Re: [PATCH 0/2] of: fsl/fman: reuse the fixed node parsing code

Stas Sergeev
2015-08-12T13:58:20Z

12.08.2015 16:26, Madalin-Cristian Bucur пишет:
>>> I've tried to make the smallest changes that allow me to retrieve those
>>> without modifying existing API.
>>> Why is it important to hide the default values from the MAC driver?
>> My worry is that the fixed values are not really fixed, and
>> therefore are not always useful to access directly. It is likely
>> not a problem for your use-case, as, as you say, the AN is
>> disabled, but this is probably not the best to do in general.
> Yes, not a problem in my case.
>
>> And also you do:
>> ---
>>
>> - err = of_phy_register_fixed_link(mac_node);
>> - if (err)
>> + struct phy_device *phy;
>> +
>> + mac_dev->fixed_link = kzalloc(sizeof(*mac_dev-
>>> fixed_link),
>> + GFP_KERNEL);
>> + if (of_phy_parse_fixed_link(mac_node, mac_dev-
>>> fixed_link))
>> + goto _return_dev_set_drvdata;
>> +
>> + phy = fixed_phy_register(PHY_POLL, mac_dev->fixed_link,
>> + mac_node);
>>
>> ---
>>
>> which means you really want to circumvent the current OF
>> api quite a lot, without saying why in the patch description.
> I circumvent the API because I din not want to change existing API.
> If I could get a reference to the status struct without changing any code
> or without being required to call by myself fixed_phy_register(), I
> would of done that. Given the existing code in of_phy_register_fixed_link(),
> this was my only option. I could have broken of_phy_register_fixed_link()
> in two functions:
>
> of_phy_parse_fixed_link() and of_phy_register_fixed_link(), the latter doing only
> the call to fixed_phy_register()
>
> that would allow to keep of_phy_register_fixed_link() as it is, broken in two stages:
>
> - parsing
> - registering
>
> than can be used by other drivers in order to get the status but I think it's overkill.
What I referred to as "circumventing an API" is that you do
phy = fixed_phy_register(PHY_POLL, mac_dev->fixed_link, + mac_node);
by hands, instead of letting the of_phy_register_fixed_link() doing so.

How about a smaller circumvention, like this for instance:
---
err = of_phy_register_fixed_link(mac_node);
phy = of_phy_find_device(dn);
status = fixed_phy_get_link_status(phy); // no such func, to be coded up
---

Or even like this:
---
err = of_phy_register_fixed_link(mac_node);
phy = of_phy_find_device(dn);
set_speed_and_duplex(phy->speed, phy->duplex); // not sure if these
values are available that early
---

Also I meant the description should have been in the patch,
not in the e-mail. :) You only wrote _what_ the patch does
(which is of course obvious from the code itself), but not
_why_ and _what was fixed_ (what didn't work).

>> As to your problem: would it be possible to set speed & duplex
>> after you do of_phy_connect()? It returns the phy_device
>> pointer, and perhaps you can look into phydev->speed and
>> phydev->duplex at that point?
> It would be possible but un-natural as I'd have probing information only available at
> runtime.
This is un-natural only if you deal just with a fixed case.
If your driver can deal also with the non-fixed cases
(either AN or MDIO), then this looks more natural as the
non-fixed management should be done at any point of time,
and certainly _after_ of_phy_connect(). So if your driver is
universal, this look like the natural choise to me, but if it is
limited to the fixed case, then, as a simplification, you move
that to the init time.
But I am not argueing what is more natural. Maybe the
above approaches with of_phy_find_device() can be used
in init time?

> That would just complicate matters for my particular case ans I suspect there
> will be other drivers that get into this situation.
I suspect only those that are limited to the fixed-link case.
Only then they may decide to move phy management to
init time, but IMHO this is just an optimization.

> You are concerned about people
> abusing this API to read fixed link status when the link is not really fixed, I'm concerned
> about declaring the link as fixed-link when it's not. Maybe the naming/binding needs to be
> revised to cover the case when all is fixed but the link.
Yes, naming is the problem. fixed-link is just a bad name.
See how it is defined:
---
Some Ethernet MACs have a "fixed link", and are not connected to a
normal MDIO-managed PHY device.
---
To me this means any non-MDIO PHY connection, but
unfortunately the name "fixed-link" suggests a bit more
than advertised. :(