Re: [PATCH 2/3] Documentation: devicetree: add binding doc for Broadcom NAND controller

[Scott Branden <sbranden@broadcom.com>]

On 15-03-16 04:37 PM, Brian Norris wrote:
> On Mon, Mar 16, 2015 at 04:07:51PM -0700, Scott Branden wrote:
>> On 15-03-06 05:18 PM, Brian Norris wrote:
>>> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
>>> ---
>>>   .../devicetree/bindings/mtd/brcmstb_nand.txt       | 109 +++++++++++++++++++++
>>>   1 file changed, 109 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/mtd/brcmstb_nand.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/mtd/brcmstb_nand.txt b/Documentation/devicetree/bindings/mtd/brcmstb_nand.txt
>>> new file mode 100644
>>> index 000000000000..933d44943cbb
>>> --- /dev/null
>>
>> Could you change the binding document with the vendor prefix to
>> match all the other drivers we have been submitting? ie.
>> "brcm,brcmnand.txt"
>
> $ find Documentation/devicetree/ -name 'broadcom*'
> Documentation/devicetree/bindings/net/broadcom-systemport.txt
> Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
> Documentation/devicetree/bindings/net/broadcom-mdio-unimac.txt
> Documentation/devicetree/bindings/net/broadcom-bcmgenet.txt
> Documentation/devicetree/bindings/net/broadcom-sf2.txt
>
> $ find Documentation/devicetree/ -name 'brcm[^,]*'
> Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
>
> $ find Documentation/devicetree/ -name 'brcm,*'
> Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
> Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
> Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
> Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
> Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
> Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
> Documentation/devicetree/bindings/spi/brcm,bcm2835-spi.txt
> Documentation/devicetree/bindings/rng/brcm,bcm2835.txt
> Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
> Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
> Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
> Documentation/devicetree/bindings/watchdog/brcm,bcm2835-pm-wdog.txt
> Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method
> Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt
> Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt
>
> $ find Documentation/devicetree/bindings -name '*.txt' | grep -v ','| wc -l
> 1227
> $ find Documentation/devicetree/bindings -name '*.txt' | grep ','| wc -l
> 352
>
> So, what's the standard? Company prefix? Long name? Commas? Hyphens?

The problem with devicetree binding is there is no standard for much of 
anything.  Some others use the vendor prefix for all their binding 
documentation.  We can try to do the same?

>
> Brian
>