[PULL] clockevents changes for 4.3

[PULL] clockevents changes for 4.3

[Daniel Lezcano]

Hi Ingo,


this pull request contains the following changes for 4.3.

  - Simplified exynos_mct code by removing container_of (Alexey Klimov)

  - Fixed Kconfig option with OF (Antonio Borneo)

  - Fixed typo in structure initialization for the atmel timer (Daniel 
Lezcano)

  - Removed obsolete platform_device_id entries for sh-cmt-32/48/48-gen2 
(Geert Uytterhoeven)

  - Added dynamic irq flag for the dw_apb timer (Jisheng Zhang)

  - Migrated the timers to the new 'set-state' interface (Viresh Kumar)

Thanks !

   -- Daniel


The following changes since commit d74892c5b291c0010295d26d6b1e11cd70451722:

   clockevents: Drop redundant cpumask check in tick_check_new_device() 
(2015-08-01 12:00:13 +0200)

are available in the git repository at:

   http://git.linaro.org/people/daniel.lezcano/linux.git clockevents/4.3

for you to fetch changes up to 2b5cf544934fe15f7b2f8bd26696284606f9e7d3:

   cris/time: Migrate to new 'set-state' interface (2015-08-10 11:41:08 
+0200)

----------------------------------------------------------------
Alexey Klimov (1):
       clockevents/drivers/exynos_mct: Remove unneeded container_of()

Antonio Borneo (1):
       clockevents/drivers/Kconfig: Replace USE_OF with OF

Daniel Lezcano (1):
       clockevents/drivers/timer-atmel-pit: Fix typo in structure 
initialization

Geert Uytterhoeven (3):
       clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-32-fast 
platform_device_id entry
       clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48-gen2 
platform_device_id entry
       clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48 
platform_device_id entry

Jisheng Zhang (1):
       clockevents/drivers/dw_apb_timer: Add dynamic irq flag to the timer

Viresh Kumar (67):
       clockevents/drivers/arm_arch_timer: Migrate to new 'set-state' 
interface
       clockevents/drivers/arm_global_timer: Migrate to new 'set-state' 
interface
       clockevents/drivers/bcm2835: Migrate to new 'set-state' interface
       clockevents/drivers/bcm_kona: Migrate to new 'set-state' interface
       clockevents/drivers/cs5535: Migrate to new 'set-state' interface
       clockevents/drivers/em_sti: Migrate to new 'set-state' interface
       clockevents/drivers/asm9260: Migrate to new 'set-state' interface
       clockevents/drivers/cadence_ttc: Migrate to new 'set-state' interface
       clockevents/drivers/clps711x: Migrate to new 'set-state' interface
       clockevents/drivers/dummy_timer: Migrate to new 'set-state' interface
       clockevents/drivers/dw_apb: Migrate to new 'set-state' interface
       clockevents/drivers/fsl_ftm: Migrate to new 'set-state' interface
       clockevents/drivers/i8253: Migrate to new 'set-state' interface
       clockevents/drivers/meson6: Migrate to new 'set-state' interface
       clockevents/drivers/metag_generic: Migrate to new 'set-state' 
interface
       clockevents/drivers/mips-gic: Migrate to new 'set-state' interface
       clockevents/drivers/moxart: Migrate to new 'set-state' interface
       clockevents/drivers/mtk: Migrate to new 'set-state' interface
       clockevents/drivers/mxs: Migrate to new 'set-state' interface
       clockevents/drivers/nomadik-mtu: Migrate to new 'set-state' interface
       clockevents/drivers/pxa: Migrate to new 'set-state' interface
       clockevents/drivers/qcom: Migrate to new 'set-state' interface
       clockevents/drivers/rockchip: Migrate to new 'set-state' interface
       clockevents/drivers/samsung_pwm: Migrate to new 'set-state' interface
       clockevents/drivers/sh_cmt: Migrate to new 'set-state' interface
       clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface
       clockevents/drivers/sh_tmu: Migrate to new 'set-state' interface
       clockevents/drivers/sun4i: Migrate to new 'set-state' interface
       clockevents/drivers/tegra20: Migrate to new 'set-state' interface
       clockevents/drivers/time-armada-370-xp: Migrate to new 
'set-state' interface
       clockevents/drivers/efm32: Migrate to new 'set-state' interface
       clockevents/drivers/orion: Migrate to new 'set-state' interface
       clockevents/drivers/atlas7: Migrate to new 'set-state' interface
       clockevents/drivers/atmel: Migrate to new 'set-state' interface
       clockevents/drivers/atmel-st: Migrate to new 'set-state' interface
       clockevents/drivers/digicolor: Migrate to new 'set-state' interface
       clockevents/drivers/integrator: Migrate to new 'set-state' interface
       clockevents/drivers/keystone: Migrate to new 'set-state' interface
       clockevents/drivers/prima2: Migrate to new 'set-state' interface
       clockevents/drivers/stm32: Migrate to new 'set-state' interface
       clockevents/drivers/sun5i: Migrate to new 'set-state' interface
       clockevents/drivers/u300: Migrate to new 'set-state' interface
       clockevents/drivers/vf_pit: Migrate to new 'set-state' interface
       clockevents/drivers/vt8500: Migrate to new 'set-state' interface
       clockevents/drivers/zevio: Migrate to new 'set-state' interface
       clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface
       clockevents/drivers/exynos_mct: Migrate to new 'set-state' interface
       clockevents/drivers/timer-imx-gpt: Migrate to new 'set-state' 
interface
       clockevents/drivers/timer-sp804: Migrate to new 'set-state' interface
       clocksource/drivers/sh_tmu: Fix traceback spotted in -next
       clockevents/drivers/h8300_timer8: Migrate to new 'set-state' 
interface
       alpha/time: Migrate to new 'set-state' interface
       blackfin/time-ts: Migrate to new 'set-state' interface
       c6x/timer64: Migrate to new 'set-state' interface
       microblaze/timer: Migrate to new 'set-state' interface
       mn10300/cevt-mn10300: Migrate to new 'set-state' interface
       openrisc/time: Migrate to new 'set-state' interface
       powerpc/time: Migrate to new 'set-state' interface
       s390/time: Migrate to new 'set-state' interface
       score/time: Migrate to new 'set-state' interface
       sh/localtimer: Migrate to new 'set-state' interface
       sparc/time: Migrate to new 'set-state' interface
       um/time: Migrate to new 'set-state' interface
       unicore/time: Migrate to new 'set-state' interface
       xtensa/time: Migrate to new 'set-state' interface
       kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
       cris/time: Migrate to new 'set-state' interface

  arch/alpha/kernel/time.c                  |  18 ++--
  arch/blackfin/kernel/time-ts.c            | 136 +++++++++++++-------------
  arch/c6x/platforms/timer64.c              |  52 +++++-----
  arch/cris/arch-v32/kernel/time.c          |   8 +-
  arch/microblaze/kernel/timer.c            |  46 ++++-----
  arch/mn10300/kernel/cevt-mn10300.c        |   7 --
  arch/openrisc/kernel/time.c               |  24 -----
  arch/powerpc/kernel/time.c                |  24 ++---
  arch/s390/kernel/time.c                   |   6 --
  arch/score/kernel/time.c                  |  31 ++----
  arch/sh/kernel/localtimer.c               |   6 --
  arch/sparc/kernel/sun4m_smp.c             |   2 +-
  arch/sparc/kernel/time_32.c               |  57 ++++++-----
  arch/sparc/kernel/time_64.c               |  33 ++-----
  arch/um/kernel/time.c                     |  44 ++++-----
  arch/unicore32/kernel/time.c              |  29 ++----
  arch/x86/kernel/i8253.c                   |   2 +-
  arch/xtensa/kernel/time.c                 |  53 +++++-----
  drivers/clocksource/Kconfig               |   2 +-
  drivers/clocksource/arm_arch_timer.c      |  52 +++++-----
  drivers/clocksource/arm_global_timer.c    |  37 ++++---
  drivers/clocksource/asm9260_timer.c       |  64 +++++++-----
  drivers/clocksource/bcm2835_timer.c       |  16 ---
  drivers/clocksource/bcm_kona_timer.c      |  17 +---
  drivers/clocksource/cadence_ttc_timer.c   |  59 ++++++------
  drivers/clocksource/clps711x-timer.c      |   6 --
  drivers/clocksource/cs5535-clockevt.c     |  24 +++--
  drivers/clocksource/dummy_timer.c         |  10 --
  drivers/clocksource/dw_apb_timer.c        | 146 
++++++++++++++++------------
  drivers/clocksource/em_sti.c              |  39 +++-----
  drivers/clocksource/exynos_mct.c          | 101 +++++++++----------
  drivers/clocksource/fsl_ftm_timer.c       |  35 ++++---
  drivers/clocksource/h8300_timer8.c        |  51 +++++-----
  drivers/clocksource/i8253.c               |  77 ++++++++-------
  drivers/clocksource/meson6_timer.c        |  50 +++++-----
  drivers/clocksource/metag_generic.c       |  20 ----
  drivers/clocksource/mips-gic-timer.c      |   7 --
  drivers/clocksource/moxart_timer.c        |  49 +++++-----
  drivers/clocksource/mtk_timer.c           |  32 +++---
  drivers/clocksource/mxs_timer.c           |  80 ++++++---------
  drivers/clocksource/nomadik-mtu.c         |  58 +++++------
  drivers/clocksource/pxa_timer.c           |  39 +++-----
  drivers/clocksource/qcom-timer.c          |  24 ++---
  drivers/clocksource/rockchip_timer.c      |  32 +++---
  drivers/clocksource/samsung_pwm_timer.c   |  41 ++++----
  drivers/clocksource/sh_cmt.c              |  65 ++++++-------
  drivers/clocksource/sh_mtu2.c             |  42 +++-----
  drivers/clocksource/sh_tmu.c              |  64 ++++++------
  drivers/clocksource/sun4i_timer.c         |  41 ++++----
  drivers/clocksource/tcb_clksrc.c          |  93 ++++++++++--------
  drivers/clocksource/tegra20_timer.c       |  45 +++++----
  drivers/clocksource/time-armada-370-xp.c  |  53 +++++-----
  drivers/clocksource/time-efm32.c          |  66 +++++++------
  drivers/clocksource/time-orion.c          |  46 +++++----
  drivers/clocksource/timer-atlas7.c        |  19 ++--
  drivers/clocksource/timer-atmel-pit.c     |  45 ++++-----
  drivers/clocksource/timer-atmel-st.c      |  69 +++++++------
  drivers/clocksource/timer-digicolor.c     |  41 ++++----
  drivers/clocksource/timer-imx-gpt.c       |  75 ++++++++-------
  drivers/clocksource/timer-integrator-ap.c |  58 ++++++-----
  drivers/clocksource/timer-keystone.c      |  44 +++------
  drivers/clocksource/timer-prima2.c        |  34 +++----
  drivers/clocksource/timer-sp804.c         |  54 +++++------
  drivers/clocksource/timer-stm32.c         |  30 +++---
  drivers/clocksource/timer-sun5i.c         |  45 +++++----
  drivers/clocksource/timer-u300.c          | 155 
+++++++++++++++---------------
  drivers/clocksource/vf_pit_timer.c        |  27 +++---
  drivers/clocksource/vt8500_timer.c        |  29 ++----
  drivers/clocksource/zevio-timer.c         |  44 ++++-----
  kernel/time/tick-broadcast-hrtimer.c      |  49 ++++------
  70 files changed, 1451 insertions(+), 1628 deletions(-)


-- 
  <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[PATCH 01/74] clockevents/drivers/arm_arch_timer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate arm_arch_timer driver to the new 'set-state' interface provided
by the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 52 +++++++++++++++---------------------
 1 file changed, 22 insertions(+), 30 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 0aa135d..d6e3e49 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -181,44 +181,36 @@ static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
 	return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
 }
 
-static __always_inline void timer_set_mode(const int access, int mode,
-				  struct clock_event_device *clk)
+static __always_inline int timer_shutdown(const int access,
+					  struct clock_event_device *clk)
 {
 	unsigned long ctrl;
-	switch (mode) {
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
-		ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
-		arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
-		break;
-	default:
-		break;
-	}
+
+	ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
+
+	return 0;
 }
 
-static void arch_timer_set_mode_virt(enum clock_event_mode mode,
-				     struct clock_event_device *clk)
+static int arch_timer_shutdown_virt(struct clock_event_device *clk)
 {
-	timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode, clk);
+	return timer_shutdown(ARCH_TIMER_VIRT_ACCESS, clk);
 }
 
-static void arch_timer_set_mode_phys(enum clock_event_mode mode,
-				     struct clock_event_device *clk)
+static int arch_timer_shutdown_phys(struct clock_event_device *clk)
 {
-	timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode, clk);
+	return timer_shutdown(ARCH_TIMER_PHYS_ACCESS, clk);
 }
 
-static void arch_timer_set_mode_virt_mem(enum clock_event_mode mode,
-					 struct clock_event_device *clk)
+static int arch_timer_shutdown_virt_mem(struct clock_event_device *clk)
 {
-	timer_set_mode(ARCH_TIMER_MEM_VIRT_ACCESS, mode, clk);
+	return timer_shutdown(ARCH_TIMER_MEM_VIRT_ACCESS, clk);
 }
 
-static void arch_timer_set_mode_phys_mem(enum clock_event_mode mode,
-					 struct clock_event_device *clk)
+static int arch_timer_shutdown_phys_mem(struct clock_event_device *clk)
 {
-	timer_set_mode(ARCH_TIMER_MEM_PHYS_ACCESS, mode, clk);
+	return timer_shutdown(ARCH_TIMER_MEM_PHYS_ACCESS, clk);
 }
 
 static __always_inline void set_next_event(const int access, unsigned long evt,
@@ -273,11 +265,11 @@ static void __arch_timer_setup(unsigned type,
 		clk->cpumask = cpumask_of(smp_processor_id());
 		if (arch_timer_use_virtual) {
 			clk->irq = arch_timer_ppi[VIRT_PPI];
-			clk->set_mode = arch_timer_set_mode_virt;
+			clk->set_state_shutdown = arch_timer_shutdown_virt;
 			clk->set_next_event = arch_timer_set_next_event_virt;
 		} else {
 			clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
-			clk->set_mode = arch_timer_set_mode_phys;
+			clk->set_state_shutdown = arch_timer_shutdown_phys;
 			clk->set_next_event = arch_timer_set_next_event_phys;
 		}
 	} else {
@@ -286,17 +278,17 @@ static void __arch_timer_setup(unsigned type,
 		clk->rating = 400;
 		clk->cpumask = cpu_all_mask;
 		if (arch_timer_mem_use_virtual) {
-			clk->set_mode = arch_timer_set_mode_virt_mem;
+			clk->set_state_shutdown = arch_timer_shutdown_virt_mem;
 			clk->set_next_event =
 				arch_timer_set_next_event_virt_mem;
 		} else {
-			clk->set_mode = arch_timer_set_mode_phys_mem;
+			clk->set_state_shutdown = arch_timer_shutdown_phys_mem;
 			clk->set_next_event =
 				arch_timer_set_next_event_phys_mem;
 		}
 	}
 
-	clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, clk);
+	clk->set_state_shutdown(clk);
 
 	clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
 }
@@ -506,7 +498,7 @@ static void arch_timer_stop(struct clock_event_device *clk)
 			disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
 	}
 
-	clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+	clk->set_state_shutdown(clk);
 }
 
 static int arch_timer_cpu_notify(struct notifier_block *self,
-- 
1.9.1

[PATCH 02/74] clockevents/drivers/arm_global_timer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate arm_global_timer driver to the new 'set-state' interface
provided by the clockevents core, the earlier 'set-mode' interface is
marked obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/arm_global_timer.c | 37 ++++++++++++++++------------------
 1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
index e683377..29ea50a 100644
--- a/drivers/clocksource/arm_global_timer.c
+++ b/drivers/clocksource/arm_global_timer.c
@@ -107,26 +107,21 @@ static void gt_compare_set(unsigned long delta, int periodic)
 	writel(ctrl, gt_base + GT_CONTROL);
 }
 
-static void gt_clockevent_set_mode(enum clock_event_mode mode,
-				   struct clock_event_device *clk)
+static int gt_clockevent_shutdown(struct clock_event_device *evt)
 {
 	unsigned long ctrl;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl = readl(gt_base + GT_CONTROL);
-		ctrl &= ~(GT_CONTROL_COMP_ENABLE |
-				GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC);
-		writel(ctrl, gt_base + GT_CONTROL);
-		break;
-	default:
-		break;
-	}
+	ctrl = readl(gt_base + GT_CONTROL);
+	ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE |
+		  GT_CONTROL_AUTO_INC);
+	writel(ctrl, gt_base + GT_CONTROL);
+	return 0;
+}
+
+static int gt_clockevent_set_periodic(struct clock_event_device *evt)
+{
+	gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
+	return 0;
 }
 
 static int gt_clockevent_set_next_event(unsigned long evt,
@@ -155,7 +150,7 @@ static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
 	 *	the Global Timer flag _after_ having incremented
 	 *	the Comparator register	value to a higher value.
 	 */
-	if (evt->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(evt))
 		gt_compare_set(ULONG_MAX, 0);
 
 	writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);
@@ -171,7 +166,9 @@ static int gt_clockevents_init(struct clock_event_device *clk)
 	clk->name = "arm_global_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 		CLOCK_EVT_FEAT_PERCPU;
-	clk->set_mode = gt_clockevent_set_mode;
+	clk->set_state_shutdown = gt_clockevent_shutdown;
+	clk->set_state_periodic = gt_clockevent_set_periodic;
+	clk->set_state_oneshot = gt_clockevent_shutdown;
 	clk->set_next_event = gt_clockevent_set_next_event;
 	clk->cpumask = cpumask_of(cpu);
 	clk->rating = 300;
@@ -184,7 +181,7 @@ static int gt_clockevents_init(struct clock_event_device *clk)
 
 static void gt_clockevents_stop(struct clock_event_device *clk)
 {
-	gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+	gt_clockevent_shutdown(clk);
 	disable_percpu_irq(clk->irq);
 }
 
-- 
1.9.1

[PATCH 03/74] clockevents/drivers/bcm2835: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate bcm2835 driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/bcm2835_timer.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 26ed331..6f28229 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -54,21 +54,6 @@ static u64 notrace bcm2835_sched_read(void)
 	return readl_relaxed(system_clock);
 }
 
-static void bcm2835_time_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt_dev)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	default:
-		WARN(1, "%s: unhandled event mode %d\n", __func__, mode);
-		break;
-	}
-}
-
 static int bcm2835_time_set_next_event(unsigned long event,
 	struct clock_event_device *evt_dev)
 {
@@ -129,7 +114,6 @@ static void __init bcm2835_timer_init(struct device_node *node)
 	timer->evt.name = node->name;
 	timer->evt.rating = 300;
 	timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
-	timer->evt.set_mode = bcm2835_time_set_mode;
 	timer->evt.set_next_event = bcm2835_time_set_next_event;
 	timer->evt.cpumask = cpumask_of(0);
 	timer->act.name = node->name;
-- 
1.9.1

[PATCH 04/74] clockevents/drivers/bcm_kona: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate bcm_kona driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Oneshot callback isn't required as it was empty.

Acked-by: Ray Jui <rjui@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/bcm_kona_timer.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
index f1e33d0..e717e87 100644
--- a/drivers/clocksource/bcm_kona_timer.c
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -127,25 +127,18 @@ static int kona_timer_set_next_event(unsigned long clc,
 	return 0;
 }
 
-static void kona_timer_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *unused)
+static int kona_timer_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* by default mode is one shot don't do any thing */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		kona_timer_disable_and_clear(timers.tmr_regs);
-	}
+	kona_timer_disable_and_clear(timers.tmr_regs);
+	return 0;
 }
 
 static struct clock_event_device kona_clockevent_timer = {
 	.name = "timer 1",
 	.features = CLOCK_EVT_FEAT_ONESHOT,
 	.set_next_event = kona_timer_set_next_event,
-	.set_mode = kona_timer_set_mode
+	.set_state_shutdown = kona_timer_shutdown,
+	.tick_resume = kona_timer_shutdown,
 };
 
 static void __init kona_timer_clockevents_init(void)
-- 
1.9.1

[PATCH 05/74] clockevents/drivers/cs5535: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate cs5535 driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/cs5535-clockevt.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index db21052..9a7e37c 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -42,7 +42,6 @@ MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
  *  256         128   .125            512.000
  */
 
-static unsigned int cs5535_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
 static struct cs5535_mfgpt_timer *cs5535_event_clock;
 
 /* Selected from the table above */
@@ -77,15 +76,17 @@ static void start_timer(struct cs5535_mfgpt_timer *timer, uint16_t delta)
 			MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
 }
 
-static void mfgpt_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *evt)
+static int mfgpt_shutdown(struct clock_event_device *evt)
 {
 	disable_timer(cs5535_event_clock);
+	return 0;
+}
 
-	if (mode == CLOCK_EVT_MODE_PERIODIC)
-		start_timer(cs5535_event_clock, MFGPT_PERIODIC);
-
-	cs5535_tick_mode = mode;
+static int mfgpt_set_periodic(struct clock_event_device *evt)
+{
+	disable_timer(cs5535_event_clock);
+	start_timer(cs5535_event_clock, MFGPT_PERIODIC);
+	return 0;
 }
 
 static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
@@ -97,7 +98,10 @@ static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
 static struct clock_event_device cs5535_clockevent = {
 	.name = DRV_NAME,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = mfgpt_set_mode,
+	.set_state_shutdown = mfgpt_shutdown,
+	.set_state_periodic = mfgpt_set_periodic,
+	.set_state_oneshot = mfgpt_shutdown,
+	.tick_resume = mfgpt_shutdown,
 	.set_next_event = mfgpt_next_event,
 	.rating = 250,
 };
@@ -113,7 +117,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 	/* Turn off the clock (and clear the event) */
 	disable_timer(cs5535_event_clock);
 
-	if (cs5535_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
+	if (clockevent_state_shutdown(&cs5535_clockevent))
 		return IRQ_HANDLED;
 
 	/* Clear the counter */
@@ -121,7 +125,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 
 	/* Restart the clock in periodic mode */
 
-	if (cs5535_tick_mode == CLOCK_EVT_MODE_PERIODIC)
+	if (clockevent_state_periodic(&cs5535_clockevent))
 		cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
 				MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
 
-- 
1.9.1

[PATCH 06/74] clockevents/drivers/em_sti: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate em_sti driver to the new 'set-state' interface provided by
the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

NOTE: This also drops a special check:

	if (old_mode == CLOCK_EVT_MODE_ONESHOT)
		em_sti_stop(p, USER_CLOCKEVENT);

as it doesn't look like that important. This driver only supports
ONESHOT and we can only move only to SHUTDOWN from ONESHOT and.
Also on second call (on shutdown), em_sti_stop() would return without
disabling the device again.

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/em_sti.c | 39 ++++++++++++++-------------------------
 1 file changed, 14 insertions(+), 25 deletions(-)

diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
index dc3c6ee..7a97a34 100644
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
@@ -251,33 +251,21 @@ static struct em_sti_priv *ced_to_em_sti(struct clock_event_device *ced)
 	return container_of(ced, struct em_sti_priv, ced);
 }
 
-static void em_sti_clock_event_mode(enum clock_event_mode mode,
-				    struct clock_event_device *ced)
+static int em_sti_clock_event_shutdown(struct clock_event_device *ced)
 {
 	struct em_sti_priv *p = ced_to_em_sti(ced);
+	em_sti_stop(p, USER_CLOCKEVENT);
+	return 0;
+}
 
-	/* deal with old setting first */
-	switch (ced->mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		em_sti_stop(p, USER_CLOCKEVENT);
-		break;
-	default:
-		break;
-	}
+static int em_sti_clock_event_set_oneshot(struct clock_event_device *ced)
+{
+	struct em_sti_priv *p = ced_to_em_sti(ced);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		dev_info(&p->pdev->dev, "used for oneshot clock events\n");
-		em_sti_start(p, USER_CLOCKEVENT);
-		clockevents_config(&p->ced, p->rate);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		em_sti_stop(p, USER_CLOCKEVENT);
-		break;
-	default:
-		break;
-	}
+	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	em_sti_start(p, USER_CLOCKEVENT);
+	clockevents_config(&p->ced, p->rate);
+	return 0;
 }
 
 static int em_sti_clock_event_next(unsigned long delta,
@@ -303,11 +291,12 @@ static void em_sti_register_clockevent(struct em_sti_priv *p)
 	ced->rating = 200;
 	ced->cpumask = cpu_possible_mask;
 	ced->set_next_event = em_sti_clock_event_next;
-	ced->set_mode = em_sti_clock_event_mode;
+	ced->set_state_shutdown = em_sti_clock_event_shutdown;
+	ced->set_state_oneshot = em_sti_clock_event_set_oneshot;
 
 	dev_info(&p->pdev->dev, "used for clock events\n");
 
-	/* Register with dummy 1 Hz value, gets updated in ->set_mode() */
+	/* Register with dummy 1 Hz value, gets updated in ->set_state_oneshot() */
 	clockevents_config_and_register(ced, 1, 2, 0xffffffff);
 }
 
-- 
1.9.1

[PATCH 07/74] clockevents/drivers/Kconfig: Replace USE_OF with OF

[Daniel Lezcano]

From: Antonio Borneo <borneo.antonio@gmail.com>

USE_OF is used as intermediate Kconfig option by few arch's (ARM, MIPS,
Xtensa); in all these cases it implies setting option OF too. Replace the
only instance of USE_OF in clocksource with OF.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 4e57730..c03f04d 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -277,7 +277,7 @@ config CLKSRC_MIPS_GIC
 
 config CLKSRC_PXA
 	def_bool y if ARCH_PXA || ARCH_SA1100
-	select CLKSRC_OF if USE_OF
+	select CLKSRC_OF if OF
 	help
 	  This enables OST0 support available on PXA and SA-11x0
 	  platforms.
-- 
1.9.1

[PATCH 08/74] clockevents/drivers/exynos_mct: Remove unneeded container_of()

[Daniel Lezcano]

From: Alexey Klimov <klimov.linux@gmail.com>

Patch removes unneeded container_of() macro in exynos4_local_timer_setup().
Instead let's pass mevt pointer to setup and stop functions from
exynos4_mct_cpu_notify() and let them get evt pointer.

Tested on odroid-xu3.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clocksource/exynos_mct.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 9064ff7..4d2330a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -442,13 +442,11 @@ static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int exynos4_local_timer_setup(struct clock_event_device *evt)
+static int exynos4_local_timer_setup(struct mct_clock_event_device *mevt)
 {
-	struct mct_clock_event_device *mevt;
+	struct clock_event_device *evt = &mevt->evt;
 	unsigned int cpu = smp_processor_id();
 
-	mevt = container_of(evt, struct mct_clock_event_device, evt);
-
 	mevt->base = EXYNOS4_MCT_L_BASE(cpu);
 	snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
 
@@ -477,8 +475,10 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
 	return 0;
 }
 
-static void exynos4_local_timer_stop(struct clock_event_device *evt)
+static void exynos4_local_timer_stop(struct mct_clock_event_device *mevt)
 {
+	struct clock_event_device *evt = &mevt->evt;
+
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI) {
 		if (evt->irq != -1)
@@ -500,11 +500,11 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self,
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_STARTING:
 		mevt = this_cpu_ptr(&percpu_mct_tick);
-		exynos4_local_timer_setup(&mevt->evt);
+		exynos4_local_timer_setup(mevt);
 		break;
 	case CPU_DYING:
 		mevt = this_cpu_ptr(&percpu_mct_tick);
-		exynos4_local_timer_stop(&mevt->evt);
+		exynos4_local_timer_stop(mevt);
 		break;
 	}
 
@@ -570,7 +570,7 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem
 		goto out_irq;
 
 	/* Immediately configure the timer on the boot CPU */
-	exynos4_local_timer_setup(&mevt->evt);
+	exynos4_local_timer_setup(mevt);
 	return;
 
 out_irq:
-- 
1.9.1

[PATCH 09/74] clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-32-fast platform_device_id entry

[Daniel Lezcano]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since commit 59b89af1d5551c12 ("ARM: shmobile: sh7372: Remove Legacy C
SoC code"), there are no more users left of the "sh-cmt-32-fast"
platform device name. Hence remove the corresponding platform_device_id
entry from the driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/clocksource/sh_cmt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index b8ff3c6..0aa6293 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -929,7 +929,6 @@ static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
 static const struct platform_device_id sh_cmt_id_table[] = {
 	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
 	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
-	{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
 	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
 	{ "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
 	{ }
-- 
1.9.1

[PATCH 10/74] clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48-gen2 platform_device_id entry

[Daniel Lezcano]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since commit 914d7d148411997c ("ARM: shmobile: r8a73a4: Remove legacy
code"), all former users of the "sh-cmt-48-gen2" platform device name
are only supported in generic DT-only ARM multi-platform builds.  The
driver doesn't need to match platform devices by name anymore, hence
remove the corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/clocksource/sh_cmt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 0aa6293..d56d4e0 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -930,7 +930,6 @@ static const struct platform_device_id sh_cmt_id_table[] = {
 	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
 	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
 	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
-	{ "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
 	{ }
 };
 MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
-- 
1.9.1

[PATCH 11/74] clockevents/drivers/asm9260: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate asm9260 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

As a default the timer was stopped when entering in the set_mode(RESUME)
function, now this is done explicitly with the new API.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/asm9260_timer.c | 64 ++++++++++++++++++++++---------------
 1 file changed, 39 insertions(+), 25 deletions(-)

diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
index 4c2ba59..217438d 100644
--- a/drivers/clocksource/asm9260_timer.c
+++ b/drivers/clocksource/asm9260_timer.c
@@ -120,38 +120,52 @@ static int asm9260_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void asm9260_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
+static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
 {
 	/* stop timer0 */
 	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
+}
+
+static int asm9260_timer_shutdown(struct clock_event_device *evt)
+{
+	__asm9260_timer_shutdown(evt);
+	return 0;
+}
+
+static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
+{
+	__asm9260_timer_shutdown(evt);
+
+	/* enable reset and stop on match */
+	writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
+		       priv.base + HW_MCR + SET_REG);
+	return 0;
+}
+
+static int asm9260_timer_set_periodic(struct clock_event_device *evt)
+{
+	__asm9260_timer_shutdown(evt);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* disable reset and stop on match */
-		writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
-				priv.base + HW_MCR + CLR_REG);
-		/* configure match count for TC0 */
-		writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
-		/* enable TC0 */
-		writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* enable reset and stop on match */
-		writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
-				priv.base + HW_MCR + SET_REG);
-		break;
-	default:
-		break;
-	}
+	/* disable reset and stop on match */
+	writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
+		       priv.base + HW_MCR + CLR_REG);
+	/* configure match count for TC0 */
+	writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
+	/* enable TC0 */
+	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
+	return 0;
 }
 
 static struct clock_event_device event_dev = {
-	.name		= DRIVER_NAME,
-	.rating		= 200,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event	= asm9260_timer_set_next_event,
-	.set_mode	= asm9260_timer_set_mode,
+	.name			= DRIVER_NAME,
+	.rating			= 200,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= asm9260_timer_set_next_event,
+	.set_state_shutdown	= asm9260_timer_shutdown,
+	.set_state_periodic	= asm9260_timer_set_periodic,
+	.set_state_oneshot	= asm9260_timer_set_oneshot,
+	.tick_resume		= asm9260_timer_shutdown,
 };
 
 static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 12/74] clockevents/drivers/cadence_ttc: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate cadence_ttc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
---
 drivers/clocksource/cadence_ttc_timer.c | 59 ++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 27 deletions(-)

diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 510c8a1..e47e0e0 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -191,40 +191,42 @@ static int ttc_set_next_event(unsigned long cycles,
 }
 
 /**
- * ttc_set_mode - Sets the mode of timer
+ * ttc_set_{shutdown|oneshot|periodic} - Sets the state of timer
  *
- * @mode:	Mode to be set
  * @evt:	Address of clock event instance
  **/
-static void ttc_set_mode(enum clock_event_mode mode,
-					struct clock_event_device *evt)
+static int ttc_shutdown(struct clock_event_device *evt)
 {
 	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
 	struct ttc_timer *timer = &ttce->ttc;
 	u32 ctrl_reg;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ttc_set_interval(timer, DIV_ROUND_CLOSEST(ttce->ttc.freq,
-						PRESCALE * HZ));
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl_reg = readl_relaxed(timer->base_addr +
-					TTC_CNT_CNTRL_OFFSET);
-		ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
-		writel_relaxed(ctrl_reg,
-				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		ctrl_reg = readl_relaxed(timer->base_addr +
-					TTC_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
-		writel_relaxed(ctrl_reg,
-				timer->base_addr + TTC_CNT_CNTRL_OFFSET);
-		break;
-	}
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK;
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	return 0;
+}
+
+static int ttc_set_periodic(struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+
+	ttc_set_interval(timer,
+			 DIV_ROUND_CLOSEST(ttce->ttc.freq, PRESCALE * HZ));
+	return 0;
+}
+
+static int ttc_resume(struct clock_event_device *evt)
+{
+	struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt);
+	struct ttc_timer *timer = &ttce->ttc;
+	u32 ctrl_reg;
+
+	ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK;
+	writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET);
+	return 0;
 }
 
 static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
@@ -430,7 +432,10 @@ static void __init ttc_setup_clockevent(struct clk *clk,
 	ttcce->ce.name = "ttc_clockevent";
 	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ttcce->ce.set_next_event = ttc_set_next_event;
-	ttcce->ce.set_mode = ttc_set_mode;
+	ttcce->ce.set_state_shutdown = ttc_shutdown;
+	ttcce->ce.set_state_periodic = ttc_set_periodic;
+	ttcce->ce.set_state_oneshot = ttc_shutdown;
+	ttcce->ce.tick_resume = ttc_resume;
 	ttcce->ce.rating = 200;
 	ttcce->ce.irq = irq;
 	ttcce->ce.cpumask = cpu_possible_mask;
-- 
1.9.1

[PATCH 13/74] clockevents/drivers/clps711x: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate clps711x driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/clps711x-timer.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
index d83ec1f..cdd86e3 100644
--- a/drivers/clocksource/clps711x-timer.c
+++ b/drivers/clocksource/clps711x-timer.c
@@ -61,11 +61,6 @@ static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
-					 struct clock_event_device *evt)
-{
-}
-
 static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
 					unsigned int irq)
 {
@@ -91,7 +86,6 @@ static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
 	clkevt->name = "clps711x-clockevent";
 	clkevt->rating = 300;
 	clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
-	clkevt->set_mode = clps711x_clockevent_set_mode;
 	clkevt->cpumask = cpumask_of(0);
 	clockevents_config_and_register(clkevt, HZ, 0, 0);
 
-- 
1.9.1

[PATCH 14/74] clockevents/drivers/dummy_timer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate dummy_timer driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumae <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/dummy_timer.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/clocksource/dummy_timer.c b/drivers/clocksource/dummy_timer.c
index 3199060..776b6c8 100644
--- a/drivers/clocksource/dummy_timer.c
+++ b/drivers/clocksource/dummy_timer.c
@@ -16,15 +16,6 @@
 
 static DEFINE_PER_CPU(struct clock_event_device, dummy_timer_evt);
 
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *evt)
-{
-	/*
-	 * Core clockevents code will call this when exchanging timer devices.
-	 * We don't need to do anything here.
-	 */
-}
-
 static void dummy_timer_setup(void)
 {
 	int cpu = smp_processor_id();
@@ -35,7 +26,6 @@ static void dummy_timer_setup(void)
 			  CLOCK_EVT_FEAT_ONESHOT |
 			  CLOCK_EVT_FEAT_DUMMY;
 	evt->rating	= 100;
-	evt->set_mode	= dummy_timer_set_mode;
 	evt->cpumask	= cpumask_of(cpu);
 
 	clockevents_register_device(evt);
-- 
1.9.1

[PATCH 15/74] clockevents/drivers/dw_apb: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate dw_apb driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/dw_apb_timer.c | 143 +++++++++++++++++++++----------------
 1 file changed, 81 insertions(+), 62 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 35a8809..97ba7cb 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -110,71 +110,87 @@ static void apbt_enable_int(struct dw_apb_timer *timer)
 	apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
 }
 
-static void apbt_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
+static int apbt_shutdown(struct clock_event_device *evt)
 {
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 	unsigned long ctrl;
-	unsigned long period;
+
+	pr_debug("%s CPU %d state=shutdown\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+static int apbt_set_oneshot(struct clock_event_device *evt)
+{
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+	unsigned long ctrl;
 
-	pr_debug("%s CPU %d mode=%d\n", __func__,
-		 cpumask_first(evt->cpumask),
-		 mode);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
-		ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
-		ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-		/*
-		 * DW APB p. 46, have to disable timer before load counter,
-		 * may cause sync problem.
-		 */
-		ctrl &= ~APBTMR_CONTROL_ENABLE;
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-		udelay(1);
-		pr_debug("Setting clock period %lu for HZ %d\n", period, HZ);
-		apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT);
-		ctrl |= APBTMR_CONTROL_ENABLE;
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
-		/*
-		 * set free running mode, this mode will let timer reload max
-		 * timeout which will give time (3min on 25MHz clock) to rearm
-		 * the next event, therefore emulate the one-shot mode.
-		 */
-		ctrl &= ~APBTMR_CONTROL_ENABLE;
-		ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
-
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-		/* write again to set free running mode */
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-
-		/*
-		 * DW APB p. 46, load counter with all 1s before starting free
-		 * running mode.
-		 */
-		apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT);
-		ctrl &= ~APBTMR_CONTROL_INT;
-		ctrl |= APBTMR_CONTROL_ENABLE;
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
-		ctrl &= ~APBTMR_CONTROL_ENABLE;
-		apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		apbt_enable_int(&dw_ced->timer);
-		break;
-	}
+	pr_debug("%s CPU %d state=oneshot\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	/*
+	 * set free running mode, this mode will let timer reload max
+	 * timeout which will give time (3min on 25MHz clock) to rearm
+	 * the next event, therefore emulate the one-shot mode.
+	 */
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;
+
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	/* write again to set free running mode */
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+
+	/*
+	 * DW APB p. 46, load counter with all 1s before starting free
+	 * running mode.
+	 */
+	apbt_writel(&dw_ced->timer, ~0, APBTMR_N_LOAD_COUNT);
+	ctrl &= ~APBTMR_CONTROL_INT;
+	ctrl |= APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+static int apbt_set_periodic(struct clock_event_device *evt)
+{
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+	unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
+	unsigned long ctrl;
+
+	pr_debug("%s CPU %d state=periodic\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl |= APBTMR_CONTROL_MODE_PERIODIC;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	/*
+	 * DW APB p. 46, have to disable timer before load counter,
+	 * may cause sync problem.
+	 */
+	ctrl &= ~APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	udelay(1);
+	pr_debug("Setting clock period %lu for HZ %d\n", period, HZ);
+	apbt_writel(&dw_ced->timer, period, APBTMR_N_LOAD_COUNT);
+	ctrl |= APBTMR_CONTROL_ENABLE;
+	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	return 0;
+}
+
+static int apbt_resume(struct clock_event_device *evt)
+{
+	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
+
+	pr_debug("%s CPU %d state=resume\n", __func__,
+		 cpumask_first(evt->cpumask));
+
+	apbt_enable_int(&dw_ced->timer);
+	return 0;
 }
 
 static int apbt_next_event(unsigned long delta,
@@ -233,7 +249,10 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 	dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 	dw_ced->ced.cpumask = cpumask_of(cpu);
 	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	dw_ced->ced.set_mode = apbt_set_mode;
+	dw_ced->ced.set_state_shutdown = apbt_shutdown;
+	dw_ced->ced.set_state_periodic = apbt_set_periodic;
+	dw_ced->ced.set_state_oneshot = apbt_set_oneshot;
+	dw_ced->ced.tick_resume = apbt_resume;
 	dw_ced->ced.set_next_event = apbt_next_event;
 	dw_ced->ced.irq = dw_ced->timer.irq;
 	dw_ced->ced.rating = rating;
-- 
1.9.1

[PATCH 16/74] clockevents/drivers/fsl_ftm: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate fsl_ftm driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/fsl_ftm_timer.c | 35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c
index 454227d..ef43469 100644
--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -153,19 +153,16 @@ static int ftm_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void ftm_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static int ftm_set_oneshot(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ftm_set_next_event(priv->periodic_cyc, evt);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		ftm_counter_disable(priv->clkevt_base);
-		break;
-	default:
-		return;
-	}
+	ftm_counter_disable(priv->clkevt_base);
+	return 0;
+}
+
+static int ftm_set_periodic(struct clock_event_device *evt)
+{
+	ftm_set_next_event(priv->periodic_cyc, evt);
+	return 0;
 }
 
 static irqreturn_t ftm_evt_interrupt(int irq, void *dev_id)
@@ -174,7 +171,7 @@ static irqreturn_t ftm_evt_interrupt(int irq, void *dev_id)
 
 	ftm_irq_acknowledge(priv->clkevt_base);
 
-	if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT)) {
+	if (likely(clockevent_state_oneshot(evt))) {
 		ftm_irq_disable(priv->clkevt_base);
 		ftm_counter_disable(priv->clkevt_base);
 	}
@@ -185,11 +182,13 @@ static irqreturn_t ftm_evt_interrupt(int irq, void *dev_id)
 }
 
 static struct clock_event_device ftm_clockevent = {
-	.name		= "Freescale ftm timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= ftm_set_mode,
-	.set_next_event	= ftm_set_next_event,
-	.rating		= 300,
+	.name			= "Freescale ftm timer",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_periodic	= ftm_set_periodic,
+	.set_state_oneshot	= ftm_set_oneshot,
+	.set_next_event		= ftm_set_next_event,
+	.rating			= 300,
 };
 
 static struct irqaction ftm_timer_irq = {
-- 
1.9.1

[PATCH 17/74] clockevents/drivers/i8253: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate i8253 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/x86/kernel/i8253.c     |  2 +-
 drivers/clocksource/i8253.c | 77 ++++++++++++++++++++++-----------------------
 2 files changed, 39 insertions(+), 40 deletions(-)

diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index f2b96de..efb82f0 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -34,7 +34,7 @@ static int __init init_pit_clocksource(void)
 	  * - when local APIC timer is active (PIT is switched off)
 	  */
 	if (num_possible_cpus() > 1 || is_hpet_enabled() ||
-	    i8253_clockevent.mode != CLOCK_EVT_MODE_PERIODIC)
+	    !clockevent_state_periodic(&i8253_clockevent))
 		return 0;
 
 	return clocksource_i8253_init();
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 14ee3ef..0efd36e 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -100,44 +100,40 @@ int __init clocksource_i8253_init(void)
 #endif
 
 #ifdef CONFIG_CLKEVT_I8253
-/*
- * Initialize the PIT timer.
- *
- * This is also called after resume to bring the PIT into operation again.
- */
-static void init_pit_timer(enum clock_event_mode mode,
-			   struct clock_event_device *evt)
+static int pit_shutdown(struct clock_event_device *evt)
 {
+	if (!clockevent_state_oneshot(evt) && !clockevent_state_periodic(evt))
+		return 0;
+
 	raw_spin_lock(&i8253_lock);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* binary, mode 2, LSB/MSB, ch 0 */
-		outb_p(0x34, PIT_MODE);
-		outb_p(PIT_LATCH & 0xff , PIT_CH0);	/* LSB */
-		outb_p(PIT_LATCH >> 8 , PIT_CH0);		/* MSB */
-		break;
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
-		    evt->mode == CLOCK_EVT_MODE_ONESHOT) {
-			outb_p(0x30, PIT_MODE);
-			outb_p(0, PIT_CH0);
-			outb_p(0, PIT_CH0);
-		}
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* One shot setup */
-		outb_p(0x38, PIT_MODE);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		/* Nothing to do here */
-		break;
-	}
+	outb_p(0x30, PIT_MODE);
+	outb_p(0, PIT_CH0);
+	outb_p(0, PIT_CH0);
+
+	raw_spin_unlock(&i8253_lock);
+	return 0;
+}
+
+static int pit_set_oneshot(struct clock_event_device *evt)
+{
+	raw_spin_lock(&i8253_lock);
+	outb_p(0x38, PIT_MODE);
+	raw_spin_unlock(&i8253_lock);
+	return 0;
+}
+
+static int pit_set_periodic(struct clock_event_device *evt)
+{
+	raw_spin_lock(&i8253_lock);
+
+	/* binary, mode 2, LSB/MSB, ch 0 */
+	outb_p(0x34, PIT_MODE);
+	outb_p(PIT_LATCH & 0xff, PIT_CH0);	/* LSB */
+	outb_p(PIT_LATCH >> 8, PIT_CH0);	/* MSB */
+
 	raw_spin_unlock(&i8253_lock);
+	return 0;
 }
 
 /*
@@ -160,10 +156,11 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  * it can be solely used for the global tick.
  */
 struct clock_event_device i8253_clockevent = {
-	.name		= "pit",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_mode	= init_pit_timer,
-	.set_next_event = pit_next_event,
+	.name			= "pit",
+	.features		= CLOCK_EVT_FEAT_PERIODIC,
+	.set_state_shutdown	= pit_shutdown,
+	.set_state_periodic	= pit_set_periodic,
+	.set_next_event		= pit_next_event,
 };
 
 /*
@@ -172,8 +169,10 @@ struct clock_event_device i8253_clockevent = {
  */
 void __init clockevent_i8253_init(bool oneshot)
 {
-	if (oneshot)
+	if (oneshot) {
 		i8253_clockevent.features |= CLOCK_EVT_FEAT_ONESHOT;
+		i8253_clockevent.set_state_oneshot = pit_set_oneshot;
+	}
 	/*
 	 * Start pit with the boot cpu mask. x86 might make it global
 	 * when it is used as broadcast device later.
-- 
1.9.1

[PATCH 18/74] clockevents/drivers/meson6: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate meson6 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Carlo Caione <carlo@caione.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Carlo Caione <carlo@caione.org>
---
 drivers/clocksource/meson6_timer.c | 50 ++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/meson6_timer.c b/drivers/clocksource/meson6_timer.c
index 5c15cba..1fa22c4 100644
--- a/drivers/clocksource/meson6_timer.c
+++ b/drivers/clocksource/meson6_timer.c
@@ -67,25 +67,25 @@ static void meson6_clkevt_time_start(unsigned char timer, bool periodic)
 	writel(val | TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
 }
 
-static void meson6_clkevt_mode(enum clock_event_mode mode,
-			       struct clock_event_device *clk)
+static int meson6_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		meson6_clkevt_time_stop(CED_ID);
-		meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC/HZ - 1);
-		meson6_clkevt_time_start(CED_ID, true);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		meson6_clkevt_time_stop(CED_ID);
-		meson6_clkevt_time_start(CED_ID, false);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		meson6_clkevt_time_stop(CED_ID);
-		break;
-	}
+	meson6_clkevt_time_stop(CED_ID);
+	return 0;
+}
+
+static int meson6_set_oneshot(struct clock_event_device *evt)
+{
+	meson6_clkevt_time_stop(CED_ID);
+	meson6_clkevt_time_start(CED_ID, false);
+	return 0;
+}
+
+static int meson6_set_periodic(struct clock_event_device *evt)
+{
+	meson6_clkevt_time_stop(CED_ID);
+	meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC / HZ - 1);
+	meson6_clkevt_time_start(CED_ID, true);
+	return 0;
 }
 
 static int meson6_clkevt_next_event(unsigned long evt,
@@ -99,11 +99,15 @@ static int meson6_clkevt_next_event(unsigned long evt,
 }
 
 static struct clock_event_device meson6_clockevent = {
-	.name		= "meson6_tick",
-	.rating		= 400,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= meson6_clkevt_mode,
-	.set_next_event	= meson6_clkevt_next_event,
+	.name			= "meson6_tick",
+	.rating			= 400,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= meson6_shutdown,
+	.set_state_periodic	= meson6_set_periodic,
+	.set_state_oneshot	= meson6_set_oneshot,
+	.tick_resume		= meson6_shutdown,
+	.set_next_event		= meson6_clkevt_next_event,
 };
 
 static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 19/74] clockevents/drivers/metag_generic: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate metag_generic driver to the new 'set-state' interface provided
by clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. Even the WARN()
for periodic or unused modes isn't required anymore as the core is
taking care of that now. So, this patch doesn't provide any set-state
callbacks.

Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/metag_generic.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/clocksource/metag_generic.c b/drivers/clocksource/metag_generic.c
index b7384b8..bcd5c0d 100644
--- a/drivers/clocksource/metag_generic.c
+++ b/drivers/clocksource/metag_generic.c
@@ -56,25 +56,6 @@ static int metag_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void metag_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* We should disable the IRQ here */
-		break;
-
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_UNUSED:
-		WARN_ON(1);
-		break;
-	};
-}
-
 static cycle_t metag_clocksource_read(struct clocksource *cs)
 {
 	return __core_reg_get(TXTIMER);
@@ -129,7 +110,6 @@ static void arch_timer_setup(unsigned int cpu)
 	clk->rating = 200,
 	clk->shift = 12,
 	clk->irq = tbisig_map(TBID_SIGNUM_TRT),
-	clk->set_mode = metag_timer_set_mode,
 	clk->set_next_event = metag_timer_set_next_event,
 
 	clk->mult = div_sc(hwtimer_freq, NSEC_PER_SEC, clk->shift);
-- 
1.9.1

[PATCH 20/74] clockevents/drivers/mips-gic: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate mips-gic driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/mips-gic-timer.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index b81ed1a..c3810b6 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -33,12 +33,6 @@ static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
 	return res;
 }
 
-static void gic_set_clock_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	/* Nothing to do ...  */
-}
-
 static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *cd = dev_id;
@@ -67,7 +61,6 @@ static void gic_clockevent_cpu_init(struct clock_event_device *cd)
 	cd->irq			= gic_timer_irq;
 	cd->cpumask		= cpumask_of(cpu);
 	cd->set_next_event	= gic_next_event;
-	cd->set_mode		= gic_set_clock_mode;
 
 	clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
 
-- 
1.9.1

[PATCH 21/74] clockevents/drivers/moxart: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate moxart driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/moxart_timer.c | 49 ++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
index 5eb2c35..19857af 100644
--- a/drivers/clocksource/moxart_timer.c
+++ b/drivers/clocksource/moxart_timer.c
@@ -58,25 +58,24 @@
 static void __iomem *base;
 static unsigned int clock_count_per_tick;
 
-static void moxart_clkevt_mode(enum clock_event_mode mode,
-			       struct clock_event_device *clk)
+static int moxart_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel(TIMER1_DISABLE, base + TIMER_CR);
-		writel(~0, base + TIMER1_BASE + REG_LOAD);
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD);
-		writel(TIMER1_ENABLE, base + TIMER_CR);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		writel(TIMER1_DISABLE, base + TIMER_CR);
-		break;
-	}
+	writel(TIMER1_DISABLE, base + TIMER_CR);
+	return 0;
+}
+
+static int moxart_set_oneshot(struct clock_event_device *evt)
+{
+	writel(TIMER1_DISABLE, base + TIMER_CR);
+	writel(~0, base + TIMER1_BASE + REG_LOAD);
+	return 0;
+}
+
+static int moxart_set_periodic(struct clock_event_device *evt)
+{
+	writel(clock_count_per_tick, base + TIMER1_BASE + REG_LOAD);
+	writel(TIMER1_ENABLE, base + TIMER_CR);
+	return 0;
 }
 
 static int moxart_clkevt_next_event(unsigned long cycles,
@@ -95,11 +94,15 @@ static int moxart_clkevt_next_event(unsigned long cycles,
 }
 
 static struct clock_event_device moxart_clockevent = {
-	.name		= "moxart_timer",
-	.rating		= 200,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= moxart_clkevt_mode,
-	.set_next_event	= moxart_clkevt_next_event,
+	.name			= "moxart_timer",
+	.rating			= 200,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= moxart_shutdown,
+	.set_state_periodic	= moxart_set_periodic,
+	.set_state_oneshot	= moxart_set_oneshot,
+	.tick_resume		= moxart_set_oneshot,
+	.set_next_event		= moxart_clkevt_next_event,
 };
 
 static irqreturn_t moxart_timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 22/74] clockevents/drivers/mtk: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate mtk driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/mtk_timer.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/clocksource/mtk_timer.c b/drivers/clocksource/mtk_timer.c
index 68ab423..50f0641 100644
--- a/drivers/clocksource/mtk_timer.c
+++ b/drivers/clocksource/mtk_timer.c
@@ -102,27 +102,20 @@ static void mtk_clkevt_time_start(struct mtk_clock_event_device *evt,
 	       evt->gpt_base + TIMER_CTRL_REG(timer));
 }
 
-static void mtk_clkevt_mode(enum clock_event_mode mode,
-				struct clock_event_device *clk)
+static int mtk_clkevt_shutdown(struct clock_event_device *clk)
+{
+	mtk_clkevt_time_stop(to_mtk_clk(clk), GPT_CLK_EVT);
+	return 0;
+}
+
+static int mtk_clkevt_set_periodic(struct clock_event_device *clk)
 {
 	struct mtk_clock_event_device *evt = to_mtk_clk(clk);
 
 	mtk_clkevt_time_stop(evt, GPT_CLK_EVT);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		mtk_clkevt_time_setup(evt, evt->ticks_per_jiffy, GPT_CLK_EVT);
-		mtk_clkevt_time_start(evt, true, GPT_CLK_EVT);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Timer is enabled in set_next_event */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		/* No more interrupts will occur as source is disabled */
-		break;
-	}
+	mtk_clkevt_time_setup(evt, evt->ticks_per_jiffy, GPT_CLK_EVT);
+	mtk_clkevt_time_start(evt, true, GPT_CLK_EVT);
+	return 0;
 }
 
 static int mtk_clkevt_next_event(unsigned long event,
@@ -196,7 +189,10 @@ static void __init mtk_timer_init(struct device_node *node)
 	evt->dev.name = "mtk_tick";
 	evt->dev.rating = 300;
 	evt->dev.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	evt->dev.set_mode = mtk_clkevt_mode;
+	evt->dev.set_state_shutdown = mtk_clkevt_shutdown;
+	evt->dev.set_state_periodic = mtk_clkevt_set_periodic;
+	evt->dev.set_state_oneshot = mtk_clkevt_shutdown;
+	evt->dev.tick_resume = mtk_clkevt_shutdown;
 	evt->dev.set_next_event = mtk_clkevt_next_event;
 	evt->dev.cpumask = cpu_possible_mask;
 
-- 
1.9.1

[PATCH 23/74] clockevents/drivers/mxs: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate mxs driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also drop:
- 'mxs_clockevent_mode': as we have helpers available from core for the
  same.
  same state twice and so perhaps the check wasn't required.
- 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore
  by drivers and it was used just to print old-state:new-state. The
  debug prints are called from mxs_irq_clear() now based on the
  state-name passed to it. The printed name will be same for shutdown
  and resume states as they use the same callback pointer.

Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/mxs_timer.c | 80 +++++++++++++++++------------------------
 1 file changed, 32 insertions(+), 48 deletions(-)

diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
index 445b68a..f5ce296 100644
--- a/drivers/clocksource/mxs_timer.c
+++ b/drivers/clocksource/mxs_timer.c
@@ -77,7 +77,6 @@
 #define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS	0xf
 
 static struct clock_event_device mxs_clockevent_device;
-static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
 static void __iomem *mxs_timrot_base;
 static u32 timrot_major_version;
@@ -141,64 +140,49 @@ static struct irqaction mxs_timer_irq = {
 	.handler	= mxs_timer_interrupt,
 };
 
-#ifdef DEBUG
-static const char *clock_event_mode_label[] const = {
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /* DEBUG */
-
-static void mxs_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static void mxs_irq_clear(char *state)
 {
 	/* Disable interrupt in timer module */
 	timrot_irq_disable();
 
-	if (mode != mxs_clockevent_mode) {
-		/* Set event time into the furthest future */
-		if (timrot_is_v1())
-			__raw_writel(0xffff,
-				mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
-		else
-			__raw_writel(0xffffffff,
-				mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
-		/* Clear pending interrupt */
-		timrot_irq_acknowledge();
-	}
+	/* Set event time into the furthest future */
+	if (timrot_is_v1())
+		__raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+	else
+		__raw_writel(0xffffffff,
+			     mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+	/* Clear pending interrupt */
+	timrot_irq_acknowledge();
 
 #ifdef DEBUG
-	pr_info("%s: changing mode from %s to %s\n", __func__,
-		clock_event_mode_label[mxs_clockevent_mode],
-		clock_event_mode_label[mode]);
+	pr_info("%s: changing mode to %s\n", __func__, state)
 #endif /* DEBUG */
+}
 
-	/* Remember timer mode */
-	mxs_clockevent_mode = mode;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pr_err("%s: Periodic mode is not implemented\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		timrot_irq_enable();
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
+static int mxs_shutdown(struct clock_event_device *evt)
+{
+	mxs_irq_clear("shutdown");
+
+	return 0;
+}
+
+static int mxs_set_oneshot(struct clock_event_device *evt)
+{
+	if (clockevent_state_oneshot(evt))
+		mxs_irq_clear("oneshot");
+	timrot_irq_enable();
+	return 0;
 }
 
 static struct clock_event_device mxs_clockevent_device = {
-	.name		= "mxs_timrot",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= mxs_set_mode,
-	.set_next_event	= timrotv2_set_next_event,
-	.rating		= 200,
+	.name			= "mxs_timrot",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= mxs_shutdown,
+	.set_state_oneshot	= mxs_set_oneshot,
+	.tick_resume		= mxs_shutdown,
+	.set_next_event		= timrotv2_set_next_event,
+	.rating			= 200,
 };
 
 static int __init mxs_clockevent_init(struct clk *timer_clk)
-- 
1.9.1

[PATCH 24/74] clockevents/drivers/nomadik-mtu: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate nomadik-mtu driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/clocksource/nomadik-mtu.c | 58 ++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 28 deletions(-)

diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index a709cfa..bc8dd44 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -119,28 +119,27 @@ static void nmdk_clkevt_reset(void)
 	}
 }
 
-static void nmdk_clkevt_mode(enum clock_event_mode mode,
-			     struct clock_event_device *dev)
+static int nmdk_clkevt_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		clkevt_periodic = true;
-		nmdk_clkevt_reset();
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		clkevt_periodic = false;
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		writel(0, mtu_base + MTU_IMSC);
-		/* disable timer */
-		writel(0, mtu_base + MTU_CR(1));
-		/* load some high default value */
-		writel(0xffffffff, mtu_base + MTU_LR(1));
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	writel(0, mtu_base + MTU_IMSC);
+	/* disable timer */
+	writel(0, mtu_base + MTU_CR(1));
+	/* load some high default value */
+	writel(0xffffffff, mtu_base + MTU_LR(1));
+	return 0;
+}
+
+static int nmdk_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+	clkevt_periodic = false;
+	return 0;
+}
+
+static int nmdk_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	clkevt_periodic = true;
+	nmdk_clkevt_reset();
+	return 0;
 }
 
 static void nmdk_clksrc_reset(void)
@@ -163,13 +162,16 @@ static void nmdk_clkevt_resume(struct clock_event_device *cedev)
 }
 
 static struct clock_event_device nmdk_clkevt = {
-	.name		= "mtu_1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC |
-	                  CLOCK_EVT_FEAT_DYNIRQ,
-	.rating		= 200,
-	.set_mode	= nmdk_clkevt_mode,
-	.set_next_event	= nmdk_clkevt_next,
-	.resume		= nmdk_clkevt_resume,
+	.name			= "mtu_1",
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DYNIRQ,
+	.rating			= 200,
+	.set_state_shutdown	= nmdk_clkevt_shutdown,
+	.set_state_periodic	= nmdk_clkevt_set_periodic,
+	.set_state_oneshot	= nmdk_clkevt_set_oneshot,
+	.set_next_event		= nmdk_clkevt_next,
+	.resume			= nmdk_clkevt_resume,
 };
 
 /*
-- 
1.9.1

[PATCH 25/74] clockevents/drivers/pxa: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate pxa driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Both oneshot and shutdown modes had exactly same code and so only a
single callback is sufficient now, which will be called for both the
modes.

Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/clocksource/pxa_timer.c | 39 +++++++++++++--------------------------
 1 file changed, 13 insertions(+), 26 deletions(-)

diff --git a/drivers/clocksource/pxa_timer.c b/drivers/clocksource/pxa_timer.c
index d9438af..45b6a49 100644
--- a/drivers/clocksource/pxa_timer.c
+++ b/drivers/clocksource/pxa_timer.c
@@ -88,26 +88,12 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
 
-static void
-pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static int pxa_osmr0_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
-		timer_writel(OSSR_M0, OSSR);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* initializing, released, or preparing for suspend */
-		timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
-		timer_writel(OSSR_M0, OSSR);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
+	/* initializing, released, or preparing for suspend */
+	timer_writel(timer_readl(OIER) & ~OIER_E0, OIER);
+	timer_writel(OSSR_M0, OSSR);
+	return 0;
 }
 
 #ifdef CONFIG_PM
@@ -147,13 +133,14 @@ static void pxa_timer_resume(struct clock_event_device *cedev)
 #endif
 
 static struct clock_event_device ckevt_pxa_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= pxa_osmr0_set_next_event,
-	.set_mode	= pxa_osmr0_set_mode,
-	.suspend	= pxa_timer_suspend,
-	.resume		= pxa_timer_resume,
+	.name			= "osmr0",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= pxa_osmr0_set_next_event,
+	.set_state_shutdown	= pxa_osmr0_shutdown,
+	.set_state_oneshot	= pxa_osmr0_shutdown,
+	.suspend		= pxa_timer_suspend,
+	.resume			= pxa_timer_resume,
 };
 
 static struct irqaction pxa_ost0_irq = {
-- 
1.9.1

[PATCH 26/74] clockevents/drivers/qcom: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate qcom driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Periodic mode isn't supported by the driver and so the callback isn't
provided anymore.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clocksource/qcom-timer.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
index cba2d01..f8e09f9 100644
--- a/drivers/clocksource/qcom-timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -47,7 +47,7 @@ static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = dev_id;
 	/* Stop the timer tick */
-	if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
+	if (clockevent_state_oneshot(evt)) {
 		u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 		ctrl &= ~TIMER_ENABLE_EN;
 		writel_relaxed(ctrl, event_base + TIMER_ENABLE);
@@ -75,26 +75,14 @@ static int msm_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void msm_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
+static int msm_timer_shutdown(struct clock_event_device *evt)
 {
 	u32 ctrl;
 
 	ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 	ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Timer is enabled in set_next_event */
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		break;
-	}
 	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+	return 0;
 }
 
 static struct clock_event_device __percpu *msm_evt;
@@ -126,7 +114,9 @@ static int msm_local_timer_setup(struct clock_event_device *evt)
 	evt->name = "msm_timer";
 	evt->features = CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 200;
-	evt->set_mode = msm_timer_set_mode;
+	evt->set_state_shutdown = msm_timer_shutdown;
+	evt->set_state_oneshot = msm_timer_shutdown;
+	evt->tick_resume = msm_timer_shutdown;
 	evt->set_next_event = msm_timer_set_next_event;
 	evt->cpumask = cpumask_of(cpu);
 
@@ -147,7 +137,7 @@ static int msm_local_timer_setup(struct clock_event_device *evt)
 
 static void msm_local_timer_stop(struct clock_event_device *evt)
 {
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	evt->set_state_shutdown(evt);
 	disable_percpu_irq(evt->irq);
 }
 
-- 
1.9.1

[PATCH 27/74] clockevents/drivers/rockchip: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate rockchip driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything for oneshot or resume modes, and so the
callbacks aren't provided.

Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/rockchip_timer.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/clocksource/rockchip_timer.c b/drivers/clocksource/rockchip_timer.c
index a35993b..bb2c2b0 100644
--- a/drivers/clocksource/rockchip_timer.c
+++ b/drivers/clocksource/rockchip_timer.c
@@ -82,23 +82,18 @@ static inline int rk_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static inline void rk_timer_set_mode(enum clock_event_mode mode,
-				     struct clock_event_device *ce)
+static int rk_timer_shutdown(struct clock_event_device *ce)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		rk_timer_disable(ce);
-		rk_timer_update_counter(rk_timer(ce)->freq / HZ - 1, ce);
-		rk_timer_enable(ce, TIMER_MODE_FREE_RUNNING);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		rk_timer_disable(ce);
-		break;
-	}
+	rk_timer_disable(ce);
+	return 0;
+}
+
+static int rk_timer_set_periodic(struct clock_event_device *ce)
+{
+	rk_timer_disable(ce);
+	rk_timer_update_counter(rk_timer(ce)->freq / HZ - 1, ce);
+	rk_timer_enable(ce, TIMER_MODE_FREE_RUNNING);
+	return 0;
 }
 
 static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
@@ -107,7 +102,7 @@ static irqreturn_t rk_timer_interrupt(int irq, void *dev_id)
 
 	rk_timer_interrupt_clear(ce);
 
-	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(ce))
 		rk_timer_disable(ce);
 
 	ce->event_handler(ce);
@@ -161,7 +156,8 @@ static void __init rk_timer_init(struct device_node *np)
 	ce->name = TIMER_NAME;
 	ce->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ce->set_next_event = rk_timer_set_next_event;
-	ce->set_mode = rk_timer_set_mode;
+	ce->set_state_shutdown = rk_timer_shutdown;
+	ce->set_state_periodic = rk_timer_set_periodic;
 	ce->irq = irq;
 	ce->cpumask = cpumask_of(0);
 	ce->rating = 250;
-- 
1.9.1

[PATCH 28/74] clockevents/drivers/samsung_pwm: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate samsung_pwm driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/samsung_pwm_timer.c | 41 +++++++++++++++------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
index 5645cfc..bc90e13 100644
--- a/drivers/clocksource/samsung_pwm_timer.c
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -207,25 +207,18 @@ static int samsung_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void samsung_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static int samsung_shutdown(struct clock_event_device *evt)
 {
 	samsung_time_stop(pwm.event_id);
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		samsung_time_setup(pwm.event_id, pwm.clock_count_per_tick - 1);
-		samsung_time_start(pwm.event_id, true);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+static int samsung_set_periodic(struct clock_event_device *evt)
+{
+	samsung_time_stop(pwm.event_id);
+	samsung_time_setup(pwm.event_id, pwm.clock_count_per_tick - 1);
+	samsung_time_start(pwm.event_id, true);
+	return 0;
 }
 
 static void samsung_clockevent_resume(struct clock_event_device *cev)
@@ -240,12 +233,16 @@ static void samsung_clockevent_resume(struct clock_event_device *cev)
 }
 
 static struct clock_event_device time_event_device = {
-	.name		= "samsung_event_timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= samsung_set_next_event,
-	.set_mode	= samsung_set_mode,
-	.resume		= samsung_clockevent_resume,
+	.name			= "samsung_event_timer",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= samsung_set_next_event,
+	.set_state_shutdown	= samsung_shutdown,
+	.set_state_periodic	= samsung_set_periodic,
+	.set_state_oneshot	= samsung_shutdown,
+	.tick_resume		= samsung_shutdown,
+	.resume			= samsung_clockevent_resume,
 };
 
 static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
-- 
1.9.1

[PATCH 29/74] clockevents/drivers/sh_cmt: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sh_cmt driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/clocksource/sh_cmt.c | 62 ++++++++++++++++++++++----------------------
 1 file changed, 31 insertions(+), 31 deletions(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index d56d4e0..e903026 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -538,7 +538,7 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
 
 	if (ch->flags & FLAG_CLOCKEVENT) {
 		if (!(ch->flags & FLAG_SKIPEVENT)) {
-			if (ch->ced.mode == CLOCK_EVT_MODE_ONESHOT) {
+			if (clockevent_state_oneshot(&ch->ced)) {
 				ch->next_match_value = ch->max_match_value;
 				ch->flags |= FLAG_REPROGRAM;
 			}
@@ -554,7 +554,7 @@ static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
 		sh_cmt_clock_event_program_verify(ch, 1);
 
 		if (ch->flags & FLAG_CLOCKEVENT)
-			if ((ch->ced.mode == CLOCK_EVT_MODE_SHUTDOWN)
+			if ((clockevent_state_shutdown(&ch->ced))
 			    || (ch->match_value == ch->next_match_value))
 				ch->flags &= ~FLAG_REPROGRAM;
 	}
@@ -720,39 +720,37 @@ static void sh_cmt_clock_event_start(struct sh_cmt_channel *ch, int periodic)
 		sh_cmt_set_next(ch, ch->max_match_value);
 }
 
-static void sh_cmt_clock_event_mode(enum clock_event_mode mode,
-				    struct clock_event_device *ced)
+static int sh_cmt_clock_event_shutdown(struct clock_event_device *ced)
+{
+	struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
+
+	sh_cmt_stop(ch, FLAG_CLOCKEVENT);
+	return 0;
+}
+
+static int sh_cmt_clock_event_set_state(struct clock_event_device *ced,
+					int periodic)
 {
 	struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
 
 	/* deal with old setting first */
-	switch (ced->mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_ONESHOT:
+	if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
 		sh_cmt_stop(ch, FLAG_CLOCKEVENT);
-		break;
-	default:
-		break;
-	}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		dev_info(&ch->cmt->pdev->dev,
-			 "ch%u: used for periodic clock events\n", ch->index);
-		sh_cmt_clock_event_start(ch, 1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		dev_info(&ch->cmt->pdev->dev,
-			 "ch%u: used for oneshot clock events\n", ch->index);
-		sh_cmt_clock_event_start(ch, 0);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		sh_cmt_stop(ch, FLAG_CLOCKEVENT);
-		break;
-	default:
-		break;
-	}
+	dev_info(&ch->cmt->pdev->dev, "ch%u: used for %s clock events\n",
+		 ch->index, periodic ? "periodic" : "oneshot");
+	sh_cmt_clock_event_start(ch, periodic);
+	return 0;
+}
+
+static int sh_cmt_clock_event_set_oneshot(struct clock_event_device *ced)
+{
+	return sh_cmt_clock_event_set_state(ced, 0);
+}
+
+static int sh_cmt_clock_event_set_periodic(struct clock_event_device *ced)
+{
+	return sh_cmt_clock_event_set_state(ced, 1);
 }
 
 static int sh_cmt_clock_event_next(unsigned long delta,
@@ -760,7 +758,7 @@ static int sh_cmt_clock_event_next(unsigned long delta,
 {
 	struct sh_cmt_channel *ch = ced_to_sh_cmt(ced);
 
-	BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+	BUG_ON(!clockevent_state_oneshot(ced));
 	if (likely(ch->flags & FLAG_IRQCONTEXT))
 		ch->next_match_value = delta - 1;
 	else
@@ -814,7 +812,9 @@ static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch,
 	ced->rating = 125;
 	ced->cpumask = cpu_possible_mask;
 	ced->set_next_event = sh_cmt_clock_event_next;
-	ced->set_mode = sh_cmt_clock_event_mode;
+	ced->set_state_shutdown = sh_cmt_clock_event_shutdown;
+	ced->set_state_periodic = sh_cmt_clock_event_set_periodic;
+	ced->set_state_oneshot = sh_cmt_clock_event_set_oneshot;
 	ced->suspend = sh_cmt_clock_event_suspend;
 	ced->resume = sh_cmt_clock_event_resume;
 
-- 
1.9.1

[PATCH 30/74] clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sh_mtu2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/clocksource/sh_mtu2.c | 42 ++++++++++++++++--------------------------
 1 file changed, 16 insertions(+), 26 deletions(-)

diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 3d88698..f1985da 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -276,36 +276,25 @@ static struct sh_mtu2_channel *ced_to_sh_mtu2(struct clock_event_device *ced)
 	return container_of(ced, struct sh_mtu2_channel, ced);
 }
 
-static void sh_mtu2_clock_event_mode(enum clock_event_mode mode,
-				    struct clock_event_device *ced)
+static int sh_mtu2_clock_event_shutdown(struct clock_event_device *ced)
 {
 	struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
-	int disabled = 0;
 
-	/* deal with old setting first */
-	switch (ced->mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
+	sh_mtu2_disable(ch);
+	return 0;
+}
+
+static int sh_mtu2_clock_event_set_periodic(struct clock_event_device *ced)
+{
+	struct sh_mtu2_channel *ch = ced_to_sh_mtu2(ced);
+
+	if (clockevent_state_periodic(ced))
 		sh_mtu2_disable(ch);
-		disabled = 1;
-		break;
-	default:
-		break;
-	}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		dev_info(&ch->mtu->pdev->dev,
-			 "ch%u: used for periodic clock events\n", ch->index);
-		sh_mtu2_enable(ch);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-		if (!disabled)
-			sh_mtu2_disable(ch);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		break;
-	}
+	dev_info(&ch->mtu->pdev->dev, "ch%u: used for periodic clock events\n",
+		 ch->index);
+	sh_mtu2_enable(ch);
+	return 0;
 }
 
 static void sh_mtu2_clock_event_suspend(struct clock_event_device *ced)
@@ -327,7 +316,8 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch,
 	ced->features = CLOCK_EVT_FEAT_PERIODIC;
 	ced->rating = 200;
 	ced->cpumask = cpu_possible_mask;
-	ced->set_mode = sh_mtu2_clock_event_mode;
+	ced->set_state_shutdown = sh_mtu2_clock_event_shutdown;
+	ced->set_state_periodic = sh_mtu2_clock_event_set_periodic;
 	ced->suspend = sh_mtu2_clock_event_suspend;
 	ced->resume = sh_mtu2_clock_event_resume;
 
-- 
1.9.1

[PATCH 31/74] clockevents/drivers/sh_tmu: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sh_tmu driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/clocksource/sh_tmu.c | 63 +++++++++++++++++++++-----------------------
 1 file changed, 30 insertions(+), 33 deletions(-)

diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index b6b8fa3..43c9814 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -240,7 +240,7 @@ static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id)
 	struct sh_tmu_channel *ch = dev_id;
 
 	/* disable or acknowledge interrupt */
-	if (ch->ced.mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(&ch->ced))
 		sh_tmu_write(ch, TCR, TCR_TPSC_CLK4);
 	else
 		sh_tmu_write(ch, TCR, TCR_UNIE | TCR_TPSC_CLK4);
@@ -358,42 +358,37 @@ static void sh_tmu_clock_event_start(struct sh_tmu_channel *ch, int periodic)
 	}
 }
 
-static void sh_tmu_clock_event_mode(enum clock_event_mode mode,
-				    struct clock_event_device *ced)
+static int sh_tmu_clock_event_shutdown(struct clock_event_device *ced)
+{
+	struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
+
+	sh_tmu_disable(ch);
+	return 0;
+}
+
+static int sh_tmu_clock_event_set_state(struct clock_event_device *ced,
+					int periodic)
 {
 	struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
-	int disabled = 0;
 
 	/* deal with old setting first */
-	switch (ced->mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_ONESHOT:
+	if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
 		sh_tmu_disable(ch);
-		disabled = 1;
-		break;
-	default:
-		break;
-	}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		dev_info(&ch->tmu->pdev->dev,
-			 "ch%u: used for periodic clock events\n", ch->index);
-		sh_tmu_clock_event_start(ch, 1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		dev_info(&ch->tmu->pdev->dev,
-			 "ch%u: used for oneshot clock events\n", ch->index);
-		sh_tmu_clock_event_start(ch, 0);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-		if (!disabled)
-			sh_tmu_disable(ch);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		break;
-	}
+	dev_info(&ch->tmu->pdev->dev, "ch%u: used for %s clock events\n",
+		 ch->index, periodic ? "periodic" : "oneshot");
+	sh_tmu_clock_event_start(ch, periodic);
+	return 0;
+}
+
+static int sh_tmu_clock_event_set_oneshot(struct clock_event_device *ced)
+{
+	return sh_tmu_clock_event_set_state(ced, 0);
+}
+
+static int sh_tmu_clock_event_set_periodic(struct clock_event_device *ced)
+{
+	return sh_tmu_clock_event_set_state(ced, 1);
 }
 
 static int sh_tmu_clock_event_next(unsigned long delta,
@@ -401,7 +396,7 @@ static int sh_tmu_clock_event_next(unsigned long delta,
 {
 	struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
 
-	BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+	BUG_ON(!clockevent_state_oneshot(ced));
 
 	/* program new delta value */
 	sh_tmu_set_next(ch, delta, 0);
@@ -430,7 +425,9 @@ static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
 	ced->rating = 200;
 	ced->cpumask = cpu_possible_mask;
 	ced->set_next_event = sh_tmu_clock_event_next;
-	ced->set_mode = sh_tmu_clock_event_mode;
+	ced->set_state_shutdown = sh_tmu_clock_event_shutdown;
+	ced->set_state_periodic = sh_tmu_clock_event_set_periodic;
+	ced->set_state_oneshot = sh_tmu_clock_event_set_oneshot;
 	ced->suspend = sh_tmu_clock_event_suspend;
 	ced->resume = sh_tmu_clock_event_resume;
 
-- 
1.9.1

[PATCH 32/74] clockevents/drivers/sun4i: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sun4i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clocksource/sun4i_timer.c | 41 +++++++++++++++++++++------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 1928a89..6f3719d 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -81,25 +81,25 @@ static void sun4i_clkevt_time_start(u8 timer, bool periodic)
 	       timer_base + TIMER_CTL_REG(timer));
 }
 
-static void sun4i_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *clk)
+static int sun4i_clkevt_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		sun4i_clkevt_time_stop(0);
-		sun4i_clkevt_time_setup(0, ticks_per_jiffy);
-		sun4i_clkevt_time_start(0, true);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		sun4i_clkevt_time_stop(0);
-		sun4i_clkevt_time_start(0, false);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		sun4i_clkevt_time_stop(0);
-		break;
-	}
+	sun4i_clkevt_time_stop(0);
+	return 0;
+}
+
+static int sun4i_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+	sun4i_clkevt_time_stop(0);
+	sun4i_clkevt_time_start(0, false);
+	return 0;
+}
+
+static int sun4i_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	sun4i_clkevt_time_stop(0);
+	sun4i_clkevt_time_setup(0, ticks_per_jiffy);
+	sun4i_clkevt_time_start(0, true);
+	return 0;
 }
 
 static int sun4i_clkevt_next_event(unsigned long evt,
@@ -116,7 +116,10 @@ static struct clock_event_device sun4i_clockevent = {
 	.name = "sun4i_tick",
 	.rating = 350,
 	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sun4i_clkevt_mode,
+	.set_state_shutdown = sun4i_clkevt_shutdown,
+	.set_state_periodic = sun4i_clkevt_set_periodic,
+	.set_state_oneshot = sun4i_clkevt_set_oneshot,
+	.tick_resume = sun4i_clkevt_shutdown,
 	.set_next_event = sun4i_clkevt_next_event,
 };
 
-- 
1.9.1

[PATCH 33/74] clockevents/drivers/tegra20: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate tegra20 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Thierry Reding <treding@nvidia.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/tegra20_timer.c | 45 ++++++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 5a112d7..6ebda11 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -72,33 +72,36 @@ static int tegra_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void tegra_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
+static inline void timer_shutdown(struct clock_event_device *evt)
 {
-	u32 reg;
-
 	timer_writel(0, TIMER3_BASE + TIMER_PTV);
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		reg = 0xC0000000 | ((1000000/HZ)-1);
-		timer_writel(reg, TIMER3_BASE + TIMER_PTV);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+static int tegra_timer_shutdown(struct clock_event_device *evt)
+{
+	timer_shutdown(evt);
+	return 0;
+}
+
+static int tegra_timer_set_periodic(struct clock_event_device *evt)
+{
+	u32 reg = 0xC0000000 | ((1000000 / HZ) - 1);
+
+	timer_shutdown(evt);
+	timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+	return 0;
 }
 
 static struct clock_event_device tegra_clockevent = {
-	.name		= "timer0",
-	.rating		= 300,
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.set_next_event	= tegra_timer_set_next_event,
-	.set_mode	= tegra_timer_set_mode,
+	.name			= "timer0",
+	.rating			= 300,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event		= tegra_timer_set_next_event,
+	.set_state_shutdown	= tegra_timer_shutdown,
+	.set_state_periodic	= tegra_timer_set_periodic,
+	.set_state_oneshot	= tegra_timer_shutdown,
+	.tick_resume		= tegra_timer_shutdown,
 };
 
 static u64 notrace tegra_read_sched_clock(void)
-- 
1.9.1

[PATCH 34/74] clockevents/drivers/time-armada-370-xp: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate time-armada-370-xp driver to the new 'set-state' interface
provided by clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/time-armada-370-xp.c | 53 +++++++++++++++++---------------
 1 file changed, 28 insertions(+), 25 deletions(-)

diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 0c8c5e3..2162796 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -121,33 +121,33 @@ armada_370_xp_clkevt_next_event(unsigned long delta,
 	return 0;
 }
 
-static void
-armada_370_xp_clkevt_mode(enum clock_event_mode mode,
-			  struct clock_event_device *dev)
+static int armada_370_xp_clkevt_shutdown(struct clock_event_device *evt)
 {
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+	/*
+	 * Disable timer.
+	 */
+	local_timer_ctrl_clrset(TIMER0_EN, 0);
 
-		/*
-		 * Setup timer to fire at 1/HZ intervals.
-		 */
-		writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF);
-		writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF);
+	/*
+	 * ACK pending timer interrupt.
+	 */
+	writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
+	return 0;
+}
 
-		/*
-		 * Enable timer.
-		 */
-		local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
-	} else {
-		/*
-		 * Disable timer.
-		 */
-		local_timer_ctrl_clrset(TIMER0_EN, 0);
+static int armada_370_xp_clkevt_set_periodic(struct clock_event_device *evt)
+{
+	/*
+	 * Setup timer to fire at 1/HZ intervals.
+	 */
+	writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF);
+	writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF);
 
-		/*
-		 * ACK pending timer interrupt.
-		 */
-		writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS);
-	}
+	/*
+	 * Enable timer.
+	 */
+	local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
+	return 0;
 }
 
 static int armada_370_xp_clkevt_irq;
@@ -185,7 +185,10 @@ static int armada_370_xp_timer_setup(struct clock_event_device *evt)
 	evt->shift		= 32,
 	evt->rating		= 300,
 	evt->set_next_event	= armada_370_xp_clkevt_next_event,
-	evt->set_mode		= armada_370_xp_clkevt_mode,
+	evt->set_state_shutdown	= armada_370_xp_clkevt_shutdown;
+	evt->set_state_periodic	= armada_370_xp_clkevt_set_periodic;
+	evt->set_state_oneshot	= armada_370_xp_clkevt_shutdown;
+	evt->tick_resume	= armada_370_xp_clkevt_shutdown;
 	evt->irq		= armada_370_xp_clkevt_irq;
 	evt->cpumask		= cpumask_of(cpu);
 
@@ -197,7 +200,7 @@ static int armada_370_xp_timer_setup(struct clock_event_device *evt)
 
 static void armada_370_xp_timer_stop(struct clock_event_device *evt)
 {
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	evt->set_state_shutdown(evt);
 	disable_percpu_irq(evt->irq);
 }
 
-- 
1.9.1

[PATCH 35/74] clockevents/drivers/efm32: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate efm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

There is nothing to be done for resume state and so isn't implemented.

Cc: Uwe Kleine-König <kernel@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/time-efm32.c | 66 +++++++++++++++++++++-------------------
 1 file changed, 35 insertions(+), 31 deletions(-)

diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/time-efm32.c
index 5b6e3d5..b06e4c2 100644
--- a/drivers/clocksource/time-efm32.c
+++ b/drivers/clocksource/time-efm32.c
@@ -48,40 +48,42 @@ struct efm32_clock_event_ddata {
 	unsigned periodic_top;
 };
 
-static void efm32_clock_event_set_mode(enum clock_event_mode mode,
-				       struct clock_event_device *evtdev)
+static int efm32_clock_event_shutdown(struct clock_event_device *evtdev)
 {
 	struct efm32_clock_event_ddata *ddata =
 		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-		writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
-		writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-			       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-			       TIMERn_CTRL_MODE_DOWN,
-			       ddata->base + TIMERn_CTRL);
-		writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-		writel_relaxed(TIMERn_CTRL_PRESC_1024 |
-			       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
-			       TIMERn_CTRL_OSMEN |
-			       TIMERn_CTRL_MODE_DOWN,
-			       ddata->base + TIMERn_CTRL);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+	return 0;
+}
+
+static int efm32_clock_event_set_oneshot(struct clock_event_device *evtdev)
+{
+	struct efm32_clock_event_ddata *ddata =
+		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+		       TIMERn_CTRL_OSMEN |
+		       TIMERn_CTRL_MODE_DOWN,
+		       ddata->base + TIMERn_CTRL);
+	return 0;
+}
+
+static int efm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+{
+	struct efm32_clock_event_ddata *ddata =
+		container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+	writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+	writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
+	writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+		       TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+		       TIMERn_CTRL_MODE_DOWN,
+		       ddata->base + TIMERn_CTRL);
+	writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
+	return 0;
 }
 
 static int efm32_clock_event_set_next_event(unsigned long evt,
@@ -112,7 +114,9 @@ static struct efm32_clock_event_ddata clock_event_ddata = {
 	.evtdev = {
 		.name = "efm32 clockevent",
 		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_mode = efm32_clock_event_set_mode,
+		.set_state_shutdown = efm32_clock_event_shutdown,
+		.set_state_periodic = efm32_clock_event_set_periodic,
+		.set_state_oneshot = efm32_clock_event_set_oneshot,
 		.set_next_event = efm32_clock_event_set_next_event,
 		.rating = 200,
 	},
-- 
1.9.1

[PATCH 36/74] clockevents/drivers/orion: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate orion driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/time-orion.c | 46 +++++++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 20 deletions(-)

diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/time-orion.c
index 0b3ce03..0ece742 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/time-orion.c
@@ -60,30 +60,36 @@ static int orion_clkevt_next_event(unsigned long delta,
 	return 0;
 }
 
-static void orion_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *dev)
+static int orion_clkevt_shutdown(struct clock_event_device *dev)
 {
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		/* setup and enable periodic timer at 1/HZ intervals */
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
-		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
-		atomic_io_modify(timer_base + TIMER_CTRL,
-			TIMER1_RELOAD_EN | TIMER1_EN,
-			TIMER1_RELOAD_EN | TIMER1_EN);
-	} else {
-		/* disable timer */
-		atomic_io_modify(timer_base + TIMER_CTRL,
-			TIMER1_RELOAD_EN | TIMER1_EN, 0);
-	}
+	/* disable timer */
+	atomic_io_modify(timer_base + TIMER_CTRL,
+			 TIMER1_RELOAD_EN | TIMER1_EN, 0);
+	return 0;
+}
+
+static int orion_clkevt_set_periodic(struct clock_event_device *dev)
+{
+	/* setup and enable periodic timer at 1/HZ intervals */
+	writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
+	writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
+	atomic_io_modify(timer_base + TIMER_CTRL,
+			 TIMER1_RELOAD_EN | TIMER1_EN,
+			 TIMER1_RELOAD_EN | TIMER1_EN);
+	return 0;
 }
 
 static struct clock_event_device orion_clkevt = {
-	.name		= "orion_event",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 32,
-	.rating		= 300,
-	.set_next_event	= orion_clkevt_next_event,
-	.set_mode	= orion_clkevt_mode,
+	.name			= "orion_event",
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.shift			= 32,
+	.rating			= 300,
+	.set_next_event		= orion_clkevt_next_event,
+	.set_state_shutdown	= orion_clkevt_shutdown,
+	.set_state_periodic	= orion_clkevt_set_periodic,
+	.set_state_oneshot	= orion_clkevt_shutdown,
+	.tick_resume		= orion_clkevt_shutdown,
 };
 
 static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
-- 
1.9.1

[PATCH 37/74] clockevents/drivers/atlas7: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate atlas7 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-atlas7.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/clocksource/timer-atlas7.c b/drivers/clocksource/timer-atlas7.c
index 60f9de3..27fa136 100644
--- a/drivers/clocksource/timer-atlas7.c
+++ b/drivers/clocksource/timer-atlas7.c
@@ -76,7 +76,7 @@ static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
 	/* clear timer interrupt */
 	writel_relaxed(BIT(cpu), sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
 
-	if (ce->mode == CLOCK_EVT_MODE_ONESHOT)
+	if (clockevent_state_oneshot(ce))
 		sirfsoc_timer_count_disable(cpu);
 
 	ce->event_handler(ce);
@@ -117,18 +117,11 @@ static int sirfsoc_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *ce)
+/* Oneshot is enabled in set_next_event */
+static int sirfsoc_timer_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* enable in set_next_event */
-		break;
-	default:
-		break;
-	}
-
 	sirfsoc_timer_count_disable(smp_processor_id());
+	return 0;
 }
 
 static void sirfsoc_clocksource_suspend(struct clocksource *cs)
@@ -193,7 +186,9 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce)
 	ce->name = "local_timer";
 	ce->features = CLOCK_EVT_FEAT_ONESHOT;
 	ce->rating = 200;
-	ce->set_mode = sirfsoc_timer_set_mode;
+	ce->set_state_shutdown = sirfsoc_timer_shutdown;
+	ce->set_state_oneshot = sirfsoc_timer_shutdown;
+	ce->tick_resume = sirfsoc_timer_shutdown;
 	ce->set_next_event = sirfsoc_timer_set_next_event;
 	clockevents_calc_mult_shift(ce, atlas7_timer_rate, 60);
 	ce->max_delta_ns = clockevent_delta2ns(-2, ce);
-- 
1.9.1

[PATCH 38/74] clockevents/drivers/atmel: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate atmel driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/clocksource/timer-atmel-pit.c | 41 +++++++++++++++--------------------
 1 file changed, 18 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
index c0304ff..5875322 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -90,33 +90,27 @@ static cycle_t read_pit_clk(struct clocksource *cs)
 	return elapsed;
 }
 
+static int pit_clkevt_shutdown(struct clock_event_device *dev)
+{
+	struct pit_data *data = clkevt_to_pit_data(dev);
+
+	/* disable irq, leaving the clocksource active */
+	pit_write(data->base, AT91_PIT_MR, (data->cycle - 1) | AT91_PIT_PITEN);
+	return 0;
+}
+
 /*
  * Clockevent device:  interrupts every 1/HZ (== pit_cycles * MCK/16)
  */
-static void
-pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static int pit_clkevt_set_periodic(struct clock_event_device *dev)
 {
 	struct pit_data *data = clkevt_to_pit_data(dev);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* update clocksource counter */
-		data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR));
-		pit_write(data->base, AT91_PIT_MR,
-			  (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		BUG();
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq, leaving the clocksource active */
-		pit_write(data->base, AT91_PIT_MR,
-			  (data->cycle - 1) | AT91_PIT_PITEN);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	/* update clocksource counter */
+	data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR));
+	pit_write(data->base, AT91_PIT_MR,
+		  (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN);
+	return 0;
 }
 
 static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
@@ -162,7 +156,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 	WARN_ON_ONCE(!irqs_disabled());
 
 	/* The PIT interrupt may be disabled, and is shared */
-	if ((data->clkevt.mode == CLOCK_EVT_MODE_PERIODIC) &&
+	if (clockevent_state_periodic(&data->clkevt) &&
 	    (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) {
 		unsigned nr_ticks;
 
@@ -227,7 +221,8 @@ static void __init at91sam926x_pit_common_init(struct pit_data *data)
 	data->clkevt.rating = 100;
 	data->clkevt.cpumask = cpumask_of(0);
 
-	data->clkevt.set_mode = pit_clkevt_mode;
+	data->clkevt.set_state_shutdown = pit_clkevt_shutdown;
+	data->clkevt.set_state_periodic = pit_clkevt_set_periodic;
 	data->clkevt.resume = at91sam926x_pit_resume;
 	data->clkevt.suspend = at91sam926x_pit_suspend;
 	clockevents_register_device(&data->clkevt);
-- 
1.9.1

[PATCH 39/74] clockevents/drivers/atmel-st: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate atmel-st driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 drivers/clocksource/timer-atmel-st.c | 69 ++++++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 27 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
index 1692e17..41b7b6d 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -106,36 +106,47 @@ static struct clocksource clk32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void
-clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static void clkdev32k_disable_and_flush_irq(void)
 {
 	unsigned int val;
 
 	/* Disable and flush pending timer interrupts */
 	regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
 	regmap_read(regmap_st, AT91_ST_SR, &val);
-
 	last_crtr = read_CRTR();
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* PIT for periodic irqs; fixed rate of 1/HZ */
-		irqmask = AT91_ST_PITS;
-		regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* ALM for oneshot irqs, set by next_event()
-		 * before 32 seconds have passed
-		 */
-		irqmask = AT91_ST_ALMS;
-		regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		irqmask = 0;
-		break;
-	}
+}
+
+static int clkevt32k_shutdown(struct clock_event_device *evt)
+{
+	clkdev32k_disable_and_flush_irq();
+	irqmask = 0;
+	regmap_write(regmap_st, AT91_ST_IER, irqmask);
+	return 0;
+}
+
+static int clkevt32k_set_oneshot(struct clock_event_device *dev)
+{
+	clkdev32k_disable_and_flush_irq();
+
+	/*
+	 * ALM for oneshot irqs, set by next_event()
+	 * before 32 seconds have passed.
+	 */
+	irqmask = AT91_ST_ALMS;
+	regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
 	regmap_write(regmap_st, AT91_ST_IER, irqmask);
+	return 0;
+}
+
+static int clkevt32k_set_periodic(struct clock_event_device *dev)
+{
+	clkdev32k_disable_and_flush_irq();
+
+	/* PIT for periodic irqs; fixed rate of 1/HZ */
+	irqmask = AT91_ST_PITS;
+	regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
+	regmap_write(regmap_st, AT91_ST_IER, irqmask);
+	return 0;
 }
 
 static int
@@ -170,11 +181,15 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 }
 
 static struct clock_event_device clkevt = {
-	.name		= "at91_tick",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 150,
-	.set_next_event	= clkevt32k_next_event,
-	.set_mode	= clkevt32k_mode,
+	.name			= "at91_tick",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 150,
+	.set_next_event		= clkevt32k_next_event,
+	.set_state_shutdown	= clkevt32k_shutdown,
+	.set_state_periodic	= clkevt32k_set_periodic,
+	.set_state_oneshot	= clkevt32k_set_oneshot,
+	.tick_resume		= clkevt32k_shutdown,
 };
 
