Re: [PATCH 1/5] phy: iproc-mdio: Define DT binding

[Kishon Vijay Abraham I <kishon@ti.com>]

Hi,

On Wednesday 20 May 2015 06:53 AM, Ray Jui wrote:
> Define device tree bindings for iProc MDC/MDIO interface


Fix $subject to something like 'dt_bindings: Add iProc MDC/MDIO PHY
bindings'

>
> Signed-off-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>
> ---
>   .../devicetree/bindings/phy/brcm,iproc-mdio.txt    |   15 +++++++++++++++
>   1 file changed, 15 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/phy/brcm,iproc-mdio.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/phy/brcm,iproc-mdio.txt
> new file mode 100644
> index 0000000..dce7644
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/brcm,iproc-mdio.txt
> @@ -0,0 +1,15 @@
> +Broadcom iProc MDC/MDIO interface
> +
> +The iProc MDC/MDIO interface is found on various iProc based SoCs and used to
> +communicate with various types of Serdes/PHYs including Ethernet, PCIe, USB,
> +and etc.

This sounds like it isn't a PHY exactly but a bus to which other PHYs are 
connected?

Thanks
Kishon