Re: [PATCH v2] iio: imu: kmx61: Drop odr_bits from kmx61_samp_freq_table

Hartmut Knaack
2015-01-05T23:01:04Z

Daniel Baluta schrieb am 05.01.2015 um 10:21:
> odr_bits values are between 0 and 11, so we can use the index
> in kmx61_samp_freq_table instead of odr_bits structure member.
>
> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
> ---
> Changes since v1:
> * use ARRAY_SIZE instead of an hardcoded value
> * review is at: https://lkml.org/lkml/2015/1/1/46
>
> drivers/iio/imu/kmx61.c | 64 ++++++++++++++++++++-----------------------------
> 1 file changed, 26 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/iio/imu/kmx61.c b/drivers/iio/imu/kmx61.c
> index b60b22d..a32ddbb 100644
> --- a/drivers/iio/imu/kmx61.c
> +++ b/drivers/iio/imu/kmx61.c
> @@ -169,19 +169,18 @@ static const u16 kmx61_uscale_table[] = {9582, 19163, 38326};
> static const struct {
> int val;
> int val2;
> - u8 odr_bits;
> -} kmx61_samp_freq_table[] = { {12, 500000, 0x00},
> - {25, 0, 0x01},
> - {50, 0, 0x02},
> - {100, 0, 0x03},
> - {200, 0, 0x04},
> - {400, 0, 0x05},
> - {800, 0, 0x06},
> - {1600, 0, 0x07},
> - {0, 781000, 0x08},
> - {1, 563000, 0x09},
> - {3, 125000, 0x0A},
> - {6, 250000, 0x0B} };
> +} kmx61_samp_freq_table[] = { {12, 500000},
> + {25, 0},
> + {50, 0},
> + {100, 0},
> + {200, 0},
> + {400, 0},
> + {800, 0},
> + {1600, 0},
> + {0, 781000},
> + {1, 563000},
> + {3, 125000},
> + {6, 250000} };
>
> static const struct {
> int val;
> @@ -302,24 +301,10 @@ static int kmx61_convert_freq_to_bit(int val, int val2)
> for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
> if (val == kmx61_samp_freq_table[i].val &&
> val2 == kmx61_samp_freq_table[i].val2)
> - return kmx61_samp_freq_table[i].odr_bits;
> - return -EINVAL;
> -}
> -
> -static int kmx61_convert_bit_to_freq(u8 odr_bits, int *val, int *val2)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
> - if (odr_bits == kmx61_samp_freq_table[i].odr_bits) {
> - *val = kmx61_samp_freq_table[i].val;
> - *val2 = kmx61_samp_freq_table[i].val2;
> - return 0;
> - }
> + return i;
> return -EINVAL;
> }
>
> -
> static int kmx61_convert_wake_up_odr_to_bit(int val, int val2)
> {
> int i;
> @@ -478,7 +463,7 @@ static int kmx61_set_odr(struct kmx61_data *data, int val, int val2, u8 device)
>
> static int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2,
> u8 device)
> -{ int i;
> +{
> u8 lodr_bits;
>
> if (device & KMX61_ACC)
> @@ -490,13 +475,13 @@ static int kmx61_get_odr(struct kmx61_data *data, int *val, int *val2,
> else
> return -EINVAL;
>
> - for (i = 0; i < ARRAY_SIZE(kmx61_samp_freq_table); i++)
> - if (lodr_bits == kmx61_samp_freq_table[i].odr_bits) {
> - *val = kmx61_samp_freq_table[i].val;
> - *val2 = kmx61_samp_freq_table[i].val2;
> - return 0;
> - }
> - return -EINVAL;
> + if (lodr_bits >= ARRAY_SIZE(kmx61_samp_freq_table))
> + return -EINVAL;
> +
> + *val = kmx61_samp_freq_table[lodr_bits].val;
> + *val2 = kmx61_samp_freq_table[lodr_bits].val2;
> +
> + return 0;
> }
>
> static int kmx61_set_range(struct kmx61_data *data, u8 range)
> @@ -580,8 +565,11 @@ static int kmx61_chip_init(struct kmx61_data *data)
> }
> data->odr_bits = ret;
>
> - /* set output data rate for wake up (motion detection) function */
> - ret = kmx61_convert_bit_to_freq(data->odr_bits, &val, &val2);
> + /*
> + * set output data rate for wake up (motion detection) function
> + * to match data rate for accelerometer sampling
> + */
> + ret = kmx61_get_odr(data, &val, &val2, KMX61_ACC);
> if (ret < 0)
> return ret;
>
>