public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK value
@ 2015-04-02  8:01 Yoshihiro Shimoda
  2015-05-08  7:24 ` Yoshihiro Shimoda
  0 siblings, 1 reply; 4+ messages in thread
From: Yoshihiro Shimoda @ 2015-04-02  8:01 UTC (permalink / raw)
  To: kishon; +Cc: linux-kernel, linux-sh, Yoshihiro Shimoda

According to the technical update (No. TN-RCS-B011A/E), the UGSTS LOCK
bit location is bit 8, not bits 1 and 0. It also says that the register
address offset of UGSTS is 0x88, not 0x90.
So, this patch fixes the USBHS_UGSTS_LOCK value and some comments.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/phy/phy-rcar-gen2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index 778276a..97d45f4 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -23,7 +23,7 @@
 #define USBHS_LPSTS			0x02
 #define USBHS_UGCTRL			0x80
 #define USBHS_UGCTRL2			0x84
-#define USBHS_UGSTS			0x88	/* The manuals have 0x90 */
+#define USBHS_UGSTS			0x88	/* From technical update */
 
 /* Low Power Status register (LPSTS) */
 #define USBHS_LPSTS_SUSPM		0x4000
@@ -41,7 +41,7 @@
 #define USBHS_UGCTRL2_USB0SEL_HS_USB	0x00000030
 
 /* USB General status register (UGSTS) */
-#define USBHS_UGSTS_LOCK		0x00000300 /* The manuals have 0x3 */
+#define USBHS_UGSTS_LOCK		0x00000100 /* From technical update */
 
 #define PHYS_PER_CHANNEL	2
 
-- 
1.9.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2015-05-08  9:35 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-02  8:01 [PATCH] phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK value Yoshihiro Shimoda
2015-05-08  7:24 ` Yoshihiro Shimoda
2015-05-08  7:41   ` Kishon Vijay Abraham I
2015-05-08  9:34     ` Yoshihiro Shimoda

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox