public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Dan Carpenter <dan.carpenter@oracle.com>,
	Tomasz Figa <tomasz.figa@gmail.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Kukjin Kim <kgene@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, kernel-janitors@vger.kernel.org
Subject: Re: [patch v2 1/2] pinctrl: samsung: don't truncate the last char
Date: Tue, 23 Jun 2015 08:51:27 +0900	[thread overview]
Message-ID: <55889F7F.9090106@samsung.com> (raw)
In-Reply-To: <20150622151223.GA14156@mwanda>

On 23.06.2015 00:12, Dan Carpenter wrote:
> We were allocating enough space because sizeof("-grp") and
> sizeof("-mux") are both equal to 5 but in the snprintf() we only allowed
> for 4 characters so the last 'p' and 'x' characters were truncated.
> 
> The allocate and sprintf can be done in one step with the kasprintf().
> 
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

Looks good:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof


> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos5440.c b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> index f5619fb..fa84db6 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos5440.c
> @@ -44,9 +44,7 @@
>  #define PIN_NAME_LENGTH		10
>  
>  #define GROUP_SUFFIX		"-grp"
> -#define GSUFFIX_LEN		sizeof(GROUP_SUFFIX)
>  #define FUNCTION_SUFFIX		"-mux"
> -#define FSUFFIX_LEN		sizeof(FUNCTION_SUFFIX)
>  
>  /*
>   * pin configuration type and its value are packed together into a 16-bits.
> @@ -215,12 +213,11 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
>  	 * Allocate memory for pin group name. The pin group name is derived
>  	 * from the node name from which these map entries are be created.
>  	 */
> -	gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
> +	gname = kasprintf(GFP_KERNEL, "%s%s", np->name, GROUP_SUFFIX);
>  	if (!gname) {
>  		dev_err(dev, "failed to alloc memory for group name\n");
>  		goto free_map;
>  	}
> -	snprintf(gname, strlen(np->name) + 4, "%s%s", np->name, GROUP_SUFFIX);
>  
>  	/*
>  	 * don't have config options? then skip over to creating function
> @@ -254,13 +251,12 @@ static int exynos5440_dt_node_to_map(struct pinctrl_dev *pctldev,
>  skip_cfgs:
>  	/* create the function map entry */
>  	if (of_find_property(np, "samsung,exynos5440-pin-function", NULL)) {
> -		fname = kzalloc(strlen(np->name) + FSUFFIX_LEN,	GFP_KERNEL);
> +		fname = kasprintf(GFP_KERNEL,
> +				  "%s%s", np->name, FUNCTION_SUFFIX);
>  		if (!fname) {
>  			dev_err(dev, "failed to alloc memory for func name\n");
>  			goto free_cfg;
>  		}
> -		snprintf(fname, strlen(np->name) + 4, "%s%s", np->name,
> -			 FUNCTION_SUFFIX);
>  
>  		map[*nmaps].data.mux.group = gname;
>  		map[*nmaps].data.mux.function = fname;
> @@ -710,14 +706,12 @@ static int exynos5440_pinctrl_parse_dt(struct platform_device *pdev,
>  		}
>  
>  		/* derive pin group name from the node name */
> -		gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
> -					GFP_KERNEL);
> +		gname = devm_kasprintf(dev, GFP_KERNEL,
> +				       "%s%s", cfg_np->name, GROUP_SUFFIX);
>  		if (!gname) {
>  			dev_err(dev, "failed to alloc memory for group name\n");
>  			return -ENOMEM;
>  		}
> -		snprintf(gname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> -			 GROUP_SUFFIX);
>  
>  		grp->name = gname;
>  		grp->pins = pin_list;
> @@ -731,14 +725,12 @@ skip_to_pin_function:
>  			continue;
>  
>  		/* derive function name from the node name */
> -		fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
> -					GFP_KERNEL);
> +		fname = devm_kasprintf(dev, GFP_KERNEL,
> +				       "%s%s", cfg_np->name, FUNCTION_SUFFIX);
>  		if (!fname) {
>  			dev_err(dev, "failed to alloc memory for func name\n");
>  			return -ENOMEM;
>  		}
> -		snprintf(fname, strlen(cfg_np->name) + 4, "%s%s", cfg_np->name,
> -			 FUNCTION_SUFFIX);
>  
>  		func->name = fname;
>  		func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

  reply	other threads:[~2015-06-22 23:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20150619085203.GO28762@mwanda>
2015-06-22 15:12 ` [patch v2 1/2] pinctrl: samsung: don't truncate the last char Dan Carpenter
2015-06-22 23:51   ` Krzysztof Kozlowski [this message]
2015-07-16  8:21   ` Linus Walleij
2015-06-22 15:13 ` [patch v2 2/2] pinctrl: samsung: remove "out of memory" messages Dan Carpenter
2015-06-22 23:53   ` Krzysztof Kozlowski
2015-07-16  8:22   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55889F7F.9090106@samsung.com \
    --to=k.kozlowski@samsung.com \
    --cc=dan.carpenter@oracle.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=thomas.abraham@linaro.org \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox