From: Guenter Roeck <linux@roeck-us.net>
To: Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Henrik Rydberg <rydberg@bitmath.org>,
Jean Delvare <jdelvare@suse.de>
Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] hwmon: (applesmc) Allow format checking
Date: Thu, 12 Feb 2015 21:13:35 -0800 [thread overview]
Message-ID: <54DD87FF.7070803@roeck-us.net> (raw)
In-Reply-To: <1423750517-26439-1-git-send-email-linux@rasmusvillemoes.dk>
On 02/12/2015 06:15 AM, Rasmus Villemoes wrote:
> Currently gcc and other tools can't check the format strings. It's
> easy to fix by letting fan_speed_fmt simply hold what is different
> between the strings (and renaming it appropriately). While at it, we
> can also eliminate some wasted space and an extra level of indirection
> by making it an array of char[4] instead of char*.
>
> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Saving a few bytes with the added cost of harder to understand code.
Not really sure if that is worth it. I'll need to see a Tested-by:
for this patch.
Also, please fix the checkpatch warnings.
Thanks,
Guenter
> ---
> drivers/hwmon/applesmc.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> index 0af63da6b603..0c950e1b03f3 100644
> --- a/drivers/hwmon/applesmc.c
> +++ b/drivers/hwmon/applesmc.c
> @@ -84,12 +84,12 @@
> #define TEMP_SENSOR_TYPE "sp78"
>
> /* List of keys used to read/write fan speeds */
> -static const char *const fan_speed_fmt[] = {
> - "F%dAc", /* actual speed */
> - "F%dMn", /* minimum speed (rw) */
> - "F%dMx", /* maximum speed */
> - "F%dSf", /* safe speed - not all models */
> - "F%dTg", /* target speed (manual: rw) */
> +static const char fan_speed_suffix[][4] = {
> + "Ac", /* actual speed */
> + "Mn", /* minimum speed (rw) */
> + "Mx", /* maximum speed */
> + "Sf", /* safe speed - not all models */
> + "Tg", /* target speed (manual: rw) */
> };
>
> #define INIT_TIMEOUT_MSECS 5000 /* wait up to 5s for device init ... */
> @@ -811,7 +811,7 @@ static ssize_t applesmc_show_fan_speed(struct device *dev,
> char newkey[5];
> u8 buffer[2];
>
> - sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
> + sprintf(newkey, "F%d%s", to_index(attr), fan_speed_suffix[to_option(attr)]);
>
> ret = applesmc_read_key(newkey, buffer, 2);
> speed = ((buffer[0] << 8 | buffer[1]) >> 2);
> @@ -834,7 +834,7 @@ static ssize_t applesmc_store_fan_speed(struct device *dev,
> if (kstrtoul(sysfsbuf, 10, &speed) < 0 || speed >= 0x4000)
> return -EINVAL; /* Bigger than a 14-bit value */
>
> - sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
> + sprintf(newkey, "F%d%s", to_index(attr), fan_speed_suffix[to_option(attr)]);
>
> buffer[0] = (speed >> 6) & 0xff;
> buffer[1] = (speed << 2) & 0xff;
>
prev parent reply other threads:[~2015-02-13 5:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-12 14:15 [PATCH 1/3] hwmon: (applesmc) Allow format checking Rasmus Villemoes
2015-02-12 14:15 ` [PATCH 2/3] hwmon: (coretemp) " Rasmus Villemoes
2015-02-13 5:08 ` Guenter Roeck
2015-02-12 14:15 ` [PATCH 3/3] hwmon: (ibmpex) Allow format string checking Rasmus Villemoes
2015-02-13 5:09 ` Guenter Roeck
2015-02-13 5:13 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54DD87FF.7070803@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=lm-sensors@lm-sensors.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox