From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757706AbbCDAdq (ORCPT ); Tue, 3 Mar 2015 19:33:46 -0500 Received: from mail-gw2-out.broadcom.com ([216.31.210.63]:12513 "EHLO mail-gw2-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754120AbbCDAdo (ORCPT ); Tue, 3 Mar 2015 19:33:44 -0500 X-IronPort-AV: E=Sophos;i="5.09,684,1418112000"; d="scan'208";a="58506826" Message-ID: <54F652E7.4080104@broadcom.com> Date: Tue, 3 Mar 2015 16:33:43 -0800 From: Arun Ramamurthy User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.4.0 MIME-Version: 1.0 To: Rob Herring CC: Rob Herring , Pawel Moll , "Mark Rutland" , Ian Campbell , Kumar Gala , "Russell King" , Jean-Christophe Plagniol-Villard , Tomi Valkeinen , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-fbdev@vger.kernel.org" , Dmitry Torokhov , Anatol Pomazau , Jonathan Richardson , Scott Branden , Ray Jui , Subject: Re: [PATCH] video: ARM CLCD: Added support for FBIO_WAITFORVSYNC References: <1424898082-1522-1-git-send-email-arun.ramamurthy@broadcom.com> <1424898082-1522-3-git-send-email-arun.ramamurthy@broadcom.com> In-Reply-To: Content-Type: text/plain; charset="utf-8"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 15-03-02 03:29 PM, Rob Herring wrote: > On Wed, Feb 25, 2015 at 3:01 PM, Arun Ramamurthy > wrote: >> Added ioctl and interrupt handler functions to support FBIO_WAITFORVSYNC >> Also corrected documentation to make interrupts and interrupt-names >> optional as they are not required properties. >> >> Reviewed-by: Ray Jui >> Reviewed-by: Scott Branden >> Signed-off-by: Arun Ramamurthy 0 >> --- >> .../devicetree/bindings/video/arm,pl11x.txt | 11 +-- > > Please split bindings to separate patches. Rob, I looked at the history of patches to this driver and all them included changes to the documentation in the same patch so I followed a similar model. I assumed that a separate patch was only required when the documentation was being added from scratch and not when modifying a few lines. Is this not the case? > >> drivers/video/fbdev/amba-clcd.c | 82 ++++++++++++++++++++++ >> include/linux/amba/clcd.h | 4 ++ >> 3 files changed, 89 insertions(+), 8 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt >> index 2262cdb..7d19024 100644 >> --- a/Documentation/devicetree/bindings/video/arm,pl11x.txt >> +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt >> @@ -10,14 +10,6 @@ Required properties: >> >> - reg: base address and size of the control registers block >> >> -- interrupt-names: either the single entry "combined" representing a >> - combined interrupt output (CLCDINTR), or the four entries >> - "mbe", "vcomp", "lnbu", "fuf" representing the individual >> - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts >> - >> -- interrupts: contains an interrupt specifier for each entry in >> - interrupt-names >> - >> - clock-names: should contain "clcdclk" and "apb_pclk" >> >> - clocks: contains phandle and clock specifier pairs for the entries >> @@ -54,6 +46,9 @@ Optional properties: >> It can be used to configure a virtual y resolution. It >> must be a value larger than the actual y resolution. >> >> +- interrupts: contains an interrupt specifier for the clcd vcomp interrupt >> + This is required for the driver to handle FBIO_WAITFORVSYNC ioctls. >> + > > What happened to interrupt-names? As mentioned before, these changes to the documentation will be undone in V2. Thanks > > Rob >