PHY,
> + "phyclk_usbhost20_phy_hsic1_phy", NULL, CLK_IS_ROOT,
> + 60000000),
> + /* PHY clocks from UFS_PHY */
> + FRATE(CLK_PHYCLK_UFS_TX0_SYMBOL_PHY, "phyclk_ufs_tx0_symbol_phy",
> + NULL, CLK_IS_ROOT, 300000000),
> + FRATE(CLK_PHYCLK_UFS_RX0_SYMBOL_PHY, "phyclk_ufs_rx0_symbol_phy",
> + NULL, CLK_IS_ROOT, 300000000),
> + FRATE(CLK_PHYCLK_UFS_TX1_SYMBOL_PHY, "phyclk_ufs_tx1_symbol_phy",
> + NULL, CLK_IS_ROOT, 300000000),
> + FRATE(CLK_PHYCLK_UFS_RX1_SYMBOL_PHY, "phyclk_ufs_rx1_symbol_phy",
> + NULL, CLK_IS_ROOT, 300000000),
> + /* PHY clocks from LLI_PHY */
> + FRATE(CLK_PHYCLK_LLI_MPHY_TO_UFS_PHY, "phyclk_lli_mphy_to_ufs_phy",
> + NULL, CLK_IS_ROOT, 26000000),
> +};
> +
> static struct samsung_mux_clock fsys_mux_clks[] __initdata = {
> /* MUX_SEL_FSYS0 */
> + MUX(CLK_MOUT_SCLK_UFS_MPHY_USER, "mout_sclk_ufs_mphy_user",
> + mout_sclk_ufs_mphy_user_p, MUX_SEL_FSYS0, 4, 1),
> MUX(CLK_MOUT_ACLK_FSYS_200_USER, "mout_aclk_fsys_200_user",
> mout_aclk_fsys_200_user_p, MUX_SEL_FSYS0, 0, 1),
>
> /* MUX_SEL_FSYS1 */
> + MUX(CLK_MOUT_SCLK_PCIE_100_USER, "mout_sclk_pcie_100_user",
> + mout_sclk_pcie_100_user_p, MUX_SEL_FSYS1, 28, 1),
> + MUX(CLK_MOUT_SCLK_UFSUNIPRO_USER, "mout_sclk_ufsunipro_user",
> + mout_sclk_ufsunipro_user_p, MUX_SEL_FSYS1, 24, 1),
> MUX(CLK_MOUT_SCLK_MMC2_USER, "mout_sclk_mmc2_user",
> mout_sclk_mmc2_user_p, MUX_SEL_FSYS1, 20, 1),
> MUX(CLK_MOUT_SCLK_MMC1_USER, "mout_sclk_mmc1_user",
> mout_sclk_mmc1_user_p, MUX_SEL_FSYS1, 16, 1),
> MUX(CLK_MOUT_SCLK_MMC0_USER, "mout_sclk_mmc0_user",
> mout_sclk_mmc0_user_p, MUX_SEL_FSYS1, 12, 1),
> + MUX(CLK_MOUT_SCLK_USBHOST30_USER, "mout_sclk_usbhost30_user",
> + mout_sclk_usbhost30_user_p, MUX_SEL_FSYS1, 4, 1),
> + MUX(CLK_MOUT_SCLK_USBDRD30_USER, "mout_sclk_usbdrd30_user",
> + mout_sclk_usbdrd30_user_p, MUX_SEL_FSYS1, 0, 1),
> +
> + /* MUX_SEL_FSYS2 */
> + MUX(CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER,
> + "mout_phyclk_usbhost30_uhost30_pipe_pclk_user",
> + mout_phyclk_usbhost30_uhost30_pipe_pclk_user_p,
> + MUX_SEL_FSYS2, 28, 1),
> + MUX(CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER,
> + "mout_phyclk_usbhost30_uhost30_phyclock_user",
> + mout_phyclk_usbhost30_uhost30_phyclock_user_p,
> + MUX_SEL_FSYS2, 24, 1),
> + MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_HSIC1_USER,
> + "mout_phyclk_usbhost20_phy_hsic1",
> + mout_phyclk_usbhost20_phy_hsic1_p,
> + MUX_SEL_FSYS2, 20, 1),
> + MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_CLK48MOHCI_USER,
> + "mout_phyclk_usbhost20_phy_clk48mohci_user",
> + mout_phyclk_usbhost20_phy_clk48mohci_user_p,
> + MUX_SEL_FSYS2, 16, 1),
> + MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_PHYCLOCK_USER,
> + "mout_phyclk_usbhost20_phy_phyclock_user",
> + mout_phyclk_usbhost20_phy_phyclock_user_p,
> + MUX_SEL_FSYS2, 12, 1),
> + MUX(CLK_MOUT_PHYCLK_USBHOST20_PHY_PHY_FREECLK_USER,
> + "mout_phyclk_usbhost20_phy_freeclk_user",
> + mout_phyclk_usbhost20_phy_freeclk_user_p,
> + MUX_SEL_FSYS2, 8, 1),
> + MUX(CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER,
> + "mout_phyclk_usbdrd30_udrd30_pipe_pclk_user",
> + mout_phyclk_usbdrd30_udrd30_pipe_pclk_p,
> + MUX_SEL_FSYS2, 4, 1),
> + MUX(CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER,
> + "mout_phyclk_usbdrd30_udrd30_phyclock_user",
> + mout_phyclk_usbdrd30_udrd30_phyclock_user_p,
> + MUX_SEL_FSYS2, 0, 1),
> +
> + /* MUX_SEL_FSYS3 */
> + MUX(CLK_MOUT_PHYCLK_UFS_RX1_SYMBOL_USER,
> + "mout_phyclk_ufs_rx1_symbol_user",
> + mout_phyclk_ufs_rx1_symbol_user_p,
> + MUX_SEL_FSYS3, 16, 1),
> + MUX(CLK_MOUT_PHYCLK_UFS_RX0_SYMBOL_USER,
> + "mout_phyclk_ufs_rx0_symbol_user",
> + mout_phyclk_ufs_rx0_symbol_user_p,
> + MUX_SEL_FSYS3, 12, 1),
> + MUX(CLK_MOUT_PHYCLK_UFS_TX1_SYMBOL_USER,
> + "mout_phyclk_ufs_tx1_symbol_user",
> + mout_phyclk_ufs_tx1_symbol_user_p,
> + MUX_SEL_FSYS3, 8, 1),
> + MUX(CLK_MOUT_PHYCLK_UFS_TX0_SYMBOL_USER,
> + "mout_phyclk_ufs_tx0_symbol_user",
> + mout_phyclk_ufs_tx0_symbol_user_p,
> + MUX_SEL_FSYS3, 4, 1),
> + MUX(CLK_MOUT_PHYCLK_LLI_MPHY_TO_UFS_USER,
> + "mout_phyclk_lli_mphy_to_ufs_user",
> + mout_phyclk_lli_mphy_to_ufs_user_p,
> + MUX_SEL_FSYS3, 0, 1),
> +
> + /* MUX_SEL_FSYS4 */
> + MUX(CLK_MOUT_SCLK_MPHY, "mout_sclk_mphy", mout_sclk_mphy_p,
> + MUX_SEL_FSYS4, 0, 1),
> };
>
> static struct samsung_gate_clock fsys_gate_clks[] __initdata = {
> @@ -1902,13 +2070,145 @@ static struct samsung_gate_clock fsys_gate_clks[] __initdata = {
> GATE(CLK_ACLK_PDMA0, "aclk_pdma0", "mout_aclk_fsys_200_user",
> ENABLE_ACLK_FSYS0, 0, CLK_IGNORE_UNUSED, 0),
>
> + /* ENABLE_ACLK_FSYS1 */
> + GATE(CLK_ACLK_XIU_FSYSPX, "aclk_xiu_fsyspx", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 27, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AHB_USBLINKH1, "aclk_ahb_usblinkh1",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 26, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_SMMU_PDMA1, "aclk_smmu_pdma1", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 25, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_BTS_PCIE, "aclk_bts_pcie", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 24, 0, 0),
> + GATE(CLK_ACLK_AXIUS_PDMA1, "aclk_axius_pdma1",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 22, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_SMMU_PDMA0, "aclk_smmu_pdma0", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 17, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_BTS_UFS, "aclk_bts_ufs", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 14, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_BTS_USBHOST30, "aclk_bts_usbhost30",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 13, 0, 0),
> + GATE(CLK_ACLK_BTS_USBDRD30, "aclk_bts_usbdrd30",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 12, 0, 0),
> + GATE(CLK_ACLK_AXIUS_PDMA0, "aclk_axius_pdma0",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 11, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AXIUS_USBHS, "aclk_axius_usbhs",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 10, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AXIUS_FSYSSX, "aclk_axius_fsyssx",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 9, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AHB2APB_FSYSP, "aclk_ahb2apb_fsysp",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 8, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AHB2AXI_USBHS, "aclk_ahb2axi_usbhs",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 7, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AHB_USBLINKH0, "aclk_ahb_usblinkh0",
> + "mout_aclk_fsys_200_user", ENABLE_ACLK_FSYS1,
> + 6, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AHB_USBHS, "aclk_ahb_usbhs", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 5, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_AHB_FSYSH, "aclk_ahb_fsysh", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 4, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_XIU_FSYSX, "aclk_xiu_fsysx", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 3, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_XIU_FSYSSX, "aclk_xiu_fsyssx", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 2, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_FSYSNP_200, "aclk_fsysnp_200", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 1, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_ACLK_FSYSND_200, "aclk_fsysnd_200", "mout_aclk_fsys_200_user",
> + ENABLE_ACLK_FSYS1, 0, CLK_IGNORE_UNUSED, 0),
> +
> + /* ENABLE_PCLK_FSYS */
> + GATE(CLK_PCLK_PCIE_CTRL, "pclk_pcie_ctrl", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 17, 0, 0),
> + GATE(CLK_PCLK_SMMU_PDMA1, "pclk_smmu_pdma1", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 16, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_PCLK_PCIE_PHY, "pclk_pcie_phy", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 14, 0, 0),
> + GATE(CLK_PCLK_BTS_PCIE, "pclk_bts_pcie", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 13, 0, 0),
> + GATE(CLK_PCLK_SMMU_PDMA0, "pclk_smmu_pdma0", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 8, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_PCLK_BTS_UFS, "pclk_bts_ufs", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 5, 0, 0),
> + GATE(CLK_PCLK_BTS_USBHOST30, "pclk_bts_usbhost30",
> + "mout_aclk_fsys_200_user", ENABLE_PCLK_FSYS, 4, 0, 0),
> + GATE(CLK_PCLK_BTS_USBDRD30, "pclk_bts_usbdrd30",
> + "mout_aclk_fsys_200_user", ENABLE_PCLK_FSYS, 3, 0, 0),
> + GATE(CLK_PCLK_GPIO_FSYS, "pclk_gpio_fsys", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 2, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_PCLK_PMU_FSYS, "pclk_pmu_fsys", "mout_aclk_fsys_200_user",
> + ENABLE_PCLK_FSYS, 1, CLK_IGNORE_UNUSED, 0),
> + GATE(CLK_PCLK_SYSREG_FSYS, "pclk_sysreg_fsys",
> + "mout_aclk_fsys_200_user", ENABLE_PCLK_FSYS,
> + 0, CLK_IGNORE_UNUSED, 0),
> +
> /* ENABLE_SCLK_FSYS */
> + GATE(CLK_SCLK_PCIE_100, "sclk_pcie_100", "mout_sclk_pcie_100_user",
> + ENABLE_SCLK_FSYS, 21, 0, 0),
> + GATE(CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK,
> + "phyclk_usbhost30_uhost30_pipe_pclk",
> + "mout_phyclk_usbhost30_uhost30_pipe_pclk_user",
> + ENABLE_SCLK_FSYS, 18, 0, 0),
> + GATE(CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK,
> + "phyclk_usbhost30_uhost30_phyclock",
> + "mout_phyclk_usbhost30_uhost30_phyclock_user",
> + ENABLE_SCLK_FSYS, 17, 0, 0),
> + GATE(CLK_PHYCLK_UFS_RX1_SYMBOL, "phyclk_ufs_rx1_symbol",
> + "mout_phyclk_ufs_rx1_symbol_user", ENABLE_SCLK_FSYS,
> + 16, 0, 0),
> + GATE(CLK_PHYCLK_UFS_RX0_SYMBOL, "phyclk_ufs_rx0_symbol",
> + "mout_phyclk_ufs_rx0_symbol_user", ENABLE_SCLK_FSYS,
> + 15, 0, 0),
> + GATE(CLK_PHYCLK_UFS_TX1_SYMBOL, "phyclk_ufs_tx1_symbol",
> + "mout_phyclk_ufs_tx1_symbol_user", ENABLE_SCLK_FSYS,
> + 14, 0, 0),
> + GATE(CLK_PHYCLK_UFS_TX0_SYMBOL, "phyclk_ufs_tx0_symbol",
> + "mout_phyclk_ufs_tx0_symbol_user", ENABLE_SCLK_FSYS,
> + 13, 0, 0),
> + GATE(CLK_PHYCLK_USBHOST20_PHY_HSIC1, "phyclk_usbhost20_phy_hsic1",
> + "mout_phyclk_usbhost20_phy_hsic1", ENABLE_SCLK_FSYS,
> + 12, 0, 0),
> + GATE(CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI,
> + "phyclk_usbhost20_phy_clk48mohci",
> + "mout_phyclk_usbhost20_phy_clk48mohci_user",
> + ENABLE_SCLK_FSYS, 11, 0, 0),
> + GATE(CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK,
> + "phyclk_usbhost20_phy_phyclock",
> + "mout_phyclk_usbhost20_phy_phyclock_user",
> + ENABLE_SCLK_FSYS, 10, 0, 0),
> + GATE(CLK_PHYCLK_USBHOST20_PHY_FREECLK,
> + "phyclk_usbhost20_phy_freeclk",
> + "mout_phyclk_usbhost20_phy_freeclk_user",
> + ENABLE_SCLK_FSYS, 9, 0, 0),
> + GATE(CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK,
> + "phyclk_usbdrd30_udrd30_pipe_pclk",
> + "mout_phyclk_usbdrd30_udrd30_pipe_pclk_user",
> + ENABLE_SCLK_FSYS, 8, 0, 0),
> + GATE(CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK,
> + "phyclk_usbdrd30_udrd30_phyclock",
> + "mout_phyclk_usbdrd30_udrd30_phyclock_user",
> + ENABLE_SCLK_FSYS, 7, 0, 0),
> + GATE(CLK_SCLK_MPHY, "sclk_mphy", "mout_sclk_mphy",
> + ENABLE_SCLK_FSYS, 6, 0, 0),
> + GATE(CLK_SCLK_UFSUNIPRO, "sclk_ufsunipro", "mout_sclk_ufsunipro_user",
> + ENABLE_SCLK_FSYS, 5, 0, 0),
> GATE(CLK_SCLK_MMC2, "sclk_mmc2", "mout_sclk_mmc2_user",
> ENABLE_SCLK_FSYS, 4, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_MMC1, "sclk_mmc1", "mout_sclk_mmc1_user",
> ENABLE_SCLK_FSYS, 3, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_MMC0, "sclk_mmc0", "mout_sclk_mmc0_user",
> ENABLE_SCLK_FSYS, 2, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_USBHOST30, "sclk_usbhost30", "mout_sclk_usbhost30_user",
> + ENABLE_SCLK_FSYS, 1, 0, 0),
> + GATE(CLK_SCLK_USBDRD30, "sclk_usbdrd30", "mout_sclk_usbdrd30_user",
> + ENABLE_SCLK_FSYS, 0, 0, 0),
>
> /* ENABLE_IP_FSYS0 */
> GATE(CLK_PDMA1, "pdma1", "aclk_pdma1", ENABLE_IP_FSYS0, 15, 0, 0),
> @@ -1920,6 +2220,8 @@ static struct samsung_cmu_info fsys_cmu_info __initdata = {
> .nr_mux_clks = ARRAY_SIZE(fsys_mux_clks),
> .gate_clks = fsys_gate_clks,
> .nr_gate_clks = ARRAY_SIZE(fsys_gate_clks),
> + .fixed_clks = fsys_fixed_clks,
> + .nr_fixed_clks = ARRAY_SIZE(fsys_fixed_clks),
> .nr_clk_ids = FSYS_NR_CLK,
> .clk_regs = fsys_clk_regs,
> .nr_clk_regs = ARRAY_SIZE(fsys_clk_regs),
> diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
> index 6bc7f51..bd445d2 100644
> --- a/include/dt-bindings/clock/exynos5433.h
> +++ b/include/dt-bindings/clock/exynos5433.h
> @@ -110,6 +110,10 @@
> #define CLK_DIV_ACLK_G3D_400 137
> #define CLK_DIV_ACLK_BUS0_400 138
> #define CLK_DIV_ACLK_BUS1_400 139
> +#define CLK_DIV_SCLK_PCIE_100 140
> +#define CLK_DIV_SCLK_USBHOST30 141
> +#define CLK_DIV_SCLK_UFSUNIPRO 142
> +#define CLK_DIV_SCLK_USBDRD30 143
>
> #define CLK_ACLK_PERIC_66 200
> #define CLK_ACLK_PERIS_66 201
> @@ -139,8 +143,12 @@
> #define CLK_ACLK_BUS1_400 225
> #define CLK_ACLK_IMEM_200 226
> #define CLK_ACLK_IMEM_266 227
> +#define CLK_SCLK_PCIE_100_FSYS 228
> +#define CLK_SCLK_UFSUNIPRO_FSYS 229
> +#define CLK_SCLK_USBHOST30_FSYS 230
> +#define CLK_SCLK_USBDRD30_FSYS 231
>
> -#define TOP_NR_CLK 228
> +#define TOP_NR_CLK 232
>
> /* CMU_CPIF */
> #define CLK_FOUT_MPHY_PLL 1
> @@ -473,6 +481,39 @@
> #define CLK_MOUT_SCLK_MMC2_USER 2
> #define CLK_MOUT_SCLK_MMC1_USER 3
> #define CLK_MOUT_SCLK_MMC0_USER 4
> +#define CLK_MOUT_SCLK_UFS_MPHY_USER 5
> +#define CLK_MOUT_SCLK_PCIE_100_USER 6
> +#define CLK_MOUT_SCLK_UFSUNIPRO_USER 7
> +#define CLK_MOUT_SCLK_USBHOST30_USER 8
> +#define CLK_MOUT_SCLK_USBDRD30_USER 9
> +#define CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER 10
> +#define CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER 11
> +#define CLK_MOUT_PHYCLK_USBHOST20_PHY_HSIC1_USER 12
> +#define CLK_MOUT_PHYCLK_USBHOST20_PHY_CLK48MOHCI_USER 13
> +#define CLK_MOUT_PHYCLK_USBHOST20_PHY_PHYCLOCK_USER 14
> +#define CLK_MOUT_PHYCLK_USBHOST20_PHY_PHY_FREECLK_USER 15
> +#define CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER 16
> +#define CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER 17
> +#define CLK_MOUT_PHYCLK_UFS_RX1_SYMBOL_USER 18
> +#define CLK_MOUT_PHYCLK_UFS_RX0_SYMBOL_USER 19
> +#define CLK_MOUT_PHYCLK_UFS_TX1_SYMBOL_USER 20
> +#define CLK_MOUT_PHYCLK_UFS_TX0_SYMBOL_USER 21
> +#define CLK_MOUT_PHYCLK_LLI_MPHY_TO_UFS_USER 22
> +#define CLK_MOUT_SCLK_MPHY 23
> +
> +#define CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY 25
> +#define CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY 26
> +#define CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY 27
> +#define CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY 28
> +#define CLK_PHYCLK_USBHOST20_PHY_FREECLK_PHY 29
> +#define CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK_PHY 30
> +#define CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI_PHY 31
> +#define CLK_PHYCLK_USBHOST20_PHY_HSIC1_PHY 32
> +#define CLK_PHYCLK_UFS_TX0_SYMBOL_PHY 33
> +#define CLK_PHYCLK_UFS_RX0_SYMBOL_PHY 34
> +#define CLK_PHYCLK_UFS_TX1_SYMBOL_PHY 35
> +#define CLK_PHYCLK_UFS_RX1_SYMBOL_PHY 36
> +#define CLK_PHYCLK_LLI_MPHY_TO_UFS_PHY 37
>
> #define CLK_ACLK_PCIE 50
> #define CLK_ACLK_PDMA1 51
> @@ -490,8 +531,57 @@
> #define CLK_SCLK_MMC0 63
> #define CLK_PDMA1 64
> #define CLK_PDMA0 65
> -
> -#define FSYS_NR_CLK 66
> +#define CLK_ACLK_XIU_FSYSPX 66
> +#define CLK_ACLK_AHB_USBLINKH1 67
> +#define CLK_ACLK_SMMU_PDMA1 68
> +#define CLK_ACLK_BTS_PCIE 69
> +#define CLK_ACLK_AXIUS_PDMA1 70
> +#define CLK_ACLK_SMMU_PDMA0 71
> +#define CLK_ACLK_BTS_UFS 72
> +#define CLK_ACLK_BTS_USBHOST30 73
> +#define CLK_ACLK_BTS_USBDRD30 74
> +#define CLK_ACLK_AXIUS_PDMA0 75
> +#define CLK_ACLK_AXIUS_USBHS 76
> +#define CLK_ACLK_AXIUS_FSYSSX 77
> +#define CLK_ACLK_AHB2APB_FSYSP 78
> +#define CLK_ACLK_AHB2AXI_USBHS 79
> +#define CLK_ACLK_AHB_USBLINKH0 80
> +#define CLK_ACLK_AHB_USBHS 81
> +#define CLK_ACLK_AHB_FSYSH 82
> +#define CLK_ACLK_XIU_FSYSX 83
> +#define CLK_ACLK_XIU_FSYSSX 84
> +#define CLK_ACLK_FSYSNP_200 85
> +#define CLK_ACLK_FSYSND_200 86
> +#define CLK_PCLK_PCIE_CTRL 87
> +#define CLK_PCLK_SMMU_PDMA1 88
> +#define CLK_PCLK_PCIE_PHY 89
> +#define CLK_PCLK_BTS_PCIE 90
> +#define CLK_PCLK_SMMU_PDMA0 91
> +#define CLK_PCLK_BTS_UFS 92
> +#define CLK_PCLK_BTS_USBHOST30 93
> +#define CLK_PCLK_BTS_USBDRD30 94
> +#define CLK_PCLK_GPIO_FSYS 95
> +#define CLK_PCLK_PMU_FSYS 96
> +#define CLK_PCLK_SYSREG_FSYS 97
> +#define CLK_SCLK_PCIE_100 98
> +#define CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK 99
> +#define CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK 100
> +#define CLK_PHYCLK_UFS_RX1_SYMBOL 101
> +#define CLK_PHYCLK_UFS_RX0_SYMBOL 102
> +#define CLK_PHYCLK_UFS_TX1_SYMBOL 103
> +#define CLK_PHYCLK_UFS_TX0_SYMBOL 104
> +#define CLK_PHYCLK_USBHOST20_PHY_HSIC1 105
> +#define CLK_PHYCLK_USBHOST20_PHY_CLK48MOHCI 106
> +#define CLK_PHYCLK_USBHOST20_PHY_PHYCLOCK 107
> +#define CLK_PHYCLK_USBHOST20_PHY_FREECLK 108
> +#define CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK 109
> +#define CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK 110
> +#define CLK_SCLK_MPHY 111
> +#define CLK_SCLK_UFSUNIPRO 112
> +#define CLK_SCLK_USBHOST30 113
> +#define CLK_SCLK_USBDRD30 114
> +
> +#define FSYS_NR_CLK 115
>
> /* CMU_G2D */
> #define CLK_MUX_ACLK_G2D_266_USER 1
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH 11/12] clk: samsung: exynos5433: Add clocks for CMU_G3D domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (9 preceding siblings ...)