 /*
-- 
1.9.1

[PATCH 40/74] clockevents/drivers/digicolor: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate digicolor driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
---
 drivers/clocksource/timer-digicolor.c | 41 +++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-digicolor.c b/drivers/clocksource/timer-digicolor.c
index 7f8388c..e73947f0f 100644
--- a/drivers/clocksource/timer-digicolor.c
+++ b/drivers/clocksource/timer-digicolor.c
@@ -87,27 +87,27 @@ static inline void dc_timer_set_count(struct clock_event_device *ce,
 	writel(count, dt->base + COUNT(dt->timer_id));
 }
 
-static void digicolor_clkevt_mode(enum clock_event_mode mode,
-				  struct clock_event_device *ce)
+static int digicolor_clkevt_shutdown(struct clock_event_device *ce)
+{
+	dc_timer_disable(ce);
+	return 0;
+}
+
+static int digicolor_clkevt_set_oneshot(struct clock_event_device *ce)
+{
+	dc_timer_disable(ce);
+	dc_timer_enable(ce, CONTROL_MODE_ONESHOT);
+	return 0;
+}
+
+static int digicolor_clkevt_set_periodic(struct clock_event_device *ce)
 {
 	struct digicolor_timer *dt = dc_timer(ce);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		dc_timer_disable(ce);
-		dc_timer_set_count(ce, dt->ticks_per_jiffy);
-		dc_timer_enable(ce, CONTROL_MODE_PERIODIC);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		dc_timer_disable(ce);
-		dc_timer_enable(ce, CONTROL_MODE_ONESHOT);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		dc_timer_disable(ce);
-		break;
-	}
+	dc_timer_disable(ce);
+	dc_timer_set_count(ce, dt->ticks_per_jiffy);
+	dc_timer_enable(ce, CONTROL_MODE_PERIODIC);
+	return 0;
 }
 
 static int digicolor_clkevt_next_event(unsigned long evt,
@@ -125,7 +125,10 @@ static struct digicolor_timer dc_timer_dev = {
 		.name = "digicolor_tick",
 		.rating = 340,
 		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-		.set_mode = digicolor_clkevt_mode,
+		.set_state_shutdown = digicolor_clkevt_shutdown,
+		.set_state_periodic = digicolor_clkevt_set_periodic,
+		.set_state_oneshot = digicolor_clkevt_set_oneshot,
+		.tick_resume = digicolor_clkevt_shutdown,
 		.set_next_event = digicolor_clkevt_next_event,
 	},
 	.timer_id = TIMER_C,
-- 
1.9.1

[PATCH 41/74] clockevents/drivers/integrator: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate integrator driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

For oneshot mode the clkevt device was first getting disabled by
clearing TIMER_CTRL_ENABLE bits in TIMER_CTRL register, followed by
clearing TIMER_CTRL_PERIODIC bit. Both these are done with a single
write operation now.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/clocksource/timer-integrator-ap.c | 58 ++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 25 deletions(-)

diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index a68866e..3f59ac2 100644
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -75,33 +75,37 @@ static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+static int clkevt_shutdown(struct clock_event_device *evt)
 {
 	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
 
 	/* Disable timer */
 	writel(ctrl, clkevt_base + TIMER_CTRL);
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Enable the timer and start the periodic tick */
-		writel(timer_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		writel(ctrl, clkevt_base + TIMER_CTRL);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Leave the timer disabled, .set_next_event will enable it */
-		ctrl &= ~TIMER_CTRL_PERIODIC;
-		writel(ctrl, clkevt_base + TIMER_CTRL);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-	default:
-		/* Just leave in disabled state */
-		break;
-	}
+static int clkevt_set_oneshot(struct clock_event_device *evt)
+{
+	u32 ctrl = readl(clkevt_base + TIMER_CTRL) &
+		   ~(TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC);
+
+	/* Leave the timer disabled, .set_next_event will enable it */
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+	return 0;
+}
 
+static int clkevt_set_periodic(struct clock_event_device *evt)
+{
+	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+	/* Disable timer */
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+
+	/* Enable the timer and start the periodic tick */
+	writel(timer_reload, clkevt_base + TIMER_LOAD);
+	ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+	return 0;
 }
 
 static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
@@ -116,11 +120,15 @@ static int clkevt_set_next_event(unsigned long next, struct clock_event_device *
 }
 
 static struct clock_event_device integrator_clockevent = {
-	.name		= "timer1",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= clkevt_set_mode,
-	.set_next_event	= clkevt_set_next_event,
-	.rating		= 300,
+	.name			= "timer1",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= clkevt_shutdown,
+	.set_state_periodic	= clkevt_set_periodic,
+	.set_state_oneshot	= clkevt_set_oneshot,
+	.tick_resume		= clkevt_shutdown,
+	.set_next_event		= clkevt_set_next_event,
+	.rating			= 300,
 };
 
 static struct irqaction integrator_timer_irq = {
-- 
1.9.1

[PATCH 42/74] clockevents/drivers/keystone: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate keystone driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also pass the mode-mask to keystone_timer_config() instead of the mode
as mode macro's aren't valid anymore.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-keystone.c | 44 +++++++++++++-----------------------
 1 file changed, 16 insertions(+), 28 deletions(-)

diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
index 0250354..edacf39 100644
--- a/drivers/clocksource/timer-keystone.c
+++ b/drivers/clocksource/timer-keystone.c
@@ -72,10 +72,10 @@ static inline void keystone_timer_barrier(void)
 
 /**
  * keystone_timer_config: configures timer to work in oneshot/periodic modes.
- * @ mode: mode to configure
+ * @ mask: mask of the mode to configure
  * @ period: cycles number to configure for
  */
-static int keystone_timer_config(u64 period, enum clock_event_mode mode)
+static int keystone_timer_config(u64 period, int mask)
 {
 	u32 tcr;
 	u32 off;
@@ -84,16 +84,7 @@ static int keystone_timer_config(u64 period, enum clock_event_mode mode)
 	off = tcr & ~(TCR_ENAMODE_MASK);
 
 	/* set enable mode */
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-		tcr |= TCR_ENAMODE_ONESHOT_MASK;
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-		tcr |= TCR_ENAMODE_PERIODIC_MASK;
-		break;
-	default:
-		return -1;
-	}
+	tcr |= mask;
 
 	/* disable timer */
 	keystone_timer_writel(off, TCR);
@@ -138,24 +129,19 @@ static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
 static int keystone_set_next_event(unsigned long cycles,
 				  struct clock_event_device *evt)
 {
-	return keystone_timer_config(cycles, evt->mode);
+	return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK);
 }
 
-static void keystone_set_mode(enum clock_event_mode mode,
-			     struct clock_event_device *evt)
+static int keystone_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		keystone_timer_config(timer.hz_period, CLOCK_EVT_MODE_PERIODIC);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_ONESHOT:
-		keystone_timer_disable();
-		break;
-	default:
-		break;
-	}
+	keystone_timer_disable();
+	return 0;
+}
+
+static int keystone_set_periodic(struct clock_event_device *evt)
+{
+	keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK);
+	return 0;
 }
 
 static void __init keystone_timer_init(struct device_node *np)
@@ -222,7 +208,9 @@ static void __init keystone_timer_init(struct device_node *np)
 	/* setup clockevent */
 	event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	event_dev->set_next_event = keystone_set_next_event;
-	event_dev->set_mode = keystone_set_mode;
+	event_dev->set_state_shutdown = keystone_shutdown;
+	event_dev->set_state_periodic = keystone_set_periodic;
+	event_dev->set_state_oneshot = keystone_shutdown;
 	event_dev->cpumask = cpu_all_mask;
 	event_dev->owner = THIS_MODULE;
 	event_dev->name = TIMER_NAME;
-- 
1.9.1

[PATCH 43/74] clockevents/drivers/prima2: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate prima2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-prima2.c | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index ce18d57..78de982 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -104,26 +104,21 @@ static int sirfsoc_timer_set_next_event(unsigned long delta,
 	return next - now > delta ? -ETIME : 0;
 }
 
-static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *ce)
+static int sirfsoc_timer_shutdown(struct clock_event_device *evt)
 {
 	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		WARN_ON(1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		writel_relaxed(val | BIT(0),
-			sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel_relaxed(val & ~BIT(0),
-			sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+
+	writel_relaxed(val & ~BIT(0),
+		       sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+	return 0;
+}
+
+static int sirfsoc_timer_set_oneshot(struct clock_event_device *evt)
+{
+	u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+
+	writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
+	return 0;
 }
 
 static void sirfsoc_clocksource_suspend(struct clocksource *cs)
@@ -157,7 +152,8 @@ static struct clock_event_device sirfsoc_clockevent = {
 	.name = "sirfsoc_clockevent",
 	.rating = 200,
 	.features = CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = sirfsoc_timer_set_mode,
+	.set_state_shutdown = sirfsoc_timer_shutdown,
+	.set_state_oneshot = sirfsoc_timer_set_oneshot,
 	.set_next_event = sirfsoc_timer_set_next_event,
 };
 
-- 
1.9.1

[PATCH 44/74] clockevents/drivers/stm32: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate stm32 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Acked-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
 drivers/clocksource/timer-stm32.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index a97e8b5..f3dcb76 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -40,24 +40,25 @@ struct stm32_clock_event_ddata {
 	void __iomem *base;
 };
 
-static void stm32_clock_event_set_mode(enum clock_event_mode mode,
-				       struct clock_event_device *evtdev)
+static int stm32_clock_event_shutdown(struct clock_event_device *evtdev)
 {
 	struct stm32_clock_event_ddata *data =
 		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
 	void *base = data->base;
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel_relaxed(data->periodic_top, base + TIM_ARR);
-		writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
-		break;
+	writel_relaxed(0, base + TIM_CR1);
+	return 0;
+}
 
-	case CLOCK_EVT_MODE_ONESHOT:
-	default:
-		writel_relaxed(0, base + TIM_CR1);
-		break;
-	}
+static int stm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+{
+	struct stm32_clock_event_ddata *data =
+		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+	void *base = data->base;
+
+	writel_relaxed(data->periodic_top, base + TIM_ARR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
+	return 0;
 }
 
 static int stm32_clock_event_set_next_event(unsigned long evt,
@@ -88,7 +89,10 @@ static struct stm32_clock_event_ddata clock_event_ddata = {
 	.evtdev = {
 		.name = "stm32 clockevent",
 		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_mode = stm32_clock_event_set_mode,
+		.set_state_shutdown = stm32_clock_event_shutdown,
+		.set_state_periodic = stm32_clock_event_set_periodic,
+		.set_state_oneshot = stm32_clock_event_shutdown,
+		.tick_resume = stm32_clock_event_shutdown,
 		.set_next_event = stm32_clock_event_set_next_event,
 		.rating = 200,
 	},
-- 
1.9.1

[PATCH 45/74] clockevents/drivers/sun5i: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sun5i driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/clocksource/timer-sun5i.c | 45 ++++++++++++++++++++++-----------------
 1 file changed, 26 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index 0ffb4ea..bca9573 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -103,27 +103,31 @@ static void sun5i_clkevt_time_start(struct sun5i_timer_clkevt *ce, u8 timer, boo
 	       ce->timer.base + TIMER_CTL_REG(timer));
 }
 
-static void sun5i_clkevt_mode(enum clock_event_mode mode,
-			      struct clock_event_device *clkevt)
+static int sun5i_clkevt_shutdown(struct clock_event_device *clkevt)
 {
 	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		sun5i_clkevt_time_stop(ce, 0);
-		sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy);
-		sun5i_clkevt_time_start(ce, 0, true);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		sun5i_clkevt_time_stop(ce, 0);
-		sun5i_clkevt_time_start(ce, 0, false);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		sun5i_clkevt_time_stop(ce, 0);
-		break;
-	}
+	sun5i_clkevt_time_stop(ce, 0);
+	return 0;
+}
+
+static int sun5i_clkevt_set_oneshot(struct clock_event_device *clkevt)
+{
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
+	sun5i_clkevt_time_stop(ce, 0);
+	sun5i_clkevt_time_start(ce, 0, false);
+	return 0;
+}
+
+static int sun5i_clkevt_set_periodic(struct clock_event_device *clkevt)
+{
+	struct sun5i_timer_clkevt *ce = to_sun5i_timer_clkevt(clkevt);
+
+	sun5i_clkevt_time_stop(ce, 0);
+	sun5i_clkevt_time_setup(ce, 0, ce->timer.ticks_per_jiffy);
+	sun5i_clkevt_time_start(ce, 0, true);
+	return 0;
 }
 
 static int sun5i_clkevt_next_event(unsigned long evt,
@@ -286,7 +290,10 @@ static int __init sun5i_setup_clockevent(struct device_node *node, void __iomem
 	ce->clkevt.name = node->name;
 	ce->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	ce->clkevt.set_next_event = sun5i_clkevt_next_event;
-	ce->clkevt.set_mode = sun5i_clkevt_mode;
+	ce->clkevt.set_state_shutdown = sun5i_clkevt_shutdown;
+	ce->clkevt.set_state_periodic = sun5i_clkevt_set_periodic;
+	ce->clkevt.set_state_oneshot = sun5i_clkevt_set_oneshot;
+	ce->clkevt.tick_resume = sun5i_clkevt_shutdown;
 	ce->clkevt.rating = 340;
 	ce->clkevt.irq = irq;
 	ce->clkevt.cpumask = cpu_possible_mask;
-- 
1.9.1

[PATCH 46/74] clockevents/drivers/u300: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate u300 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/clocksource/timer-u300.c | 155 +++++++++++++++++++--------------------
 1 file changed, 77 insertions(+), 78 deletions(-)

diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
index 5dcf756..1744b24 100644
--- a/drivers/clocksource/timer-u300.c
+++ b/drivers/clocksource/timer-u300.c
@@ -187,85 +187,82 @@ struct u300_clockevent_data {
 	unsigned ticks_per_jiffy;
 };
 
+static int u300_shutdown(struct clock_event_device *evt)
+{
+	/* Disable interrupts on GP1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_DGPT1);
+	return 0;
+}
+
 /*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
+ * If we have oneshot timer active, the oneshot scheduling function
  * u300_set_next_event() is called immediately after.
  */
-static void u300_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
+static int u300_set_oneshot(struct clock_event_device *evt)
+{
+	/* Just return; here? */
+	/*
+	 * The actual event will be programmed by the next event hook,
+	 * so we just set a dummy value somewhere at the end of the
+	 * universe here.
+	 */
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_DGPT1);
+	/*
+	 * Expire far in the future, u300_set_next_event() will be
+	 * called soon...
+	 */
+	writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
+	/* We run one shot per tick here! */
+	writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+	       u300_timer_base + U300_TIMER_APP_SGPT1M);
+	/* Enable interrupts for this timer */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Enable timer */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_EGPT1);
+	return 0;
+}
+
+static int u300_set_periodic(struct clock_event_device *evt)
 {
 	struct u300_clockevent_data *cevdata =
 		container_of(evt, struct u300_clockevent_data, cevd);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Set the periodic mode to a certain number of ticks per
-		 * jiffy.
-		 */
-		writel(cevdata->ticks_per_jiffy,
-		       u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/*
-		 * Set continuous mode, so the timer keeps triggering
-		 * interrupts.
-		 */
-		writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable timer interrupts */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Then enable the OS timer again */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Just break; here? */
-		/*
-		 * The actual event will be programmed by the next event hook,
-		 * so we just set a dummy value somewhere at the end of the
-		 * universe here.
-		 */
-		/* Disable interrupts on GPT1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 while we're reprogramming it. */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		/*
-		 * Expire far in the future, u300_set_next_event() will be
-		 * called soon...
-		 */
-		writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
-		/* We run one shot per tick here! */
-		writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
-		       u300_timer_base + U300_TIMER_APP_SGPT1M);
-		/* Enable interrupts for this timer */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Enable timer */
-		writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
-		       u300_timer_base + U300_TIMER_APP_EGPT1);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/* Disable interrupts on GP1 */
-		writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_GPT1IE);
-		/* Disable GP1 */
-		writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
-		       u300_timer_base + U300_TIMER_APP_DGPT1);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		/* Ignore this call */
-		break;
-	}
+	/* Disable interrupts on GPT1 */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Disable GP1 while we're reprogramming it. */
+	writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+	       u300_timer_base + U300_TIMER_APP_DGPT1);
+	/*
+	 * Set the periodic mode to a certain number of ticks per
+	 * jiffy.
+	 */
+	writel(cevdata->ticks_per_jiffy,
+	       u300_timer_base + U300_TIMER_APP_GPT1TC);
+	/*
+	 * Set continuous mode, so the timer keeps triggering
+	 * interrupts.
+	 */
+	writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+	       u300_timer_base + U300_TIMER_APP_SGPT1M);
+	/* Enable timer interrupts */
+	writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_GPT1IE);
+	/* Then enable the OS timer again */
+	writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+	       u300_timer_base + U300_TIMER_APP_EGPT1);
+	return 0;
 }
 
 /*
@@ -309,13 +306,15 @@ static int u300_set_next_event(unsigned long cycles,
 static struct u300_clockevent_data u300_clockevent_data = {
 	/* Use general purpose timer 1 as clock event */
 	.cevd = {
-		.name		= "GPT1",
+		.name			= "GPT1",
 		/* Reasonably fast and accurate clock event */
-		.rating		= 300,
-		.features	= CLOCK_EVT_FEAT_PERIODIC |
-			CLOCK_EVT_FEAT_ONESHOT,
-		.set_next_event	= u300_set_next_event,
-		.set_mode	= u300_set_mode,
+		.rating			= 300,
+		.features		= CLOCK_EVT_FEAT_PERIODIC |
+					  CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event		= u300_set_next_event,
+		.set_state_shutdown	= u300_shutdown,
+		.set_state_periodic	= u300_set_periodic,
+		.set_state_oneshot	= u300_set_oneshot,
 	},
 };
 
-- 
1.9.1

[PATCH 47/74] clockevents/drivers/vf_pit: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate vf_pit driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jingchang Lu <b35083@freescale.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Stefan Agner <stefan@agner.ch>
---
 drivers/clocksource/vf_pit_timer.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
index b45ac62..f07ba99 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -86,20 +86,16 @@ static int pit_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void pit_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static int pit_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pit_set_next_event(cycle_per_jiffy, evt);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		pit_timer_disable();
-		break;
-	default:
-		break;
-	}
+	pit_timer_disable();
+	return 0;
+}
+
+static int pit_set_periodic(struct clock_event_device *evt)
+{
+	pit_set_next_event(cycle_per_jiffy, evt);
+	return 0;
 }
 
 static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
@@ -114,7 +110,7 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
 	 * and start the counter again. So software need to disable the timer
 	 * to stop the counter loop in ONESHOT mode.
 	 */
-	if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT))
+	if (likely(clockevent_state_oneshot(evt)))
 		pit_timer_disable();
 
 	evt->event_handler(evt);
@@ -125,7 +121,8 @@ static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
 static struct clock_event_device clockevent_pit = {
 	.name		= "VF pit timer",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= pit_set_mode,
+	.set_state_shutdown = pit_shutdown,
+	.set_state_periodic = pit_set_periodic,
 	.set_next_event	= pit_set_next_event,
 	.rating		= 300,
 };
-- 
1.9.1

[PATCH 48/74] clockevents/drivers/vt8500: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate vt8500 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/vt8500_timer.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 1098ed3..a92e94b 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -88,29 +88,20 @@ static int vt8500_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void vt8500_timer_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
+static int vt8500_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel(readl(regbase + TIMER_CTRL_VAL) | 1,
-			regbase + TIMER_CTRL_VAL);
-		writel(0, regbase + TIMER_IER_VAL);
-		break;
-	}
+	writel(readl(regbase + TIMER_CTRL_VAL) | 1, regbase + TIMER_CTRL_VAL);
+	writel(0, regbase + TIMER_IER_VAL);
+	return 0;
 }
 
 static struct clock_event_device clockevent = {
-	.name           = "vt8500_timer",
-	.features       = CLOCK_EVT_FEAT_ONESHOT,
-	.rating         = 200,
-	.set_next_event = vt8500_timer_set_next_event,
-	.set_mode       = vt8500_timer_set_mode,
+	.name			= "vt8500_timer",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= vt8500_timer_set_next_event,
+	.set_state_shutdown	= vt8500_shutdown,
+	.set_state_oneshot	= vt8500_shutdown,
 };
 
 static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 49/74] clockevents/drivers/zevio: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate zevio driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/zevio-timer.c | 44 +++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/zevio-timer.c b/drivers/clocksource/zevio-timer.c
index 7ce4421..ceaa613 100644
--- a/drivers/clocksource/zevio-timer.c
+++ b/drivers/clocksource/zevio-timer.c
@@ -76,32 +76,28 @@ static int zevio_timer_set_event(unsigned long delta,
 	return 0;
 }
 
-static void zevio_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *dev)
+static int zevio_timer_shutdown(struct clock_event_device *dev)
 {
 	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
 						 clkevt);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Enable timer interrupts */
-		writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
-		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		/* Disable timer interrupts */
-		writel(0, timer->interrupt_regs + IO_INTR_MSK);
-		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
-		/* Stop timer */
-		writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-	default:
-		/* Unsupported */
-		break;
-	}
+	/* Disable timer interrupts */
+	writel(0, timer->interrupt_regs + IO_INTR_MSK);
+	writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+	/* Stop timer */
+	writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+	return 0;
+}
+
+static int zevio_timer_set_oneshot(struct clock_event_device *dev)
+{
+	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+						 clkevt);
+
+	/* Enable timer interrupts */
+	writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
+	writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+	return 0;
 }
 
 static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
@@ -162,7 +158,9 @@ static int __init zevio_timer_add(struct device_node *node)
 	if (timer->interrupt_regs && irqnr) {
 		timer->clkevt.name		= timer->clockevent_name;
 		timer->clkevt.set_next_event	= zevio_timer_set_event;
-		timer->clkevt.set_mode		= zevio_timer_set_mode;
+		timer->clkevt.set_state_shutdown = zevio_timer_shutdown;
+		timer->clkevt.set_state_oneshot = zevio_timer_set_oneshot;
+		timer->clkevt.tick_resume	= zevio_timer_set_oneshot;
 		timer->clkevt.rating		= 200;
 		timer->clkevt.cpumask		= cpu_all_mask;
 		timer->clkevt.features		= CLOCK_EVT_FEAT_ONESHOT;
-- 
1.9.1

[PATCH 50/74] clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate tcb_clksrc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/tcb_clksrc.c | 93 ++++++++++++++++++++++------------------
 1 file changed, 51 insertions(+), 42 deletions(-)

diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 8bdbc45..d28d2fe 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -91,55 +91,62 @@ static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
  */
 static u32 timer_clock;
 
-static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
+static int tc_shutdown(struct clock_event_device *d)
 {
 	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
 	void __iomem		*regs = tcd->regs;
 
-	if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
-			|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
-		__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
-		__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
-		clk_disable(tcd->clk);
-	}
+	__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
+	__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
+	clk_disable(tcd->clk);
 
-	switch (m) {
+	return 0;
+}
 
-	/* By not making the gentime core emulate periodic mode on top
-	 * of oneshot, we get lower overhead and improved accuracy.
-	 */
-	case CLOCK_EVT_MODE_PERIODIC:
-		clk_enable(tcd->clk);
+static int tc_set_oneshot(struct clock_event_device *d)
+{
+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+	void __iomem		*regs = tcd->regs;
 
-		/* slow clock, count up to RC, then irq and restart */
-		__raw_writel(timer_clock
-				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-				regs + ATMEL_TC_REG(2, CMR));
-		__raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+	if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+		tc_shutdown(d);
 
-		/* Enable clock and interrupts on RC compare */
-		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+	clk_enable(tcd->clk);
 
-		/* go go gadget! */
-		__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
-				regs + ATMEL_TC_REG(2, CCR));
-		break;
+	/* slow clock, count up to RC, then irq and stop */
+	__raw_writel(timer_clock | ATMEL_TC_CPCSTOP | ATMEL_TC_WAVE |
+		     ATMEL_TC_WAVESEL_UP_AUTO, regs + ATMEL_TC_REG(2, CMR));
+	__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
 
-	case CLOCK_EVT_MODE_ONESHOT:
-		clk_enable(tcd->clk);
+	/* set_next_event() configures and starts the timer */
+	return 0;
+}
 
-		/* slow clock, count up to RC, then irq and stop */
-		__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
-				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
-				regs + ATMEL_TC_REG(2, CMR));
-		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+static int tc_set_periodic(struct clock_event_device *d)
+{
+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+	void __iomem		*regs = tcd->regs;
 
-		/* set_next_event() configures and starts the timer */
-		break;
+	if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+		tc_shutdown(d);
 
-	default:
-		break;
-	}
+	/* By not making the gentime core emulate periodic mode on top
+	 * of oneshot, we get lower overhead and improved accuracy.
+	 */
+	clk_enable(tcd->clk);
+
+	/* slow clock, count up to RC, then irq and restart */
+	__raw_writel(timer_clock | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+		     regs + ATMEL_TC_REG(2, CMR));
+	__raw_writel((32768 + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+
+	/* Enable clock and interrupts on RC compare */
+	__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+	/* go go gadget! */
+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, regs +
+		     ATMEL_TC_REG(2, CCR));
+	return 0;
 }
 
 static int tc_next_event(unsigned long delta, struct clock_event_device *d)
@@ -154,13 +161,15 @@ static int tc_next_event(unsigned long delta, struct clock_event_device *d)
 
 static struct tc_clkevt_device clkevt = {
 	.clkevt	= {
-		.name		= "tc_clkevt",
-		.features	= CLOCK_EVT_FEAT_PERIODIC
-					| CLOCK_EVT_FEAT_ONESHOT,
+		.name			= "tc_clkevt",
+		.features		= CLOCK_EVT_FEAT_PERIODIC |
+					  CLOCK_EVT_FEAT_ONESHOT,
 		/* Should be lower than at91rm9200's system timer */
-		.rating		= 125,
-		.set_next_event	= tc_next_event,
-		.set_mode	= tc_mode,
+		.rating			= 125,
+		.set_next_event		= tc_next_event,
+		.set_state_shutdown	= tc_shutdown,
+		.set_state_periodic	= tc_set_periodic,
+		.set_state_oneshot	= tc_set_oneshot,
 	},
 };
 
-- 
1.9.1

[PATCH 51/74] clockevents/drivers/exynos_mct: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate exynos_mct driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/exynos_mct.c | 85 +++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 45 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 4d2330a..029f96a 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -257,15 +257,14 @@ static void exynos4_mct_comp0_stop(void)
 	exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
 }
 
-static void exynos4_mct_comp0_start(enum clock_event_mode mode,
-				    unsigned long cycles)
+static void exynos4_mct_comp0_start(bool periodic, unsigned long cycles)
 {
 	unsigned int tcon;
 	cycle_t comp_cycle;
 
 	tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
 
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+	if (periodic) {
 		tcon |= MCT_G_TCON_COMP0_AUTO_INC;
 		exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
 	}
@@ -283,38 +282,38 @@ static void exynos4_mct_comp0_start(enum clock_event_mode mode,
 static int exynos4_comp_set_next_event(unsigned long cycles,
 				       struct clock_event_device *evt)
 {
-	exynos4_mct_comp0_start(evt->mode, cycles);
+	exynos4_mct_comp0_start(false, cycles);
 
 	return 0;
 }
 
-static void exynos4_comp_set_mode(enum clock_event_mode mode,
-				  struct clock_event_device *evt)
+static int mct_set_state_shutdown(struct clock_event_device *evt)
 {
-	unsigned long cycles_per_jiffy;
 	exynos4_mct_comp0_stop();
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_jiffy =
-			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
-		exynos4_mct_comp0_start(mode, cycles_per_jiffy);
-		break;
+static int mct_set_state_periodic(struct clock_event_device *evt)
+{
+	unsigned long cycles_per_jiffy;
 
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
+			    >> evt->shift);
+	exynos4_mct_comp0_stop();
+	exynos4_mct_comp0_start(true, cycles_per_jiffy);
+	return 0;
 }
 
 static struct clock_event_device mct_comp_device = {
-	.name		= "mct-comp",
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 250,
-	.set_next_event	= exynos4_comp_set_next_event,
-	.set_mode	= exynos4_comp_set_mode,
+	.name			= "mct-comp",
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 250,
+	.set_next_event		= exynos4_comp_set_next_event,
+	.set_state_periodic	= mct_set_state_periodic,
+	.set_state_shutdown	= mct_set_state_shutdown,
+	.set_state_oneshot	= mct_set_state_shutdown,
+	.tick_resume		= mct_set_state_shutdown,
 };
 
 static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
@@ -390,39 +389,32 @@ static int exynos4_tick_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
-					 struct clock_event_device *evt)
+static int set_state_shutdown(struct clock_event_device *evt)
+{
+	exynos4_mct_tick_stop(this_cpu_ptr(&percpu_mct_tick));
+	return 0;
+}
+
+static int set_state_periodic(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
 	unsigned long cycles_per_jiffy;
 
+	cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
+			    >> evt->shift);
 	exynos4_mct_tick_stop(mevt);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_jiffy =
-			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
-		exynos4_mct_tick_start(cycles_per_jiffy, mevt);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	exynos4_mct_tick_start(cycles_per_jiffy, mevt);
+	return 0;
 }
 
 static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
-	struct clock_event_device *evt = &mevt->evt;
-
 	/*
 	 * This is for supporting oneshot mode.
 	 * Mct would generate interrupt periodically
 	 * without explicit stopping.
 	 */
-	if (evt->mode != CLOCK_EVT_MODE_PERIODIC)
+	if (!clockevent_state_periodic(&mevt->evt))
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
@@ -453,7 +445,10 @@ static int exynos4_local_timer_setup(struct mct_clock_event_device *mevt)
 	evt->name = mevt->name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
-	evt->set_mode = exynos4_tick_set_mode;
+	evt->set_state_periodic = set_state_periodic;
+	evt->set_state_shutdown = set_state_shutdown;
+	evt->set_state_oneshot = set_state_shutdown;
+	evt->tick_resume = set_state_shutdown;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 450;
 
@@ -479,7 +474,7 @@ static void exynos4_local_timer_stop(struct mct_clock_event_device *mevt)
 {
 	struct clock_event_device *evt = &mevt->evt;
 
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	evt->set_state_shutdown(evt);
 	if (mct_int_type == MCT_INT_SPI) {
 		if (evt->irq != -1)
 			disable_irq_nosync(evt->irq);
-- 
1.9.1

[PATCH 52/74] clockevents/drivers/dw_apb_timer: Add dynamic irq flag to the timer

[Daniel Lezcano]

From: Jisheng Zhang <jszhang@marvell.com>

Commit d2348fb6fdc6 ("tick: Dynamically set broadcast irq affinity")
adds one excellent feature CLOCK_EVT_FEAT_DYNIRQ to let the core set the
interrupt affinity of the broadcast interrupt to the cpu which has the
earliest expiry time. This patch adds CLOCK_EVT_FEAT_DYNIRQ flag to
avoid unnecessary wakeups and IPIs when the dw_apb_timer is used as
broadcast timer.

A simple test:
~ # rm /tmp/test.sh
~ # cat > /tmp/test.sh
cat /proc/interrupts
for i in `seq 10` ; do sleep $i; done
cat /proc/interrupts
~ # chmod +x /tmp/test.sh
~ # taskset 0x2 /tmp/test.sh

without the patch:

           CPU0       CPU1
 27:        115         36       GIC  27  arch_timer
 45:         62          0       GIC  45  mmc0
160:         88          0  interrupt-controller   8  timer
227:          0          0  interrupt-controller   4  f7e81400.i2c
228:          0          0  interrupt-controller   5  f7e81800.i2c
229:          0          0  interrupt-controller   7  dw_spi65535
230:          0          0  interrupt-controller  21  f7e84000.i2c
231:          0          0  interrupt-controller  20  f7e84800.i2c
265:        445          0  interrupt-controller   8  serial
IPI0:          0          0  CPU wakeup interrupts
IPI1:          0         11  Timer broadcast interrupts
IPI2:         56        104  Rescheduling interrupts
IPI3:          0          0  Function call interrupts
IPI4:          0          4  Single function call interrupts
IPI5:          0          0  CPU stop interrupts
IPI6:         25         27  IRQ work interrupts
IPI7:          0          0  completion interrupts
IPI8:          0          0  CPU backtrace
Err:          0
           CPU0       CPU1
 27:        115         38       GIC  27  arch_timer
 45:         62          0       GIC  45  mmc0
160:        160          0  interrupt-controller   8  timer
227:          0          0  interrupt-controller   4  f7e81400.i2c
228:          0          0  interrupt-controller   5  f7e81800.i2c
229:          0          0  interrupt-controller   7  dw_spi65535
230:          0          0  interrupt-controller  21  f7e84000.i2c
231:          0          0  interrupt-controller  20  f7e84800.i2c
265:        514          0  interrupt-controller   8  serial
IPI0:          0          0  CPU wakeup interrupts
IPI1:          0         83  Timer broadcast interrupts
IPI2:         56        104  Rescheduling interrupts
IPI3:          0          0  Function call interrupts
IPI4:          0          4  Single function call interrupts
IPI5:          0          0  CPU stop interrupts
IPI6:         25         46  IRQ work interrupts
IPI7:          0          0  completion interrupts
IPI8:          0          0  CPU backtrace
Err:          0

cpu0 get 160-88=72 timer interrupts, CPU1 got 83-11=72 broadcast timer
IPIs
So, overall system got 72+72=144 wake ups and 72 broadcast timer IPIs

With the patch:
           CPU0       CPU1
 27:        107         37       GIC  27  arch_timer
 45:         62          0       GIC  45  mmc0
160:         66          7  interrupt-controller   8  timer
227:          0          0  interrupt-controller   4  f7e81400.i2c
228:          0          0  interrupt-controller   5  f7e81800.i2c
229:          0          0  interrupt-controller   7  dw_spi65535
230:          0          0  interrupt-controller  21  f7e84000.i2c
231:          0          0  interrupt-controller  20  f7e84800.i2c
265:        311          0  interrupt-controller   8  serial
IPI0:          0          0  CPU wakeup interrupts
IPI1:          2          4  Timer broadcast interrupts
IPI2:         58        100  Rescheduling interrupts
IPI3:          0          0  Function call interrupts
IPI4:          0          4  Single function call interrupts
IPI5:          0          0  CPU stop interrupts
IPI6:         21         24  IRQ work interrupts
IPI7:          0          0  completion interrupts
IPI8:          0          0  CPU backtrace
Err:          0
           CPU0       CPU1
 27:        107         39       GIC  27  arch_timer
 45:         62          0       GIC  45  mmc0
160:         69         75  interrupt-controller   8  timer
227:          0          0  interrupt-controller   4  f7e81400.i2c
228:          0          0  interrupt-controller   5  f7e81800.i2c
229:          0          0  interrupt-controller   7  dw_spi65535
230:          0          0  interrupt-controller  21  f7e84000.i2c
231:          0          0  interrupt-controller  20  f7e84800.i2c
265:        380          0  interrupt-controller   8  serial
IPI0:          0          0  CPU wakeup interrupts
IPI1:          3          6  Timer broadcast interrupts
IPI2:         60        100  Rescheduling interrupts
IPI3:          0          0  Function call interrupts
IPI4:          0          4  Single function call interrupts
IPI5:          0          0  CPU stop interrupts
IPI6:         21         45  IRQ work interrupts
IPI7:          0          0  completion interrupts
IPI8:          0          0  CPU backtrace
Err:          0

cpu0 got 69-66=3, cpu1 got 75-7=68 timer interrupts. cpu0 got 3-2=1
broadcast timer IPIs, cpu1 got 6-4=2 broadcast timer IPIs.
So, overall system got 3+68+1+2=74 wakeups and 1+2=3 broadcast timer
IPIs

This patch removes 50% wakeups and almost 100% broadcast timer IPIs!

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/dw_apb_timer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 97ba7cb..c76c750 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -248,7 +248,8 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 						       &dw_ced->ced);
 	dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 	dw_ced->ced.cpumask = cpumask_of(cpu);
-	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
+				CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 	dw_ced->ced.set_state_shutdown = apbt_shutdown;
 	dw_ced->ced.set_state_periodic = apbt_set_periodic;
 	dw_ced->ced.set_state_oneshot = apbt_set_oneshot;
-- 
1.9.1

[PATCH 53/74] clockevents/drivers/sh_cmt: Remove obsolete sh-cmt-48 platform_device_id entry

[Daniel Lezcano]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Since the removal of the r8a7740 legacy SoC code in commit
44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile
A1"), all former users of the "sh-cmt-48-gen2" platform device name are
only supported in generic DT-only ARM multi-platform builds.  The driver
doesn't need to match platform devices by name anymore, hence remove the
corresponding platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/clocksource/sh_cmt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index e903026..33c3377 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -929,7 +929,6 @@ static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
 static const struct platform_device_id sh_cmt_id_table[] = {
 	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
 	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
-	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
 	{ }
 };
 MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
-- 
1.9.1

[PATCH 54/74] clockevents/drivers/timer-imx-gpt: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate timer-imx-gpt driver to the new 'set-state' interface provided
by clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Also drop:
- 'imx_timer.cem': It was caching the last state of the clockevent
  device. The same behavior can be achieved by using clockevents state
  helpers. These helpers are only required for oneshot mode as
  shutdown/resume wouldn't be done twice by the core.

- 'clock_event_mode_label': CLOCK_EVT_MODE_* shouldn't be used anymore
  by drivers. The prints are modified to print the set-state functions
  name now to debug the driver.

Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-imx-gpt.c | 75 +++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 37 deletions(-)

diff --git a/drivers/clocksource/timer-imx-gpt.c b/drivers/clocksource/timer-imx-gpt.c
index 2d59038..85111a7 100644
--- a/drivers/clocksource/timer-imx-gpt.c
+++ b/drivers/clocksource/timer-imx-gpt.c
@@ -83,7 +83,6 @@ struct imx_timer {
 	struct clk *clk_ipg;
 	const struct imx_gpt_data *gpt;
 	struct clock_event_device ced;
-	enum clock_event_mode cem;
 	struct irqaction act;
 };
 
@@ -212,18 +211,38 @@ static int v2_set_next_event(unsigned long evt,
 				-ETIME : 0;
 }
 
+static int mxc_shutdown(struct clock_event_device *ced)
+{
+	struct imx_timer *imxtm = to_imx_timer(ced);
+	unsigned long flags;
+	u32 tcn;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call mxc_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	imxtm->gpt->gpt_irq_disable(imxtm);
+
+	tcn = readl_relaxed(imxtm->base + imxtm->gpt->reg_tcn);
+	/* Set event time into far-far future */
+	writel_relaxed(tcn - 3, imxtm->base + imxtm->gpt->reg_tcmp);
+
+	/* Clear pending interrupt */
+	imxtm->gpt->gpt_irq_acknowledge(imxtm);
+
 #ifdef DEBUG
-static const char *clock_event_mode_label[] = {
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED",
-	[CLOCK_EVT_MODE_RESUME]   = "CLOCK_EVT_MODE_RESUME",
-};
+	printk(KERN_INFO "%s: changing mode\n", __func__);
 #endif /* DEBUG */
 
-static void mxc_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *ced)
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int mxc_set_oneshot(struct clock_event_device *ced)
 {
 	struct imx_timer *imxtm = to_imx_timer(ced);
 	unsigned long flags;
@@ -237,7 +256,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 	/* Disable interrupt in GPT module */
 	imxtm->gpt->gpt_irq_disable(imxtm);
 
-	if (mode != imxtm->cem) {
+	if (!clockevent_state_oneshot(ced)) {
 		u32 tcn = readl_relaxed(imxtm->base + imxtm->gpt->reg_tcn);
 		/* Set event time into far-far future */
 		writel_relaxed(tcn - 3, imxtm->base + imxtm->gpt->reg_tcmp);
@@ -247,37 +266,19 @@ static void mxc_set_mode(enum clock_event_mode mode,
 	}
 
 #ifdef DEBUG
-	printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[imxtm->cem],
-		clock_event_mode_label[mode]);
+	printk(KERN_INFO "%s: changing mode\n", __func__);
 #endif /* DEBUG */
 
-	/* Remember timer mode */
-	imxtm->cem = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
-				"supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
 	/*
 	 * Do not put overhead of interrupt enable/disable into
 	 * mxc_set_next_event(), the core has about 4 minutes
 	 * to call mxc_set_next_event() or shutdown clock after
 	 * mode switching
 	 */
-		local_irq_save(flags);
-		imxtm->gpt->gpt_irq_enable(imxtm);
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
+	imxtm->gpt->gpt_irq_enable(imxtm);
+	local_irq_restore(flags);
+
+	return 0;
 }
 
 /*
@@ -303,11 +304,11 @@ static int __init mxc_clockevent_init(struct imx_timer *imxtm)
 	struct clock_event_device *ced = &imxtm->ced;
 	struct irqaction *act = &imxtm->act;
 
-	imxtm->cem = CLOCK_EVT_MODE_UNUSED;
-
 	ced->name = "mxc_timer1";
 	ced->features = CLOCK_EVT_FEAT_ONESHOT;
-	ced->set_mode = mxc_set_mode;
+	ced->set_state_shutdown = mxc_shutdown;
+	ced->set_state_oneshot = mxc_set_oneshot;
+	ced->tick_resume = mxc_shutdown;
 	ced->set_next_event = imxtm->gpt->set_next_event;
 	ced->rating = 200;
 	ced->cpumask = cpumask_of(0);
-- 
1.9.1

[PATCH 55/74] clockevents/drivers/timer-sp804: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate timer-sp driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

There are few more changes worth noticing:

- The clockevent device was disabled by writing: 'TIMER_CTRL_32BIT |
  TIMER_CTRL_IE' to ctrl register earlier. i.e. by un-setting the
  TIMER_CTRL_ENABLE bit. Its done by writing zero now and should have
  the same effect.

- For shutdown and resume we were writing the same value twice to the
  register (to disable the timer), which is fixed now.

- Switching to oneshot mode was divided into two parts earlier:
  - Firstly set_mode() was writing:
    'TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ONESHOT'
    to ctrl register (device not enabled yet)
  - Then sp804_set_next_event() was enabling the device by writing
    'readl(ctrl) | TIMER_CTRL_ENABLE' to the ctrl register. This was
    unnecessarily complicated.
  - Change this to: Stop device on set_state_oneshot and configure it in
    sp804_set_next_event().

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-sp804.c | 54 +++++++++++++++++++--------------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index ca02503..5f45b9a 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -133,50 +133,50 @@ static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void sp804_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
+static inline void timer_shutdown(struct clock_event_device *evt)
 {
-	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+	writel(0, clkevt_base + TIMER_CTRL);
+}
 
-	writel(ctrl, clkevt_base + TIMER_CTRL);
+static int sp804_shutdown(struct clock_event_device *evt)
+{
+	timer_shutdown(evt);
+	return 0;
+}
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(clkevt_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= TIMER_CTRL_ONESHOT;
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		break;
-	}
+static int sp804_set_periodic(struct clock_event_device *evt)
+{
+	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+			     TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
 
+	timer_shutdown(evt);
+	writel(clkevt_reload, clkevt_base + TIMER_LOAD);
 	writel(ctrl, clkevt_base + TIMER_CTRL);
+	return 0;
 }
 
 static int sp804_set_next_event(unsigned long next,
 	struct clock_event_device *evt)
 {
-	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+			     TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE;
 
 	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+	writel(ctrl, clkevt_base + TIMER_CTRL);
 
 	return 0;
 }
 
 static struct clock_event_device sp804_clockevent = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
-		CLOCK_EVT_FEAT_DYNIRQ,
-	.set_mode	= sp804_set_mode,
-	.set_next_event	= sp804_set_next_event,
-	.rating		= 300,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_DYNIRQ,
+	.set_state_shutdown	= sp804_shutdown,
+	.set_state_periodic	= sp804_set_periodic,
+	.set_state_oneshot	= sp804_shutdown,
+	.tick_resume		= sp804_shutdown,
+	.set_next_event		= sp804_set_next_event,
+	.rating			= 300,
 };
 
 static struct irqaction sp804_timer_irq = {
-- 
1.9.1

[PATCH 56/74] clockevents/drivers/timer-atmel-pit: Fix typo in structure initialization

[Daniel Lezcano]

Reported-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/timer-atmel-pit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c
index 5875322..d911c5d 100644
--- a/drivers/clocksource/timer-atmel-pit.c
+++ b/drivers/clocksource/timer-atmel-pit.c
@@ -202,8 +202,8 @@ static void __init at91sam926x_pit_common_init(struct pit_data *data)
 	data->clksrc.mask = CLOCKSOURCE_MASK(bits);
 	data->clksrc.name = "pit";
 	data->clksrc.rating = 175;
-	data->clksrc.read = read_pit_clk,
-	data->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+	data->clksrc.read = read_pit_clk;
+	data->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 	clocksource_register_hz(&data->clksrc, pit_rate);
 
 	/* Set up irq handler */
-- 
1.9.1

[PATCH 57/74] clocksource/drivers/sh_tmu: Fix traceback spotted in -next

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Traceback in -next due to commit 'clockevents/drivers/sh_tmu: Migrate to new
'set-state' interface'.

Commit ("clockevents/drivers/sh_tmu: Migrate to new 'set-state' interface")
in -next causes the following traceback. This is seen with qemu runs for the sh
target.

------------[ cut here ]------------
WARNING: at drivers/clocksource/sh_tmu.c:202
Modules linked in:

CPU: 0 PID: 0 Comm: swapper Not tainted 4.2.0-rc3-next-20150720 #1
task: 8c411ed8 ti: 8c40e000 task.ti: 8c40e000
PC is at sh_tmu_disable+0x40/0x60
PR is at sh_tmu_clock_event_shutdown+0x8/0x20
PC  : 8c271220 SP  : 8c40ff10 SR  : 400081f1 TEA : 00000000
R0  : 8c271240 R1  : 8fc08cfc R2  : 00000000 R3  : 3fffffff
R4  : 8fc08c00 R5  : 00000001 R6  : 00000002 R7  : ffffffff
R8  : 00000001 R9  : 8fc08c20 R10 : 00000000 R11 : 00000000
R12 : 8c012820 R13 : 00000000 R14 : 00000000
MACH: 3b9ac9ff MACL: 80000000 GBR : 00000000 PR  : 8c271248

Call trace:
 [<8c065836>] clockevents_switch_state+0x16/0x60
 [<8c06588c>] clockevents_shutdown+0xc/0x40
 [<8c066330>] tick_check_new_device+0x90/0xc0
 [<8c065556>] clockevents_register_device+0x56/0x120
 [<8c0662a0>] tick_check_new_device+0x0/0xc0
 [<8c27167a>] sh_tmu_probe+0x29a/0x4e0
 [<8c18a994>] kasprintf+0x14/0x20
 [<8c442782>] early_platform_driver_probe+0x20e/0x2bc
 [<8c1fade0>] platform_match+0x0/0x100
 [<8c33babc>] printk+0x0/0x24
 [<8c434892>] start_kernel+0x32e/0x574
 [<8c33babc>] printk+0x0/0x24
 [<8c17d320>] strlen+0x0/0x58
 [<8c43430c>] unknown_bootoption+0x0/0x1e0
 [<8c011024>] _stext+0x24/0x30

---[ end trace cb88537fdc8fa200 ]---

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/clocksource/sh_tmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 43c9814..469e776 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -362,7 +362,8 @@ static int sh_tmu_clock_event_shutdown(struct clock_event_device *ced)
 {
 	struct sh_tmu_channel *ch = ced_to_sh_tmu(ced);
 
-	sh_tmu_disable(ch);
+	if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
+		sh_tmu_disable(ch);
 	return 0;
 }
 
-- 
1.9.1

[PATCH 58/74] clockevents/drivers/h8300_timer8: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate h8300_timer8 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/h8300_timer8.c | 51 +++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/drivers/clocksource/h8300_timer8.c b/drivers/clocksource/h8300_timer8.c
index 0214cb3..f9b3b70 100644
--- a/drivers/clocksource/h8300_timer8.c
+++ b/drivers/clocksource/h8300_timer8.c
@@ -81,7 +81,7 @@ static irqreturn_t timer8_interrupt(int irq, void *dev_id)
 	p->flags |= FLAG_IRQCONTEXT;
 	ctrl_outw(p->tcora, p->mapbase + TCORA);
 	if (!(p->flags & FLAG_SKIPEVENT)) {
-		if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT)
+		if (clockevent_state_oneshot(&p->ced))
 			ctrl_outw(0x0000, p->mapbase + _8TCR);
 		p->ced.event_handler(&p->ced);
 	}
@@ -169,29 +169,32 @@ static void timer8_clock_event_start(struct timer8_priv *p, int periodic)
 	timer8_set_next(p, periodic?(p->rate + HZ/2) / HZ:0x10000);
 }
 
-static void timer8_clock_event_mode(enum clock_event_mode mode,
-				    struct clock_event_device *ced)
+static int timer8_clock_event_shutdown(struct clock_event_device *ced)
+{
+	timer8_stop(ced_to_priv(ced));
+	return 0;
+}
+
+static int timer8_clock_event_periodic(struct clock_event_device *ced)
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		dev_info(&p->pdev->dev, "used for periodic clock events\n");
-		timer8_stop(p);
-		timer8_clock_event_start(p, PERIODIC);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		dev_info(&p->pdev->dev, "used for oneshot clock events\n");
-		timer8_stop(p);
-		timer8_clock_event_start(p, ONESHOT);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		timer8_stop(p);
-		break;
-	default:
-		break;
-	}
+	dev_info(&p->pdev->dev, "used for periodic clock events\n");
+	timer8_stop(p);
+	timer8_clock_event_start(p, PERIODIC);
+
+	return 0;
+}
+
+static int timer8_clock_event_oneshot(struct clock_event_device *ced)
+{
+	struct timer8_priv *p = ced_to_priv(ced);
+
+	dev_info(&p->pdev->dev, "used for oneshot clock events\n");
+	timer8_stop(p);
+	timer8_clock_event_start(p, ONESHOT);
+
+	return 0;
 }
 
 static int timer8_clock_event_next(unsigned long delta,
@@ -199,7 +202,7 @@ static int timer8_clock_event_next(unsigned long delta,
 {
 	struct timer8_priv *p = ced_to_priv(ced);
 
-	BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+	BUG_ON(!clockevent_state_oneshot(ced));
 	timer8_set_next(p, delta - 1);
 
 	return 0;
@@ -246,7 +249,9 @@ static int timer8_setup(struct timer8_priv *p,
 	p->ced.rating = 200;
 	p->ced.cpumask = cpumask_of(0);
 	p->ced.set_next_event = timer8_clock_event_next;
-	p->ced.set_mode = timer8_clock_event_mode;
+	p->ced.set_state_shutdown = timer8_clock_event_shutdown;
+	p->ced.set_state_periodic = timer8_clock_event_periodic;
+	p->ced.set_state_oneshot = timer8_clock_event_oneshot;
 
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret < 0) {
-- 
1.9.1

[PATCH 59/74] alpha/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate alpha driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

rtc clockevent device wasn't doing anything in set-mode and so its
set-state callbacks aren't implemented.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/alpha/kernel/time.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 643a9dc..5b6202a 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -93,7 +93,7 @@ rtc_timer_interrupt(int irq, void *dev)
 	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
 
 	/* Don't run the hook for UNUSED or SHUTDOWN.  */
-	if (likely(ce->mode == CLOCK_EVT_MODE_PERIODIC))
+	if (likely(clockevent_state_periodic(ce)))
 		ce->event_handler(ce);
 
 	if (test_irq_work_pending()) {
@@ -104,13 +104,6 @@ rtc_timer_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static void
-rtc_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
-{
-	/* The mode member of CE is updated in generic code.
-	   Since we only support periodic events, nothing to do.  */
-}
-
 static int
 rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
 {
@@ -129,7 +122,6 @@ init_rtc_clockevent(void)
 		.features = CLOCK_EVT_FEAT_PERIODIC,
 		.rating = 100,
 		.cpumask = cpumask_of(cpu),
-		.set_mode = rtc_ce_set_mode,
 		.set_next_event = rtc_ce_set_next_event,
 	};
 
@@ -161,12 +153,12 @@ static struct clocksource qemu_cs = {
  * The QEMU alarm as a clock_event_device primitive.
  */
 
-static void
-qemu_ce_set_mode(enum clock_event_mode mode, struct clock_event_device *ce)
+static int qemu_ce_shutdown(struct clock_event_device *ce)
 {
 	/* The mode member of CE is updated for us in generic code.
 	   Just make sure that the event is disabled.  */
 	qemu_set_alarm_abs(0);
+	return 0;
 }
 
 static int
@@ -197,7 +189,9 @@ init_qemu_clockevent(void)
 		.features = CLOCK_EVT_FEAT_ONESHOT,
 		.rating = 400,
 		.cpumask = cpumask_of(cpu),
-		.set_mode = qemu_ce_set_mode,
+		.set_state_shutdown = qemu_ce_shutdown,
+		.set_state_oneshot = qemu_ce_shutdown,
+		.tick_resume = qemu_ce_shutdown,
 		.set_next_event = qemu_ce_set_next_event,
 	};
 
-- 
1.9.1

[PATCH 60/74] blackfin/time-ts: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate blackfin driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in ->set_mode(RESUME) and so tick_resume()
isn't implemented.

Cc: Steven Miao <realmz6@gmail.com>
Cc: adi-buildroot-devel@lists.sourceforge.net
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/blackfin/kernel/time-ts.c | 136 +++++++++++++++++++++--------------------
 1 file changed, 70 insertions(+), 66 deletions(-)

diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index cb0a484..fb9e95f 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -136,44 +136,44 @@ static int bfin_gptmr0_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void bfin_gptmr0_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static int bfin_gptmr0_set_periodic(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC: {
 #ifndef CONFIG_BF60x
-		set_gptimer_config(TIMER0_id, \
-			TIMER_OUT_DIS | TIMER_IRQ_ENA | \
-			TIMER_PERIOD_CNT | TIMER_MODE_PWM);
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_IRQ_ENA |
+			   TIMER_PERIOD_CNT | TIMER_MODE_PWM);
 #else
-		set_gptimer_config(TIMER0_id,  TIMER_OUT_DIS
-			| TIMER_MODE_PWM_CONT | TIMER_PULSE_HI | TIMER_IRQ_PER);
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_MODE_PWM_CONT |
+			   TIMER_PULSE_HI | TIMER_IRQ_PER);
 #endif
 
-		set_gptimer_period(TIMER0_id, get_sclk() / HZ);
-		set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
-		enable_gptimers(TIMER0bit);
-		break;
-	}
-	case CLOCK_EVT_MODE_ONESHOT:
-		disable_gptimers(TIMER0bit);
+	set_gptimer_period(TIMER0_id, get_sclk() / HZ);
+	set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1);
+	enable_gptimers(TIMER0bit);
+	return 0;
+}
+
+static int bfin_gptmr0_set_oneshot(struct clock_event_device *evt)
+{
+	disable_gptimers(TIMER0bit);
 #ifndef CONFIG_BF60x
-		set_gptimer_config(TIMER0_id, \
-			TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM);
 #else
-		set_gptimer_config(TIMER0_id, TIMER_OUT_DIS | TIMER_MODE_PWM
-			| TIMER_PULSE_HI | TIMER_IRQ_WID_DLY);
+	set_gptimer_config(TIMER0_id,
+			   TIMER_OUT_DIS | TIMER_MODE_PWM | TIMER_PULSE_HI |
+			   TIMER_IRQ_WID_DLY);
 #endif
 
-		set_gptimer_period(TIMER0_id, 0);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		disable_gptimers(TIMER0bit);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	set_gptimer_period(TIMER0_id, 0);
+	return 0;
+}
+
+static int bfin_gptmr0_shutdown(struct clock_event_device *evt)
+{
+	disable_gptimers(TIMER0bit);
+	return 0;
 }
 
 static void bfin_gptmr0_ack(void)
@@ -211,13 +211,16 @@ static struct irqaction gptmr0_irq = {
 };
 
 static struct clock_event_device clockevent_gptmr0 = {
-	.name		= "bfin_gptimer0",
-	.rating		= 300,
-	.irq		= IRQ_TIMER0,
-	.shift		= 32,
-	.features 	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = bfin_gptmr0_set_next_event,
-	.set_mode	= bfin_gptmr0_set_mode,
+	.name			= "bfin_gptimer0",
+	.rating			= 300,
+	.irq			= IRQ_TIMER0,
+	.shift			= 32,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event		= bfin_gptmr0_set_next_event,
+	.set_state_shutdown	= bfin_gptmr0_shutdown,
+	.set_state_periodic	= bfin_gptmr0_set_periodic,
+	.set_state_oneshot	= bfin_gptmr0_set_oneshot,
 };
 
 static void __init bfin_gptmr0_clockevent_init(struct clock_event_device *evt)
@@ -250,36 +253,35 @@ static int bfin_coretmr_set_next_event(unsigned long cycles,
 	return 0;
 }
 
-static void bfin_coretmr_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static int bfin_coretmr_set_periodic(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC: {
-		unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
-		bfin_write_TCNTL(TMPWR);
-		CSYNC();
-		bfin_write_TSCALE(TIME_SCALE - 1);
-		bfin_write_TPERIOD(tcount);
-		bfin_write_TCOUNT(tcount);
-		CSYNC();
-		bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
-		break;
-	}
-	case CLOCK_EVT_MODE_ONESHOT:
-		bfin_write_TCNTL(TMPWR);
-		CSYNC();
-		bfin_write_TSCALE(TIME_SCALE - 1);
-		bfin_write_TPERIOD(0);
-		bfin_write_TCOUNT(0);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		bfin_write_TCNTL(0);
-		CSYNC();
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+	bfin_write_TSCALE(TIME_SCALE - 1);
+	bfin_write_TPERIOD(tcount);
+	bfin_write_TCOUNT(tcount);
+	CSYNC();
+	bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
+	return 0;
+}
+
+static int bfin_coretmr_set_oneshot(struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(TMPWR);
+	CSYNC();
+	bfin_write_TSCALE(TIME_SCALE - 1);
+	bfin_write_TPERIOD(0);
+	bfin_write_TCOUNT(0);
+	return 0;
+}
+
+static int bfin_coretmr_shutdown(struct clock_event_device *evt)
+{
+	bfin_write_TCNTL(0);
+	CSYNC();
+	return 0;
 }
 
 void bfin_coretmr_init(void)
@@ -335,7 +337,9 @@ void bfin_coretmr_clockevent_init(void)
 	evt->shift = 32;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->set_next_event = bfin_coretmr_set_next_event;
-	evt->set_mode = bfin_coretmr_set_mode;
+	evt->set_state_shutdown = bfin_coretmr_shutdown;
+	evt->set_state_periodic = bfin_coretmr_set_periodic;
+	evt->set_state_oneshot = bfin_coretmr_set_oneshot;
 
 	clock_tick = get_cclk() / TIME_SCALE;
 	evt->mult = div_sc(clock_tick, NSEC_PER_SEC, evt->shift);
-- 
1.9.1

[PATCH 61/74] c6x/timer64: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate c6x driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in ->set_mode(RESUME) and so tick_resume()
isn't implemented.

Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: linux-c6x-dev@linux-c6x.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/c6x/platforms/timer64.c | 52 +++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 25 deletions(-)

diff --git a/arch/c6x/platforms/timer64.c b/arch/c6x/platforms/timer64.c
index 3c73d74..c19901e 100644
--- a/arch/c6x/platforms/timer64.c
+++ b/arch/c6x/platforms/timer64.c
@@ -126,35 +126,37 @@ static int next_event(unsigned long delta,
 	return 0;
 }
 
-static void set_clock_mode(enum clock_event_mode mode,
-			   struct clock_event_device *evt)
+static int set_periodic(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		timer64_enable();
-		timer64_mode = TIMER64_MODE_PERIODIC;
-		timer64_config(TIMER64_RATE / HZ);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		timer64_enable();
-		timer64_mode = TIMER64_MODE_ONE_SHOT;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		timer64_mode = TIMER64_MODE_DISABLED;
-		timer64_disable();
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	timer64_enable();
+	timer64_mode = TIMER64_MODE_PERIODIC;
+	timer64_config(TIMER64_RATE / HZ);
+	return 0;
+}
+
+static int set_oneshot(struct clock_event_device *evt)
+{
+	timer64_enable();
+	timer64_mode = TIMER64_MODE_ONE_SHOT;
+	return 0;
+}
+
+static int shutdown(struct clock_event_device *evt)
+{
+	timer64_mode = TIMER64_MODE_DISABLED;
+	timer64_disable();
+	return 0;
 }
 
 static struct clock_event_device t64_clockevent_device = {
-	.name		= "TIMER64_EVT32_TIMER",
-	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.rating		= 200,
-	.set_mode	= set_clock_mode,
-	.set_next_event	= next_event,
+	.name			= "TIMER64_EVT32_TIMER",
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.rating			= 200,
+	.set_state_shutdown	= shutdown,
+	.set_state_periodic	= set_periodic,
+	.set_state_oneshot	= set_oneshot,
+	.set_next_event		= next_event,
 };
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
-- 
1.9.1

[PATCH 62/74] microblaze/timer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate microblaze driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in ->set_mode(RESUME or ONESHOT) and so
tick_resume() set_state_oneshot() aren't implemented.

Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/microblaze/kernel/timer.c | 46 +++++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 27 deletions(-)

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index c897745..67e2ef4 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -122,37 +122,29 @@ static int xilinx_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void xilinx_timer_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
+static int xilinx_timer_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pr_info("%s: periodic\n", __func__);
-		xilinx_timer0_start_periodic(freq_div_hz);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		pr_info("%s: oneshot\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-		pr_info("%s: unused\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		pr_info("%s: shutdown\n", __func__);
-		xilinx_timer0_stop();
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		pr_info("%s: resume\n", __func__);
-		break;
-	}
+	pr_info("%s\n", __func__);
+	xilinx_timer0_stop();
+	return 0;
+}
+
+static int xilinx_timer_set_periodic(struct clock_event_device *evt)
+{
+	pr_info("%s\n", __func__);
+	xilinx_timer0_start_periodic(freq_div_hz);
+	return 0;
 }
 
 static struct clock_event_device clockevent_xilinx_timer = {
-	.name		= "xilinx_clockevent",
-	.features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 8,
-	.rating		= 300,
-	.set_next_event	= xilinx_timer_set_next_event,
-	.set_mode	= xilinx_timer_set_mode,
+	.name			= "xilinx_clockevent",
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC,
+	.shift			= 8,
+	.rating			= 300,
+	.set_next_event		= xilinx_timer_set_next_event,
+	.set_state_shutdown	= xilinx_timer_shutdown,
+	.set_state_periodic	= xilinx_timer_set_periodic,
 };
 
 static inline void timer_ack(void)
-- 
1.9.1

[PATCH 63/74] mn10300/cevt-mn10300: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate mn10300 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: linux-am33-list@redhat.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/mn10300/kernel/cevt-mn10300.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c
index 60f64ca..3aae9f5 100644
--- a/arch/mn10300/kernel/cevt-mn10300.c
+++ b/arch/mn10300/kernel/cevt-mn10300.c
@@ -41,12 +41,6 @@ static int next_event(unsigned long delta,
 	return 0;
 }
 
-static void set_clock_mode(enum clock_event_mode mode,
-			   struct clock_event_device *evt)
-{
-	/* Nothing to do ...  */
-}
-
 static DEFINE_PER_CPU(struct clock_event_device, mn10300_clockevent_device);
 static DEFINE_PER_CPU(struct irqaction, timer_irq);
 
@@ -108,7 +102,6 @@ int __init init_clockevents(void)
 
 	cd->rating		= 200;
 	cd->cpumask		= cpumask_of(smp_processor_id());
-	cd->set_mode		= set_clock_mode;
 	cd->event_handler	= event_handler;
 	cd->set_next_event	= next_event;
 
-- 
1.9.1

[PATCH 64/74] openrisc/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate openrisc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: Jonas Bonn <jonas@southpole.se>
Cc: linux@lists.openrisc.net
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/openrisc/kernel/time.c | 24 ------------------------
 1 file changed, 24 deletions(-)

diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c
index 7c52e94..50e9701 100644
--- a/arch/openrisc/kernel/time.c
+++ b/arch/openrisc/kernel/time.c
@@ -48,29 +48,6 @@ static int openrisc_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void openrisc_timer_set_mode(enum clock_event_mode mode,
-				    struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pr_debug(KERN_INFO "%s: periodic\n", __func__);
-		BUG();
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		pr_debug(KERN_INFO "%s: oneshot\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-		pr_debug(KERN_INFO "%s: unused\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		pr_debug(KERN_INFO "%s: shutdown\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		pr_debug(KERN_INFO "%s: resume\n", __func__);
-		break;
-	}
-}
-
 /* This is the clock event device based on the OR1K tick timer.
  * As the timer is being used as a continuous clock-source (required for HR
  * timers) we cannot enable the PERIODIC feature.  The tick timer can run using
@@ -82,7 +59,6 @@ static struct clock_event_device clockevent_openrisc_timer = {
 	.features = CLOCK_EVT_FEAT_ONESHOT,
 	.rating = 300,
 	.set_next_event = openrisc_timer_set_next_event,
-	.set_mode = openrisc_timer_set_mode,
 };
 
 static inline void timer_ack(void)
-- 
1.9.1

[PATCH 65/74] powerpc/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate powerpc driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in ->set_mode(ONSHOT) and so
set_state_oneshot() isn't implemented.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/powerpc/kernel/time.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 4392250..1be1092 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -99,16 +99,17 @@ static struct clocksource clocksource_timebase = {
 
 static int decrementer_set_next_event(unsigned long evt,
 				      struct clock_event_device *dev);
-static void decrementer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *dev);
+static int decrementer_shutdown(struct clock_event_device *evt);
 
 struct clock_event_device decrementer_clockevent = {
-	.name           = "decrementer",
-	.rating         = 200,
-	.irq            = 0,
-	.set_next_event = decrementer_set_next_event,
-	.set_mode       = decrementer_set_mode,
-	.features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP,
+	.name			= "decrementer",
+	.rating			= 200,
+	.irq			= 0,
+	.set_next_event		= decrementer_set_next_event,
+	.set_state_shutdown	= decrementer_shutdown,
+	.tick_resume		= decrementer_shutdown,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_C3STOP,
 };
 EXPORT_SYMBOL(decrementer_clockevent);
 
@@ -862,11 +863,10 @@ static int decrementer_set_next_event(unsigned long evt,
 	return 0;
 }
 
-static void decrementer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *dev)
+static int decrementer_shutdown(struct clock_event_device *dev)
 {
-	if (mode != CLOCK_EVT_MODE_ONESHOT)
-		decrementer_set_next_event(DECREMENTER_MAX, dev);
+	decrementer_set_next_event(DECREMENTER_MAX, dev);
+	return 0;
 }
 
 /* Interrupt handler for the timer broadcast IPI */
-- 
1.9.1

[PATCH 66/74] s390/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate s390 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/s390/kernel/time.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 9e733d9..0a90d17 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -117,11 +117,6 @@ static int s390_next_event(unsigned long delta,
 	return 0;
 }
 
-static void s390_set_mode(enum clock_event_mode mode,
-			  struct clock_event_device *evt)
-{
-}
-
 /*
  * Set up lowcore and control register of the current cpu to
  * enable TOD clock and clock comparator interrupts.
@@ -145,7 +140,6 @@ void init_cpu_timer(void)
 	cd->rating		= 400;
 	cd->cpumask		= cpumask_of(cpu);
 	cd->set_next_event	= s390_next_event;
-	cd->set_mode		= s390_set_mode;
 
 	clockevents_register_device(cd);
 
-- 
1.9.1

[PATCH 67/74] score/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate score driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in ONESHOT/SHUTDOWN/RESUME modes and so
callbacks for them aren't implemented.

Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/score/kernel/time.c | 31 ++++++++++---------------------
 1 file changed, 10 insertions(+), 21 deletions(-)

diff --git a/arch/score/kernel/time.c b/arch/score/kernel/time.c
index 24770cd..679b8d7 100644
--- a/arch/score/kernel/time.c
+++ b/arch/score/kernel/time.c
@@ -55,31 +55,20 @@ static int score_timer_set_next_event(unsigned long delta,
 	return 0;
 }
 
-static void score_timer_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *evdev)
+static int score_timer_set_periodic(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
-		outl(SYSTEM_CLOCK/HZ, P_TIMER0_PRELOAD);
-		outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_UNUSED:
-		break;
-	default:
-		BUG();
-	}
+	outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
+	outl(SYSTEM_CLOCK / HZ, P_TIMER0_PRELOAD);
+	outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
+	return 0;
 }
 
 static struct clock_event_device score_clockevent = {
-	.name		= "score_clockevent",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 16,
-	.set_next_event	= score_timer_set_next_event,
-	.set_mode	= score_timer_set_mode,
+	.name			= "score_clockevent",
+	.features		= CLOCK_EVT_FEAT_PERIODIC,
+	.shift			= 16,
+	.set_next_event		= score_timer_set_next_event,
+	.set_state_periodic	= score_timer_set_periodic,
 };
 
 void __init time_init(void)
-- 
1.9.1

[PATCH 68/74] sh/localtimer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sh driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in the ->set_mode() callback. So, this patch
doesn't provide any set-state callbacks.

