RE: [GIT PULL] ARM: EXYNOS: dts: Improvements for 4.3

Kukjin Kim
2015-07-21T04:56:10Z

Krzysztof Kozlowski wrote:
>
> Dear Kukjin,
>
Hi Krzysztof,

> DTS related improvements. Description along with a tag.
> You can find them also on the lists with my reviewed-by.
>
> Best regards,
> Krzysztof
>
>
> The following changes since commit a419d78a6f97f8c977fe55d5d590cd0654ecd1ee:
>
> ARM: dts: Exynos4210: add CPU OPP and regulator supply property (2015-07-13 21:16:05 +0900)
>
> are available in the git repository at:
>
> https://github.com/krzk/linux.git tags/samsung-dt-4.3
>
> for you to fetch changes up to cd0b551be420d49c2bde8dcf5ea147278dc89ffb:
>
> ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths (2015-07-16 11:22:11 +0900)
>
> ----------------------------------------------------------------
> Device Tree improvements for Exynos based boards:
> 1. Enable proper USB 3.0 regulators on Odroid XU3 board.
> 2. Set over-heat and over-voltage thresholds for Trats2 board fuel
> gauge.
> 3. Fix missing display frequency on Exynos3250 Rinato board
> (necessary to fix the display).
> 4. Enable thermal management and fan control on Odroid XU3 board.
> The speed of fan is adjusted to current temperature of SoC.
> 5. Cleanups and usage of label-notation for overriding nodes.
>
> ----------------------------------------------------------------
> Anand Moon (5):
> ARM: dts: odroidxu3: Enable USB3 regulators
> ARM: dts: exynos5422-odroidxu3: Add pwm-fan node
> ARM: dts: exynos5422-odroidxu3: Enable TMU at Exynos5422 base
> ARM: dts: exynos5422-odroidxu3: Define default thermal-zones
> ARM: dts: exynos5422-odroidxu3: Enable thermal-zones
>
> Andreas Färber (1):
> ARM: dts: Clean up exynos5410-smdk5410 indentation
>
> Hyungwon Hwang (1):
> ARM: dts: fix the clock-frequency of exynos3250-rinato board's panel
>
> Javier Martinez Canillas (4):
> ARM: dts: Include exynos5250-pinctrl after the nodes were defined
> ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths
> ARM: dts: Include exynos5420-pinctrl after the nodes were defined
> ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths
>
> Krzysztof Kozlowski (2):
> ARM: dts: Set max17047 over heat and over voltage thresholds
> ARM: dts: Use labels for overriding nodes in exynos4210-universal
>
> arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
> arch/arm/boot/dts/exynos4210-universal_c210.dts | 620 ++++----
> arch/arm/boot/dts/exynos4412-trats2.dts | 3 +
> arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 1600 ++++++++++----------
> arch/arm/boot/dts/exynos5250.dtsi | 3 +-
> arch/arm/boot/dts/exynos5410-smdk5410.dts | 6 +-
> arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 1411 +++++++++--------
> arch/arm/boot/dts/exynos5420.dtsi | 3 +-
> arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi | 59 +
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 46 +
> 10 files changed, 1930 insertions(+), 1823 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
> --

Applied all of changes into fixes/non-critical and next/dt-samsung.

Note will be sent out to arm-soc in a couple of days.

Thanks,
Kukjin