Re: [PATCH v2 0/2] dmaengine: ti-dma-crossbar: Support for eDMA

[Peter Ujfalusi <peter.ujfalusi@ti.com>]

On 07/02/2015 06:56 PM, Vinod Koul wrote:
> On Wed, Jul 01, 2015 at 03:41:26PM +0300, Peter Ujfalusi wrote:
>> Hi,
>>
>> On 06/08/2015 04:22 PM, Peter Ujfalusi wrote:
>>> Hi,
>>>
>>> Changes since v01:
>>> - Drop change in compatible for the crossbar driver and do the configuration
>>>   based on the DT structure.
>>>
>>> The ti-dma-crossbar driver in it's current form can work when it is used with
>>> sDMA (omap-dma). On DRA7x class of devices we have both sDMA and eDMA available.
>>> The sDMA driver expects to get the DMA request line with offset 1. The eDMA
>>> stack does not need the offset.
>>> The crosbbar itself is identical for sDMA and eDMA.
>>> At probe time the driver will do a match to figure out which dma engine it is
>>> connected to and based on that information it will configure the offset needed
>>> by the DMA driver.
>>
>> Gentle ping, it has been almost a month ago this series has been sent.
> Sorry I seem to have missed this series. I relooked at this and it looks
> fine. I will apply it once rc1 is out. If it needs rebase please resend

No problem,
the patch still applies cleanly.

Thanks,
Péter