Cc: linux-sh@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/sh/kernel/localtimer.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c
index b880a7e..cbb7d46 100644
--- a/arch/sh/kernel/localtimer.c
+++ b/arch/sh/kernel/localtimer.c
@@ -39,11 +39,6 @@ void local_timer_interrupt(void)
 	irq_exit();
 }
 
-static void dummy_timer_set_mode(enum clock_event_mode mode,
-				 struct clock_event_device *clk)
-{
-}
-
 void local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
@@ -54,7 +49,6 @@ void local_timer_setup(unsigned int cpu)
 				  CLOCK_EVT_FEAT_DUMMY;
 	clk->rating		= 400;
 	clk->mult		= 1;
-	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;
 	clk->cpumask		= cpumask_of(cpu);
 
-- 
1.9.1

[PATCH 69/74] sparc/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate sparc drivers to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything which switching to few clockevent modes and so
their callbacks aren't implemented.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/sparc/kernel/sun4m_smp.c |  2 +-
 arch/sparc/kernel/time_32.c   | 57 ++++++++++++++++++++-----------------------
 arch/sparc/kernel/time_64.c   | 33 ++++++++-----------------
 3 files changed, 38 insertions(+), 54 deletions(-)

diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index d3408e7..278c40a 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -247,7 +247,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs)
 
 	ce = &per_cpu(sparc32_clockevent, cpu);
 
-	if (ce->mode & CLOCK_EVT_MODE_PERIODIC)
+	if (clockevent_state_periodic(ce))
 		sun4m_clear_profile_irq(cpu);
 	else
 		sparc_config.load_profile_irq(cpu, 0); /* Is this needless? */
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index c9692f3..1affabc 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -101,21 +101,18 @@ irqreturn_t notrace timer_interrupt(int dummy, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void timer_ce_set_mode(enum clock_event_mode mode,
-			      struct clock_event_device *evt)
+static int timer_ce_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-		case CLOCK_EVT_MODE_PERIODIC:
-		case CLOCK_EVT_MODE_RESUME:
-			timer_ce_enabled = 1;
-			break;
-		case CLOCK_EVT_MODE_SHUTDOWN:
-			timer_ce_enabled = 0;
-			break;
-		default:
-			break;
-	}
+	timer_ce_enabled = 0;
+	smp_mb();
+	return 0;
+}
+
+static int timer_ce_set_periodic(struct clock_event_device *evt)
+{
+	timer_ce_enabled = 1;
 	smp_mb();
+	return 0;
 }
 
 static __init void setup_timer_ce(void)
@@ -127,7 +124,9 @@ static __init void setup_timer_ce(void)
 	ce->name     = "timer_ce";
 	ce->rating   = 100;
 	ce->features = CLOCK_EVT_FEAT_PERIODIC;
-	ce->set_mode = timer_ce_set_mode;
+	ce->set_state_shutdown = timer_ce_shutdown;
+	ce->set_state_periodic = timer_ce_set_periodic;
+	ce->tick_resume = timer_ce_set_periodic;
 	ce->cpumask  = cpu_possible_mask;
 	ce->shift    = 32;
 	ce->mult     = div_sc(sparc_config.clock_rate, NSEC_PER_SEC,
@@ -183,24 +182,20 @@ static __init int setup_timer_cs(void)
 }
 
 #ifdef CONFIG_SMP
-static void percpu_ce_setup(enum clock_event_mode mode,
-			struct clock_event_device *evt)
+static int percpu_ce_shutdown(struct clock_event_device *evt)
 {
 	int cpu = cpumask_first(evt->cpumask);
 
-	switch (mode) {
-		case CLOCK_EVT_MODE_PERIODIC:
-			sparc_config.load_profile_irq(cpu,
-						      SBUS_CLOCK_RATE / HZ);
-			break;
-		case CLOCK_EVT_MODE_ONESHOT:
-		case CLOCK_EVT_MODE_SHUTDOWN:
-		case CLOCK_EVT_MODE_UNUSED:
-			sparc_config.load_profile_irq(cpu, 0);
-			break;
-		default:
-			break;
-	}
+	sparc_config.load_profile_irq(cpu, 0);
+	return 0;
+}
+
+static int percpu_ce_set_periodic(struct clock_event_device *evt)
+{
+	int cpu = cpumask_first(evt->cpumask);
+
+	sparc_config.load_profile_irq(cpu, SBUS_CLOCK_RATE / HZ);
+	return 0;
 }
 
 static int percpu_ce_set_next_event(unsigned long delta,
@@ -224,7 +219,9 @@ void register_percpu_ce(int cpu)
 	ce->name           = "percpu_ce";
 	ce->rating         = 200;
 	ce->features       = features;
-	ce->set_mode       = percpu_ce_setup;
+	ce->set_state_shutdown = percpu_ce_shutdown;
+	ce->set_state_periodic = percpu_ce_set_periodic;
+	ce->set_state_oneshot = percpu_ce_shutdown;
 	ce->set_next_event = percpu_ce_set_next_event;
 	ce->cpumask        = cpumask_of(cpu);
 	ce->shift          = 32;
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 2e6035c..c69b21e 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -674,32 +674,19 @@ static int sparc64_next_event(unsigned long delta,
 	return tick_ops->add_compare(delta) ? -ETIME : 0;
 }
 
-static void sparc64_timer_setup(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		tick_ops->disable_irq();
-		break;
-
-	case CLOCK_EVT_MODE_PERIODIC:
-	case CLOCK_EVT_MODE_UNUSED:
-		WARN_ON(1);
-		break;
-	}
+static int sparc64_timer_shutdown(struct clock_event_device *evt)
+{
+	tick_ops->disable_irq();
+	return 0;
 }
 
 static struct clock_event_device sparc64_clockevent = {
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= sparc64_timer_setup,
-	.set_next_event	= sparc64_next_event,
-	.rating		= 100,
-	.shift		= 30,
-	.irq		= -1,
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= sparc64_timer_shutdown,
+	.set_next_event		= sparc64_next_event,
+	.rating			= 100,
+	.shift			= 30,
+	.irq			= -1,
 };
 static DEFINE_PER_CPU(struct clock_event_device, sparc64_events);
 
-- 
1.9.1

[PATCH 70/74] um/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate um driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: user-mode-linux-user@lists.sourceforge.net
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/um/kernel/time.c | 44 ++++++++++++++++++++------------------------
 1 file changed, 20 insertions(+), 24 deletions(-)

diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 117568d..5af441e 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -22,23 +22,16 @@ void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 	local_irq_restore(flags);
 }
 
-static void itimer_set_mode(enum clock_event_mode mode,
-			    struct clock_event_device *evt)
+static int itimer_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		set_interval();
-		break;
-
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_ONESHOT:
-		disable_timer();
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
+	disable_timer();
+	return 0;
+}
+
+static int itimer_set_periodic(struct clock_event_device *evt)
+{
+	set_interval();
+	return 0;
 }
 
 static int itimer_next_event(unsigned long delta,
@@ -48,14 +41,17 @@ static int itimer_next_event(unsigned long delta,
 }
 
 static struct clock_event_device itimer_clockevent = {
-	.name		= "itimer",
-	.rating		= 250,
-	.cpumask	= cpu_all_mask,
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= itimer_set_mode,
-	.set_next_event = itimer_next_event,
-	.shift		= 32,
-	.irq		= 0,
+	.name			= "itimer",
+	.rating			= 250,
+	.cpumask		= cpu_all_mask,
+	.features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= itimer_shutdown,
+	.set_state_periodic	= itimer_set_periodic,
+	.set_state_oneshot	= itimer_shutdown,
+	.set_next_event		= itimer_next_event,
+	.shift			= 32,
+	.irq			= 0,
 };
 
 static irqreturn_t um_timer(int irq, void *dev)
-- 
1.9.1

[PATCH 71/74] unicore/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate unicore driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything for PERIODIC or RESUME modes and so their
callbacks aren't implemented.

Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/unicore32/kernel/time.c | 29 ++++++++++-------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
index d3824b2..ac4c544 100644
--- a/arch/unicore32/kernel/time.c
+++ b/arch/unicore32/kernel/time.c
@@ -46,29 +46,20 @@ puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
 
-static void
-puv3_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
+static int puv3_osmr0_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
-		writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
-		break;
-
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_PERIODIC:
-		break;
-	}
+	writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
+	writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
+	return 0;
 }
 
 static struct clock_event_device ckevt_puv3_osmr0 = {
-	.name		= "osmr0",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.rating		= 200,
-	.set_next_event	= puv3_osmr0_set_next_event,
-	.set_mode	= puv3_osmr0_set_mode,
+	.name			= "osmr0",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 200,
+	.set_next_event		= puv3_osmr0_set_next_event,
+	.set_state_shutdown	= puv3_osmr0_shutdown,
+	.set_state_oneshot	= puv3_osmr0_shutdown,
 };
 
 static cycle_t puv3_read_oscr(struct clocksource *cs)
-- 
1.9.1

[PATCH 72/74] xtensa/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate xtensa driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/xtensa/kernel/time.c | 53 +++++++++++++++++++++++------------------------
 1 file changed, 26 insertions(+), 27 deletions(-)

diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 2a1823d..b97767d 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -52,8 +52,6 @@ static struct clocksource ccount_clocksource = {
 
 static int ccount_timer_set_next_event(unsigned long delta,
 		struct clock_event_device *dev);
-static void ccount_timer_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *evt);
 struct ccount_timer {
 	struct clock_event_device evt;
 	int irq_enabled;
@@ -77,35 +75,34 @@ static int ccount_timer_set_next_event(unsigned long delta,
 	return ret;
 }
 
-static void ccount_timer_set_mode(enum clock_event_mode mode,
-		struct clock_event_device *evt)
+/*
+ * There is no way to disable the timer interrupt at the device level,
+ * only at the intenable register itself. Since enable_irq/disable_irq
+ * calls are nested, we need to make sure that these calls are
+ * balanced.
+ */
+static int ccount_timer_shutdown(struct clock_event_device *evt)
+{
+	struct ccount_timer *timer =
+		container_of(evt, struct ccount_timer, evt);
+
+	if (timer->irq_enabled) {
+		disable_irq(evt->irq);
+		timer->irq_enabled = 0;
+	}
+	return 0;
+}
+
+static int ccount_timer_set_oneshot(struct clock_event_device *evt)
 {
 	struct ccount_timer *timer =
 		container_of(evt, struct ccount_timer, evt);
 
-	/*
-	 * There is no way to disable the timer interrupt at the device level,
-	 * only at the intenable register itself. Since enable_irq/disable_irq
-	 * calls are nested, we need to make sure that these calls are
-	 * balanced.
-	 */
-	switch (mode) {
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		if (timer->irq_enabled) {
-			disable_irq(evt->irq);
-			timer->irq_enabled = 0;
-		}
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-	case CLOCK_EVT_MODE_ONESHOT:
-		if (!timer->irq_enabled) {
-			enable_irq(evt->irq);
-			timer->irq_enabled = 1;
-		}
-	default:
-		break;
+	if (!timer->irq_enabled) {
+		enable_irq(evt->irq);
+		timer->irq_enabled = 1;
 	}
+	return 0;
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id);
@@ -126,7 +123,9 @@ void local_timer_setup(unsigned cpu)
 	clockevent->features = CLOCK_EVT_FEAT_ONESHOT;
 	clockevent->rating = 300;
 	clockevent->set_next_event = ccount_timer_set_next_event;
-	clockevent->set_mode = ccount_timer_set_mode;
+	clockevent->set_state_shutdown = ccount_timer_shutdown;
+	clockevent->set_state_oneshot = ccount_timer_set_oneshot;
+	clockevent->tick_resume = ccount_timer_set_oneshot;
 	clockevent->cpumask = cpumask_of(cpu);
 	clockevent->irq = irq_create_mapping(NULL, LINUX_TIMER_INT);
 	if (WARN(!clockevent->irq, "error: can't map timer irq"))
-- 
1.9.1

[PATCH 73/74] kernel: broadcast-hrtimer: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate broadcast-hrtimer driver to the new 'set-state' interface
provided by clockevents core, the earlier 'set-mode' interface is marked
obsolete now.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 kernel/time/tick-broadcast-hrtimer.c | 49 +++++++++++++++---------------------
 1 file changed, 20 insertions(+), 29 deletions(-)

diff --git a/kernel/time/tick-broadcast-hrtimer.c b/kernel/time/tick-broadcast-hrtimer.c
index 3e7db49..53d7184 100644
--- a/kernel/time/tick-broadcast-hrtimer.c
+++ b/kernel/time/tick-broadcast-hrtimer.c
@@ -18,30 +18,23 @@
 
 static struct hrtimer bctimer;
 
-static void bc_set_mode(enum clock_event_mode mode,
-			struct clock_event_device *bc)
+static int bc_shutdown(struct clock_event_device *evt)
 {
-	switch (mode) {
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		/*
-		 * Note, we cannot cancel the timer here as we might
-		 * run into the following live lock scenario:
-		 *
-		 * cpu 0		cpu1
-		 * lock(broadcast_lock);
-		 *			hrtimer_interrupt()
-		 *			bc_handler()
-		 *			   tick_handle_oneshot_broadcast();
-		 *			    lock(broadcast_lock);
-		 * hrtimer_cancel()
-		 *  wait_for_callback()
-		 */
-		hrtimer_try_to_cancel(&bctimer);
-		break;
-	default:
-		break;
-	}
+	/*
+	 * Note, we cannot cancel the timer here as we might
+	 * run into the following live lock scenario:
+	 *
+	 * cpu 0		cpu1
+	 * lock(broadcast_lock);
+	 *			hrtimer_interrupt()
+	 *			bc_handler()
+	 *			   tick_handle_oneshot_broadcast();
+	 *			    lock(broadcast_lock);
+	 * hrtimer_cancel()
+	 *  wait_for_callback()
+	 */
+	hrtimer_try_to_cancel(&bctimer);
+	return 0;
 }
 
 /*
@@ -82,7 +75,7 @@ static int bc_set_next(ktime_t expires, struct clock_event_device *bc)
 }
 
 static struct clock_event_device ce_broadcast_hrtimer = {
-	.set_mode		= bc_set_mode,
+	.set_state_shutdown	= bc_shutdown,
 	.set_next_ktime		= bc_set_next,
 	.features		= CLOCK_EVT_FEAT_ONESHOT |
 				  CLOCK_EVT_FEAT_KTIME |
@@ -102,13 +95,11 @@ static enum hrtimer_restart bc_handler(struct hrtimer *t)
 {
 	ce_broadcast_hrtimer.event_handler(&ce_broadcast_hrtimer);
 
-	switch (ce_broadcast_hrtimer.mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
+	if (clockevent_state_oneshot(&ce_broadcast_hrtimer))
 		if (ce_broadcast_hrtimer.next_event.tv64 != KTIME_MAX)
 			return HRTIMER_RESTART;
-	default:
-		return HRTIMER_NORESTART;
-	}
+
+	return HRTIMER_NORESTART;
 }
 
 void tick_setup_hrtimer_broadcast(void)
-- 
1.9.1

[PATCH 74/74] cris/time: Migrate to new 'set-state' interface

[Daniel Lezcano]

From: Viresh Kumar <viresh.kumar@linaro.org>

Migrate cris driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-cris-kernel@axis.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 arch/cris/arch-v32/kernel/time.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 4fce9f1..d2a8440 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -172,8 +172,7 @@ void handle_watchdog_bite(struct pt_regs *regs)
 extern void cris_profile_sample(struct pt_regs *regs);
 static void __iomem *timer_base;
 
-static void crisv32_clkevt_mode(enum clock_event_mode mode,
-				struct clock_event_device *dev)
+static int crisv32_clkevt_switch_state(struct clock_event_device *dev)
 {
 	reg_timer_rw_tmr0_ctrl ctrl = {
 		.op = regk_timer_hold,
@@ -181,6 +180,7 @@ static void crisv32_clkevt_mode(enum clock_event_mode mode,
 	};
 
 	REG_WR(timer, timer_base, rw_tmr0_ctrl, ctrl);
+	return 0;
 }
 
 static int crisv32_clkevt_next_event(unsigned long evt,
@@ -231,7 +231,9 @@ static struct clock_event_device crisv32_clockevent = {
 	.name = "crisv32-timer",
 	.rating = 300,
 	.features = CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode = crisv32_clkevt_mode,
+	.set_state_oneshot = crisv32_clkevt_switch_state,
+	.set_state_shutdown = crisv32_clkevt_switch_state,
+	.tick_resume = crisv32_clkevt_switch_state,
 	.set_next_event = crisv32_clkevt_next_event,
 };
 
-- 
1.9.1

Re: [PATCH 42/74] clockevents/drivers/keystone: Migrate to new 'set-state' interface

[santosh.shilimkar]

On 8/10/15 2:51 AM, Daniel Lezcano wrote:
> From: Viresh Kumar <viresh.kumar@linaro.org>
>
> Migrate keystone driver to the new 'set-state' interface provided by
> clockevents core, the earlier 'set-mode' interface is marked obsolete
> now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> Also pass the mode-mask to keystone_timer_config() instead of the mode
> as mode macro's aren't valid anymore.
>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>

Re: [PATCH 03/74] clockevents/drivers/bcm2835: Migrate to new 'set-state' interface

[Lee Jones]

On Mon, 10 Aug 2015, Daniel Lezcano wrote:

> From: Viresh Kumar <viresh.kumar@linaro.org>
> 
> Migrate bcm2835 driver to the new 'set-state' interface provided by
> the clockevents core, the earlier 'set-mode' interface is marked
> obsolete now.
> 
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
> 
> We weren't doing anything in the ->set_mode() callback. So, this patch
> doesn't provide any set-state callbacks.
> 
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Lee Jones <lee@kernel.org>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  drivers/clocksource/bcm2835_timer.c | 16 ----------------
>  1 file changed, 16 deletions(-)

Looks fine.

Acked-by: Lee Jones <lee@kernel.org>

> diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
> index 26ed331..6f28229 100644
> --- a/drivers/clocksource/bcm2835_timer.c
> +++ b/drivers/clocksource/bcm2835_timer.c
> @@ -54,21 +54,6 @@ static u64 notrace bcm2835_sched_read(void)
>  	return readl_relaxed(system_clock);
>  }
>  
> -static void bcm2835_time_set_mode(enum clock_event_mode mode,
> -	struct clock_event_device *evt_dev)
> -{
> -	switch (mode) {
> -	case CLOCK_EVT_MODE_ONESHOT:
> -	case CLOCK_EVT_MODE_UNUSED:
> -	case CLOCK_EVT_MODE_SHUTDOWN:
> -	case CLOCK_EVT_MODE_RESUME:
> -		break;
> -	default:
> -		WARN(1, "%s: unhandled event mode %d\n", __func__, mode);
> -		break;
> -	}
> -}
> -
>  static int bcm2835_time_set_next_event(unsigned long event,
>  	struct clock_event_device *evt_dev)
>  {
> @@ -129,7 +114,6 @@ static void __init bcm2835_timer_init(struct device_node *node)
>  	timer->evt.name = node->name;
>  	timer->evt.rating = 300;
>  	timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
> -	timer->evt.set_mode = bcm2835_time_set_mode;
>  	timer->evt.set_next_event = bcm2835_time_set_next_event;
>  	timer->evt.cpumask = cpumask_of(0);
>  	timer->act.name = node->name;

Re: [PATCH 04/74] clockevents/drivers/bcm_kona: Migrate to new 'set-state' interface

[Scott Branden]

Looks good, thanks.

On 15-08-10 02:51 AM, Daniel Lezcano wrote:
> From: Viresh Kumar <viresh.kumar@linaro.org>
>
> Migrate bcm_kona driver to the new 'set-state' interface provided by
> the clockevents core, the earlier 'set-mode' interface is marked
> obsolete now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> Oneshot callback isn't required as it was empty.
>
> Acked-by: Ray Jui <rjui@broadcom.com>
Acked-by; Scott Branden <sbranden@broadcom.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Ray Jui <rjui@broadcom.com>
> Cc: Scott Branden <sbranden@broadcom.com>
> Cc: bcm-kernel-feedback-list@broadcom.com
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>   drivers/clocksource/bcm_kona_timer.c | 17 +++++------------
>   1 file changed, 5 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
> index f1e33d0..e717e87 100644
> --- a/drivers/clocksource/bcm_kona_timer.c
> +++ b/drivers/clocksource/bcm_kona_timer.c
> @@ -127,25 +127,18 @@ static int kona_timer_set_next_event(unsigned long clc,
>   	return 0;
>   }
>
> -static void kona_timer_set_mode(enum clock_event_mode mode,
> -			     struct clock_event_device *unused)
> +static int kona_timer_shutdown(struct clock_event_device *evt)
>   {
> -	switch (mode) {
> -	case CLOCK_EVT_MODE_ONESHOT:
> -		/* by default mode is one shot don't do any thing */
> -		break;
> -	case CLOCK_EVT_MODE_UNUSED:
> -	case CLOCK_EVT_MODE_SHUTDOWN:
> -	default:
> -		kona_timer_disable_and_clear(timers.tmr_regs);
> -	}
> +	kona_timer_disable_and_clear(timers.tmr_regs);
> +	return 0;
>   }
>
>   static struct clock_event_device kona_clockevent_timer = {
>   	.name = "timer 1",
>   	.features = CLOCK_EVT_FEAT_ONESHOT,
>   	.set_next_event = kona_timer_set_next_event,
> -	.set_mode = kona_timer_set_mode
> +	.set_state_shutdown = kona_timer_shutdown,
> +	.tick_resume = kona_timer_shutdown,
>   };
>
>   static void __init kona_timer_clockevents_init(void)
>

Re: [PATCH 67/74] score/time: Migrate to new 'set-state' interface

[Lennox Wu]

Acked-by: Lennox Wu <lennox.wu@gmail.com>

2015-08-10 17:52 GMT+08:00 Daniel Lezcano <daniel.lezcano@linaro.org>:
> From: Viresh Kumar <viresh.kumar@linaro.org>
>
> Migrate score driver to the new 'set-state' interface provided by
> clockevents core, the earlier 'set-mode' interface is marked obsolete
> now.
>
> This also enables us to implement callbacks for new states of clockevent
> devices, for example: ONESHOT_STOPPED.
>
> We weren't doing anything in ONESHOT/SHUTDOWN/RESUME modes and so
> callbacks for them aren't implemented.
>
> Cc: Chen Liqin <liqin.linux@gmail.com>
> Cc: Lennox Wu <lennox.wu@gmail.com>
> Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  arch/score/kernel/time.c | 31 ++++++++++---------------------
>  1 file changed, 10 insertions(+), 21 deletions(-)
>
> diff --git a/arch/score/kernel/time.c b/arch/score/kernel/time.c
> index 24770cd..679b8d7 100644
> --- a/arch/score/kernel/time.c
> +++ b/arch/score/kernel/time.c
> @@ -55,31 +55,20 @@ static int score_timer_set_next_event(unsigned long delta,
>         return 0;
>  }
>
> -static void score_timer_set_mode(enum clock_event_mode mode,
> -               struct clock_event_device *evdev)
> +static int score_timer_set_periodic(struct clock_event_device *evt)
>  {
> -       switch (mode) {
> -       case CLOCK_EVT_MODE_PERIODIC:
> -               outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
> -               outl(SYSTEM_CLOCK/HZ, P_TIMER0_PRELOAD);
> -               outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
> -               break;
> -       case CLOCK_EVT_MODE_ONESHOT:
> -       case CLOCK_EVT_MODE_SHUTDOWN:
> -       case CLOCK_EVT_MODE_RESUME:
> -       case CLOCK_EVT_MODE_UNUSED:
> -               break;
> -       default:
> -               BUG();
> -       }
> +       outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
> +       outl(SYSTEM_CLOCK / HZ, P_TIMER0_PRELOAD);
> +       outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
> +       return 0;
>  }
>
>  static struct clock_event_device score_clockevent = {
> -       .name           = "score_clockevent",
> -       .features       = CLOCK_EVT_FEAT_PERIODIC,
> -       .shift          = 16,
> -       .set_next_event = score_timer_set_next_event,
> -       .set_mode       = score_timer_set_mode,
> +       .name                   = "score_clockevent",
> +       .features               = CLOCK_EVT_FEAT_PERIODIC,
> +       .shift                  = 16,
> +       .set_next_event         = score_timer_set_next_event,
> +       .set_state_periodic     = score_timer_set_periodic,
>  };
>
>  void __init time_init(void)
> --
> 1.9.1
>