From: AsterixTheGaul <asterixthegaul@gmail.com>
To: Nish Aravamudan <nish.aravamudan@gmail.com>
Cc: Moritz Muehlenhoff <jmm@inutil.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.12-rc2
Date: Fri, 8 Apr 2005 12:09:19 +0530 [thread overview]
Message-ID: <54b5dbf505040723392f29b18c@mail.gmail.com> (raw)
In-Reply-To: <54b5dbf5050407232810f7a20d@mail.gmail.com>
Err... never mind... I was not doing any radeon control.
On Apr 8, 2005 11:58 AM, AsterixTheGaul <asterixthegaul@gmail.com> wrote:
> > FWIW, I have the same problem on a T41p with 2.6.11 and 2.6.12-rc2,
> > except that neither returns from suspend-to-ram with video restored on
> > the LCD. I believe I was able to get video restored on an external CRT
> > in either 2.6.12-rc2 or 2.6.12-rc2-mm1, but the LCD still didn't
> > restore (can verify later today, if you'd like). I had dumped out the
> > radeontool regs values before & after the sleep, in case they help.
> > They are attached.
>
> Hmm... I have 2.6.12-rc2 on a T41 and "suspend to ram" works good (well
> except for a backtrace complaining about __might_sleep but otherwise ok).
>
> Apr 7 23:17:10 localhost kernel: Debug: sleeping function called from
> invalid context at mm/slab.c:2090
> Apr 7 23:17:10 localhost kernel: in_atomic():0, irqs_disabled():1
> Apr 7 23:17:10 localhost kernel: [<c011d9e3>] __might_sleep+0xa3/0xc0
> Apr 7 23:17:10 localhost kernel: [<c015beb0>] kmem_cache_alloc+0x50/0x60
> Apr 7 23:17:10 localhost kernel: [<c0269750>] acpi_pci_link_set+0x4a/0x1a2
> Apr 7 23:17:10 localhost kernel: [<c0269bc9>] irqrouter_resume+0x1c/0x24
> Apr 7 23:17:10 localhost kernel: [<c02b70f6>] sysdev_resume+0x66/0xc4
> Apr 7 23:17:10 localhost kernel: [<c02bbcc5>] device_power_up+0x5/0xa
> Apr 7 23:17:10 localhost kernel: [<c014a426>] suspend_enter+0x36/0x60
> Apr 7 23:17:10 localhost kernel: [<c014a3a3>] suspend_prepare+0x63/0xb0
> Apr 7 23:17:10 localhost kernel: [<c014a4ec>] enter_state+0x5c/0x70
> Apr 7 23:17:10 localhost kernel: [<c014a639>] state_store+0xa9/0xbc
> Apr 7 23:17:10 localhost kernel: [<c014a590>] state_store+0x0/0xbc
> Apr 7 23:17:10 localhost kernel: [<c01d27c6>] subsys_attr_store+0x36/0x50
> Apr 7 23:17:10 localhost kernel: [<c01d2a6e>] flush_write_buffer+0x2e/0x40
> Apr 7 23:17:10 localhost kernel: [<c01d2ace>] sysfs_write_file+0x4e/0x80
> Apr 7 23:17:10 localhost kernel: [<c017bdee>] vfs_write+0x12e/0x130
> Apr 7 23:17:10 localhost kernel: [<c017bea1>] sys_write+0x41/0x70
> Apr 7 23:17:10 localhost kernel: [<c01039ff>] sysenter_past_esp+0x54/0x75
>
>
> >
> > I posted these problems in the "Call for help S3" thread, but no one responded.
> >
> > Thanks,
> > Nish
> >
> >
> >
>
next prev parent reply other threads:[~2005-04-08 6:40 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.58.0504040945100.32180@ppc970.osdl.org>
2005-04-04 21:32 ` Linux 2.6.12-rc2 Linus Torvalds
2005-04-04 22:58 ` Andres Salomon
2005-04-04 23:04 ` Andres Salomon
2005-04-04 23:07 ` Andres Salomon
2005-04-04 23:24 ` Al Viro
2005-04-04 23:49 ` Russell King
2005-04-04 23:54 ` Al Viro
2005-04-04 23:37 ` Stephen Rothwell
2005-04-04 23:54 ` Al Viro
2005-04-05 4:54 ` Gene Heskett
2005-04-06 17:14 ` Moritz Muehlenhoff
2005-04-06 22:42 ` Benjamin Herrenschmidt
2005-04-07 17:50 ` Moritz Muehlenhoff
2005-04-07 18:54 ` Nish Aravamudan
2005-04-07 22:45 ` Benjamin Herrenschmidt
2005-04-08 0:44 ` Nish Aravamudan
2005-04-08 6:28 ` AsterixTheGaul
2005-04-08 6:39 ` AsterixTheGaul [this message]
2005-04-08 7:00 ` AsterixTheGaul
2005-04-08 15:39 ` Nish Aravamudan
2005-04-08 18:14 ` AsterixTheGaul
2005-04-07 22:43 ` Benjamin Herrenschmidt
2005-04-05 7:29 Oleg Nesterov
2005-04-05 8:03 ` Andrew Morton
-- strict thread matches above, loose matches on Subject: below --
2005-04-05 14:56 Hubert Tonneau
2005-04-06 23:20 Bob Gill
2005-04-06 23:25 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54b5dbf505040723392f29b18c@mail.gmail.com \
--to=asterixthegaul@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=jmm@inutil.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nish.aravamudan@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox