* bad pages when up/down network cable
@ 2015-07-14 8:31 Xishi Qiu
[not found] ` <CAD=hENdLy_K6LFE3Cm2nfxxVOhWRZWiJmKX5-EKdoBtnWP3MJQ@mail.gmail.com>
0 siblings, 1 reply; 5+ messages in thread
From: Xishi Qiu @ 2015-07-14 8:31 UTC (permalink / raw)
To: linux-mm, LKML, guozhibin 00179312, Xishi Qiu, linux.nics,
e1000-devel
1、the host directly link to the storage device，by intel ixgbe NIC;
between them, no switch or router.
2、the nic of the storage device suddenly become unused and then OK
after a little time, this happened frequency.
3、the host printk a lot of message like these:
The kernel is SUSE 3.0.13, use slab, and the following log shows the
page still have PG_slab when free_pages(). Does anyone have seen the
problem?
Jul 9 11:31:36 root kernel: [1042291.977565] BUG: Bad page state in process swapper pfn:00bf2
Jul 9 11:31:36 root kernel: [1042291.977568] page:ffffea0000029cf0 count:0 mapcount:0 mapping: (null) index:0x7f6d4f500
Jul 9 11:31:36 root kernel: [1042291.977571] page flags: 0x40000000000100(slab) // here is the reason
Jul 9 11:31:36 root kernel: [1042291.977574] Pid: 0, comm: swapper Tainted: G B X 3.0.13-0.27-default #1
Jul 9 11:31:36 root kernel: [1042291.977577] Call Trace:
Jul 9 11:31:36 root kernel: [1042291.977583] [<ffffffff810048b5>] dump_trace+0x75/0x300
Jul 9 11:31:36 root kernel: [1042291.977639] [<ffffffff8143ea0f>] dump_stack+0x69/0x6f
Jul 9 11:31:36 root kernel: [1042291.977644] [<ffffffff810f53a1>] bad_page+0xb1/0x120
Jul 9 11:31:37 root kernel: [1042291.977649] [<ffffffff810f5926>] free_pages_prepare+0xe6/0x110
Jul 9 11:31:37 root kernel: [1042291.977654] [<ffffffff810f9259>] free_hot_cold_page+0x49/0x1f0
Jul 9 11:31:37 root kernel: [1042291.977660] [<ffffffff8137a3b4>] skb_release_data+0xb4/0xe0
Jul 9 11:31:37 root kernel: [1042291.977665] [<ffffffff81379e79>] __kfree_skb+0x9/0x90
Jul 9 11:31:37 root kernel: [1042291.977676] [<ffffffffa02784a9>] ixgbe_clean_tx_irq+0xa9/0x480 [ixgbe]
Jul 9 11:31:37 root kernel: [1042291.977693] [<ffffffffa02788cb>] ixgbe_poll+0x4b/0x1a0 [ixgbe]
Jul 9 11:31:37 root kernel: [1042291.977705] [<ffffffff81389c3a>] net_rx_action+0x10a/0x2c0
Jul 9 11:31:37 root kernel: [1042291.977711] [<ffffffff81060a1f>] __do_softirq+0xef/0x220
Jul 9 11:31:37 root kernel: [1042291.977716] [<ffffffff8144a8bc>] call_softirq+0x1c/0x30
Jul 9 11:31:37 root kernel: [1042291.978974] DWARF2 unwinder stuck at call_softirq+0x1c/0x30
Thanks,
Xishi Qiu
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <CAD=hENdLy_K6LFE3Cm2nfxxVOhWRZWiJmKX5-EKdoBtnWP3MJQ@mail.gmail.com>]
* Re: [E1000-devel] bad pages when up/down network cable [not found] ` <CAD=hENdLy_K6LFE3Cm2nfxxVOhWRZWiJmKX5-EKdoBtnWP3MJQ@mail.gmail.com> @ 2015-07-14 9:24 ` Xishi Qiu 2015-07-14 9:36 ` Xishi Qiu 0 siblings, 1 reply; 5+ messages in thread From: Xishi Qiu @ 2015-07-14 9:24 UTC (permalink / raw) To: zhuyj Cc: Linux MM, LKML, guozhibin 00179312, linux.nics, e1000-devel@lists.sourceforge.net On 2015/7/14 17:00, zhuyj wrote: > Do you use the default ixgbe driver? or the ixgbe driver is modified by you? > Yes，no modify. Thanks, Xishi Qiu > On Tue, Jul 14, 2015 at 4:31 PM, Xishi Qiu <qiuxishi@huawei.com <mailto:qiuxishi@huawei.com>> wrote: > > 1、the host directly link to the storage device，by intel ixgbe NIC; > between them, no switch or router. > 2、the nic of the storage device suddenly become unused and then OK > after a little time, this happened frequency. > 3、the host printk a lot of message like these: > > The kernel is SUSE 3.0.13, use slab, and the following log shows the > page still have PG_slab when free_pages(). Does anyone have seen the > problem? > > Jul 9 11:31:36 root kernel: [1042291.977565] BUG: Bad page state in process swapper pfn:00bf2 > Jul 9 11:31:36 root kernel: [1042291.977568] page:ffffea0000029cf0 count:0 mapcount:0 mapping: (null) index:0x7f6d4f500 > Jul 9 11:31:36 root kernel: [1042291.977571] page flags: 0x40000000000100(slab) // here is the reason > Jul 9 11:31:36 root kernel: [1042291.977574] Pid: 0, comm: swapper Tainted: G B X 3.0.13-0.27-default #1 > Jul 9 11:31:36 root kernel: [1042291.977577] Call Trace: > Jul 9 11:31:36 root kernel: [1042291.977583] [<ffffffff810048b5>] dump_trace+0x75/0x300 > Jul 9 11:31:36 root kernel: [1042291.977639] [<ffffffff8143ea0f>] dump_stack+0x69/0x6f > Jul 9 11:31:36 root kernel: [1042291.977644] [<ffffffff810f53a1>] bad_page+0xb1/0x120 > Jul 9 11:31:37 root kernel: [1042291.977649] [<ffffffff810f5926>] free_pages_prepare+0xe6/0x110 > Jul 9 11:31:37 root kernel: [1042291.977654] [<ffffffff810f9259>] free_hot_cold_page+0x49/0x1f0 > Jul 9 11:31:37 root kernel: [1042291.977660] [<ffffffff8137a3b4>] skb_release_data+0xb4/0xe0 > Jul 9 11:31:37 root kernel: [1042291.977665] [<ffffffff81379e79>] __kfree_skb+0x9/0x90 > Jul 9 11:31:37 root kernel: [1042291.977676] [<ffffffffa02784a9>] ixgbe_clean_tx_irq+0xa9/0x480 [ixgbe] > Jul 9 11:31:37 root kernel: [1042291.977693] [<ffffffffa02788cb>] ixgbe_poll+0x4b/0x1a0 [ixgbe] > Jul 9 11:31:37 root kernel: [1042291.977705] [<ffffffff81389c3a>] net_rx_action+0x10a/0x2c0 > Jul 9 11:31:37 root kernel: [1042291.977711] [<ffffffff81060a1f>] __do_softirq+0xef/0x220 > Jul 9 11:31:37 root kernel: [1042291.977716] [<ffffffff8144a8bc>] call_softirq+0x1c/0x30 > Jul 9 11:31:37 root kernel: [1042291.978974] DWARF2 unwinder stuck at call_softirq+0x1c/0x30 > > Thanks, > Xishi Qiu > > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > E1000-devel mailing list > E1000-devel@lists.sourceforge.net <mailto:E1000-devel@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/e1000-devel > To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [E1000-devel] bad pages when up/down network cable 2015-07-14 9:24 ` [E1000-devel] " Xishi Qiu @ 2015-07-14 9:36 ` Xishi Qiu 2015-07-14 14:40 ` [linux-nics] " Skidmore, Donald C 0 siblings, 1 reply; 5+ messages in thread From: Xishi Qiu @ 2015-07-14 9:36 UTC (permalink / raw) To: zhuyj Cc: Linux MM, LKML, guozhibin 00179312, linux.nics, e1000-devel@lists.sourceforge.net On 2015/7/14 17:24, Xishi Qiu wrote: > On 2015/7/14 17:00, zhuyj wrote: > >> Do you use the default ixgbe driver? or the ixgbe driver is modified by you? >> > > Yes，no modify. > Sorry, it is modified by us... the driver come from intel，the info： root:~ # ethtool -i p2p2 driver: ixgbe version: 3.9.16-NAPI firmware-version: 0x18f10001 bus-info: 0000:04:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes Thanks, Xishi Qiu > >> On Tue, Jul 14, 2015 at 4:31 PM, Xishi Qiu <qiuxishi@huawei.com <mailto:qiuxishi@huawei.com>> wrote: >> >> 1、the host directly link to the storage device，by intel ixgbe NIC; >> between them, no switch or router. >> 2、the nic of the storage device suddenly become unused and then OK >> after a little time, this happened frequency. >> 3、the host printk a lot of message like these: >> >> The kernel is SUSE 3.0.13, use slab, and the following log shows the >> page still have PG_slab when free_pages(). Does anyone have seen the >> problem? >> >> Jul 9 11:31:36 root kernel: [1042291.977565] BUG: Bad page state in process swapper pfn:00bf2 >> Jul 9 11:31:36 root kernel: [1042291.977568] page:ffffea0000029cf0 count:0 mapcount:0 mapping: (null) index:0x7f6d4f500 >> Jul 9 11:31:36 root kernel: [1042291.977571] page flags: 0x40000000000100(slab) // here is the reason >> Jul 9 11:31:36 root kernel: [1042291.977574] Pid: 0, comm: swapper Tainted: G B X 3.0.13-0.27-default #1 >> Jul 9 11:31:36 root kernel: [1042291.977577] Call Trace: >> Jul 9 11:31:36 root kernel: [1042291.977583] [<ffffffff810048b5>] dump_trace+0x75/0x300 >> Jul 9 11:31:36 root kernel: [1042291.977639] [<ffffffff8143ea0f>] dump_stack+0x69/0x6f >> Jul 9 11:31:36 root kernel: [1042291.977644] [<ffffffff810f53a1>] bad_page+0xb1/0x120 >> Jul 9 11:31:37 root kernel: [1042291.977649] [<ffffffff810f5926>] free_pages_prepare+0xe6/0x110 >> Jul 9 11:31:37 root kernel: [1042291.977654] [<ffffffff810f9259>] free_hot_cold_page+0x49/0x1f0 >> Jul 9 11:31:37 root kernel: [1042291.977660] [<ffffffff8137a3b4>] skb_release_data+0xb4/0xe0 >> Jul 9 11:31:37 root kernel: [1042291.977665] [<ffffffff81379e79>] __kfree_skb+0x9/0x90 >> Jul 9 11:31:37 root kernel: [1042291.977676] [<ffffffffa02784a9>] ixgbe_clean_tx_irq+0xa9/0x480 [ixgbe] >> Jul 9 11:31:37 root kernel: [1042291.977693] [<ffffffffa02788cb>] ixgbe_poll+0x4b/0x1a0 [ixgbe] >> Jul 9 11:31:37 root kernel: [1042291.977705] [<ffffffff81389c3a>] net_rx_action+0x10a/0x2c0 >> Jul 9 11:31:37 root kernel: [1042291.977711] [<ffffffff81060a1f>] __do_softirq+0xef/0x220 >> Jul 9 11:31:37 root kernel: [1042291.977716] [<ffffffff8144a8bc>] call_softirq+0x1c/0x30 >> Jul 9 11:31:37 root kernel: [1042291.978974] DWARF2 unwinder stuck at call_softirq+0x1c/0x30 >> >> Thanks, >> Xishi Qiu >> >> >> ------------------------------------------------------------------------------ >> Don't Limit Your Business. Reach for the Cloud. >> GigeNET's Cloud Solutions provide you with the tools and support that >> you need to offload your IT needs and focus on growing your business. >> Configured For All Businesses. Start Your Cloud Today. >> https://www.gigenetcloud.com/ >> _______________________________________________ >> E1000-devel mailing list >> E1000-devel@lists.sourceforge.net <mailto:E1000-devel@lists.sourceforge.net> >> https://lists.sourceforge.net/lists/listinfo/e1000-devel >> To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired >> >> > > ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [linux-nics] [E1000-devel] bad pages when up/down network cable 2015-07-14 9:36 ` Xishi Qiu @ 2015-07-14 14:40 ` Skidmore, Donald C 2015-07-15 1:30 ` Xishi Qiu 0 siblings, 1 reply; 5+ messages in thread From: Skidmore, Donald C @ 2015-07-14 14:40 UTC (permalink / raw) To: Xishi Qiu, zhuyj Cc: guozhibin 00179312, Linux MM, Linux NICS, LKML, e1000-devel@lists.sourceforge.net [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain; charset="utf-8", Size: 4870 bytes --] Hey Xishi, You are using a really old driver, our current is 4.1.1 and 3.9 dates to over 3 years ago. We have makes changes to support surprise removal that very well may address this issue. Have you attempted to recreate this failure with the latest out of tree driver? Thanks, -Don <donald.c.skidmore@intel.com> > -----Original Message----- > From: linux-nics-bounces@isotope.jf.intel.com [mailto:linux-nics- > bounces@isotope.jf.intel.com] On Behalf Of Xishi Qiu > Sent: Tuesday, July 14, 2015 2:37 AM > To: zhuyj > Cc: guozhibin 00179312; Linux MM; Linux NICS; LKML; e1000- > devel@lists.sourceforge.net > Subject: Re: [linux-nics] [E1000-devel] bad pages when up/down network > cable > > On 2015/7/14 17:24, Xishi Qiu wrote: > > > On 2015/7/14 17:00, zhuyj wrote: > > > >> Do you use the default ixgbe driver? or the ixgbe driver is modified by > you? > >> > > > > Yes，no modify. > > > > Sorry, it is modified by us... > > the driver come from intel，the info： > root:~ # ethtool -i p2p2 > driver: ixgbe > version: 3.9.16-NAPI > firmware-version: 0x18f10001 > bus-info: 0000:04:00.1 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: yes > supports-register-dump: yes > > Thanks, > Xishi Qiu > > > > >> On Tue, Jul 14, 2015 at 4:31 PM, Xishi Qiu <qiuxishi@huawei.com > <mailto:qiuxishi@huawei.com>> wrote: > >> > >> 1ã€the host directly link to the storage device，by intel ixgbe NIC; > >> between them, no switch or router. > >> 2ã€the nic of the storage device suddenly become unused and then OK > >> after a little time, this happened frequency. > >> 3ã€the host printk a lot of message like these: > >> > >> The kernel is SUSE 3.0.13, use slab, and the following log shows the > >> page still have PG_slab when free_pages(). Does anyone have seen the > >> problem? > >> > >> Jul 9 11:31:36 root kernel: [1042291.977565] BUG: Bad page state in > process swapper pfn:00bf2 > >> Jul 9 11:31:36 root kernel: [1042291.977568] page:ffffea0000029cf0 > count:0 mapcount:0 mapping: (null) index:0x7f6d4f500 > >> Jul 9 11:31:36 root kernel: [1042291.977571] page flags: > 0x40000000000100(slab) // here is the reason > >> Jul 9 11:31:36 root kernel: [1042291.977574] Pid: 0, comm: swapper > Tainted: G B X 3.0.13-0.27-default #1 > >> Jul 9 11:31:36 root kernel: [1042291.977577] Call Trace: > >> Jul 9 11:31:36 root kernel: [1042291.977583] [<ffffffff810048b5>] > dump_trace+0x75/0x300 > >> Jul 9 11:31:36 root kernel: [1042291.977639] [<ffffffff8143ea0f>] > dump_stack+0x69/0x6f > >> Jul 9 11:31:36 root kernel: [1042291.977644] [<ffffffff810f53a1>] > bad_page+0xb1/0x120 > >> Jul 9 11:31:37 root kernel: [1042291.977649] [<ffffffff810f5926>] > free_pages_prepare+0xe6/0x110 > >> Jul 9 11:31:37 root kernel: [1042291.977654] [<ffffffff810f9259>] > free_hot_cold_page+0x49/0x1f0 > >> Jul 9 11:31:37 root kernel: [1042291.977660] [<ffffffff8137a3b4>] > skb_release_data+0xb4/0xe0 > >> Jul 9 11:31:37 root kernel: [1042291.977665] [<ffffffff81379e79>] > __kfree_skb+0x9/0x90 > >> Jul 9 11:31:37 root kernel: [1042291.977676] [<ffffffffa02784a9>] > ixgbe_clean_tx_irq+0xa9/0x480 [ixgbe] > >> Jul 9 11:31:37 root kernel: [1042291.977693] [<ffffffffa02788cb>] > ixgbe_poll+0x4b/0x1a0 [ixgbe] > >> Jul 9 11:31:37 root kernel: [1042291.977705] [<ffffffff81389c3a>] > net_rx_action+0x10a/0x2c0 > >> Jul 9 11:31:37 root kernel: [1042291.977711] [<ffffffff81060a1f>] > __do_softirq+0xef/0x220 > >> Jul 9 11:31:37 root kernel: [1042291.977716] [<ffffffff8144a8bc>] > call_softirq+0x1c/0x30 > >> Jul 9 11:31:37 root kernel: [1042291.978974] DWARF2 unwinder stuck at > call_softirq+0x1c/0x30 > >> > >> Thanks, > >> Xishi Qiu > >> > >> > >> ------------------------------------------------------------------------------ > >> Don't Limit Your Business. Reach for the Cloud. > >> GigeNET's Cloud Solutions provide you with the tools and support that > >> you need to offload your IT needs and focus on growing your business. > >> Configured For All Businesses. Start Your Cloud Today. > >> https://www.gigenetcloud.com/ > >> _______________________________________________ > >> E1000-devel mailing list > >> E1000-devel@lists.sourceforge.net <mailto:E1000- > devel@lists.sourceforge.net> > >> https://lists.sourceforge.net/lists/listinfo/e1000-devel > >> To learn more about Intel® Ethernet, visit > http://communities.intel.com/community/wired > >> > >> > > > > > > > > _______________________________________________ > Linux-nics mailing list > Linux-nics@intel.com ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-nics] [E1000-devel] bad pages when up/down network cable 2015-07-14 14:40 ` [linux-nics] " Skidmore, Donald C @ 2015-07-15 1:30 ` Xishi Qiu 0 siblings, 0 replies; 5+ messages in thread From: Xishi Qiu @ 2015-07-15 1:30 UTC (permalink / raw) To: Skidmore, Donald C Cc: zhuyj, guozhibin 00179312, Linux MM, Linux NICS, LKML, e1000-devel@lists.sourceforge.net On 2015/7/14 22:40, Skidmore, Donald C wrote: > Hey Xishi, > > You are using a really old driver, our current is 4.1.1 and 3.9 dates to over 3 years ago. We have makes changes to support surprise removal that very well may address this issue. Have you attempted to recreate this failure with the latest out of tree driver? > > Thanks, > -Don <donald.c.skidmore@intel.com> > Thank you very much, we'll try the latest driver. Thanks, Xishi Qiu > > >> -----Original Message----- >> From: linux-nics-bounces@isotope.jf.intel.com [mailto:linux-nics- >> bounces@isotope.jf.intel.com] On Behalf Of Xishi Qiu >> Sent: Tuesday, July 14, 2015 2:37 AM >> To: zhuyj >> Cc: guozhibin 00179312; Linux MM; Linux NICS; LKML; e1000- >> devel@lists.sourceforge.net >> Subject: Re: [linux-nics] [E1000-devel] bad pages when up/down network >> cable >> >> On 2015/7/14 17:24, Xishi Qiu wrote: >> >>> On 2015/7/14 17:00, zhuyj wrote: >>> >>>> Do you use the default ixgbe driver? or the ixgbe driver is modified by >> you? >>>> >>> >>> Yes，no modify. >>> >> >> Sorry, it is modified by us... >> >> the driver come from intel，the info： >> root:~ # ethtool -i p2p2 >> driver: ixgbe >> version: 3.9.16-NAPI >> firmware-version: 0x18f10001 >> bus-info: 0000:04:00.1 >> supports-statistics: yes >> supports-test: yes >> supports-eeprom-access: yes >> supports-register-dump: yes >> >> Thanks, >> Xishi Qiu >> >>> >>>> On Tue, Jul 14, 2015 at 4:31 PM, Xishi Qiu <qiuxishi@huawei.com >> <mailto:qiuxishi@huawei.com>> wrote: >>>> >>>> 1、the host directly link to the storage device，by intel ixgbe NIC; >>>> between them, no switch or router. >>>> 2、the nic of the storage device suddenly become unused and then OK >>>> after a little time, this happened frequency. >>>> 3、the host printk a lot of message like these: >>>> >>>> The