[PATCH 0/2] turbostat, support CPU0 hotplug

[PATCH 0/2] turbostat, support CPU0 hotplug

[Prarit Bhargava]

turbostat does not function properly on systems that support CPU0 hotplug.
When running turbostat on these systems the following error is seen.

[root@intel-chiefriver-04 ~]# turbostat ls
turbostat: no /dev/cpu/0/msr
Try "# modprobe msr": No such file or directory

This happens because in many places turbostat hardcodes 0, and calls
to check_dev_msr(), for example, will fail if CPU0 has been removed.

This patchset adds functionality to determine the lowest found cpu on the
system, and to use that value instead of 0.  This patchset also  moves
setup_all_buffers() to the beginning of the turbostat_init() so that
set_base_cpu() can take advantage of topo.max_cpu_num which is set in
setup_all_buffers().

After this change, on a system that has CPU0 removed,

[root@prarit ~]# ./turbostat -d -d ls
turbostat version 4.5 2 Apr, 2015 - Len Brown <lenb@kernel.org>
num_cpus 7 max_cpu_num 7
cpu0 NOT PRESENT
cpu 1 pkg 0 core 0
cpu 2 pkg 0 core 1
cpu 3 pkg 0 core 1
cpu 4 pkg 0 core 2
cpu 5 pkg 0 core 2
cpu 6 pkg 0 core 3
cpu 7 pkg 0 core 3
<snip>
anaconda-ks.cfg  README  turbostat
Core     CPU Avg_MHz   %Busy Bzy_MHz TSC_MHz     SMI  CPU%c1  CPU%c3  CP
   -       -     492   14.20    3462    2634       0   18.90    0.00    
   0       1     353    9.95    3552    2645       0    9.68    0.00    
   1       2     217    7.70    2814    2614       0   64.63    0.00    
   1       3    2006   57.20    3507    2660       0   15.61
   2       4     120    3.37    3570    2649       0   10.95    0.00    
   2       5     155    4.22    3679    2631       0    9.48
   3       6     296    8.38    3530    2620       0   11.07    0.00    
   3       7     296    8.15    3630    2617       0   11.22
0.001160 sec

I have additionally tested various other hotplug configurations to make sure
that turbostat behaves correctly in those situations as well.

Prarit Bhargava (2):
  turbostat, add base_cpu
  turbostat, add set_base_cpu()

 tools/power/x86/turbostat/turbostat.c | 49 +++++++++++++++++++++++++----------
 1 file changed, 35 insertions(+), 14 deletions(-)

-- 
1.8.3.1

[PATCH 1/2] turbostat, add base_cpu

[Prarit Bhargava]

turbostat does not function properly on systems that support CPU0 hotplug.
When running turbostat on these systems the following error is seen.

[root@intel-chiefriver-04 ~]# turbostat ls
turbostat: no /dev/cpu/0/msr
Try "# modprobe msr": No such file or directory

This happens because /dev/cpu/0 is hardcoded in several locations in the
turbostat code.

This patch adds base_cpu, which will be used to track the lowest cpu number
on the system.  This patch does not add any functionality differences and
sets base_cpu to 0.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
---
 tools/power/x86/turbostat/turbostat.c | 31 ++++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index bac98ca..8c2e761 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -91,6 +91,7 @@ unsigned int do_gfx_perf_limit_reasons;
 unsigned int do_ring_perf_limit_reasons;
 unsigned int crystal_hz;
 unsigned long long tsc_hz;
+int base_cpu = 0;
 
 #define RAPL_PKG		(1 << 0)
 					/* 0x610 MSR_PKG_POWER_LIMIT */
@@ -1150,7 +1151,7 @@ dump_nhm_platform_info(void)
 	unsigned long long msr;
 	unsigned int ratio;
 
-	get_msr(0, MSR_NHM_PLATFORM_INFO, &msr);
+	get_msr(base_cpu, MSR_NHM_PLATFORM_INFO, &msr);
 
 	fprintf(stderr, "cpu0: MSR_NHM_PLATFORM_INFO: 0x%08llx\n", msr);
 
@@ -1162,7 +1163,7 @@ dump_nhm_platform_info(void)
 	fprintf(stderr, "%d * %.0f = %.0f MHz base frequency\n",
 		ratio, bclk, ratio * bclk);
 
-	get_msr(0, MSR_IA32_POWER_CTL, &msr);
+	get_msr(base_cpu, MSR_IA32_POWER_CTL, &msr);
 	fprintf(stderr, "cpu0: MSR_IA32_POWER_CTL: 0x%08llx (C1E auto-promotion: %sabled)\n",
 		msr, msr & 0x2 ? "EN" : "DIS");
 
@@ -1175,7 +1176,7 @@ dump_hsw_turbo_ratio_limits(void)
 	unsigned long long msr;
 	unsigned int ratio;
 
-	get_msr(0, MSR_TURBO_RATIO_LIMIT2, &msr);
+	get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT2, &msr);
 
 	fprintf(stderr, "cpu0: MSR_TURBO_RATIO_LIMIT2: 0x%08llx\n", msr);
 
@@ -1197,7 +1198,7 @@ dump_ivt_turbo_ratio_limits(void)
 	unsigned long long msr;
 	unsigned int ratio;
 
-	get_msr(0, MSR_TURBO_RATIO_LIMIT1, &msr);
+	get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &msr);
 
 	fprintf(stderr, "cpu0: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", msr);
 
@@ -1249,7 +1250,7 @@ dump_nhm_turbo_ratio_limits(void)
 	unsigned long long msr;
 	unsigned int ratio;
 
-	get_msr(0, MSR_TURBO_RATIO_LIMIT, &msr);
+	get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr);
 
 	fprintf(stderr, "cpu0: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", msr);
 
@@ -1300,7 +1301,7 @@ dump_nhm_cst_cfg(void)
 {
 	unsigned long long msr;
 
-	get_msr(0, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
+	get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
 
 #define SNB_C1_AUTO_UNDEMOTE              (1UL << 27)
 #define SNB_C3_AUTO_UNDEMOTE              (1UL << 28)
@@ -1594,8 +1595,10 @@ restart:
 void check_dev_msr()
 {
 	struct stat sb;
+	char pathname[32];
 
-	if (stat("/dev/cpu/0/msr", &sb))
+	sprintf(pathname, "/dev/cpu/%d/msr", base_cpu);
+	if (stat(pathname, &sb))
  		if (system("/sbin/modprobe msr > /dev/null 2>&1"))
 			err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
 }
@@ -1608,6 +1611,7 @@ void check_permissions()
 	cap_user_data_t cap_data = &cap_data_data;
 	extern int capget(cap_user_header_t hdrp, cap_user_data_t datap);
 	int do_exit = 0;
+	char pathname[32];
 
 	/* check for CAP_SYS_RAWIO */
 	cap_header->pid = getpid();
@@ -1622,7 +1626,8 @@ void check_permissions()
 	}
 
 	/* test file permissions */
-	if (euidaccess("/dev/cpu/0/msr", R_OK)) {
+	sprintf(pathname, "/dev/cpu/%d/msr", base_cpu);
+	if (euidaccess(pathname, R_OK)) {
 		do_exit++;
 		warn("/dev/cpu/0/msr open failed, try chown or chmod +r /dev/cpu/*/msr");
 	}
@@ -1704,7 +1709,7 @@ int probe_nhm_msrs(unsigned int family, unsigned int model)
 	default:
 		return 0;
 	}
-	get_msr(0, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
+	get_msr(base_cpu, MSR_NHM_SNB_PKG_CST_CFG_CTL, &msr);
 
 	pkg_cstate_limit = pkg_cstate_limits[msr & 0xF];
 
@@ -1925,7 +1930,7 @@ double get_tdp(model)
 	unsigned long long msr;
 
 	if (do_rapl & RAPL_PKG_POWER_INFO)
-		if (!get_msr(0, MSR_PKG_POWER_INFO, &msr))
+		if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr))
 			return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units;
 
 	switch (model) {
@@ -2006,7 +2011,7 @@ void rapl_probe(unsigned int family, unsigned int model)
 	}
 
 	/* units on package 0, verify later other packages match */
-	if (get_msr(0, MSR_RAPL_POWER_UNIT, &msr))
+	if (get_msr(base_cpu, MSR_RAPL_POWER_UNIT, &msr))
 		return;
 
 	rapl_power_units = 1.0 / (1 << (msr & 0xF));
@@ -2340,7 +2345,7 @@ double slm_bclk(void)
 	unsigned int i;
 	double freq;
 
-	if (get_msr(0, MSR_FSB_FREQ, &msr))
+	if (get_msr(base_cpu, MSR_FSB_FREQ, &msr))
 		fprintf(stderr, "SLM BCLK: unknown\n");
 
 	i = msr & 0xf;
@@ -2408,7 +2413,7 @@ int set_temperature_target(struct thread_data *t, struct core_data *c, struct pk
 	if (!do_nhm_platform_info)
 		goto guess;
 
-	if (get_msr(0, MSR_IA32_TEMPERATURE_TARGET, &msr))
+	if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr))
 		goto guess;
 
 	target_c_local = (msr >> 16) & 0xFF;
-- 
1.8.3.1

[PATCH 2/2] turbostat, add set_base_cpu()

[Prarit Bhargava]

turbostat does not function properly on systems that support CPU0 hotplug.
When running turbostat on these systems the following error is seen.

[root@intel-chiefriver-04 ~]# turbostat ls
turbostat: no /dev/cpu/0/msr
Try "# modprobe msr": No such file or directory

This happens because base_cpu is set to 0 in the turbostat code and calls
to check_dev_msr() will fail if CPU0 has been removed.

This patchset adds functionality to set the value of base_cpu to the lowest
found cpu on the system.  This patch moves setup_all_buffers() to the
beginning of the turbostat_init() so that set_base_cpu() can take advantage
of topo.max_cpu_num which is set in setup_all_buffers().

After this change, on a system that has CPU0 removed,

[root@prarit ~]# ./turbostat -d -d ls
turbostat version 4.5 2 Apr, 2015 - Len Brown <lenb@kernel.org>
num_cpus 7 max_cpu_num 7
cpu0 NOT PRESENT
cpu 1 pkg 0 core 0
cpu 2 pkg 0 core 1
cpu 3 pkg 0 core 1
cpu 4 pkg 0 core 2
cpu 5 pkg 0 core 2
cpu 6 pkg 0 core 3
cpu 7 pkg 0 core 3
<snip>
anaconda-ks.cfg  README  turbostat
    Core     CPU Avg_MHz   %Busy Bzy_MHz TSC_MHz     SMI  CPU%c1  CPU%c3  CPU%c6  CPU%c7 CoreTmp  PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
       -       -     492   14.20    3462    2634       0   18.90    0.00    0.00   68.63      27      27    0.00    0.00    0.00    0.00   17.65   12.69    0.00
       0       1     353    9.95    3552    2645       0    9.68    0.00    0.00   80.37      27      27    0.00    0.00    0.00    0.00   17.65   12.69    0.00
       1       2     217    7.70    2814    2614       0   64.63    0.00    0.00   27.68      26
       1       3    2006   57.20    3507    2660       0   15.61
       2       4     120    3.37    3570    2649       0   10.95    0.00    0.00   85.69      25
       2       5     155    4.22    3679    2631       0    9.48
       3       6     296    8.38    3530    2620       0   11.07    0.00    0.00   80.55      17
       3       7     296    8.15    3630    2617       0   11.22
0.001160 sec

I have additionally tested various other hotplug configurations to make sure
that turbostat behaves correctly in those situations as well.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
---
 tools/power/x86/turbostat/turbostat.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 8c2e761..5cd94a7 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -91,7 +91,7 @@ unsigned int do_gfx_perf_limit_reasons;
 unsigned int do_ring_perf_limit_reasons;
 unsigned int crystal_hz;
 unsigned long long tsc_hz;
-int base_cpu = 0;
+int base_cpu = -1;
 
 #define RAPL_PKG		(1 << 0)
 					/* 0x610 MSR_PKG_POWER_LIMIT */
@@ -2790,13 +2790,29 @@ void setup_all_buffers(void)
 	for_all_proc_cpus(initialize_counters);
 }
 
