From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751722AbbGMHyG (ORCPT ); Mon, 13 Jul 2015 03:54:06 -0400 Received: from mailout3.w1.samsung.com ([210.118.77.13]:28734 "EHLO mailout3.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750900AbbGMHyD (ORCPT ); Mon, 13 Jul 2015 03:54:03 -0400 X-AuditID: cbfec7f4-f79c56d0000012ee-92-55a36e98d1a8 Message-id: <55A36E95.8030509@samsung.com> Date: Mon, 13 Jul 2015 16:53:57 +0900 From: Krzysztof Kozlowski User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-version: 1.0 To: Javier Martinez Canillas , Lee Jones Cc: devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, Mark Brown , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH 2/3] mfd: Add DT binding for Maxim MAX77802 IC References: <1436773348-15316-1-git-send-email-javier@osg.samsung.com> <1436773348-15316-3-git-send-email-javier@osg.samsung.com> In-reply-to: <1436773348-15316-3-git-send-email-javier@osg.samsung.com> Content-type: text/plain; charset=windows-1252 Content-transfer-encoding: 7bit X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFnrCLMWRmVeSWpSXmKPExsVy+t/xq7oz8haHGmw+qGUx9eETNov5R86x Wrx5u4bJ4vULQ4v7X48yWmx6fI3V4vKuOWwWM87vY3Lg8Ni0qpPN4861PWwem5fUe2zpv8vu 0bdlFaPH501yAWxRXDYpqTmZZalF+nYJXBlz37xlLHgtUDH343zWBsb3vF2MnBwSAiYSxw6c ZYOwxSQu3FsPZHNxCAksZZQ4uHM3lPOUUWLGonssIFW8AloSd740MoLYLAKqEk+XNoHF2QSM JTYvXwI2SVQgQuLt5ZNMEPWCEj8mQ/SKCERKnL43kwVkKLPAKkaJD8t3gCWEBZwkPm+5xQix rZlR4lfHFLBuTgF3icXrZzB3MXIAdehJ3L+oBRJmFpCX2LzmLfMERoFZSHbMQqiahaRqASPz KkbR1NLkguKk9FxDveLE3OLSvHS95PzcTYyQsP+yg3HxMatDjAIcjEo8vA1bFoUKsSaWFVfm HmKU4GBWEuH9fBYoxJuSWFmVWpQfX1Sak1p8iFGag0VJnHfurvchQgLpiSWp2ampBalFMFkm Dk6pBka5eNmmCe+WR61ZcWDjQjWHrF/961d8TF8j1qR8Sltw9fGveXKiWWnnauuPGkvmTXx8 zNDvpebJpHs/510SLXWI8Mn8EqjNuTBlhYSi87zQtH/Owe6ut44XsLvmvcqqv6qWnCH/uWPJ hBsLHNw0HtztXPnh/8K8DeExuYXXr4aazd6x22PxVXMlluKMREMt5qLiRAAow4lxdwIAAA== Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 13.07.2015 16:42, Javier Martinez Canillas wrote: > The MAX77802 is a chip that contains regulators, 2 32kHz clocks, > a RTC and an I2C interface to program the individual components. > > The are already DT bindings for the regulators and clocks and > these reference to a bindings/mfd/max77802.txt file, that didn't > exist, for the details about the PMIC. > > Signed-off-by: Javier Martinez Canillas > --- > > Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt I wonder what happened with previous email... http://www.spinics.net/lists/kernel/msg1784726.html > > diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt > new file mode 100644 > index 000000000000..875ebebbc5b0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/max77802.txt > @@ -0,0 +1,26 @@ > +Maxim MAX77802 multi-function device > + > +The Maxim MAX77802 is a power management chip (PMIC) that contains 10 high > +efficiency Buck regulators, 32 Low-dropout (LDO) regulators used to power > +up application processors and peripherals, a 2-channel 32kHz clock outputs, > +a Real-Time-Clock (RTC) and a I2C interface to program the individual > +regulators, clocks outputs and the RTC. > + > +Binding for the built-in 32k clock generator block is defined separately > +in the bindings/clk/maxim,max77802.txt file and binding for the regulators > +is defined in the bindings/regulator/max77802.txt file. > + > +Required properties: > +- compatible : Must be "maxim,max77686"; Shouldn't this be 77802? Best regards, Krzysztof > +- reg : Specifies the i2c slave address of PMIC block. > +- interrupts : This i2c device has an IRQ line connected to the main SoC. > +- interrupt-parent : The parent interrupt controller. > + > +Example: > + > + max77802@09 { > + compatible = "maxim,max77802"; > + interrupt-parent = <&intc>; > + interrupts = <26 0>; > + reg = <0x09>; > + }; >