* [PATCH v7 1/8] usb: gadget: epautoconf: rework ep_matches() function
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 2/8] usb: gadget: add 'ep_match' callback to usb_gadget_ops Robert Baldyga
` (6 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Rework ep_matches() function to make it shorter and more readable.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 81 ++++++++++++++++-------------------------
1 file changed, 32 insertions(+), 49 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 52658fe..95e1275 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -32,7 +32,6 @@ ep_matches (
{
u8 type;
u16 max;
-
int num_req_streams = 0;
/* endpoint already claimed? */
@@ -40,6 +39,20 @@ ep_matches (
return 0;
type = usb_endpoint_type(desc);
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
+ if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+ return 0;
+ if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+ return 0;
+
+ if (max > ep->maxpacket_limit)
+ return 0;
+
+ /* "high bandwidth" works only at high speed */
+ if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+ return 0;
+
switch (type) {
case USB_ENDPOINT_XFER_CONTROL:
/* only support ep0 for portable CONTROL traffic */
@@ -47,66 +60,36 @@ ep_matches (
case USB_ENDPOINT_XFER_ISOC:
if (!ep->caps.type_iso)
return 0;
+ /* ISO: limit 1023 bytes full speed,
+ * 1024 high/super speed
+ */
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
+ return 0;
break;
case USB_ENDPOINT_XFER_BULK:
if (!ep->caps.type_bulk)
return 0;
+ if (ep_comp && gadget_is_superspeed(gadget)) {
+ /* Get the number of required streams from the
+ * EP companion descriptor and see if the EP
+ * matches it
+ */
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
break;
case USB_ENDPOINT_XFER_INT:
- /* bulk endpoints handle interrupt transfers,
+ /* Bulk endpoints handle interrupt transfers,
* except the toggle-quirky iso-synch kind
*/
if (!ep->caps.type_int && !ep->caps.type_bulk)
return 0;
- break;
- }
-
- if (usb_endpoint_dir_in(desc)) {
- if (!ep->caps.dir_in)
- return 0;
- } else {
- if (!ep->caps.dir_out)
- return 0;
- }
-
- /*
- * Get the number of required streams from the EP companion
- * descriptor and see if the EP matches it
- */
- if (usb_endpoint_xfer_bulk(desc)) {
- if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
- num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
- return 0;
- }
-
- }
-
- /* endpoint maxpacket size is an input parameter, except for bulk
- * where it's an output parameter representing the full speed limit.
- * the usb spec fixes high speed bulk maxpacket at 512 bytes.
- */
- max = 0x7ff & usb_endpoint_maxp(desc);
- switch (type) {
- case USB_ENDPOINT_XFER_INT:
- /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ /* INT: limit 64 bytes full speed,
+ * 1024 high/super speed
+ */
if (!gadget_is_dualspeed(gadget) && max > 64)
return 0;
- /* FALLTHROUGH */
-
- case USB_ENDPOINT_XFER_ISOC:
- /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
- if (ep->maxpacket_limit < max)
- return 0;
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
-
- /* BOTH: "high bandwidth" works only at high speed */
- if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
- if (!gadget_is_dualspeed(gadget))
- return 0;
- /* configure your hardware with enough buffering!! */
- }
break;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 2/8] usb: gadget: add 'ep_match' callback to usb_gadget_ops
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 1/8] usb: gadget: epautoconf: rework ep_matches() function Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 3/8] usb: gadget: move ep_matches() from epautoconf to udc-core Robert Baldyga
` (5 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Add callback that is called by epautoconf to allow UDC driver match the
best endpoint for specific descriptor. It's intended to supply mechanism
which allows to get rid of chip-specific endpoint matching code from
epautoconf.
If gadget has set 'ep_match' callback we prefer to call it first, and
if it fails to find matching endpoint, then we try to use default matching
algorithm.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 6 ++++++
include/linux/usb/gadget.h | 3 +++
2 files changed, 9 insertions(+)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 95e1275..f000c73 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -165,6 +165,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ if (gadget->ops->match_ep) {
+ ep = gadget->ops->match_ep(gadget, desc, ep_comp);
+ if (ep)
+ goto found_ep;
+ }
+
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 82b5bcb..303214b 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -534,6 +534,9 @@ struct usb_gadget_ops {
int (*udc_start)(struct usb_gadget *,
struct usb_gadget_driver *);
int (*udc_stop)(struct usb_gadget *);
+ struct usb_ep *(*match_ep)(struct usb_gadget *,
+ struct usb_endpoint_descriptor *,
+ struct usb_ss_ep_comp_descriptor *);
};
/**
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 3/8] usb: gadget: move ep_matches() from epautoconf to udc-core
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 1/8] usb: gadget: epautoconf: rework ep_matches() function Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 2/8] usb: gadget: add 'ep_match' callback to usb_gadget_ops Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 4/8] usb: gadget: move find_ep() " Robert Baldyga
` (4 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Move ep_matches() function to udc-core and rename it to
usb_gadget_ep_match_desc(). This function can be used by UDC drivers
in 'match_ep' callback to avoid writing lots of repetitive code.
Replace all calls of ep_matches() with usb_gadget_ep_match_desc().
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 95 +++++----------------------------------
drivers/usb/gadget/udc/udc-core.c | 69 ++++++++++++++++++++++++++++
include/linux/usb/gadget.h | 8 ++++
3 files changed, 88 insertions(+), 84 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index f000c73..d49af4f 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,82 +22,6 @@
#include "gadget_chips.h"
-static int
-ep_matches (
- struct usb_gadget *gadget,
- struct usb_ep *ep,
- struct usb_endpoint_descriptor *desc,
- struct usb_ss_ep_comp_descriptor *ep_comp
-)
-{
- u8 type;
- u16 max;
- int num_req_streams = 0;
-
- /* endpoint already claimed? */
- if (ep->claimed)
- return 0;
-
- type = usb_endpoint_type(desc);
- max = 0x7ff & usb_endpoint_maxp(desc);
-
- if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
- return 0;
- if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
- return 0;
-
- if (max > ep->maxpacket_limit)
- return 0;
-
- /* "high bandwidth" works only at high speed */
- if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
- return 0;
-
- switch (type) {
- case USB_ENDPOINT_XFER_CONTROL:
- /* only support ep0 for portable CONTROL traffic */
- return 0;
- case USB_ENDPOINT_XFER_ISOC:
- if (!ep->caps.type_iso)
- return 0;
- /* ISO: limit 1023 bytes full speed,
- * 1024 high/super speed
- */
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
- break;
- case USB_ENDPOINT_XFER_BULK:
- if (!ep->caps.type_bulk)
- return 0;
- if (ep_comp && gadget_is_superspeed(gadget)) {
- /* Get the number of required streams from the
- * EP companion descriptor and see if the EP
- * matches it
- */
- num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
- return 0;
- }
- break;
- case USB_ENDPOINT_XFER_INT:
- /* Bulk endpoints handle interrupt transfers,
- * except the toggle-quirky iso-synch kind
- */
- if (!ep->caps.type_int && !ep->caps.type_bulk)
- return 0;
- /* INT: limit 64 bytes full speed,
- * 1024 high/super speed
- */
- if (!gadget_is_dualspeed(gadget) && max > 64)
- return 0;
- break;
- }
-
- /* MATCH!! */
-
- return 1;
-}
-
static struct usb_ep *
find_ep (struct usb_gadget *gadget, const char *name)
{
@@ -180,10 +104,12 @@ struct usb_ep *usb_ep_autoconfig_ss(
if (type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
ep = find_ep(gadget, "ep-e");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
ep = find_ep(gadget, "ep-f");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
}
@@ -191,20 +117,21 @@ struct usb_ep *usb_ep_autoconfig_ss(
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
ep = find_ep(gadget, name);
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
ep = find_ep(gadget, "ep3-bulk");
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
ep = find_ep(gadget, "ep2-bulk");
- if (ep && ep_matches(gadget, ep, desc,
- ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget,
+ ep, desc, ep_comp))
goto found_ep;
}
@@ -223,14 +150,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
ep = find_ep(gadget, "ep2out");
} else
ep = NULL;
- if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
#endif
}
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (ep_matches(gadget, ep, desc, ep_comp))
+ if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
}
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 362ee8a..b6427d1 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -131,6 +131,75 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
/* ------------------------------------------------------------------------- */
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+ struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ u8 type;
+ u16 max;
+ int num_req_streams = 0;
+
+ /* endpoint already claimed? */
+ if (ep->claimed)
+ return 0;
+
+ type = usb_endpoint_type(desc);
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
+ if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+ return 0;
+ if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+ return 0;
+
+ if (max > ep->maxpacket_limit)
+ return 0;
+
+ /* "high bandwidth" works only at high speed */
+ if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+ return 0;
+
+ switch (type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* only support ep0 for portable CONTROL traffic */
+ return 0;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (!ep->caps.type_iso)
+ return 0;
+ /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if (!ep->caps.type_bulk)
+ return 0;
+ if (ep_comp && gadget_is_superspeed(gadget)) {
+ /* Get the number of required streams from the
+ * EP companion descriptor and see if the EP
+ * matches it
+ */
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ /* Bulk endpoints handle interrupt transfers,
+ * except the toggle-quirky iso-synch kind
+ */
+ if (!ep->caps.type_int && !ep->caps.type_bulk)
+ return 0;
+ /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 64)
+ return 0;
+ break;
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
static void usb_gadget_state_work(struct work_struct *work)
{
struct usb_gadget *gadget = work_to_gadget(work);
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 303214b..e04fd63 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -1204,6 +1204,14 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep,
/*-------------------------------------------------------------------------*/
+/* utility to check if endpoint caps match descriptor needs */
+
+extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+ struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp);
+
+/*-------------------------------------------------------------------------*/
+
/* utility to update vbus status for udc core, it may be scheduled */
extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 4/8] usb: gadget: move find_ep() from epautoconf to udc-core
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
` (2 preceding siblings ...)
2015-08-06 7:58 ` [PATCH v7 3/8] usb: gadget: move ep_matches() from epautoconf to udc-core Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 5/8] usb: gadget: net2280: add net2280_match_ep() function Robert Baldyga
` (3 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Move find_ep() to udc-core and rename it to gadget_find_ep_by_name().
It can be used in UDC drivers, especially in 'match_ep' callback after
moving chip-specific endpoint matching logic from epautoconf to UDC
drivers.
Replace all calls of find_ep() function with gadget_find_ep_by_name().
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 30 +++++++++---------------------
drivers/usb/gadget/udc/udc-core.c | 21 +++++++++++++++++++++
include/linux/usb/gadget.h | 8 +++++++-
3 files changed, 37 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index d49af4f..a39ca03 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -22,18 +22,6 @@
#include "gadget_chips.h"
-static struct usb_ep *
-find_ep (struct usb_gadget *gadget, const char *name)
-{
- struct usb_ep *ep;
-
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (0 == strcmp (ep->name, name))
- return ep;
- }
- return NULL;
-}
-
/**
* usb_ep_autoconfig_ss() - choose an endpoint matching the ep
* descriptor and ep companion descriptor
@@ -103,11 +91,11 @@ struct usb_ep *usb_ep_autoconfig_ss(
if (type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = find_ep(gadget, "ep-e");
+ ep = gadget_find_ep_by_name(gadget, "ep-e");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
- ep = find_ep(gadget, "ep-f");
+ ep = gadget_find_ep_by_name(gadget, "ep-f");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
@@ -116,20 +104,20 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* USB3380: use same address for usb and hardware endpoints */
snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
usb_endpoint_dir_in(desc) ? "in" : "out");
- ep = find_ep(gadget, name);
+ ep = gadget_find_ep_by_name(gadget, name);
if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
- ep = find_ep(gadget, "ep3-bulk");
+ ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
- ep = find_ep(gadget, "ep2-bulk");
+ ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
if (ep && usb_gadget_ep_match_desc(gadget,
ep, desc, ep_comp))
goto found_ep;
@@ -140,14 +128,14 @@ struct usb_ep *usb_ep_autoconfig_ss(
if ((USB_ENDPOINT_XFER_BULK == type) ||
(USB_ENDPOINT_XFER_ISOC == type)) {
if (USB_DIR_IN & desc->bEndpointAddress)
- ep = find_ep (gadget, "ep5in");
+ ep = gadget_find_ep_by_name(gadget, "ep5in");
else
- ep = find_ep (gadget, "ep6out");
+ ep = gadget_find_ep_by_name(gadget, "ep6out");
} else if (USB_ENDPOINT_XFER_INT == type) {
if (USB_DIR_IN & desc->bEndpointAddress)
- ep = find_ep(gadget, "ep1in");
+ ep = gadget_find_ep_by_name(gadget, "ep1in");
else
- ep = find_ep(gadget, "ep2out");
+ ep = gadget_find_ep_by_name(gadget, "ep2out");
} else
ep = NULL;
if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index b6427d1..3c954b5 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -131,6 +131,27 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
/* ------------------------------------------------------------------------- */
+/**
+ * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ * in second parameter or NULL if searched endpoint not found
+ * @g: controller to check for quirk
+ * @name: name of searched endpoint
+ */
+struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
+{
+ struct usb_ep *ep;
+
+ gadget_for_each_ep(ep, g) {
+ if (!strcmp(ep->name, name))
+ return ep;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
+
+/* ------------------------------------------------------------------------- */
+
int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
struct usb_ss_ep_comp_descriptor *ep_comp)
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index e04fd63..c14a69b3 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -639,7 +639,6 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
#define gadget_for_each_ep(tmp, gadget) \
list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
-
/**
* usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
* requires quirk_ep_out_aligned_size, otherwise reguens len.
@@ -1204,6 +1203,13 @@ extern void usb_gadget_giveback_request(struct usb_ep *ep,
/*-------------------------------------------------------------------------*/
+/* utility to find endpoint by name */
+
+extern struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g,
+ const char *name);
+
+/*-------------------------------------------------------------------------*/
+
/* utility to check if endpoint caps match descriptor needs */
extern int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 5/8] usb: gadget: net2280: add net2280_match_ep() function
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
` (3 preceding siblings ...)
2015-08-06 7:58 ` [PATCH v7 4/8] usb: gadget: move find_ep() " Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 6/8] usb: gadget: goku_udc: add goku_match_ep() function Robert Baldyga
` (2 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 23 +----------------------
drivers/usb/gadget/udc/net2280.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index a39ca03..0ff5134 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,28 +86,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_net2280(gadget)) {
- char name[8];
-
- if (type == USB_ENDPOINT_XFER_INT) {
- /* ep-e, ep-f are PIO with only 64 byte fifos */
- ep = gadget_find_ep_by_name(gadget, "ep-e");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- ep = gadget_find_ep_by_name(gadget, "ep-f");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- }
-
- /* USB3380: use same address for usb and hardware endpoints */
- snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
- usb_endpoint_dir_in(desc) ? "in" : "out");
- ep = gadget_find_ep_by_name(gadget, name);
- if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
- } else if (gadget_is_goku (gadget)) {
+ if (gadget_is_goku(gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 872ca25..9d7eac1 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1550,6 +1550,36 @@ static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
return 0;
}
+static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ char name[8];
+ struct usb_ep *ep;
+ u8 type;
+
+ type = usb_endpoint_type(desc);
+
+ if (type == USB_ENDPOINT_XFER_INT) {
+ /* ep-e, ep-f are PIO with only 64 byte fifos */
+ ep = gadget_find_ep_by_name(_gadget, "ep-e");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ ep = gadget_find_ep_by_name(_gadget, "ep-f");
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+ }
+
+ /* USB3380: use same address for usb and hardware endpoints */
+ snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
+ usb_endpoint_dir_in(desc) ? "in" : "out");
+ ep = gadget_find_ep_by_name(_gadget, name);
+ if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+ return ep;
+
+ return NULL;
+}
+
static int net2280_start(struct usb_gadget *_gadget,
struct usb_gadget_driver *driver);
static int net2280_stop(struct usb_gadget *_gadget);
@@ -1561,6 +1591,7 @@ static const struct usb_gadget_ops net2280_ops = {
.pullup = net2280_pullup,
.udc_start = net2280_start,
.udc_stop = net2280_stop,
+ .match_ep = net2280_match_ep,
};
/*-------------------------------------------------------------------------*/
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 6/8] usb: gadget: goku_udc: add goku_match_ep() function
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
` (4 preceding siblings ...)
2015-08-06 7:58 ` [PATCH v7 5/8] usb: gadget: net2280: add net2280_match_ep() function Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 11:17 ` Sergei Shtylyov
2015-08-06 7:58 ` [PATCH v7 7/8] usb: musb: gadget: add musb_match_ep() function Robert Baldyga
2015-08-06 7:58 ` [PATCH v7 8/8] usb: gadget: remove gadget_chips.h Robert Baldyga
7 siblings, 1 reply; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 20 ++------------------
drivers/usb/gadget/udc/goku_udc.c | 25 +++++++++++++++++++++++++
2 files changed, 27 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 0ff5134..574b6a4 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -86,24 +86,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
/* First, apply chip-specific "best usage" knowledge.
* This might make a good usb_gadget_ops hook ...
*/
- if (gadget_is_goku(gadget)) {
- if (USB_ENDPOINT_XFER_INT == type) {
- /* single buffering is enough */
- ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- } else if (USB_ENDPOINT_XFER_BULK == type
- && (USB_DIR_IN & desc->bEndpointAddress)) {
- /* DMA may be available */
- ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
- if (ep && usb_gadget_ep_match_desc(gadget,
- ep, desc, ep_comp))
- goto found_ep;
- }
-
#ifdef CONFIG_BLACKFIN
- } else if (gadget_is_musbhdrc(gadget)) {
+ if (gadget_is_musbhdrc(gadget)) {
if ((USB_ENDPOINT_XFER_BULK == type) ||
(USB_ENDPOINT_XFER_ISOC == type)) {
if (USB_DIR_IN & desc->bEndpointAddress)
@@ -119,8 +103,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
ep = NULL;
if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
goto found_ep;
-#endif
}
+#endif
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 46b8d14..d5a93ea 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -990,6 +990,30 @@ static int goku_get_frame(struct usb_gadget *_gadget)
return -EOPNOTSUPP;
}
+static struct usb_ep *goku_match_ep(struct usb_gadget *g,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ struct goku_udc *dev = to_goku_udc(g);
+ struct usb_ep *ep;
+ u8 type = usb_endpoint_type(desc);
+
+ if (type == USB_ENDPOINT_XFER_INT) {
+ /* single buffering is enough */
+ ep = &dev->ep[3].ep;
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+ } else if (type == USB_ENDPOINT_XFER_BULK
+ && usb_endpoint_dir_in(desc)) {
+ /* DMA may be available */
+ ep = &dev->ep[2].ep;
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+ }
+
+ return NULL;
+}
+
static int goku_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int goku_udc_stop(struct usb_gadget *g);
@@ -998,6 +1022,7 @@ static const struct usb_gadget_ops goku_ops = {
.get_frame = goku_get_frame,
.udc_start = goku_udc_start,
.udc_stop = goku_udc_stop,
+ .match_ep = goku_match_ep,
// no remote wakeup
// not selfpowered
};
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 6/8] usb: gadget: goku_udc: add goku_match_ep() function
2015-08-06 7:58 ` [PATCH v7 6/8] usb: gadget: goku_udc: add goku_match_ep() function Robert Baldyga
@ 2015-08-06 11:17 ` Sergei Shtylyov
0 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2015-08-06 11:17 UTC (permalink / raw)
To: Robert Baldyga, balbi; +Cc: gregkh, linux-kernel, linux-usb, stern
Hello.
On 8/6/2015 10:58 AM, Robert Baldyga wrote:
> Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
> process. Function does the same that was done by chip-specific code inside
> of epautoconf. Now this code can be removed from there to separate generic code
> from platform specific logic.
> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> ---
> drivers/usb/gadget/epautoconf.c | 20 ++------------------
> drivers/usb/gadget/udc/goku_udc.c | 25 +++++++++++++++++++++++++
> 2 files changed, 27 insertions(+), 18 deletions(-)
> diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
> index 0ff5134..574b6a4 100644
> --- a/drivers/usb/gadget/epautoconf.c
> +++ b/drivers/usb/gadget/epautoconf.c
> @@ -86,24 +86,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
> /* First, apply chip-specific "best usage" knowledge.
> * This might make a good usb_gadget_ops hook ...
> */
> - if (gadget_is_goku(gadget)) {
> - if (USB_ENDPOINT_XFER_INT == type) {
> - /* single buffering is enough */
> - ep = gadget_find_ep_by_name(gadget, "ep3-bulk");
> - if (ep && usb_gadget_ep_match_desc(gadget,
> - ep, desc, ep_comp))
> - goto found_ep;
> - } else if (USB_ENDPOINT_XFER_BULK == type
> - && (USB_DIR_IN & desc->bEndpointAddress)) {
> - /* DMA may be available */
> - ep = gadget_find_ep_by_name(gadget, "ep2-bulk");
> - if (ep && usb_gadget_ep_match_desc(gadget,
> - ep, desc, ep_comp))
> - goto found_ep;
> - }
> -
> #ifdef CONFIG_BLACKFIN
> - } else if (gadget_is_musbhdrc(gadget)) {
> + if (gadget_is_musbhdrc(gadget)) {
> if ((USB_ENDPOINT_XFER_BULK == type) ||
> (USB_ENDPOINT_XFER_ISOC == type)) {
> if (USB_DIR_IN & desc->bEndpointAddress)
> @@ -119,8 +103,8 @@ struct usb_ep *usb_ep_autoconfig_ss(
> ep = NULL;
> if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
> goto found_ep;
> -#endif
> }
> +#endif
>
> /* Second, look at endpoints until an unclaimed one looks usable */
> list_for_each_entry (ep, &gadget->ep_list, ep_list) {
> diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
> index 46b8d14..d5a93ea 100644
> --- a/drivers/usb/gadget/udc/goku_udc.c
> +++ b/drivers/usb/gadget/udc/goku_udc.c
> @@ -990,6 +990,30 @@ static int goku_get_frame(struct usb_gadget *_gadget)
> return -EOPNOTSUPP;
> }
>
> +static struct usb_ep *goku_match_ep(struct usb_gadget *g,
> + struct usb_endpoint_descriptor *desc,
> + struct usb_ss_ep_comp_descriptor *ep_comp)
> +{
> + struct goku_udc *dev = to_goku_udc(g);
> + struct usb_ep *ep;
> + u8 type = usb_endpoint_type(desc);
> +
> + if (type == USB_ENDPOINT_XFER_INT) {
> + /* single buffering is enough */
> + ep = &dev->ep[3].ep;
> + if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
> + return ep;
> + } else if (type == USB_ENDPOINT_XFER_BULK
> + && usb_endpoint_dir_in(desc)) {
> + /* DMA may be available */
> + ep = &dev->ep[2].ep;
> + if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
> + return ep;
You used *switch* in the MUSB driver but not here, despite the above is
also asking for *switch*. Why? :-)
> + }
> +
> + return NULL;
> +}
> +
MBR, Sergei
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 7/8] usb: musb: gadget: add musb_match_ep() function
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
` (5 preceding siblings ...)
2015-08-06 7:58 ` [PATCH v7 6/8] usb: gadget: goku_udc: add goku_match_ep() function Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
2015-08-06 11:18 ` Sergei Shtylyov
2015-08-06 7:58 ` [PATCH v7 8/8] usb: gadget: remove gadget_chips.h Robert Baldyga
7 siblings, 1 reply; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
process. Function does the same that was done by chip-specific code inside
of epautoconf. Now this code can be removed from there to separate generic code
from platform specific logic.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 23 -----------------------
drivers/usb/musb/musb_gadget.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+), 23 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 574b6a4..16c1cc9 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -83,29 +83,6 @@ struct usb_ep *usb_ep_autoconfig_ss(
goto found_ep;
}
- /* First, apply chip-specific "best usage" knowledge.
- * This might make a good usb_gadget_ops hook ...
- */
-#ifdef CONFIG_BLACKFIN
- if (gadget_is_musbhdrc(gadget)) {
- if ((USB_ENDPOINT_XFER_BULK == type) ||
- (USB_ENDPOINT_XFER_ISOC == type)) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = gadget_find_ep_by_name(gadget, "ep5in");
- else
- ep = gadget_find_ep_by_name(gadget, "ep6out");
- } else if (USB_ENDPOINT_XFER_INT == type) {
- if (USB_DIR_IN & desc->bEndpointAddress)
- ep = gadget_find_ep_by_name(gadget, "ep1in");
- else
- ep = gadget_find_ep_by_name(gadget, "ep2out");
- } else
- ep = NULL;
- if (ep && usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
- }
-#endif
-
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4150baf..ac2f188 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1684,6 +1684,39 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
return 0;
}
+#ifdef CONFIG_BLACKFIN
+static struct usb_ep *musb_match_ep(struct usb_gadget *g,
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+ struct usb_ep *ep = NULL;
+ u8 type = usb_endpoint_type(desc);
+
+ switch (type) {
+ case USB_ENDPOINT_XFER_ISOC:
+ case USB_ENDPOINT_XFER_BULK:
+ if (usb_endpoint_dir_in(desc))
+ ep = gadget_find_ep_by_name(g, "ep5in");
+ else
+ ep = gadget_find_ep_by_name(g, "ep6out");
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (usb_endpoint_dir_in(desc))
+ ep = gadget_find_ep_by_name(g, "ep1in");
+ else
+ ep = gadget_find_ep_by_name(g, "ep2out");
+ default:
+ }
+
+ if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
+ return ep;
+
+ return NULL;
+}
+#else
+#define musb_match_ep NULL
+#endif
+
static int musb_gadget_start(struct usb_gadget *g,
struct usb_gadget_driver *driver);
static int musb_gadget_stop(struct usb_gadget *g);
@@ -1697,6 +1730,7 @@ static const struct usb_gadget_ops musb_gadget_operations = {
.pullup = musb_gadget_pullup,
.udc_start = musb_gadget_start,
.udc_stop = musb_gadget_stop,
+ .match_ep = musb_match_ep,
};
/* ----------------------------------------------------------------------- */
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 7/8] usb: musb: gadget: add musb_match_ep() function
2015-08-06 7:58 ` [PATCH v7 7/8] usb: musb: gadget: add musb_match_ep() function Robert Baldyga
@ 2015-08-06 11:18 ` Sergei Shtylyov
0 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2015-08-06 11:18 UTC (permalink / raw)
To: Robert Baldyga, balbi; +Cc: gregkh, linux-kernel, linux-usb, stern
On 8/6/2015 10:58 AM, Robert Baldyga wrote:
> Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching
> process. Function does the same that was done by chip-specific code inside
> of epautoconf. Now this code can be removed from there to separate generic code
> from platform specific logic.
> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
> ---
> drivers/usb/gadget/epautoconf.c | 23 -----------------------
> drivers/usb/musb/musb_gadget.c | 34 ++++++++++++++++++++++++++++++++++
> 2 files changed, 34 insertions(+), 23 deletions(-)
[...]
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 4150baf..ac2f188 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -1684,6 +1684,39 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)
> return 0;
> }
>
> +#ifdef CONFIG_BLACKFIN
> +static struct usb_ep *musb_match_ep(struct usb_gadget *g,
> + struct usb_endpoint_descriptor *desc,
> + struct usb_ss_ep_comp_descriptor *ep_comp)
> +{
> + struct usb_ep *ep = NULL;
> + u8 type = usb_endpoint_type(desc);
You hardly need this variable.
> +
> + switch (type) {
> + case USB_ENDPOINT_XFER_ISOC:
> + case USB_ENDPOINT_XFER_BULK:
> + if (usb_endpoint_dir_in(desc))
> + ep = gadget_find_ep_by_name(g, "ep5in");
> + else
> + ep = gadget_find_ep_by_name(g, "ep6out");
> + break;
> + case USB_ENDPOINT_XFER_INT:
> + if (usb_endpoint_dir_in(desc))
> + ep = gadget_find_ep_by_name(g, "ep1in");
> + else
> + ep = gadget_find_ep_by_name(g, "ep2out");
> + default:
> + }
> +
> + if (ep && usb_gadget_ep_match_desc(g, ep, desc, ep_comp))
> + return ep;
> +
> + return NULL;
> +}
> +#else
> +#define musb_match_ep NULL
> +#endif
> +
> static int musb_gadget_start(struct usb_gadget *g,
> struct usb_gadget_driver *driver);
> static int musb_gadget_stop(struct usb_gadget *g);
[...]
MBR, Sergei
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 8/8] usb: gadget: remove gadget_chips.h
2015-08-06 7:58 [PATCH v7 0/8] usb: gadget: rework ep matching and claiming mechanism Robert Baldyga
` (6 preceding siblings ...)
2015-08-06 7:58 ` [PATCH v7 7/8] usb: musb: gadget: add musb_match_ep() function Robert Baldyga
@ 2015-08-06 7:58 ` Robert Baldyga
7 siblings, 0 replies; 11+ messages in thread
From: Robert Baldyga @ 2015-08-06 7:58 UTC (permalink / raw)
To: balbi; +Cc: gregkh, linux-kernel, linux-usb, stern, Robert Baldyga
This header file contains helpers for quirks based on UDC controller name.
Since we have generic quirk bitfields in usb_gadget structure for all of
these quirks we don't need to have this header any longer.
This patch removes gadget_chips.h file and makes sure that it's no longer
included anywhere in kernel sources.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
---
drivers/usb/gadget/epautoconf.c | 2 -
drivers/usb/gadget/function/f_acm.c | 1 -
drivers/usb/gadget/function/f_mass_storage.c | 1 -
drivers/usb/gadget/function/f_obex.c | 1 -
drivers/usb/gadget/function/f_serial.c | 1 -
drivers/usb/gadget/function/f_sourcesink.c | 1 -
drivers/usb/gadget/function/u_ether.h | 2 -
drivers/usb/gadget/function/u_uac1.h | 2 -
drivers/usb/gadget/legacy/audio.c | 1 -
drivers/usb/gadget/legacy/gmidi.c | 2 -
drivers/usb/gadget/legacy/hid.c | 1 -
drivers/usb/gadget/legacy/nokia.c | 1 -
drivers/usb/gadget/legacy/printer.c | 2 -
drivers/usb/gadget/legacy/serial.c | 1 -
drivers/usb/gadget/udc/gadget_chips.h | 55 ----------------------------
15 files changed, 74 deletions(-)
delete mode 100644 drivers/usb/gadget/udc/gadget_chips.h
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 16c1cc9..978435a 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -20,8 +20,6 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-#include "gadget_chips.h"
-
/**
* usb_ep_autoconfig_ss() - choose an endpoint matching the ep
* descriptor and ep companion descriptor
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index aad8165..be9df09 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -21,7 +21,6 @@
#include <linux/err.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/*
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 04c3bb6..11a7f5a 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -219,7 +219,6 @@
#include <linux/usb/gadget.h>
#include <linux/usb/composite.h>
-#include "gadget_chips.h"
#include "configfs.h"
diff --git a/drivers/usb/gadget/function/f_obex.c b/drivers/usb/gadget/function/f_obex.c
index 2682d59..5460426 100644
--- a/drivers/usb/gadget/function/f_obex.c
+++ b/drivers/usb/gadget/function/f_obex.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/*
diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c
index 2e02dfa..1d162e2 100644
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -16,7 +16,6 @@
#include <linux/device.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/*
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index e6af171..cbfaf86 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -20,7 +20,6 @@
#include <linux/err.h>
#include "g_zero.h"
-#include "gadget_chips.h"
#include "u_f.h"
/*
diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h
index 1384f00..c77145b 100644
--- a/drivers/usb/gadget/function/u_ether.h
+++ b/drivers/usb/gadget/function/u_ether.h
@@ -20,8 +20,6 @@
#include <linux/usb/cdc.h>
#include <linux/netdevice.h>
-#include "gadget_chips.h"
-
#define QMULT_DEFAULT 5
/*
diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h
index fe386df..5c2ac8e 100644
--- a/drivers/usb/gadget/function/u_uac1.h
+++ b/drivers/usb/gadget/function/u_uac1.h
@@ -21,8 +21,6 @@
#include <sound/pcm.h>
#include <sound/pcm_params.h>
-#include "gadget_chips.h"
-
#define FILE_PCM_PLAYBACK "/dev/snd/pcmC0D0p"
#define FILE_PCM_CAPTURE "/dev/snd/pcmC0D0c"
#define FILE_CONTROL "/dev/snd/controlC0"
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 9b2c1c6..685cf3b 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -15,7 +15,6 @@
#include <linux/module.h>
#include <linux/usb/composite.h>
-#include "gadget_chips.h"
#define DRIVER_DESC "Linux USB Audio Gadget"
#define DRIVER_VERSION "Feb 2, 2012"
diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
index 650568d..8a18348 100644
--- a/drivers/usb/gadget/legacy/gmidi.c
+++ b/drivers/usb/gadget/legacy/gmidi.c
@@ -35,8 +35,6 @@
#include <linux/usb/audio.h>
#include <linux/usb/midi.h>
-#include "gadget_chips.h"
-
#include "u_midi.h"
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index e4874d3..7e5d2c4 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -19,7 +19,6 @@
#include <linux/usb/composite.h>
#include <linux/usb/g_hid.h>
-#include "gadget_chips.h"
#define DRIVER_DESC "HID Gadget"
#define DRIVER_VERSION "2010/03/16"
diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c
index c20f3b5..8b3f6fb 100644
--- a/drivers/usb/gadget/legacy/nokia.c
+++ b/drivers/usb/gadget/legacy/nokia.c
@@ -23,7 +23,6 @@
#include "u_ether.h"
#include "u_phonet.h"
#include "u_ecm.h"
-#include "gadget_chips.h"
#include "f_mass_storage.h"
/* Defines */
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 0c1fc06..a22d30a 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -19,8 +19,6 @@
#include <linux/usb/gadget.h>
#include <linux/usb/g_printer.h>
-#include "gadget_chips.h"
-
USB_GADGET_COMPOSITE_OPTIONS();
#define DRIVER_DESC "Printer Gadget"
diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c
index 9836d16..c5d42e0 100644
--- a/drivers/usb/gadget/legacy/serial.c
+++ b/drivers/usb/gadget/legacy/serial.c
@@ -17,7 +17,6 @@
#include <linux/tty_flip.h>
#include "u_serial.h"
-#include "gadget_chips.h"
/* Defines */
diff --git a/drivers/usb/gadget/udc/gadget_chips.h b/drivers/usb/gadget/udc/gadget_chips.h
deleted file mode 100644
index bcd04bc..0000000
--- a/drivers/usb/gadget/udc/gadget_chips.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * USB device controllers have lots of quirks. Use these macros in
- * gadget drivers or other code that needs to deal with them, and which
- * autoconfigures instead of using early binding to the hardware.
- *
- * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
- * some config file that gets updated as new hardware is supported.
- * (And avoiding all runtime comparisons in typical one-choice configs!)
- *
- * NOTE: some of these controller drivers may not be available yet.
- * Some are available on 2.4 kernels; several are available, but not
- * yet pushed in the 2.6 mainline tree.
- */
-
-#ifndef __GADGET_CHIPS_H
-#define __GADGET_CHIPS_H
-
-#include <linux/usb/gadget.h>
-
-/*
- * NOTICE: the entries below are alphabetical and should be kept
- * that way.
- *
- * Always be sure to add new entries to the correct position or
- * accept the bashing later.
- *
- * If you have forgotten the alphabetical order let VIM/EMACS
- * do that for you.
- */
-#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
-#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
-#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
-#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
-#define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name))
-#define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name))
-
-/**
- * gadget_supports_altsettings - return true if altsettings work
- * @gadget: the gadget in question
- */
-static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
-{
- /* PXA 21x/25x/26x has no altsettings at all */
- if (gadget_is_pxa(gadget))
- return false;
-
- /* PXA 27x and 3xx have *broken* altsetting support */
- if (gadget_is_pxa27x(gadget))
- return false;
-
- /* Everything else is *presumably* fine ... */
- return true;
-}
-
-#endif /* __GADGET_CHIPS_H */
--
1.9.1
^ permalink raw reply related [flat|nested] 11+ messages in thread