Re: [PATCH 5/9] iio: mma8452: add devicetree documentation

[Martin Kepplinger <martink@posteo.de>]

Am 2015-07-05 um 13:48 schrieb Jonathan Cameron:
> On 04/07/15 14:55, Martin Kepplinger wrote:
>> Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
>> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
> This is trivial enough I'll take it without a device tree ack (after a few days)
> but convention is to CC all device tree patches to the maintainers of devicetree
> bindings as well as the devicetree list.  
> 
> Jonathan

Thanks a lot so far. I'll send a next version based on your review and
will add devicetree people. Maybe you can take the series cleanly in one
go after that. Someone that quickly runs it, other than me, would be
awesome of course ;)

                     martin
>> ---
>>  .../devicetree/bindings/iio/accel/mma8452.txt       | 21 +++++++++++++++++++++
>>  1 file changed, 21 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/accel/mma8452.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> new file mode 100644
>> index 0000000..8d98e05
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
>> @@ -0,0 +1,21 @@
>> +Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer
>> +
>> +Required properties:
>> +
>> +  - compatible: should be "fsl,mma8653", "fsl,mma8652", "fsl,mma8453" or
>> +    "fsl,mma8452" respectively.
>> +  - reg: the I2C address of the chip
>> +
>> +Optional properties:
>> +
>> +  - interrupt-parent: should be the phandle for the interrupt controller
>> +  - interrupts: interrupt mapping for GPIO IRQ
>> +
>> +Example:
>> +
>> +	mma8653fc@1d {
>> +		compatible = "fsl,mma8653";
>> +		reg = <0x1d>;
>> +		interrupt-parent = <&gpio1>;
>> +		interrupts = <5 0>;
>> +	};
>>
>