[PATCH] VFIO: platform: enable ARM64 build

[PATCH] VFIO: platform: enable ARM64 build

[Eric Auger]

This patch enables building VFIO platform and derivatives on ARM64.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
---
 drivers/vfio/platform/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig
index 1df7477..bb30128 100644
--- a/drivers/vfio/platform/Kconfig
+++ b/drivers/vfio/platform/Kconfig
@@ -1,6 +1,6 @@
 config VFIO_PLATFORM
 	tristate "VFIO support for platform devices"
-	depends on VFIO && EVENTFD && ARM
+	depends on VFIO && EVENTFD && (ARM || ARM64)
 	select VFIO_VIRQFD
 	help
 	  Support for platform devices with VFIO. This is required to make
-- 
1.9.1

Re: [PATCH] VFIO: platform: enable ARM64 build

[Baptiste Reynal]

Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>

Out of curiosity, have you get VFIO running on ARM64 without any problems ?

On Mon, Jun 15, 2015 at 11:13 AM, Eric Auger <eric.auger@linaro.org> wrote:
> This patch enables building VFIO platform and derivatives on ARM64.
>
> Signed-off-by: Eric Auger <eric.auger@linaro.org>
> ---
>  drivers/vfio/platform/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig
> index 1df7477..bb30128 100644
> --- a/drivers/vfio/platform/Kconfig
> +++ b/drivers/vfio/platform/Kconfig
> @@ -1,6 +1,6 @@
>  config VFIO_PLATFORM
>         tristate "VFIO support for platform devices"
> -       depends on VFIO && EVENTFD && ARM
> +       depends on VFIO && EVENTFD && (ARM || ARM64)
>         select VFIO_VIRQFD
>         help
>           Support for platform devices with VFIO. This is required to make
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH] VFIO: platform: enable ARM64 build

[Alex Williamson]

On Mon, 2015-06-22 at 17:56 +0200, Eric Auger wrote:
> Hi Baptiste,
> 
> No unfortunately I don't have any HW to test this currently. I just
> test-compiled this. Up to you to decide whether you prefer waiting for a
> functional test for this. I sent that patch since I expect ARM64 to be
> the main platform where the VFIO platform drivermight be used for
> virtualization use case.

FWIW, I've been occasionally removing the arch condition entirely to
build test on x86 as well.  The Intel VT-d code certainly allows for
devices described by ACPI, which I assume would fall under the platform
category, but I don't know of any systems that do this, let alone any
x86 platform devices that we'd actually want to expose to the user.
Eventually we might want to consider decoupling this from an arch-based
Kconfig option, but we could just as easily let the first non-ARM user
think about that problem.  Thanks,

Alex

> On 06/22/2015 05:49 PM, Baptiste Reynal wrote:
> > Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
> > Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
> > 
> > Out of curiosity, have you get VFIO running on ARM64 without any problems ?
> > 
> > On Mon, Jun 15, 2015 at 11:13 AM, Eric Auger <eric.auger@linaro.org> wrote:
> >> This patch enables building VFIO platform and derivatives on ARM64.
> >>
> >> Signed-off-by: Eric Auger <eric.auger@linaro.org>
> >> ---
> >>  drivers/vfio/platform/Kconfig | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig
> >> index 1df7477..bb30128 100644
> >> --- a/drivers/vfio/platform/Kconfig
> >> +++ b/drivers/vfio/platform/Kconfig
> >> @@ -1,6 +1,6 @@
> >>  config VFIO_PLATFORM
> >>         tristate "VFIO support for platform devices"
> >> -       depends on VFIO && EVENTFD && ARM
> >> +       depends on VFIO && EVENTFD && (ARM || ARM64)
> >>         select VFIO_VIRQFD
> >>         help
> >>           Support for platform devices with VFIO. This is required to make
> >> --
> >> 1.9.1
> >>
> 



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH] VFIO: platform: enable ARM64 build

[Baptiste Reynal]

On Mon, Jun 22, 2015 at 6:26 PM, Alex Williamson
<alex.williamson@redhat.com> wrote:
> On Mon, 2015-06-22 at 17:56 +0200, Eric Auger wrote:
>> Hi Baptiste,
>>
>> No unfortunately I don't have any HW to test this currently. I just
>> test-compiled this. Up to you to decide whether you prefer waiting for a
>> functional test for this. I sent that patch since I expect ARM64 to be
>> the main platform where the VFIO platform drivermight be used for
>> virtualization use case.


On my side, VFIO has been tested on ARM64 using Fastmodels without
problems, we can go ahead with the patch.