2015-01-21 6:51 ` [PATCH 10/12] clk: samsung: exynos5433: Add missing clocks for CMU_FSYS domain Chanwoo Choi
@ 2015-01-21 6:51 ` Chanwoo Choi
2015-01-21 6:52 ` [PATCH 12/12] clk: samsung: exynos5433: Add clocks for CMU_GSCL domain Chanwoo Choi
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:51 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the mux/divider/gate clocks for CMU_G3D domain which contains
the clocks for GPU(3D Graphics Engine).
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 8 ++
drivers/clk/samsung/clk-exynos5433.c | 127 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 25 ++++
3 files changed, 160 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 03ae40a..589ed93 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -28,6 +28,8 @@ Required Properties:
- "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
which generates global data buses clock and global peripheral buses clock.
+ - "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D
+ which generates clocks for 3D Graphics Engine IP.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -115,6 +117,12 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_g3d: clock-controller@0x14aa0000 {
+ compatible = "samsung,exynos5433-cmu-g3d";
+ reg = <0x14aa0000 0x1000>;
+ #clock-cells = <1>;
+ };
+
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index fa39e6c..27dda68 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -3120,3 +3120,130 @@ CLK_OF_DECLARE(exynos5433_cmu_bus##id, \
exynos5433_cmu_bus_init(0);
exynos5433_cmu_bus_init(1);
exynos5433_cmu_bus_init(2);
+
+/*
+ * Register offset definitions for CMU_G3D
+ */
+#define G3D_PLL_LOCK 0x0000
+#define G3D_PLL_CON0 0x0100
+#define G3D_PLL_CON1 0x0104
+#define G3D_PLL_FREQ_DET 0x010c
+#define MUX_SEL_G3D 0x0200
+#define MUX_ENABLE_G3D 0x0300
+#define MUX_STAT_G3D 0x0400
+#define DIV_G3D 0x0600
+#define DIV_G3D_PLL_FREQ_DET 0x0604
+#define DIV_STAT_G3D 0x0700
+#define DIV_STAT_G3D_PLL_FREQ_DET 0x0704
+#define ENABLE_ACLK_G3D 0x0800
+#define ENABLE_PCLK_G3D 0x0900
+#define ENABLE_SCLK_G3D 0x0a00
+#define ENABLE_IP_G3D0 0x0b00
+#define ENABLE_IP_G3D1 0x0b04
+#define CLKOUT_CMU_G3D 0x0c00
+#define CLKOUT_CMU_G3D_DIV_STAT 0x0c04
+#define CLK_STOPCTRL 0x1000
+
+static unsigned long g3d_clk_regs[] __initdata = {
+ G3D_PLL_LOCK,
+ G3D_PLL_CON0,
+ G3D_PLL_CON1,
+ G3D_PLL_FREQ_DET,
+ MUX_SEL_G3D,
+ MUX_ENABLE_G3D,
+ MUX_STAT_G3D,
+ DIV_G3D,
+ DIV_G3D_PLL_FREQ_DET,
+ DIV_STAT_G3D,
+ DIV_STAT_G3D_PLL_FREQ_DET,
+ ENABLE_ACLK_G3D,
+ ENABLE_PCLK_G3D,
+ ENABLE_SCLK_G3D,
+ ENABLE_IP_G3D0,
+ ENABLE_IP_G3D1,
+ CLKOUT_CMU_G3D,
+ CLKOUT_CMU_G3D_DIV_STAT,
+ CLK_STOPCTRL,
+};
+
+/* list of all parent clock list */
+PNAME(mout_aclk_g3d_400_p) = { "mout_g3d_pll", "aclk_g3d_400", };
+PNAME(mout_g3d_pll_p) = { "fin_pll", "fout_g3d_pll", };
+
+static struct samsung_pll_clock g3d_pll_clks[] __initdata = {
+ PLL(pll_35xx, CLK_FOUT_G3D_PLL, "fout_g3d_pll", "fin_pll",
+ G3D_PLL_LOCK, G3D_PLL_CON0, exynos5443_pll_rates),
+};
+
+static struct samsung_mux_clock g3d_mux_clks[] __initdata = {
+ /* MUX_SEL_G3D */
+ MUX(CLK_MOUT_ACLK_G3D_400, "mout_aclk_g3d_400", mout_aclk_g3d_400_p,
+ MUX_SEL_G3D, 8, 1),
+ MUX(CLK_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p,
+ MUX_SEL_G3D, 0, 1),
+};
+
+static struct samsung_div_clock g3d_div_clks[] __initdata = {
+ /* DIV_G3D */
+ DIV(CLK_DIV_SCLK_HPM_G3D, "div_sclk_hpm_g3d", "mout_g3d_pll", DIV_G3D,
+ 8, 2),
+ DIV(CLK_DIV_PCLK_G3D, "div_pclk_g3d", "div_aclk_g3d", DIV_G3D,
+ 4, 3),
+ DIV(CLK_DIV_ACLK_G3D, "div_aclk_g3d", "mout_aclk_g3d_400", DIV_G3D,
+ 0, 3),
+};
+
+static struct samsung_gate_clock g3d_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_G3D */
+ GATE(CLK_ACLK_BTS_G3D1, "aclk_bts_g3d1", "div_aclk_g3d",
+ ENABLE_ACLK_G3D, 7, 0, 0),
+ GATE(CLK_ACLK_BTS_G3D0, "aclk_bts_g3d0", "div_aclk_g3d",
+ ENABLE_ACLK_G3D, 6, 0, 0),
+ GATE(CLK_ACLK_ASYNCAPBS_G3D, "aclk_asyncapbs_g3d", "div_pclk_g3d",
+ ENABLE_ACLK_G3D, 5, 0, 0),
+ GATE(CLK_ACLK_ASYNCAPBM_G3D, "aclk_asyncapbm_g3d", "div_aclk_g3d",
+ ENABLE_ACLK_G3D, 4, 0, 0),
+ GATE(CLK_ACLK_AHB2APB_G3DP, "aclk_ahb2apb_g3dp", "div_pclk_g3d",
+ ENABLE_ACLK_G3D, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G3DNP_150, "aclk_g3dnp_150", "div_pclk_g3d",
+ ENABLE_ACLK_G3D, 2, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G3DND_600, "aclk_g3dnd_600", "div_aclk_g3d",
+ ENABLE_ACLK_G3D, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_G3D, "aclk_g3d", "div_aclk_g3d",
+ ENABLE_ACLK_G3D, 0, 0, 0),
+
+ /* ENABLE_PCLK_G3D */
+ GATE(CLK_PCLK_BTS_G3D1, "pclk_bts_g3d1", "div_pclk_g3d",
+ ENABLE_PCLK_G3D, 3, 0, 0),
+ GATE(CLK_PCLK_BTS_G3D0, "pclk_bts_g3d0", "div_pclk_g3d",
+ ENABLE_PCLK_G3D, 2, 0, 0),
+ GATE(CLK_PCLK_PMU_G3D, "pclk_pmu_g3d", "div_pclk_g3d",
+ ENABLE_PCLK_G3D, 1, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_G3D, "pclk_sysreg_g3d", "div_pclk_g3d",
+ ENABLE_PCLK_G3D, 0, CLK_IGNORE_UNUSED, 0),
+
+ /* ENABLE_SCLK_G3D */
+ GATE(CLK_SCLK_HPM_G3D, "sclk_hpm_g3d", "div_sclk_hpm_g3d",
+ ENABLE_SCLK_G3D, 0, 0, 0),
+};
+
+static struct samsung_cmu_info g3d_cmu_info __initdata = {
+ .pll_clks = g3d_pll_clks,
+ .nr_pll_clks = ARRAY_SIZE(g3d_pll_clks),
+ .mux_clks = g3d_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(g3d_mux_clks),
+ .div_clks = g3d_div_clks,
+ .nr_div_clks = ARRAY_SIZE(g3d_div_clks),
+ .gate_clks = g3d_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks),
+ .nr_clk_ids = G3D_NR_CLK,
+ .clk_regs = g3d_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs),
+};
+
+static void __init exynos5433_cmu_g3d_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &g3d_cmu_info);
+}
+CLK_OF_DECLARE(exynos5433_cmu_g3d, "samsung,exynos5433-cmu-g3d",
+ exynos5433_cmu_g3d_init);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index bd445d2..dae83cc 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -794,4 +794,29 @@
#define BUSx_NR_CLK 11
+/* CMU_G3D */
+#define CLK_FOUT_G3D_PLL 1
+
+#define CLK_MOUT_ACLK_G3D_400 2
+#define CLK_MOUT_G3D_PLL 3
+
+#define CLK_DIV_SCLK_HPM_G3D 4
+#define CLK_DIV_PCLK_G3D 5
+#define CLK_DIV_ACLK_G3D 6
+#define CLK_ACLK_BTS_G3D1 7
+#define CLK_ACLK_BTS_G3D0 8
+#define CLK_ACLK_ASYNCAPBS_G3D 9
+#define CLK_ACLK_ASYNCAPBM_G3D 10
+#define CLK_ACLK_AHB2APB_G3DP 11
+#define CLK_ACLK_G3DNP_150 12
+#define CLK_ACLK_G3DND_600 13
+#define CLK_ACLK_G3D 14
+#define CLK_PCLK_BTS_G3D1 15
+#define CLK_PCLK_BTS_G3D0 16
+#define CLK_PCLK_PMU_G3D 17
+#define CLK_PCLK_SYSREG_G3D 18
+#define CLK_SCLK_HPM_G3D 19
+
+#define G3D_NR_CLK 20
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread* [PATCH 12/12] clk: samsung: exynos5433: Add clocks for CMU_GSCL domain
2015-01-21 6:26 [PATCH v3 00/12] clk: samsung: Add the support for exynos5433 clocks Chanwoo Choi
` (10 preceding siblings ...)
2015-01-21 6:51 ` [PATCH 11/12] clk: samsung: exynos5433: Add clocks for CMU_G3D domain Chanwoo Choi
@ 2015-01-21 6:52 ` Chanwoo Choi
11 siblings, 0 replies; 25+ messages in thread
From: Chanwoo Choi @ 2015-01-21 6:52 UTC (permalink / raw)
To: s.nawrocki, tomasz.figa
Cc: mturquette, kgene, pankaj.dubey, inki.dae, chanho61.park,
sw0312.kim, cw00.choi, linux-samsung-soc, linux-kernel
This patch adds the divider/gate of CMU_GSCL domain which contains gscaler
clocks.
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
---
.../devicetree/bindings/clock/exynos5433-clock.txt | 8 ++
drivers/clk/samsung/clk-exynos5433.c | 146 +++++++++++++++++++++
include/dt-bindings/clock/exynos5433.h | 37 +++++-
3 files changed, 190 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
index 589ed93..bf72817 100644
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
@@ -30,6 +30,8 @@ Required Properties:
which generates global data buses clock and global peripheral buses clock.
- "samsung,exynos5433-cmu-g3d" - clock controller compatible for CMU_G3D
which generates clocks for 3D Graphics Engine IP.
+ - "samsung,exynos5433-cmu-gscl" - clock controller compatible for CMU_GSCL
+ which generates clocks for GSCALER IPs.
- reg: physical base address of the controller and length of memory mapped
region.
@@ -123,6 +125,12 @@ Example 1: Examples of clock controller nodes are listed below.
#clock-cells = <1>;
};
+ cmu_gscl: clock-controller@0x13cf0000 {
+ compatible = "samsung,exynos5433-cmu-gscl";
+ reg = <0x13cf0000 0x0b10>;
+ #clock-cells = <1>;
+ };
+
Example 2: UART controller node that consumes the clock generated by the clock
controller.
diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 27dda68..1d8d67a 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -545,6 +545,12 @@ static struct samsung_gate_clock top_gate_clks[] __initdata = {
GATE(CLK_ACLK_FSYS_200, "aclk_fsys_200", "div_aclk_fsys_200",
ENABLE_ACLK_TOP, 18,
CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_GSCL_111, "aclk_gscl_111", "div_aclk_gscl_111",
+ ENABLE_ACLK_TOP, 15,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_GSCL_333, "aclk_gscl_333", "div_aclk_gscl_333",
+ ENABLE_ACLK_TOP, 14,
+ CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
GATE(CLK_ACLK_G2D_266, "aclk_g2d_266", "div_aclk_g2d_266",
ENABLE_ACLK_TOP, 2,
CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, 0),
@@ -3247,3 +3253,143 @@ static void __init exynos5433_cmu_g3d_init(struct device_node *np)
}
CLK_OF_DECLARE(exynos5433_cmu_g3d, "samsung,exynos5433-cmu-g3d",
exynos5433_cmu_g3d_init);
+
+/*
+ * Register offset definitions for CMU_GSCL
+ */
+#define MUX_SEL_GSCL 0x0200
+#define MUX_ENABLE_GSCL 0x0300
+#define MUX_STAT_GSCL 0x0400
+#define ENABLE_ACLK_GSCL 0x0800
+#define ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL0 0x0804
+#define ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL1 0x0808
+#define ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL2 0x080c
+#define ENABLE_PCLK_GSCL 0x0900
+#define ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL0 0x0904
+#define ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL1 0x0908
+#define ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL2 0x090c
+#define ENABLE_IP_GSCL0 0x0b00
+#define ENABLE_IP_GSCL1 0x0b04
+#define ENABLE_IP_GSCL_SECURE_SMMU_GSCL0 0x0b08
+#define ENABLE_IP_GSCL_SECURE_SMMU_GSCL1 0x0b0c
+#define ENABLE_IP_GSCL_SECURE_SMMU_GSCL2 0x0b10
+
+static unsigned long gscl_clk_regs[] __initdata = {
+ MUX_SEL_GSCL,
+ MUX_ENABLE_GSCL,
+ MUX_STAT_GSCL,
+ ENABLE_ACLK_GSCL,
+ ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL0,
+ ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL1,
+ ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL2,
+ ENABLE_PCLK_GSCL,
+ ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL0,
+ ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL1,
+ ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL2,
+ ENABLE_IP_GSCL0,
+ ENABLE_IP_GSCL1,
+ ENABLE_IP_GSCL_SECURE_SMMU_GSCL0,
+ ENABLE_IP_GSCL_SECURE_SMMU_GSCL1,
+ ENABLE_IP_GSCL_SECURE_SMMU_GSCL2,
+};
+
+/* list of all parent clock list */
+PNAME(aclk_gscl_111_user_p) = { "fin_pll", "aclk_gscl_111", };
+PNAME(aclk_gscl_333_user_p) = { "fin_pll", "aclk_gscl_333", };
+
+static struct samsung_mux_clock gscl_mux_clks[] __initdata = {
+ /* MUX_SEL_GSCL */
+ MUX(CLK_MOUT_ACLK_GSCL_111_USER, "mout_aclk_gscl_111_user",
+ aclk_gscl_111_user_p, MUX_SEL_GSCL, 4, 1),
+ MUX(CLK_MOUT_ACLK_GSCL_333_USER, "mout_aclk_gscl_333_user",
+ aclk_gscl_333_user_p, MUX_SEL_GSCL, 0, 1),
+};
+
+static struct samsung_gate_clock gscl_gate_clks[] __initdata = {
+ /* ENABLE_ACLK_GSCL */
+ GATE(CLK_ACLK_BTS_GSCL2, "aclk_bts_gscl2", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 11, 0, 0),
+ GATE(CLK_ACLK_BTS_GSCL1, "aclk_bts_gscl1", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 10, 0, 0),
+ GATE(CLK_ACLK_BTS_GSCL0, "aclk_bts_gscl0", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 9, 0, 0),
+ GATE(CLK_ACLK_AHB2APB_GSCLP, "aclk_ahb2apb_gsclp",
+ "mout_aclk_gscl_111_user", ENABLE_ACLK_GSCL,
+ 8, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_XIU_GSCLX, "aclk_xiu_gsclx", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 7, 0, 0),
+ GATE(CLK_ACLK_GSCLNP_111, "aclk_gsclnp_111", "mout_aclk_gscl_111_user",
+ ENABLE_ACLK_GSCL, 6, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ACLK_GSCLRTND_333, "aclk_gsclrtnd_333",
+ "mout_aclk_gscl_333_user", ENABLE_ACLK_GSCL, 5, 0, 0),
+ GATE(CLK_ACLK_GSCLBEND_333, "aclk_gsclbend_333",
+ "mout_aclk_gscl_333_user", ENABLE_ACLK_GSCL, 4, 0, 0),
+ GATE(CLK_ACLK_GSD, "aclk_gsd", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 3, 0, 0),
+ GATE(CLK_ACLK_GSCL2, "aclk_gscl2", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 2, 0, 0),
+ GATE(CLK_ACLK_GSCL1, "aclk_gscl1", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 1, 0, 0),
+ GATE(CLK_ACLK_GSCL0, "aclk_gscl0", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL, 0, 0, 0),
+
+ /* ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL0 */
+ GATE(CLK_ACLK_SMMU_GSCL0, "aclk_smmu_gscl0", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL0, 0, 0, 0),
+
+ /* ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL1 */
+ GATE(CLK_ACLK_SMMU_GSCL1, "aclk_smmu_gscl1", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL1, 0, 0, 0),
+
+ /* ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL2 */
+ GATE(CLK_ACLK_SMMU_GSCL2, "aclk_smmu_gscl2", "mout_aclk_gscl_333_user",
+ ENABLE_ACLK_GSCL_SECURE_SMMU_GSCL2, 0, 0, 0),
+
+ /* ENABLE_PCLK_GSCL */
+ GATE(CLK_PCLK_BTS_GSCL2, "pclk_bts_gscl2", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 7, 0, 0),
+ GATE(CLK_PCLK_BTS_GSCL1, "pclk_bts_gscl1", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 6, 0, 0),
+ GATE(CLK_PCLK_BTS_GSCL0, "pclk_bts_gscl0", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 5, 0, 0),
+ GATE(CLK_PCLK_PMU_GSCL, "pclk_pmu_gscl", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 4, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_SYSREG_GSCL, "pclk_sysreg_gscl",
+ "mout_aclk_gscl_111_user", ENABLE_PCLK_GSCL,
+ 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PCLK_GSCL2, "pclk_gscl2", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 2, 0, 0),
+ GATE(CLK_PCLK_GSCL1, "pclk_gscl1", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 1, 0, 0),
+ GATE(CLK_PCLK_GSCL0, "pclk_gscl0", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL, 0, 0, 0),
+
+ /* ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL0 */
+ GATE(CLK_PCLK_SMMU_GSCL0, "pclk_smmu_gscl0", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL0, 0, 0, 0),
+
+ /* ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL1 */
+ GATE(CLK_PCLK_SMMU_GSCL1, "pclk_smmu_gscl1", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL0, 0, 0, 0),
+
+ /* ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL2 */
+ GATE(CLK_PCLK_SMMU_GSCL2, "pclk_smmu_gscl2", "mout_aclk_gscl_111_user",
+ ENABLE_PCLK_GSCL_SECURE_SMMU_GSCL0, 0, 0, 0),
+};
+
+static struct samsung_cmu_info gscl_cmu_info __initdata = {
+ .mux_clks = gscl_mux_clks,
+ .nr_mux_clks = ARRAY_SIZE(gscl_mux_clks),
+ .gate_clks = gscl_gate_clks,
+ .nr_gate_clks = ARRAY_SIZE(gscl_gate_clks),
+ .nr_clk_ids = GSCL_NR_CLK,
+ .clk_regs = gscl_clk_regs,
+ .nr_clk_regs = ARRAY_SIZE(gscl_clk_regs),
+};
+
+static void __init exynos5433_cmu_gscl_init(struct device_node *np)
+{
+ samsung_cmu_register_one(np, &gscl_cmu_info);
+}
+CLK_OF_DECLARE(exynos5433_cmu_gscl, "samsung,exynos5433-cmu-gscl",
+ exynos5433_cmu_gscl_init);
diff --git a/include/dt-bindings/clock/exynos5433.h b/include/dt-bindings/clock/exynos5433.h
index dae83cc..f855859 100644
--- a/include/dt-bindings/clock/exynos5433.h
+++ b/include/dt-bindings/clock/exynos5433.h
@@ -147,8 +147,10 @@
#define CLK_SCLK_UFSUNIPRO_FSYS 229
#define CLK_SCLK_USBHOST30_FSYS 230
#define CLK_SCLK_USBDRD30_FSYS 231
+#define CLK_ACLK_GSCL_111 232
+#define CLK_ACLK_GSCL_333 233
-#define TOP_NR_CLK 232
+#define TOP_NR_CLK 234
/* CMU_CPIF */
#define CLK_FOUT_MPHY_PLL 1
@@ -819,4 +821,37 @@
#define G3D_NR_CLK 20
+/* CMU_GSCL */
+#define CLK_MOUT_ACLK_GSCL_111_USER 1
+#define CLK_MOUT_ACLK_GSCL_333_USER 2
+
+#define CLK_ACLK_BTS_GSCL2 3
+#define CLK_ACLK_BTS_GSCL1 4
+#define CLK_ACLK_BTS_GSCL0 5
+#define CLK_ACLK_AHB2APB_GSCLP 6
+#define CLK_ACLK_XIU_GSCLX 7
+#define CLK_ACLK_GSCLNP_111 8
+#define CLK_ACLK_GSCLRTND_333 9
+#define CLK_ACLK_GSCLBEND_333 10
+#define CLK_ACLK_GSD 11
+#define CLK_ACLK_GSCL2 12
+#define CLK_ACLK_GSCL1 13
+#define CLK_ACLK_GSCL0 14
+#define CLK_ACLK_SMMU_GSCL0 15
+#define CLK_ACLK_SMMU_GSCL1 16
+#define CLK_ACLK_SMMU_GSCL2 17
+#define CLK_PCLK_BTS_GSCL2 18
+#define CLK_PCLK_BTS_GSCL1 19
+#define CLK_PCLK_BTS_GSCL0 20
+#define CLK_PCLK_PMU_GSCL 21
+#define CLK_PCLK_SYSREG_GSCL 22
+#define CLK_PCLK_GSCL2 23
+#define CLK_PCLK_GSCL1 24
+#define CLK_PCLK_GSCL0 25
+#define CLK_PCLK_SMMU_GSCL0 26
+#define CLK_PCLK_SMMU_GSCL1 27
+#define CLK_PCLK_SMMU_GSCL2 28
+
+#define GSCL_NR_CLK 29
+
#endif /* _DT_BINDINGS_CLOCK_EXYNOS5433_H */
--
1.8.5.5
^ permalink raw reply related [flat|nested] 25+ messages in thread