RE: [PATCH RESEND 09/25] mpt3sas: Don't send PHYDISK_HIDDEN Raid Action request on SAS2 HBA's

[Kashyap Desai <kashyap.desai@avagotech.com>]

> -----Original Message-----
> From: Hannes Reinecke [mailto:hare@suse.de]
> Sent: Wednesday, November 11, 2015 6:27 PM
> To: Sreekanth Reddy; jejb@kernel.org
> Cc: martin.petersen@oracle.com; linux-scsi@vger.kernel.org;
> JBottomley@Parallels.com; Sathya.Prakash@avagotech.com;
> kashyap.desai@avagotech.com; linux-kernel@vger.kernel.org;
> hch@infradead.org; chaitra.basappa@avagotech.com; suganath-
> prabu.subramani@avagotech.com
> Subject: Re: [PATCH RESEND 09/25] mpt3sas: Don't send PHYDISK_HIDDEN
> Raid Action request on SAS2 HBA's
>
> On 11/11/2015 01:00 PM, Sreekanth Reddy wrote:
> > From: Sreekanth Reddy <sreekanth.reddy@avagotech.com>
> >
> > Don't send PHYDISK_HIDDEN Raid Action request for SAS2 HBA's.
> > Since these HBA's doesn't support this Raid Action.
> >
> > Also enable fast_path only for SAS3 HBA's.
> >
> > Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com>
> > ---
> >  drivers/scsi/mpt3sas/mpt3sas_scsih.c | 19 +++++++++++++++++--
> >  1 file changed, 17 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> > b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> > index a638920..80469d0 100644
> > --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> > +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> > @@ -1165,8 +1165,10 @@ scsih_target_alloc(struct scsi_target *starget)
> >  		if (test_bit(sas_device->handle, ioc->pd_handles))
> >  			sas_target_priv_data->flags |=
> >  			    MPT_TARGET_FLAGS_RAID_COMPONENT;
> > +#ifndef SCSI_MPT2SAS
> >  		if (sas_device->fast_path)
> >  			sas_target_priv_data->flags |=
> MPT_TARGET_FASTPATH_IO;
> > +#endif
> >  	}
> >  	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
> >
> > @@ -3719,11 +3721,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct
> scsi_cmnd *scmd)
> >  		ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
> >
> >  	if (likely(mpi_request->Function ==
> MPI2_FUNCTION_SCSI_IO_REQUEST))
> > {
> > +#ifndef SCSI_MPT2SAS
> >  		if (sas_target_priv_data->flags &
> MPT_TARGET_FASTPATH_IO) {
> >  			mpi_request->IoFlags = cpu_to_le16(scmd-
> >cmd_len |
> >  			    MPI25_SCSIIO_IOFLAGS_FAST_PATH);
> >  			mpt3sas_base_put_smid_fast_path(ioc, smid,
> handle);
> >  		} else
> > +#endif
> >  			mpt3sas_base_put_smid_scsi_io(ioc, smid, handle);
> >  	} else
> >  		mpt3sas_base_put_smid_default(ioc, smid); @@ -5031,8
> +5035,10 @@
> > _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8
> phy_num,
> >  	sas_device->device_info = device_info;
> >  	sas_device->sas_address = sas_address;
> >  	sas_device->phy = sas_device_pg0.PhyNum;
> > +#ifndef SCSI_MPT2SAS
> >  	sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
> >  	    MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
> > +#endif
> >
> >  	if (sas_device_pg0.Flags &
> MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
> >  		sas_device->enclosure_level =
> > @@ -5731,6 +5737,7 @@ _scsih_sas_discovery_event(struct
> MPT3SAS_ADAPTER *ioc,
> >  	}
> >  }
> >
> > +#ifndef SCSI_MPT2SAS
> >  /**
> >   * _scsih_ir_fastpath - turn on fastpath for IR physdisk
> >   * @ioc: per adapter object
> > @@ -5750,7 +5757,6 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER
> *ioc, u16 handle, u8 phys_disk_num)
> >  	u16 ioc_status;
> >  	u32 log_info;
> >
> > -
> >  	mutex_lock(&ioc->scsih_cmds.mutex);
> >
> >  	if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) { @@ -
> 5825,6
> > +5831,8 @@ _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16
> handle, u8 phys_disk_num)
> >  		    FORCE_BIG_HAMMER);
> >  	return rc;
> >  }
> > +/* End of not defined SCSI_MPT2SAS */ #endif
> >
> >  /**
> >   * _scsih_reprobe_lun - reprobing lun @@ -6017,8 +6025,10 @@
> > _scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
> >  	if (!sas_device)
> >  		return;
> >
> > +#ifndef SCSI_MPT2SAS
> >  	/* hiding raid component */
> >  	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
> > +#endif
> >  	if (starget)
> >  		starget_for_each_device(starget, (void *)1,
> _scsih_reprobe_lun);  }
> > @@ -6067,7 +6077,9 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER
> *ioc,
> >  	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
> >  	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
> >  	if (sas_device) {
> > +#ifndef SCSI_MPT2SAS
> >  		_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
> > +#endif
> >  		return;
> >  	}
> >
> > @@ -6091,7 +6103,9 @@ _scsih_sas_pd_add(struct MPT3SAS_ADAPTER
> *ioc,
> >  		mpt3sas_transport_update_links(ioc, sas_address, handle,
> >  		    sas_device_pg0.PhyNum,
> MPI2_SAS_NEG_LINK_RATE_1_5);
> >
> > +#ifndef SCSI_MPT2SAS
> >  	_scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
> > +#endif
> >  	_scsih_add_device(ioc, handle, 0, 1);  }
> >
> > @@ -6202,13 +6216,14 @@ _scsih_sas_ir_config_change_event(struct
> > MPT3SAS_ADAPTER *ioc,
> >
> >  	element = (Mpi2EventIrConfigElement_t *)&event_data-
> >ConfigElement[0];
> >  	if (ioc->shost_recovery) {
> > -
> > +#ifndef SCSI_MPT2SAS
> >  		for (i = 0; i < event_data->NumElements; i++, element++) {
> >  			if (element->ReasonCode ==
> MPI2_EVENT_IR_CHANGE_RC_HIDE)
> >  				_scsih_ir_fastpath(ioc,
> >  					le16_to_cpu(element-
> >PhysDiskDevHandle),
> >  					element->PhysDiskNum);
> >  		}
> > +#endif
> >  		return;
> >  	}
> >  	for (i = 0; i < event_data->NumElements; i++, element++) {
> >
> Why didn't you use 'hba_mpi_version_belonged' here?

Hannes, what have requested is there in "[PATCH 19/25] mpt3sas: Single
driver module which supports both SAS 2.0 & SAS 3.0 HBA's"
Actually patch series till 0-18 are resend by Sreekanth just for quick
reference and/or to avoid any confusion.
New changes are from 19-25. From 0-18 is already picked by Martin. We need
review by tag for patch series from 19 to 25.

` Kashyap

>
> Cheers,
>
> Hannes
> --
> Dr. Hannes Reinecke		               zSeries & Storage
> hare@suse.de			               +49 911 74053 688
> SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
> GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB
21284
> (AG Nürnberg)