public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jyri Sarha <jsarha@ti.com>
To: Martin Fuzzey <mfuzzey@parkeon.com>,
	Mike Turquette <mturquette@linaro.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] clk: clk-gpio-gate: Fix active low
Date: Wed, 18 Mar 2015 16:52:14 +0200	[thread overview]
Message-ID: <5509911E.7070400@ti.com> (raw)
In-Reply-To: <20150318135317.4817.92802.stgit@localhost>

On 03/18/15 15:53, Martin Fuzzey wrote:
> The active low flag in the DT cell is currently ignored.
>
> This occurs because of_get_named_gpio_flags() does not apply the flags
> to the underlying struct gpio_desc so the test in clk_register_gpio_gate()
> was bogus.
>
> Note that this patch changes the internal kernel API for
> clk_register_gpio_gate() but there are currently no other users.
>
> Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>

Acked-by: Jyri Sarha <jsarha@ti.com>

> ---
>   drivers/clk/clk-gpio-gate.c  |   31 +++++++++++++++++--------------
>   include/linux/clk-provider.h |    2 +-
>   2 files changed, 18 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/clk/clk-gpio-gate.c b/drivers/clk/clk-gpio-gate.c
> index 08e4322..a71cabe 100644
> --- a/drivers/clk/clk-gpio-gate.c
> +++ b/drivers/clk/clk-gpio-gate.c
> @@ -65,10 +65,12 @@ EXPORT_SYMBOL_GPL(clk_gpio_gate_ops);
>    * @dev: device that is registering this clock
>    * @name: name of this clock
>    * @parent_name: name of this clock's parent
> - * @gpiod: gpio descriptor to gate this clock
> + * @gpio: gpio number to gate this clock
> + * @active_low: true if gpio should be set to 0 to enable clock
> + * @flags: clock flags
>    */
>   struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
> -		const char *parent_name, struct gpio_desc *gpiod,
> +		const char *parent_name, unsigned gpio, bool active_low,
>   		unsigned long flags)
>   {
>   	struct clk_gpio *clk_gpio = NULL;
> @@ -77,20 +79,19 @@ struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
>   	unsigned long gpio_flags;
>   	int err;
>
> -	if (gpiod_is_active_low(gpiod))
> -		gpio_flags = GPIOF_OUT_INIT_HIGH;
> +	if (active_low)
> +		gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_HIGH;
>   	else
>   		gpio_flags = GPIOF_OUT_INIT_LOW;
>
>   	if (dev)
> -		err = devm_gpio_request_one(dev, desc_to_gpio(gpiod),
> -					    gpio_flags, name);
> +		err = devm_gpio_request_one(dev, gpio, gpio_flags, name);
>   	else
> -		err = gpio_request_one(desc_to_gpio(gpiod), gpio_flags, name);
> +		err = gpio_request_one(gpio, gpio_flags, name);
>
>   	if (err) {
>   		pr_err("%s: %s: Error requesting clock control gpio %u\n",
> -		       __func__, name, desc_to_gpio(gpiod));
> +		       __func__, name, gpio);
>   		return ERR_PTR(err);
>   	}
>
> @@ -111,7 +112,7 @@ struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
>   	init.parent_names = (parent_name ? &parent_name : NULL);
>   	init.num_parents = (parent_name ? 1 : 0);
>
> -	clk_gpio->gpiod = gpiod;
> +	clk_gpio->gpiod = gpio_to_desc(gpio);
>   	clk_gpio->hw.init = &init;
>
>   	clk = clk_register(dev, &clk_gpio->hw);
> @@ -123,7 +124,8 @@ struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
>   		kfree(clk_gpio);
>
>   clk_register_gpio_gate_err:
> -	gpiod_put(gpiod);
> +	if (!dev)
> +		gpio_free(gpio);
>
>   	return clk;
>   }
> @@ -149,8 +151,8 @@ static struct clk *of_clk_gpio_gate_delayed_register_get(
>   	struct clk *clk;
>   	const char *clk_name = data->node->name;
>   	const char *parent_name;
> -	struct gpio_desc *gpiod;
>   	int gpio;
> +	enum of_gpio_flags of_flags;
>
>   	mutex_lock(&data->lock);
>
> @@ -159,7 +161,8 @@ static struct clk *of_clk_gpio_gate_delayed_register_get(
>   		return data->clk;
>   	}
>
> -	gpio = of_get_named_gpio_flags(data->node, "enable-gpios", 0, NULL);
> +	gpio = of_get_named_gpio_flags(data->node, "enable-gpios", 0,
> +						&of_flags);
>   	if (gpio < 0) {
>   		mutex_unlock(&data->lock);
>   		if (gpio != -EPROBE_DEFER)
> @@ -167,11 +170,11 @@ static struct clk *of_clk_gpio_gate_delayed_register_get(
>   			       __func__, clk_name);
>   		return ERR_PTR(gpio);
>   	}
> -	gpiod = gpio_to_desc(gpio);
>
>   	parent_name = of_clk_get_parent_name(data->node, 0);
>
> -	clk = clk_register_gpio_gate(NULL, clk_name, parent_name, gpiod, 0);
> +	clk = clk_register_gpio_gate(NULL, clk_name, parent_name, gpio,
> +					of_flags & OF_GPIO_ACTIVE_LOW, 0);
>   	if (IS_ERR(clk)) {
>   		mutex_unlock(&data->lock);
>   		return clk;
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index d936409..6f514d5 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -515,7 +515,7 @@ struct clk_gpio {
>
>   extern const struct clk_ops clk_gpio_gate_ops;
>   struct clk *clk_register_gpio_gate(struct device *dev, const char *name,
> -		const char *parent_name, struct gpio_desc *gpio,
> +		const char *parent_name, unsigned gpio, bool active_low,
>   		unsigned long flags);
>
>   void of_gpio_clk_gate_setup(struct device_node *node);
>


  reply	other threads:[~2015-03-18 14:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-18 13:53 [PATCH] clk: clk-gpio-gate: Fix active low Martin Fuzzey
2015-03-18 14:52 ` Jyri Sarha [this message]
2015-04-11  0:51   ` Michael Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5509911E.7070400@ti.com \
    --to=jsarha@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mfuzzey@parkeon.com \
    --cc=mturquette@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox