From: Bob Cochran <ppc@mindchasers.com>
To: Emil Medve <Emilian.Medve@Freescale.com>,
devel@driverdev.osuosl.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: Re: [RFC 00/10] Freescale DPAA B/QMan drivers
Date: Thu, 05 Feb 2015 10:48:13 -0500 [thread overview]
Message-ID: <54D390BD.4060300@mindchasers.com> (raw)
In-Reply-To: <1423061322-16059-1-git-send-email-Emilian.Medve@Freescale.com>
On 02/04/2015 09:48 AM, Emil Medve wrote:
>
> Hello,
>
>
> This is the first attempt to publish the Freescale DPAA B/QMan drivers. They are
> not to be applied yet. At this stage, this is more or less the drivers from the
> Freescale PowerPC SDK roughly squashed and split in a sequence of component
> patches. They still needs some work and cleanup before we expect to have them
> applied, but we appreciate early feedback
Hi Emil,
I had thought to try to apply these patches and build it, but I won't
get very far using it without FMAN (on my t1040). I searched through
the mail archives and didn't find FMAN patches other than for the device
tree. I also don't see it in the mainline tree.
If FMAN patches have already been submitted, please point me to it.
If not, then please let me know when we will see code to support FMAN.
Also, is it your intention for the same QMAN/BMAN drivers to be used
with both FMAN and the LS AIOP?
Thank you,
Bob
>
>
> Cheers,
>
>
> Geoff Thorpe (8):
> fsl_bman: Add drivers for the Freescale DPAA BMan
> fsl_qman: Add drivers for the Freescale DPAA QMan
> powerpc/mpc85xx: Add platform support for the Freescale DPAA BMan
> powerpc/mpc85xx: Add platform support for the Freescale DPAA QMan
> fsl_bman: Add self-tester
> fsl_qman: Add self-tester
> fsl_bman: Add debugfs support
> fsl_qman: Add debugfs support
>
> Hai-Ying Wang (2):
> fsl_bman: Add HOTPLUG_CPU support
> fsl_qman: Add HOTPLUG_CPU support
>
> arch/powerpc/Kconfig | 33 +-
> arch/powerpc/platforms/85xx/Kconfig | 11 +-
> arch/powerpc/platforms/85xx/corenet_generic.c | 26 +-
> arch/powerpc/platforms/85xx/p1023_rdb.c | 26 +-
> drivers/staging/Kconfig | 4 +-
> drivers/staging/Makefile | 1 +
> drivers/staging/fsl_qbman/Kconfig | 188 ++
> drivers/staging/fsl_qbman/Makefile | 23 +
> drivers/staging/fsl_qbman/bman_config.c | 611 ++++++
> drivers/staging/fsl_qbman/bman_debugfs.c | 119 +
> drivers/staging/fsl_qbman/bman_driver.c | 373 ++++
> drivers/staging/fsl_qbman/bman_high.c | 1055 +++++++++
> drivers/staging/fsl_qbman/bman_low.h | 524 +++++
> drivers/staging/fsl_qbman/bman_private.h | 149 ++
> drivers/staging/fsl_qbman/bman_test.c | 56 +
> drivers/staging/fsl_qbman/bman_test.h | 44 +
> drivers/staging/fsl_qbman/bman_test_high.c | 181 ++
> drivers/staging/fsl_qbman/bman_test_thresh.c | 196 ++
> drivers/staging/fsl_qbman/dpa_alloc.c | 573 +++++
> drivers/staging/fsl_qbman/dpa_sys.h | 294 +++
> drivers/staging/fsl_qbman/qbman_driver.c | 85 +
> drivers/staging/fsl_qbman/qman_config.c | 991 +++++++++
> drivers/staging/fsl_qbman/qman_debugfs.c | 1326 ++++++++++++
> drivers/staging/fsl_qbman/qman_driver.c | 548 +++++
> drivers/staging/fsl_qbman/qman_high.c | 2624 +++++++++++++++++++++++
> drivers/staging/fsl_qbman/qman_low.h | 1302 +++++++++++
> drivers/staging/fsl_qbman/qman_private.h | 283 +++
> drivers/staging/fsl_qbman/qman_test.c | 57 +
> drivers/staging/fsl_qbman/qman_test.h | 43 +
> drivers/staging/fsl_qbman/qman_test_high.c | 213 ++
> drivers/staging/fsl_qbman/qman_test_hotpotato.c | 497 +++++
> drivers/staging/fsl_qbman/qman_utility.c | 129 ++
> include/linux/fsl_bman.h | 517 +++++
> include/linux/fsl_qman.h | 1955 +++++++++++++++++
> 34 files changed, 15032 insertions(+), 25 deletions(-)
> create mode 100644 drivers/staging/fsl_qbman/Kconfig
> create mode 100644 drivers/staging/fsl_qbman/Makefile
> create mode 100644 drivers/staging/fsl_qbman/bman_config.c
> create mode 100644 drivers/staging/fsl_qbman/bman_debugfs.c
> create mode 100644 drivers/staging/fsl_qbman/bman_driver.c
> create mode 100644 drivers/staging/fsl_qbman/bman_high.c
> create mode 100644 drivers/staging/fsl_qbman/bman_low.h
> create mode 100644 drivers/staging/fsl_qbman/bman_private.h
> create mode 100644 drivers/staging/fsl_qbman/bman_test.c
> create mode 100644 drivers/staging/fsl_qbman/bman_test.h
> create mode 100644 drivers/staging/fsl_qbman/bman_test_high.c
> create mode 100644 drivers/staging/fsl_qbman/bman_test_thresh.c
> create mode 100644 drivers/staging/fsl_qbman/dpa_alloc.c
> create mode 100644 drivers/staging/fsl_qbman/dpa_sys.h
> create mode 100644 drivers/staging/fsl_qbman/qbman_driver.c
> create mode 100644 drivers/staging/fsl_qbman/qman_config.c
> create mode 100644 drivers/staging/fsl_qbman/qman_debugfs.c
> create mode 100644 drivers/staging/fsl_qbman/qman_driver.c
> create mode 100644 drivers/staging/fsl_qbman/qman_high.c
> create mode 100644 drivers/staging/fsl_qbman/qman_low.h
> create mode 100644 drivers/staging/fsl_qbman/qman_private.h
> create mode 100644 drivers/staging/fsl_qbman/qman_test.c
> create mode 100644 drivers/staging/fsl_qbman/qman_test.h
> create mode 100644 drivers/staging/fsl_qbman/qman_test_high.c
> create mode 100644 drivers/staging/fsl_qbman/qman_test_hotpotato.c
> create mode 100644 drivers/staging/fsl_qbman/qman_utility.c
> create mode 100644 include/linux/fsl_bman.h
> create mode 100644 include/linux/fsl_qman.h
>
next prev parent reply other threads:[~2015-02-05 15:56 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-04 14:48 [RFC 00/10] Freescale DPAA B/QMan drivers Emil Medve
2015-02-04 14:48 ` [RFC 01/10] fsl_bman: Add drivers for the Freescale DPAA BMan Emil Medve
2015-02-04 14:48 ` [RFC 02/10] fsl_qman: Add drivers for the Freescale DPAA QMan Emil Medve
2015-02-04 14:48 ` [RFC 03/10] powerpc/mpc85xx: Add platform support for the Freescale DPAA BMan Emil Medve
2015-02-04 14:48 ` [RFC 04/10] powerpc/mpc85xx: Add platform support for the Freescale DPAA QMan Emil Medve
2015-02-04 14:48 ` [RFC 05/10] fsl_bman: Add self-tester Emil Medve
2015-02-04 14:48 ` [RFC 06/10] fsl_qman: " Emil Medve
2015-02-04 14:48 ` [RFC 07/10] fsl_bman: Add debugfs support Emil Medve
2015-02-04 14:48 ` [RFC 08/10] fsl_qman: " Emil Medve
2015-02-04 14:48 ` [RFC 09/10] fsl_bman: Add HOTPLUG_CPU support Emil Medve
2015-02-04 14:48 ` [RFC 10/10] fsl_qman: " Emil Medve
2015-02-04 18:40 ` [RFC 00/10] Freescale DPAA B/QMan drivers Greg KH
2015-02-04 22:16 ` Emil Medve
2015-02-05 2:29 ` Greg KH
2015-02-05 8:41 ` Dan Carpenter
2015-02-05 14:55 ` Emil Medve
2015-02-05 15:48 ` Bob Cochran [this message]
2015-02-05 15:52 ` Emil Medve
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54D390BD.4060300@mindchasers.com \
--to=ppc@mindchasers.com \
--cc=Emilian.Medve@Freescale.com \
--cc=devel@driverdev.osuosl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox