linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Axel Lin <axel.lin@ingics.com>
Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com>,
	Lee Jones <lee.jones@linaro.org>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Maxime Coquelin <maxime.coquelin@st.com>,
	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>,
	patrice CHOTARD <patrice.chotard@st.com>
Subject: Re: [RFC][PATCH 2/2] phy: miphy365x: Convert to use phy.h instead of phy-miphy365x.h
Date: Thu, 26 Mar 2015 04:41:48 +0530	[thread overview]
Message-ID: <551340B4.2010001@ti.com> (raw)
In-Reply-To: <CAFRkauBNEgMiQtHxVuz_rif7+AWBjXoLVydidzjxK-oMWYxCrA@mail.gmail.com>

+Maxime, Srinivas, patrice

On Monday 09 March 2015 06:55 PM, Axel Lin wrote:
> 2015-03-09 19:44 GMT+08:00 Kishon Vijay Abraham I <kishon@ti.com>:
>> Hi,
>>
>>
>> On Thursday 05 March 2015 07:27 AM, Axel Lin wrote:
>>>
>>> The defines in phy-miphy365x.h are all covered in phy.h:
>>>
>>> MIPHY_TYPE_SATA == PHY_TYPE_STA
>>> MIPHY_TYPE_PCIE == PHY_TYPE_PCIE
>>> MIPPHY_TYPE_USB == PHY_TYPE_USB2
>>>
>>> So covert to use phy.h and then delete phy-miphy365x.h.
>>>
>>> Signed-off-by: Axel Lin <axel.lin@ingics.com>
>>> ---
>>>   Documentation/devicetree/bindings/ata/ahci-st.txt       |  2 +-
>>>   Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
>>>   arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
>>>   drivers/phy/phy-miphy365x.c                             | 14
>>> +++++++-------
>>>   include/dt-bindings/phy/phy-miphy365x.h                 | 14
>>> --------------
>>>   5 files changed, 14 insertions(+), 28 deletions(-)
>>>   delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt
>>> b/Documentation/devicetree/bindings/ata/ahci-st.txt
>>> index 0574a77..070748b 100644
>>> --- a/Documentation/devicetree/bindings/ata/ahci-st.txt
>>> +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt
>>> @@ -21,7 +21,7 @@ Example:
>>>                 reg             = <0xfe380000 0x1000>;
>>>                 interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
>>>                 interrupt-names = "hostc";
>>> -               phys            = <&miphy365x_phy MIPHY_PORT_0
>>> MIPHY_TYPE_SATA>;
>>> +               phys            = <&miphy365x_phy MIPHY_PORT_0
>>> PHY_TYPE_SATA>;
>>>                 phy-names       = "ahci_phy";
>>>                 resets          = <&powerdown STIH416_SATA0_POWERDOWN>,
>>>                                   <&softreset STIH416_SATA0_SOFTRESET>;
>>> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> index 9802d5d..087294d 100644
>>> --- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
>>> @@ -20,8 +20,8 @@ Required nodes        :  A sub-node is required for each
>>> channel the controller
>>>   Required properties (port (child) node):
>>>   - #phy-cells  : Should be 1 (See second example)
>>>                   Cell after port phandle is device type from:
>>> -                       - MIPHY_TYPE_SATA
>>> -                       - MIPHY_TYPE_PCI
>>> +                       - PHY_TYPE_SATA
>>> +                       - PHY_TYPE_PCIE
>>>   - reg         : Address and length of register sets for each device in
>>>                   "reg-names"
>>>   - reg-names     : The names of the register addresses corresponding to
>>> the
>>> @@ -68,10 +68,10 @@ property, containing a phandle to the phy port node
>>> and a device type.
>>>
>>>   Example:
>>>
>>> -#include <dt-bindings/phy/phy-miphy365x.h>
>>> +#include <dt-bindings/phy/phy.h>
>>>
>>>         sata0: sata@fe380000 {
>>>                 ...
>>> -               phys      = <&phy_port0 MIPHY_TYPE_SATA>;
>>> +               phys      = <&phy_port0 PHY_TYPE_SATA>;
>>>                 ...
>>>         };
>>> diff --git a/arch/arm/boot/dts/stih416.dtsi
>>> b/arch/arm/boot/dts/stih416.dtsi
>>> index ea28eba..eeb7afe 100644
>>> --- a/arch/arm/boot/dts/stih416.dtsi
>>> +++ b/arch/arm/boot/dts/stih416.dtsi
>>
>>
>> Can you split the patch so that I can queue the PHY part?
> 
> In my opinion, apply the patch as is should be fine and we don't have any
> build breakage. I think the change in each file is pretty trivial and won't
> cause problem. otherwise, I will have to send patches for the conversion
> in each file and then wait until all patches are merged. Then send another
> patch to delete include/dt-bindings/phy/phy-miphy365x.h.

Okay. I can queue after getting Ack from arch/arm/boot/dts/sti* maintainers.

Cheers
Kishon

  reply	other threads:[~2015-03-25 23:12 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-05  1:52 [PATCH 1/2] phy: miphy365x: Convert to devm_kcalloc and fix wrong sizof Axel Lin
2015-03-05  1:57 ` [RFC][PATCH 2/2] phy: miphy365x: Convert to use phy.h instead of phy-miphy365x.h Axel Lin
2015-03-05  7:54   ` Lee Jones
2015-03-09 11:44   ` Kishon Vijay Abraham I
2015-03-09 13:25     ` Axel Lin
2015-03-25 23:11       ` Kishon Vijay Abraham I [this message]
2015-03-26  8:48         ` Patrice Chotard
2015-03-05  7:53 ` [PATCH 1/2] phy: miphy365x: Convert to devm_kcalloc and fix wrong sizof Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=551340B4.2010001@ti.com \
    --to=kishon@ti.com \
    --cc=alexandre.torgue@st.com \
    --cc=axel.lin@ingics.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gabriel.fernandez@st.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.coquelin@st.com \
    --cc=patrice.chotard@st.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).