Re: [PATCH 1/2] ASoC: Add driver for PROTO Audio CODEC (with a WM8731)

[Codrin Ciubotariu <codrin.ciubotariu@microchip.com>]

On 29.08.2018 18:20, Codrin Ciubotariu wrote:
> On 29.08.2018 17:53, Mark Brown wrote:
>> On Wed, Aug 29, 2018 at 05:47:26PM +0300, Codrin Ciubotariu wrote:
>>
>>> +static const unsigned int wm8731_rates_12288000[] = {
>>> +    8000, 32000, 48000, 96000,
>>> +};
>>> +
>>> +static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 
>>> = {
>>> +    .list = wm8731_rates_12288000,
>>> +    .count = ARRAY_SIZE(wm8731_rates_12288000),
>>> +};
>>> +
>>> +static int snd_proto_startup(struct snd_pcm_substream *substream)
>>> +{
>>> +    /* Setup constraints, because there is a 12.288 MHz XTAL on the 
>>> board */
>>> +    snd_pcm_hw_constraint_list(substream->runtime, 0,
>>> +                   SNDRV_PCM_HW_PARAM_RATE,
>>> +                   &wm8731_constraints_12288000);
>>> +    return 0;
>>> +}
>>
>> This bit is better added to the CODEC driver since it'll apply to any
>> system where there's this clock rate (someone else could come in and add
>> other rates, no need to do that yourself though it'd be nice of course).
> 
> I could do it.

It looks like these constraints are already in the wm8731 driver. I will 
wait for more comments and then I will send a v2 without this part.

Thanks and best regards,
Codrin