Re: [PATCH v2 1/4] extcon: usb-gpio: register extcon device before IRQ registration

[Chanwoo Choi <cw00.choi@samsung.com>]

Hi Roger,

On 04/01/2015 08:58 PM, Roger Quadros wrote:
> Hi Chanwoo,
> 
> On 01/04/15 10:23, Robert Baldyga wrote:
>> IRQ handler touches info->edev, so if interrupt occurs before extcon
>> device initialization it can cause NULL pointer dereference. Doing extcon
>> initialization before IRQ handler registration fixes this problem.
>>
>> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
>> Acked-by: Roger Quadros <rogerq@ti.com>
> 
> Can you please pick this patch for 4.1 (or 4.1-rc) as it fixes a bug. Thanks.

I already sent pull request for v4.1 and merged it.
I'll send this patch for 4.1-rc.

Thanks,
Chanwoo Choi

> 
> cheers,
> -roger
> 
>> ---
>>  drivers/extcon/extcon-usb-gpio.c | 24 ++++++++++++------------
>>  1 file changed, 12 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
>> index 3f0bad3..f6aa99d 100644
>> --- a/drivers/extcon/extcon-usb-gpio.c
>> +++ b/drivers/extcon/extcon-usb-gpio.c
>> @@ -119,6 +119,18 @@ static int usb_extcon_probe(struct platform_device *pdev)
>>  		return PTR_ERR(info->id_gpiod);
>>  	}
>>  
>> +	info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
>> +	if (IS_ERR(info->edev)) {
>> +		dev_err(dev, "failed to allocate extcon device\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	ret = devm_extcon_dev_register(dev, info->edev);
>> +	if (ret < 0) {
>> +		dev_err(dev, "failed to register extcon device\n");
>> +		return ret;
>> +	}
>> +
>>  	ret = gpiod_set_debounce(info->id_gpiod,
>>  				 USB_GPIO_DEBOUNCE_MS * 1000);
>>  	if (ret < 0)
>> @@ -142,18 +154,6 @@ static int usb_extcon_probe(struct platform_device *pdev)
>>  		return ret;
>>  	}
>>  
>> -	info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
>> -	if (IS_ERR(info->edev)) {
>> -		dev_err(dev, "failed to allocate extcon device\n");
>> -		return -ENOMEM;
>> -	}
>> -
>> -	ret = devm_extcon_dev_register(dev, info->edev);
>> -	if (ret < 0) {
>> -		dev_err(dev, "failed to register extcon device\n");
>> -		return ret;
>> -	}
>> -
>>  	platform_set_drvdata(pdev, info);
>>  	device_init_wakeup(dev, 1);
>>  
>>
> 
>