[PATCH] Added device id to usb serial cypress_m8 for Prior Scientific OptiScan2

[PATCH] Added device id to usb serial cypress_m8 for Prior Scientific OptiScan2

[Ian Stakenvicius]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Prior Scientific OptiScan2 controllers contain a
Cypress CY7C64013-SXC chip for RS232 conversion,
which can be served by the cypress_m8 device driver.

Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
- ---
 drivers/usb/serial/cypress_m8.c | 2 ++
 drivers/usb/serial/cypress_m8.h | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/usb/serial/cypress_m8.c
b/drivers/usb/serial/cypress_m8.c
index 01bf533..5bc07d8 100644
- --- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -63,6 +63,7 @@ static const struct usb_device_id
id_table_earthmate[] = {
  static const struct usb_device_id id_table_cyphidcomrs232[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+	{ USB_DEVICE(VENDOR_ID_PRIORSCIENTIFIC, PRODUCT_ID_OPTISCAN2) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ }						/* Terminating entry */
@@ -77,6 +78,7 @@ static const struct usb_device_id
id_table_combined[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+	{ USB_DEVICE(VENDOR_ID_PRIORSCIENTIFIC, PRODUCT_ID_OPTISCAN2) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
diff --git a/drivers/usb/serial/cypress_m8.h
b/drivers/usb/serial/cypress_m8.h
index 119d2e1..1d5e1d9 100644
- --- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
 #define VENDOR_ID_CYPRESS		0x04b4
 #define PRODUCT_ID_CYPHIDCOM		0x5500
 +/* Cypress HID->COM RS232 Adapter, used by Prior Scientific
controllers */
+#define VENDOR_ID_PRIORSCIENTIFIC	0x10db
+#define PRODUCT_ID_OPTISCAN2		0x1234
+
 /* FRWD Dongle - a GPS sports watch */
 #define VENDOR_ID_FRWD			0x6737
 #define PRODUCT_ID_CYPHIDCOM_FRWD	0x0001
- -- 
2.0.5

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iF4EAREIAAYFAlVI6WIACgkQ2ugaI38ACPDmCwEAmFVIcmYE8/x8IomccagBV1if
sZ7erjiBCVxlD+GR/kgA/R7lFvubg/qrbPRKEK5USXyGFl/Ub6beSFw1j+IOJMMY
=Dvnb
-----END PGP SIGNATURE-----

Re: [PATCH] Added device id to usb serial cypress_m8 for Prior Scientific OptiScan2

[Johan Hovold]

On Tue, May 05, 2015 at 12:01:38PM -0400, Ian Stakenvicius wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
> 
> Prior Scientific OptiScan2 controllers contain a
> Cypress CY7C64013-SXC chip for RS232 conversion,
> which can be served by the cypress_m8 device driver.
> 
> Signed-off-by: Ian Stakenvicius <axs@gentoo.org>

This patch is whitespace damaged. You should drop the PGP signature, and
try sending it to yourself first and make sure it applies with git am.

You should also include the patch revision and a subsystem prefix in the
Subject when resending, e.g.

	[PATCH v3] USB: cypress_m8: add ...

One more try?

Thanks,
Johan