>
> FWIW, I've been occasionally removing the arch condition entirely to
> build test on x86 as well.  The Intel VT-d code certainly allows for
> devices described by ACPI, which I assume would fall under the platform
> category, but I don't know of any systems that do this, let alone any
> x86 platform devices that we'd actually want to expose to the user.
> Eventually we might want to consider decoupling this from an arch-based
> Kconfig option, but we could just as easily let the first non-ARM user
> think about that problem.  Thanks,
>
> Alex
>

Indeed, I'd rather wait for someone to show up with some use cases and
tests before removing this condition.

Regards,
Baptiste

>> On 06/22/2015 05:49 PM, Baptiste Reynal wrote:
>> > Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
>> > Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
>> >
>> > Out of curiosity, have you get VFIO running on ARM64 without any problems ?
>> >
>> > On Mon, Jun 15, 2015 at 11:13 AM, Eric Auger <eric.auger@linaro.org> wrote:
>> >> This patch enables building VFIO platform and derivatives on ARM64.
>> >>
>> >> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>> >> ---
>> >>  drivers/vfio/platform/Kconfig | 2 +-
>> >>  1 file changed, 1 insertion(+), 1 deletion(-)
>> >>
>> >> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig
>> >> index 1df7477..bb30128 100644
>> >> --- a/drivers/vfio/platform/Kconfig
>> >> +++ b/drivers/vfio/platform/Kconfig
>> >> @@ -1,6 +1,6 @@
>> >>  config VFIO_PLATFORM
>> >>         tristate "VFIO support for platform devices"
>> >> -       depends on VFIO && EVENTFD && ARM
>> >> +       depends on VFIO && EVENTFD && (ARM || ARM64)
>> >>         select VFIO_VIRQFD
>> >>         help
>> >>           Support for platform devices with VFIO. This is required to make
>> >> --
>> >> 1.9.1
>> >>
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/

Re: [PATCH] VFIO: platform: enable ARM64 build

[Eric Auger]

Hi Baptiste, Alex,
On 06/23/2015 08:56 AM, Baptiste Reynal wrote:
> On Mon, Jun 22, 2015 at 6:26 PM, Alex Williamson
> <alex.williamson@redhat.com> wrote:
>> On Mon, 2015-06-22 at 17:56 +0200, Eric Auger wrote:
>>> Hi Baptiste,
>>>
>>> No unfortunately I don't have any HW to test this currently. I just
>>> test-compiled this. Up to you to decide whether you prefer waiting for a
>>> functional test for this. I sent that patch since I expect ARM64 to be
>>> the main platform where the VFIO platform drivermight be used for
>>> virtualization use case.
> 
> 
> On my side, VFIO has been tested on ARM64 using Fastmodels without
> problems, we can go ahead with the patch.

OK great

> 
>>
>> FWIW, I've been occasionally removing the arch condition entirely to
>> build test on x86 as well.  The Intel VT-d code certainly allows for
>> devices described by ACPI, which I assume would fall under the platform
>> category, but I don't know of any systems that do this, let alone any
>> x86 platform devices that we'd actually want to expose to the user.
>> Eventually we might want to consider decoupling this from an arch-based
>> Kconfig option, but we could just as easily let the first non-ARM user
>> think about that problem.  Thanks,
>>
>> Alex
>>
> 
> Indeed, I'd rather wait for someone to show up with some use cases and
> tests before removing this condition.
OK

Eric
> 
> Regards,
> Baptiste
> 
>>> On 06/22/2015 05:49 PM, Baptiste Reynal wrote:
>>>> Acked-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
>>>> Tested-by: Baptiste Reynal <b.reynal@virtualopensystems.com>
>>>>
>>>> Out of curiosity, have you get VFIO running on ARM64 without any problems ?
>>>>
>>>> On Mon, Jun 15, 2015 at 11:13 AM, Eric Auger <eric.auger@linaro.org> wrote:
>>>>> This patch enables building VFIO platform and derivatives on ARM64.
>>>>>
>>>>> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>>>>> ---
>>>>>  drivers/vfio/platform/Kconfig | 2 +-
>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>
>>>>> diff --git a/drivers/vfio/platform/Kconfig b/drivers/vfio/platform/Kconfig
>>>>> index 1df7477..bb30128 100644
>>>>> --- a/drivers/vfio/platform/Kconfig
>>>>> +++ b/drivers/vfio/platform/Kconfig
>>>>> @@ -1,6 +1,6 @@
>>>>>  config VFIO_PLATFORM
>>>>>         tristate "VFIO support for platform devices"
>>>>> -       depends on VFIO && EVENTFD && ARM
>>>>> +       depends on VFIO && EVENTFD && (ARM || ARM64)
>>>>>         select VFIO_VIRQFD
>>>>>         help
>>>>>           Support for platform devices with VFIO. This is required to make
>>>>> --
>>>>> 1.9.1
>>>>>
>>>
>>
>>
>>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/