From: Alexander Holler <holler@ahsoftware.de>
To: Alan Stern <stern@rowland.harvard.edu>,
Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
USB list <linux-usb@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>, Felipe Balbi <balbi@ti.com>
Subject: Re: gadgetfs broken since 7f7f25e8
Date: Wed, 11 Mar 2015 11:37:23 +0100 [thread overview]
Message-ID: <55001AE3.3090207@ahsoftware.de> (raw)
In-Reply-To: <55001910.3020409@ahsoftware.de>
Am 11.03.2015 um 11:29 schrieb Alexander Holler:
> Am 07.03.2015 um 12:23 schrieb Alexander Holler:
>
>> In detail it's only usable once (3.19). When unmounting it throws one or
>> two warnings because of too much puts (kernel/module.c:963, see below).
>> The result is that a subsequent mount afterwards fails because the old
>> instance is still busy (Resource temporarily unavailable).
>>
>> I haven't looked deeper into that problem up to now.
>>
>> Regards,
>>
>> Alexander Holler
>>
>>
>> [ 151.425966] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
>> [ 151.479616] gadgetfs: bound to musb-hdrc driver
>> [ 151.781095] gadgetfs: connected
>> [ 151.785871] gadgetfs: disconnected
>> [ 151.864187] gadgetfs: connected
>> [ 151.873258] gadgetfs: configuration #1
>> [ 151.962240] musb_g_ep0_irq 804: SETUP packet len 0 != 8 ?
>> [ 155.065272] input: USB Keyboard as
>> /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb2/2-1/2-1:1.0/0003:04D9:1603.0003/input/input2
>>
>>
>> [ 155.119746] hid-generic 0003:04D9:1603.0003: input,hidraw0: USB HID
>> v1.10 Keyboard [ USB Keyboard] on usb-musb-hdrc.1.auto-1/input0
>> [ 155.138194] input: USB Keyboard as
>> /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb2/2-1/2-1:1.1/0003:04D9:1603.0004/input/input3
>>
>>
>> [ 155.189783] hid-generic 0003:04D9:1603.0004: input,hidraw1: USB HID
>> v1.10 Device [ USB Keyboard] on usb-musb-hdrc.1.auto-1/input1
>> [ 155.190002] gadgetfs: disconnected
>> [ 155.190352] ------------[ cut here ]------------
>> [ 155.190389] WARNING: CPU: 0 PID: 1290 at kernel/module.c:963
>> module_put+0x54/0x5c()
>> [ 155.190396] Modules linked in: gadgetfs usb_f_ecm usb_f_rndis u_ether
>> libcomposite configfs ipv6 bnep bluetooth rfkill hid_generic tda998x
>> tilcdc drm_kms_helper ti_cpsw ptp drm usbhid pps_core davinci_cpdma
>> omap_mailbox cppi41 [last unloaded: g_ether]
>> [ 155.190459] CPU: 0 PID: 1290 Comm: usb-mitm Not tainted
>> 3.19.0-bbb-00080-g5e25c2a #246
>> [ 155.190466] Hardware name: Generic AM33XX (Flattened Device Tree)
>> [ 155.190505] [<c00126f0>] (unwind_backtrace) from [<c00108d8>]
>> (show_stack+0x10/0x14)
>> [ 155.190527] [<c00108d8>] (show_stack) from [<c002ef74>]
>> (warn_slowpath_common+0x80/0xa8)
>> [ 155.190542] [<c002ef74>] (warn_slowpath_common) from [<c002f02c>]
>> (warn_slowpath_null+0x18/0x20)
>> [ 155.190556] [<c002f02c>] (warn_slowpath_null) from [<c0069afc>]
>> (module_put+0x54/0x5c)
>> [ 155.190581] [<c0069afc>] (module_put) from [<c00c3be0>]
>> (deactivate_locked_super+0x4c/0x64)
>> [ 155.190598] [<c00c3be0>] (deactivate_locked_super) from [<c00d8d88>]
>> (cleanup_mnt+0x4c/0x6c)
>> [ 155.190614] [<c00d8d88>] (cleanup_mnt) from [<c0041908>]
>> (task_work_run+0x8c/0xa4)
>> [ 155.190628] [<c0041908>] (task_work_run) from [<c001059c>]
>> (do_work_pending+0x98/0xac)
>> [ 155.190642] [<c001059c>] (do_work_pending) from [<c000dc04>]
>> (work_pending+0xc/0x20)
>> [ 155.190649] ---[ end trace c3d57fca714062a3 ]---
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
> That, BTW. is too a result of changing f_op dynamically. They will be
> changed from having no owner to having gadgetfs as owner.
Which fails since commit e513cc1c (3.19).
>
> Alexander Holler
next prev parent reply other threads:[~2015-03-11 10:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 8:28 gadgetfs broken since 7f7f25e8 Alexander Holler
2015-03-02 9:13 ` Richard Weinberger
2015-03-02 10:20 ` Al Viro
2015-03-02 11:39 ` Alexander Holler
2015-03-02 13:02 ` Alexander Holler
2015-03-02 14:31 ` Alexander Holler
2015-03-03 8:39 ` Al Viro
2015-03-03 15:47 ` Alan Stern
2015-03-03 21:42 ` Al Viro
2015-03-04 15:31 ` Alan Stern
2015-03-07 11:23 ` Alexander Holler
2015-03-07 20:03 ` Alexander Holler
2015-03-07 20:51 ` Al Viro
2015-03-07 20:59 ` Alexander Holler
2015-03-07 21:08 ` Alan Stern
2015-03-08 17:38 ` Al Viro
2015-03-08 18:35 ` Alan Stern
2015-03-08 19:20 ` Al Viro
2015-03-10 21:07 ` Felipe Balbi
2015-03-11 10:29 ` Alexander Holler
2015-03-11 10:37 ` Alexander Holler [this message]
2015-03-03 22:20 ` Al Viro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55001AE3.3090207@ahsoftware.de \
--to=holler@ahsoftware.de \
--cc=balbi@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=richard.weinberger@gmail.com \
--cc=stern@rowland.harvard.edu \
--cc=viro@ZenIV.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).