[RFC 0/3] Adding support for Zynq PL reset controller.

[RFC 0/3] Adding support for Zynq PL reset controller.

[Moritz Fischer]

Hi all,

while trying to get the devicetree overlays working using Alan's
simple-fpga-bus I couldn't find a way to independently reset
parts of the PL logic. I might have missed something and this
exists already somewhere, in that case, oh well ...

If Sören or Michael could take a look at this to let me know
if this is fundamentally wrong, that would be great.

Thanks,

Moritz

Moritz Fischer (3):
  docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.
  dts: zynq: Add devicetree entry for PL reset controller.
  reset: reset-zynq-pl: Adding support for Xilinx Zynq PL reset.

 .../devicetree/bindings/reset/zynq-reset-pl.txt    |  13 ++
 arch/arm/boot/dts/zynq-7000.dtsi                   |   6 +
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-zynq-pl.c                      | 142 +++++++++++++++++++++
 4 files changed, 162 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
 create mode 100644 drivers/reset/reset-zynq-pl.c

-- 
2.4.3

[RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

[Moritz Fischer]

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
---
 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt

diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
new file mode 100644
index 0000000..ac4499e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
@@ -0,0 +1,13 @@
+Xilinx Zynq PL Reset Manager
+
+Required properties:
+- compatible: "xlnx,zynq-reset-pl"
+- syscon <&slcr>;
+- #reset-cells: 1
+
+Example:
+	rstc: rstc@240 {
+		#reset-cells = <1>;
+		compatible = "xlnx,zynq-reset-pl";
+		syscon = <&slcr>;
+	};
-- 
2.4.3

Re: [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

[Michal Simek]

On 07/24/2015 12:51 AM, Moritz Fischer wrote:
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
>  Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> new file mode 100644
> index 0000000..ac4499e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> @@ -0,0 +1,13 @@
> +Xilinx Zynq PL Reset Manager

I think there is no reason to be just PL specific.
> +
> +Required properties:
> +- compatible: "xlnx,zynq-reset-pl"
> +- syscon <&slcr>;
> +- #reset-cells: 1
> +
> +Example:
> +	rstc: rstc@240 {

@200 then here

> +		#reset-cells = <1>;
> +		compatible = "xlnx,zynq-reset-pl";

Compatible should be first below node name.

You should add also reg property 0x200 0x50

> +		syscon = <&slcr>;
> +	};
> 

Thanks,
Michal

Re: [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

[Sören Brinkmann]

On Fri, 2015-07-24 at 06:40AM +0200, Michal Simek wrote:
> On 07/24/2015 12:51 AM, Moritz Fischer wrote:
> > Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> > ---
> >  Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> > new file mode 100644
> > index 0000000..ac4499e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> > @@ -0,0 +1,13 @@
> > +Xilinx Zynq PL Reset Manager
> 
> I think there is no reason to be just PL specific.

That was my first thought too. Why not model all the resets in the SLCR?

	Sören

Re: [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

[Moritz Fischer]

Michal, Sören,

On Fri, Jul 24, 2015 at 7:50 AM, Sören Brinkmann
<soren.brinkmann@xilinx.com> wrote:
> On Fri, 2015-07-24 at 06:40AM +0200, Michal Simek wrote:
>> On 07/24/2015 12:51 AM, Moritz Fischer wrote:
>> > Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
>> > ---
>> >  Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
>> >  1 file changed, 13 insertions(+)
>> >  create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> > new file mode 100644
>> > index 0000000..ac4499e
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> > @@ -0,0 +1,13 @@
>> > +Xilinx Zynq PL Reset Manager
>>
>> I think there is no reason to be just PL specific.
>
> That was my first thought too. Why not model all the resets in the SLCR?


I only needed the ones for the PL for my fpga-mgr work and reading the
TRM had a hard time to decide which ones make sense,
and which ones don't make sense to expose to Linux. I'll look into
reworking it to support all the resets.