kernel is SUSE 3.0.13, use slab, and the following log shows the >>>> page still have PG_slab when free_pages(). Does anyone have seen the >>>> problem? >>>> >>>> Jul 9 11:31:36 root kernel: [1042291.977565] BUG: Bad page state in >> process swapper pfn:00bf2 >>>> Jul 9 11:31:36 root kernel: [1042291.977568] page:ffffea0000029cf0 >> count:0 mapcount:0 mapping: (null) index:0x7f6d4f500 >>>> Jul 9 11:31:36 root kernel: [1042291.977571] page flags: >> 0x40000000000100(slab) // here is the reason >>>> Jul 9 11:31:36 root kernel: [1042291.977574] Pid: 0, comm: swapper >> Tainted: G B X 3.0.13-0.27-default #1 >>>> Jul 9 11:31:36 root kernel: [1042291.977577] Call Trace: >>>> Jul 9 11:31:36 root kernel: [1042291.977583] [<ffffffff810048b5>] >> dump_trace+0x75/0x300 >>>> Jul 9 11:31:36 root kernel: [1042291.977639] [<ffffffff8143ea0f>] >> dump_stack+0x69/0x6f >>>> Jul 9 11:31:36 root kernel: [1042291.977644] [<ffffffff810f53a1>] >> bad_page+0xb1/0x120 >>>> Jul 9 11:31:37 root kernel: [1042291.977649] [<ffffffff810f5926>] >> free_pages_prepare+0xe6/0x110 >>>> Jul 9 11:31:37 root kernel: [1042291.977654] [<ffffffff810f9259>] >> free_hot_cold_page+0x49/0x1f0 >>>> Jul 9 11:31:37 root kernel: [1042291.977660] [<ffffffff8137a3b4>] >> skb_release_data+0xb4/0xe0 >>>> Jul 9 11:31:37 root kernel: [1042291.977665] [<ffffffff81379e79>] >> __kfree_skb+0x9/0x90 >>>> Jul 9 11:31:37 root kernel: [1042291.977676] [<ffffffffa02784a9>] >> ixgbe_clean_tx_irq+0xa9/0x480 [ixgbe] >>>> Jul 9 11:31:37 root kernel: [1042291.977693] [<ffffffffa02788cb>] >> ixgbe_poll+0x4b/0x1a0 [ixgbe] >>>> Jul 9 11:31:37 root kernel: [1042291.977705] [<ffffffff81389c3a>] >> net_rx_action+0x10a/0x2c0 >>>> Jul 9 11:31:37 root kernel: [1042291.977711] [<ffffffff81060a1f>] >> __do_softirq+0xef/0x220 >>>> Jul 9 11:31:37 root kernel: [1042291.977716] [<ffffffff8144a8bc>] >> call_softirq+0x1c/0x30 >>>> Jul 9 11:31:37 root kernel: [1042291.978974] DWARF2 unwinder stuck at >> call_softirq+0x1c/0x30 >>>> >>>> Thanks, >>>> Xishi Qiu >>>> >>>> >>>> ------------------------------------------------------------------------------ >>>> Don't Limit Your Business. Reach for the Cloud. >>>> GigeNET's Cloud Solutions provide you with the tools and support that >>>> you need to offload your IT needs and focus on growing your business. >>>> Configured For All Businesses. Start Your Cloud Today. >>>> https://www.gigenetcloud.com/ >>>> _______________________________________________ >>>> E1000-devel mailing list >>>> E1000-devel@lists.sourceforge.net <mailto:E1000- >> devel@lists.sourceforge.net> >>>> https://lists.sourceforge.net/lists/listinfo/e1000-devel >>>> To learn more about Intel® Ethernet, visit >> http://communities.intel.com/community/wired >>>> >>>> >>> >>> >> >> >> >> _______________________________________________ >> Linux-nics mailing list >> Linux-nics@intel.com ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-07-15 1:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-07-14 8:31 bad pages when up/down network cable Xishi Qiu
[not found] ` <CAD=hENdLy_K6LFE3Cm2nfxxVOhWRZWiJmKX5-EKdoBtnWP3MJQ@mail.gmail.com>
2015-07-14 9:24 ` [E1000-devel] " Xishi Qiu
2015-07-14 9:36 ` Xishi Qiu
2015-07-14 14:40 ` [linux-nics] " Skidmore, Donald C
2015-07-15 1:30 ` Xishi Qiu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox