Re: [PATCH] iio: adc: spmi-vadc: Fix overflow in output value normalization

[Jonathan Cameron <jic23@kernel.org>]

On 17/04/15 15:51, Ivan T. Ivanov wrote:
> With 'dx' equal to 0.625V and 15 bit ADC, calculations overflow
> when difference against GND is ~20% of the ADC range. Fix this.
> 
> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan
>
> ---
>  drivers/iio/adc/qcom-spmi-vadc.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
> index 3211729..0c4618b 100644
> --- a/drivers/iio/adc/qcom-spmi-vadc.c
> +++ b/drivers/iio/adc/qcom-spmi-vadc.c
> @@ -18,6 +18,7 @@
>  #include <linux/iio/iio.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
> +#include <linux/math64.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
> @@ -471,11 +472,11 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
>  			  const struct vadc_channel_prop *prop, u16 adc_code)
>  {
>  	const struct vadc_prescale_ratio *prescale;
> -	s32 voltage;
> +	s64 voltage;
> 
>  	voltage = adc_code - vadc->graph[prop->calibration].gnd;
>  	voltage *= vadc->graph[prop->calibration].dx;
> -	voltage = voltage / vadc->graph[prop->calibration].dy;
> +	voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
> 
>  	if (prop->calibration == VADC_CALIB_ABSOLUTE)
>  		voltage += vadc->graph[prop->calibration].dx;
> @@ -487,7 +488,7 @@ static s32 vadc_calibrate(struct vadc_priv *vadc,
> 
>  	voltage = voltage * prescale->den;
> 
> -	return voltage / prescale->num;
> +	return div64_s64(voltage, prescale->num);
>  }
> 
>  static int vadc_decimation_from_dt(u32 value)
> --
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>