>         Sören

Moritz

Re: [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

[Philipp Zabel]

Am Donnerstag, den 23.07.2015, 15:51 -0700 schrieb Moritz Fischer:
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
>  Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> new file mode 100644
> index 0000000..ac4499e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
> @@ -0,0 +1,13 @@
> +Xilinx Zynq PL Reset Manager
> +
> +Required properties:
> +- compatible: "xlnx,zynq-reset-pl"
> +- syscon <&slcr>;
> +- #reset-cells: 1
> +
> +Example:
> +	rstc: rstc@240 {
> +		#reset-cells = <1>;
> +		compatible = "xlnx,zynq-reset-pl";
> +		syscon = <&slcr>;
> +	};

Instead of the syscon property, why not specify that the rstc node must
be a child of the slcr node?

regards
Philipp

Re: [RFC 1/3] docs: dts: Added documentation for Xilinx Zynq PL Reset bindings.

[Michal Simek]

On 07/24/2015 09:25 AM, Philipp Zabel wrote:
> Am Donnerstag, den 23.07.2015, 15:51 -0700 schrieb Moritz Fischer:
>> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
>> ---
>>  Documentation/devicetree/bindings/reset/zynq-reset-pl.txt | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>>
>> diff --git a/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> new file mode 100644
>> index 0000000..ac4499e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/reset/zynq-reset-pl.txt
>> @@ -0,0 +1,13 @@
>> +Xilinx Zynq PL Reset Manager
>> +
>> +Required properties:
>> +- compatible: "xlnx,zynq-reset-pl"
>> +- syscon <&slcr>;
>> +- #reset-cells: 1
>> +
>> +Example:
>> +	rstc: rstc@240 {
>> +		#reset-cells = <1>;
>> +		compatible = "xlnx,zynq-reset-pl";
>> +		syscon = <&slcr>;
>> +	};
> 
> Instead of the syscon property, why not specify that the rstc node must
> be a child of the slcr node?

FYI: It is already a child node of SLCR if you look at location in DTS.

Thanks,
Michal

[RFC 2/3] dts: zynq: Add devicetree entry for PL reset controller.

[Moritz Fischer]

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
---
 arch/arm/boot/dts/zynq-7000.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index b429e1d..a56fe11 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -258,6 +258,12 @@
 				reg = <0x100 0x100>;
 			};
 
+			rstc: rstc@240 {
+				#reset-cells = <1>;
+				compatible = "xlnx,zynq-reset-pl";
+				syscon = <&slcr>;
+			};
+
 			pinctrl0: pinctrl@700 {
 				compatible = "xlnx,pinctrl-zynq";
 				reg = <0x700 0x200>;
-- 
2.4.3

[RFC 3/3] reset: reset-zynq-pl: Adding support for Xilinx Zynq PL reset.

[Moritz Fischer]

The Zynq PL reset controller allows to control the 4
FCLK{0..3}_RESETN signals that can be used to reset custom IP in
the PL.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
---
 drivers/reset/Makefile        |   1 +
 drivers/reset/reset-zynq-pl.c | 142 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 143 insertions(+)
 create mode 100644 drivers/reset/reset-zynq-pl.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 157d421..5c86f92 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq-pl.o
diff --git a/drivers/reset/reset-zynq-pl.c b/drivers/reset/reset-zynq-pl.c
new file mode 100644
index 0000000..3e04ab0
--- /dev/null
+++ b/drivers/reset/reset-zynq-pl.c
@@ -0,0 +1,142 @@
+/*
+ * Xilinx Zynq PL Reset Controller
+ *
+ * Copyright (c) 2015, National Instruments Corp.
+ * Author: Moritz Fischer <moritz.fischer@ettus.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+/* Offsets into SLCR regmap */
+#define SLCR_FPGA_RST_CTRL_OFFSET	0x240 /* FPGA Software Reset Control */
+
+struct zynq_pl_reset_data {
+	struct regmap *slcr;
+	struct reset_controller_dev rcdev;
+};
+
+static int zynq_pl_reset_assert(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct zynq_pl_reset_data *priv = container_of(rcdev,
+						struct zynq_pl_reset_data,
+						rcdev);
+
+	int offset = id % BITS_PER_LONG;
+
+	regmap_update_bits(priv->slcr,
+			   SLCR_FPGA_RST_CTRL_OFFSET,
+			   BIT(offset),
+			   BIT(offset));
+
+	return 0;
+}
+
+static int zynq_pl_reset_deassert(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	struct zynq_pl_reset_data *priv = container_of(rcdev,
+						struct zynq_pl_reset_data,
+						rcdev);
+
+	int offset = id % BITS_PER_LONG;
+
+	regmap_update_bits(priv->slcr,
+			   SLCR_FPGA_RST_CTRL_OFFSET,
+			   BIT(offset),
+			   ~BIT(offset));
+
+	return 0;
+}
+
+static int zynq_pl_reset_status(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	struct zynq_pl_reset_data *priv = container_of(rcdev,
+						struct zynq_pl_reset_data,
+						rcdev);
+	int offset = id % BITS_PER_LONG;
+	u32 reg;
+
+	regmap_read(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET, &reg);
+
+	return !(reg & BIT(offset));
+}
+
+static const struct reset_control_ops zynq_pl_reset_ops = {
+	.assert		= zynq_pl_reset_assert,
+	.deassert	= zynq_pl_reset_deassert,
+	.status		= zynq_pl_reset_status,
+};
+
+static int zynq_pl_reset_probe(struct platform_device *pdev)
+{
+	struct zynq_pl_reset_data *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+		"syscon");
+	if (IS_ERR(priv->slcr)) {
+		dev_err(&pdev->dev, "unable to get zynq-slcr regmap");
+		return PTR_ERR(priv->slcr);
+	}
+
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.nr_resets = BITS_PER_LONG;
+	priv->rcdev.ops = &zynq_pl_reset_ops;
+	priv->rcdev.of_node = pdev->dev.of_node;
+	reset_controller_register(&priv->rcdev);
+
+	return 0;
+}
+
+static int zynq_pl_reset_remove(struct platform_device *pdev)
+{
+	struct zynq_pl_reset_data *priv = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&priv->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id zynq_pl_reset_dt_ids[] = {
+	{ .compatible = "xlnx,zynq-reset-pl", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver zynq_pl_reset_driver = {
+	.probe	= zynq_pl_reset_probe,
+	.remove	= zynq_pl_reset_remove,
+	.driver = {
+		.name		= "zynq-pl-reset",
+		.of_match_table	= zynq_pl_reset_dt_ids,
+	},
+};
+module_platform_driver(zynq_pl_reset_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
+MODULE_DESCRIPTION("Zynq PL Reset Controller Driver");
+MODULE_ALIAS("reset:zynq-pl");
-- 
2.4.3

Re: [RFC 3/3] reset: reset-zynq-pl: Adding support for Xilinx Zynq PL reset.

[Sören Brinkmann]

Hi Moritz,

On Thu, 2015-07-23 at 03:51PM -0700, Moritz Fischer wrote:
> The Zynq PL reset controller allows to control the 4
> FCLK{0..3}_RESETN signals that can be used to reset custom IP in
> the PL.
> 
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
>  drivers/reset/Makefile        |   1 +
>  drivers/reset/reset-zynq-pl.c | 142 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 143 insertions(+)
>  create mode 100644 drivers/reset/reset-zynq-pl.c
> 
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 157d421..5c86f92 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
>  obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
>  obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
>  obj-$(CONFIG_ARCH_STI) += sti/
> +obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq-pl.o
> diff --git a/drivers/reset/reset-zynq-pl.c b/drivers/reset/reset-zynq-pl.c
> new file mode 100644
> index 0000000..3e04ab0
> --- /dev/null
> +++ b/drivers/reset/reset-zynq-pl.c
> @@ -0,0 +1,142 @@
> +/*
> + * Xilinx Zynq PL Reset Controller
> + *
> + * Copyright (c) 2015, National Instruments Corp.
> + * Author: Moritz Fischer <moritz.fischer@ettus.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.

Here you allow GPLv2 and later, whereas in the LICENSE macro you only
allow GPLv2. That should be in sync.

> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +/* Offsets into SLCR regmap */
> +#define SLCR_FPGA_RST_CTRL_OFFSET	0x240 /* FPGA Software Reset Control */
> +
> +struct zynq_pl_reset_data {
> +	struct regmap *slcr;
> +	struct reset_controller_dev rcdev;
> +};
> +
> +static int zynq_pl_reset_assert(struct reset_controller_dev *rcdev,
> +				unsigned long id)
> +{
> +	struct zynq_pl_reset_data *priv = container_of(rcdev,
> +						struct zynq_pl_reset_data,
> +						rcdev);
> +
> +	int offset = id % BITS_PER_LONG;
> +
> +	regmap_update_bits(priv->slcr,
> +			   SLCR_FPGA_RST_CTRL_OFFSET,
> +			   BIT(offset),
> +			   BIT(offset));
> +
> +	return 0;
> +}
> +
> +static int zynq_pl_reset_deassert(struct reset_controller_dev *rcdev,
> +				  unsigned long id)
> +{
> +	struct zynq_pl_reset_data *priv = container_of(rcdev,
> +						struct zynq_pl_reset_data,
> +						rcdev);
> +
> +	int offset = id % BITS_PER_LONG;
> +
> +	regmap_update_bits(priv->slcr,
> +			   SLCR_FPGA_RST_CTRL_OFFSET,
> +			   BIT(offset),
> +			   ~BIT(offset));
> +
> +	return 0;
> +}
> +
> +static int zynq_pl_reset_status(struct reset_controller_dev *rcdev,
> +				unsigned long id)
> +{
> +	struct zynq_pl_reset_data *priv = container_of(rcdev,
> +						struct zynq_pl_reset_data,
> +						rcdev);
> +	int offset = id % BITS_PER_LONG;
> +	u32 reg;
> +
> +	regmap_read(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET, &reg);
> +
> +	return !(reg & BIT(offset));
> +}
> +
> +static const struct reset_control_ops zynq_pl_reset_ops = {
> +	.assert		= zynq_pl_reset_assert,
> +	.deassert	= zynq_pl_reset_deassert,
> +	.status		= zynq_pl_reset_status,
> +};
> +
> +static int zynq_pl_reset_probe(struct platform_device *pdev)
> +{
> +	struct zynq_pl_reset_data *priv;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, priv);
> +
> +	priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
> +		"syscon");
> +	if (IS_ERR(priv->slcr)) {
> +		dev_err(&pdev->dev, "unable to get zynq-slcr regmap");
> +		return PTR_ERR(priv->slcr);
> +	}
> +
> +	priv->rcdev.owner = THIS_MODULE;
> +	priv->rcdev.nr_resets = BITS_PER_LONG;
> +	priv->rcdev.ops = &zynq_pl_reset_ops;
> +	priv->rcdev.of_node = pdev->dev.of_node;
> +	reset_controller_register(&priv->rcdev);
> +
> +	return 0;
> +}
> +
> +static int zynq_pl_reset_remove(struct platform_device *pdev)
> +{
> +	struct zynq_pl_reset_data *priv = platform_get_drvdata(pdev);
> +
> +	reset_controller_unregister(&priv->rcdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id zynq_pl_reset_dt_ids[] = {
> +	{ .compatible = "xlnx,zynq-reset-pl", },
> +	{ /* sentinel */ },
> +};
> +
> +static struct platform_driver zynq_pl_reset_driver = {
> +	.probe	= zynq_pl_reset_probe,
> +	.remove	= zynq_pl_reset_remove,
> +	.driver = {
> +		.name		= "zynq-pl-reset",
> +		.of_match_table	= zynq_pl_reset_dt_ids,
> +	},
> +};
> +module_platform_driver(zynq_pl_reset_driver);
> +
> +MODULE_LICENSE("GPL v2");

GPLv2 or GPL?

> +MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
> +MODULE_DESCRIPTION("Zynq PL Reset Controller Driver");
> +MODULE_ALIAS("reset:zynq-pl");

There has been some discussion around the alias. I think in most cases
it turned out to not be necessary to have.

I think overall having a reset-manager is a good thing. But as already
mentioned in the other emails, why stop at the PL? I think this should
just become the Zynq reset controller and handle all the resets in the
SLCR.

	Thanks,
	Sören