Re: [PATCH v4 1/4] ARM: EXYNOS: fix CPU1 hotplug on Exynos3250

[Chanwoo Choi <cw00.choi@samsung.com>]

Hi Bartlomiej,

I tested this patch on Exynos3250-based Gear2 board.
Thanks for your effor to solve this issue.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>

Best Regards,
Chanwoo Choi

On 03/19/2015 01:00 AM, Bartlomiej Zolnierkiewicz wrote:
> CPU1 hotplug may hang when AFTR is used.  Fix it by:
> - setting AUTOWAKEUP_EN bit in ARM_COREx_CONFIGURATION register in
>   exynos_cpu_power_up()
> - not clearing reserved bits of ARM_COREx_CONFIGURATION register in
>   exynos_cpu_power_down()
> - waiting while an undocumented register 0x0908 becomes non-zero in
>   exynos_core_restart()
> - using dsb_sev() instead of IPI in exynos_boot_secondary() on
>   Exynos3250
> 
> This patch also fixes hotplug issues during resume from S2R:
> $ echo mem > /sys/power/state
> [  156.517266] Disabling non-boot CPUs ...
> [  156.517781] IRQ18 no longer affine to CPU1
> [  156.518043] CPU1: shutdown
> [  156.544718] Enabling non-boot CPUs ...
> [  156.554925] CPU1: Software reset
> [  158.552631] CPU1: failed to come online
> [  158.552753] Error taking CPU1 up: -5
> 
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  arch/arm/mach-exynos/platsmp.c  | 23 ++++++++++++++++++++---
>  arch/arm/mach-exynos/regs-pmu.h |  2 ++
>  2 files changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> index d2e9f12..ebd135b 100644
> --- a/arch/arm/mach-exynos/platsmp.c
> +++ b/arch/arm/mach-exynos/platsmp.c
> @@ -126,6 +126,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
>   */
>  void exynos_cpu_power_down(int cpu)
>  {
> +	u32 core_conf;
> +
>  	if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
>  		/*
>  		 * Bypass power down for CPU0 during suspend. Check for
> @@ -137,7 +139,10 @@ void exynos_cpu_power_down(int cpu)
>  		if (!(val & S5P_CORE_LOCAL_PWR_EN))
>  			return;
>  	}
> -	pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> +
> +	core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> +	core_conf &= ~S5P_CORE_LOCAL_PWR_EN;
> +	pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
>  }
>  
>  /**
> @@ -148,7 +153,12 @@ void exynos_cpu_power_down(int cpu)
>   */
>  void exynos_cpu_power_up(int cpu)
>  {
> -	pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
> +	u32 core_conf = S5P_CORE_LOCAL_PWR_EN;
> +
> +	if (soc_is_exynos3250())
> +		core_conf |= S5P_CORE_AUTOWAKEUP_EN;
> +
> +	pmu_raw_writel(core_conf,
>  			EXYNOS_ARM_CORE_CONFIGURATION(cpu));
>  }
>  
> @@ -226,6 +236,10 @@ static void exynos_core_restart(u32 core_id)
>  	if (!of_machine_is_compatible("samsung,exynos3250"))
>  		return;
>  
> +	while (!pmu_raw_readl(S5P_PMU_SPARE2))
> +		udelay(10);
> +	udelay(10);
> +
>  	val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));
>  	val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
>  	pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
> @@ -346,7 +360,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
>  
>  		call_firmware_op(cpu_boot, core_id);
>  
> -		arch_send_wakeup_ipi_mask(cpumask_of(cpu));
> +		if (soc_is_exynos3250())
> +			dsb_sev();
> +		else
> +			arch_send_wakeup_ipi_mask(cpumask_of(cpu));
>  
>  		if (pen_release == -1)
>  			break;
> diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
> index eb461e1..84ddce1 100644
> --- a/arch/arm/mach-exynos/regs-pmu.h
> +++ b/arch/arm/mach-exynos/regs-pmu.h
> @@ -49,6 +49,7 @@
>  #define S5P_INFORM5				0x0814
>  #define S5P_INFORM6				0x0818
>  #define S5P_INFORM7				0x081C
> +#define S5P_PMU_SPARE2				0x0908
>  #define S5P_PMU_SPARE3				0x090C
>  
>  #define EXYNOS_IROM_DATA2			0x0988
> @@ -182,6 +183,7 @@
>  
>  #define S5P_CORE_LOCAL_PWR_EN			0x3
>  #define S5P_CORE_WAKEUP_FROM_LOCAL_CFG		(0x3 << 8)
> +#define S5P_CORE_AUTOWAKEUP_EN			(1 << 31)
>  
>  /* Only for EXYNOS4210 */
>  #define S5P_CMU_CLKSTOP_LCD1_LOWPWR	0x1154
>