Re: [RFC PATCH 2/2] ARM: EXYNOS: Make sure that the Exynos5420 MDMA0 clock is enabled during suspend

[Javier Martinez Canillas <javier.martinez@collabora.co.uk>]

Hello Sylwester,

Thanks a lot for your feedback.

On 03/27/2015 03:36 PM, Sylwester Nawrocki wrote:
>>   * GIC wake-up support
>> @@ -374,6 +376,16 @@ static void exynos5420_pm_prepare(void)
>>  {
>>  	unsigned int tmp;
>>  
>> +	/*
>> +	 * Exynos5420 requires the MDMA0 controller clock to be
>> +	 * ungated on suspend in order to be resumed correctly.
>> +	 */
>> +	clk = clk_get(NULL, "mdma0");
>> +	if (IS_ERR(clk))
>> +		pr_warn("Failed to get mdma0 clk (%ld)\n", PTR_ERR(clk));
> 
> I suppose you want this clk_get() call in exynos_pm_init(), now there

Well I wanted to do it in an exynos5420 specific function to avoid
having an of_machine_is_compatible("samsung,exynos5420") but I can
move there if that is preferred.

> is clk_put() missing and this will cause a memory leak.
>

duh, I wonder how I missed that. Thanks for pointing it out.

>> +	else
>> +		clk_prepare_enable(clk);
>> +
>>  	/* Set wake-up mask registers */
>>  	exynos_pm_set_wakeup_mask();
>>  
>> @@ -516,6 +528,9 @@ static void exynos5420_pm_resume(void)
>>  {
>>  	unsigned long tmp;
>>  
>> +	if (!IS_ERR_OR_NULL(clk))
> 
> This should be just IS_ERR().
>

Ok.

>> +		clk_disable_unprepare(clk);
>> +
>>  	/* Restore the CPU0 low power state register */
>>  	tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
>>  	pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
> 
> --
> Regards,
> Sylwester
> 

Best regards,
Javier