+void set_base_cpu(void)
+{
+	int cpu;
+
+	for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) {
+		if (cpu_is_not_present(cpu))
+			continue;
+		base_cpu = cpu;
+		break;
+	}
+
+	if (base_cpu == -1)
+		err(-ENODEV, "No valid cpus found");
+}
+
 void turbostat_init()
 {
+	setup_all_buffers();
+	set_base_cpu();
 	check_dev_msr();
 	check_permissions();
 	process_cpuid();
 
-	setup_all_buffers();
 
 	if (debug)
 		for_all_cpus(print_epb, ODD_COUNTERS);
-- 
1.8.3.1

RE: [PATCH 2/2] turbostat, add set_base_cpu()

[Brown, Len]

> +void set_base_cpu(void)
> +{
> +	int cpu;
> +
> +	for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) {
> +		if (cpu_is_not_present(cpu))
> +			continue;
> +		base_cpu = cpu;
> +		break;
> +	}
> +
> +	if (base_cpu == -1)
> +		err(-ENODEV, "No valid cpus found");
> +}


cpu0 hard-coding is indeed arbitrary.
However, so is this proposed replacement, base_cpu.
Either may not match where turbostat is currently running,
and thus could provoke unnecessary cross-calls to get there.

I think it would be better to ask getcpu(2) where we are already running,
and simply use that one.  I think we can call it once and cache it,
as you proposed, rather than multiple system calls.

thanks,
-Len

ps. patches to turbostat should go to linux-pm@vger.kernel.org

Re: [PATCH 2/2] turbostat, add set_base_cpu()

[Prarit Bhargava]

On 05/22/2015 11:55 AM, Brown, Len wrote:
>> +void set_base_cpu(void)
>> +{
>> +	int cpu;
>> +
>> +	for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) {
>> +		if (cpu_is_not_present(cpu))
>> +			continue;
>> +		base_cpu = cpu;
>> +		break;
>> +	}
>> +
>> +	if (base_cpu == -1)
>> +		err(-ENODEV, "No valid cpus found");
>> +}
> 
> 
> cpu0 hard-coding is indeed arbitrary.
> However, so is this proposed replacement, base_cpu.
> Either may not match where turbostat is currently running,
> and thus could provoke unnecessary cross-calls to get there.
> 
> I think it would be better to ask getcpu(2) where we are already running,
> and simply use that one.  I think we can call it once and cache it,
> as you proposed, rather than multiple system calls.
> 

Okay, will do that in a v2.

P.

> thanks,
> -Len
> 
> ps. patches to turbostat should go to linux-pm@vger.kernel.org

Oh -- I ran get_maintainer.pl on this patchset and linux-pm didn't show up.
I'll send a patch to fix that...

P.

> 
> 

Re: [PATCH 2/2] turbostat, add set_base_cpu()

[Prarit Bhargava]

On 05/22/2015 11:55 AM, Brown, Len wrote:
>> +void set_base_cpu(void)
>> +{
>> +	int cpu;
>> +
>> +	for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) {
>> +		if (cpu_is_not_present(cpu))
>> +			continue;
>> +		base_cpu = cpu;
>> +		break;
>> +	}
>> +
>> +	if (base_cpu == -1)
>> +		err(-ENODEV, "No valid cpus found");
>> +}
> 
> 
> cpu0 hard-coding is indeed arbitrary.
> However, so is this proposed replacement, base_cpu.
> Either may not match where turbostat is currently running,
> and thus could provoke unnecessary cross-calls to get there.
> 
> I think it would be better to ask getcpu(2) where we are already running,
> and simply use that one.  I think we can call it once and cache it,
> as you proposed, rather than multiple system calls.

Any objection to sched_getcpu()?  That way the code is simply

	base_cpu = sched_getcpu();

	if (base_cpu == -1)
		err(-ENODEV, "No valid cpus found");

P.

> 
> thanks,
> -Len
> 
> ps. patches to turbostat should go to linux-pm@vger.kernel.org
> 
> 

RE: [PATCH 2/2] turbostat, add set_base_cpu()

[Brown, Len]

> -----Original Message-----
> From: Prarit Bhargava [mailto:prarit@redhat.com]
> Sent: Friday, May 22, 2015 6:30 PM
> To: Brown, Len
> Cc: linux-kernel@vger.kernel.org; linux-pm@vger.kernel.org; Semin, Andrey
> Subject: Re: [PATCH 2/2] turbostat, add set_base_cpu()
> 
> 
> 
> On 05/22/2015 11:55 AM, Brown, Len wrote:
> >> +void set_base_cpu(void)
> >> +{
> >> +	int cpu;
> >> +
> >> +	for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) {
> >> +		if (cpu_is_not_present(cpu))
> >> +			continue;
> >> +		base_cpu = cpu;
> >> +		break;
> >> +	}
> >> +
> >> +	if (base_cpu == -1)
> >> +		err(-ENODEV, "No valid cpus found");
> >> +}
> >
> >
> > cpu0 hard-coding is indeed arbitrary.
> > However, so is this proposed replacement, base_cpu.
> > Either may not match where turbostat is currently running,
> > and thus could provoke unnecessary cross-calls to get there.
> >
> > I think it would be better to ask getcpu(2) where we are already
> running,
> > and simply use that one.  I think we can call it once and cache it,
> > as you proposed, rather than multiple system calls.
> 
> Any objection to sched_getcpu()?  That way the code is simply
> 
> 	base_cpu = sched_getcpu();
> 
> 	if (base_cpu == -1)
> 		err(-ENODEV, "No valid cpus found");

Agreed, that is better than invoking the syscall directly,
as we already are using the sched.h interface in this code.

thanks,
-Len

[PATCH 0/2] turbostat, support CPU0 hotplug [v2]

[Prarit Bhargava]

turbostat does not function properly on systems that support CPU0 hotplug.
When running turbostat on these systems the following error is seen.

[root@intel-chiefriver-04 ~]# turbostat ls
turbostat: no /dev/cpu/0/msr
Try "# modprobe msr": No such file or directory

This happens because base_cpu is set to 0 in the turbostat code and calls
to check_dev_msr() will fail if CPU0 has been removed.

This patchset adds functionality to set the default cpu value to the
current running cpu.  This patch moves setup_all_buffers() to the
beginning of the turbostat_init() so that set_base_cpu() can take advantage
of topo.max_cpu_num which is set in setup_all_buffers().

After this change, on a system that has CPU0 removed,

[root@prarit ~]# ./turbostat -d -d ls
turbostat version 4.5 2 Apr, 2015 - Len Brown <lenb@kernel.org>
num_cpus 7 max_cpu_num 7
cpu0 NOT PRESENT
cpu 1 pkg 0 core 0
cpu 2 pkg 0 core 1
cpu 3 pkg 0 core 1
cpu 4 pkg 0 core 2
cpu 5 pkg 0 core 2
cpu 6 pkg 0 core 3
cpu 7 pkg 0 core 3
<snip>
anaconda-ks.cfg  README  turbostat
    Core     CPU Avg_MHz   %Busy Bzy_MHz TSC_MHz     SMI  CPU%c1  CPU%c3  CPU%c6  CPU%c7 CoreTmp  PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
       -       -     492   14.20    3462    2634       0   18.90    0.00    0.00   68.63      27      27    0.00    0.00    0.00    0.00   17.65   12.69    0.00
       0       1     353    9.95    3552    2645       0    9.68    0.00    0.00   80.37      27      27    0.00    0.00    0.00    0.00   17.65   12.69    0.00
       1       2     217    7.70    2814    2614       0   64.63    0.00    0.00   27.68      26
       1       3    2006   57.20    3507    2660       0   15.61
       2       4     120    3.37    3570    2649       0   10.95    0.00    0.00   85.69      25
       2       5     155    4.22    3679    2631       0    9.48
       3       6     296    8.38    3530    2620       0   11.07    0.00    0.00   80.55      17
       3       7     296    8.15    3630    2617       0   11.22
0.001160 sec

I have additionally tested various other hotplug configurations to make sure
that turbostat behaves correctly in those situations as well.

[v2]: use sched_getcpu() to get current cpu

Signed-off-by: Prarit Bhargava <prarit@redhat.com>

Prarit Bhargava (2):
  turbostat, add base_cpu
  turbostat, add set_base_cpu()

 tools/power/x86/turbostat/turbostat.c |   44 ++++++++++++++++++++++-----------
 1 file changed, 30 insertions(+), 14 deletions(-)

-- 
1.7.9.3

[PATCH 2/2] turbostat, add set_base_cpu()

[Prarit Bhargava]

turbostat does not function properly on systems that support CPU0 hotplug.
When running turbostat on these systems the following error is seen.

[root@intel-chiefriver-04 ~]# turbostat ls
turbostat: no /dev/cpu/0/msr
Try "# modprobe msr": No such file or directory

This happens because base_cpu is set to 0 in the turbostat code and calls
to check_dev_msr() will fail if CPU0 has been removed.

This patchset adds functionality to set the value of base_cpu to the lowest
found cpu on the system.  This patch moves setup_all_buffers() to the
beginning of the turbostat_init() so that set_base_cpu() can take advantage
of topo.max_cpu_num which is set in setup_all_buffers().

After this change, on a system that has CPU0 removed,

[root@prarit ~]# ./turbostat -d -d ls
turbostat version 4.5 2 Apr, 2015 - Len Brown <lenb@kernel.org>
num_cpus 7 max_cpu_num 7
cpu0 NOT PRESENT
cpu 1 pkg 0 core 0
cpu 2 pkg 0 core 1
cpu 3 pkg 0 core 1
cpu 4 pkg 0 core 2
cpu 5 pkg 0 core 2
cpu 6 pkg 0 core 3
cpu 7 pkg 0 core 3
<snip>
anaconda-ks.cfg  README  turbostat
    Core     CPU Avg_MHz   %Busy Bzy_MHz TSC_MHz     SMI  CPU%c1  CPU%c3  CPU%c6  CPU%c7 CoreTmp  PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
       -       -     492   14.20    3462    2634       0   18.90    0.00    0.00   68.63      27      27    0.00    0.00    0.00    0.00   17.65   12.69    0.00
       0       1     353    9.95    3552    2645       0    9.68    0.00    0.00   80.37      27      27    0.00    0.00    0.00    0.00   17.65   12.69    0.00
       1       2     217    7.70    2814    2614       0   64.63    0.00    0.00   27.68      26
       1       3    2006   57.20    3507    2660       0   15.61
       2       4     120    3.37    3570    2649       0   10.95    0.00    0.00   85.69      25
       2       5     155    4.22    3679    2631       0    9.48
       3       6     296    8.38    3530    2620       0   11.07    0.00    0.00   80.55      17
       3       7     296    8.15    3630    2617       0   11.22
0.001160 sec

I have additionally tested various other hotplug configurations to make sure
that turbostat behaves correctly in those situations as well.

[v2]: use sched_getcpu() to get current cpu

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
---
 tools/power/x86/turbostat/turbostat.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 8c2e761..8e4ce9f 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -91,7 +91,7 @@ unsigned int do_gfx_perf_limit_reasons;
 unsigned int do_ring_perf_limit_reasons;
 unsigned int crystal_hz;
 unsigned long long tsc_hz;
-int base_cpu = 0;
+int base_cpu = -1;
 
 #define RAPL_PKG		(1 << 0)
 					/* 0x610 MSR_PKG_POWER_LIMIT */
@@ -2790,13 +2790,24 @@ void setup_all_buffers(void)
 	for_all_proc_cpus(initialize_counters);
 }
 
+void set_base_cpu(void)
+{
+	base_cpu = sched_getcpu();
+	if (base_cpu < 0)
+		err(-ENODEV, "No valid cpus found");
+
+	if (debug > 1)
+		fprintf(stderr, "base_cpu = %d\n", base_cpu);
+}
+
 void turbostat_init()
 {
+	setup_all_buffers();
+	set_base_cpu();
 	check_dev_msr();
 	check_permissions();
 	process_cpuid();
 
-	setup_all_buffers();
 
 	if (debug)
 		for_all_cpus(print_epb, ODD_COUNTERS);
-- 
1.7.9.3

Re: [PATCH 2/2] turbostat, add set_base_cpu()

[Len Brown]

> +       base_cpu = sched_getcpu();

looks good.
I combined this w/ the previous patch.
I'll send this with some other patches to linux-pm shortly.
If no problems, I'll offer the bundle of fixes to Linus for -rc5,
else we'll get to it in the next merge window.

thanks,
Len Brown, Intel Open Source Technology Center