Re: "scsi: convert host_busy to atomic_t" series causes regressions for some hardware configurations

[Sergio Callegari <sergio.callegari@gmail.com>]

Sure, thanks!

I'll test this weekend.

Best,

Sergio

On 25/08/2015 13:00, Christoph Hellwig wrote:
> Hi Sergio,
>
> can you give the patch below a try?
>
> libata currently completes the SCSI command before freeing the internal
> command structure, which could lead to various races that mess with
> the ATA command state, which might cause issues like the one you see.
>
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 641a61a..92cc156 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -1772,6 +1772,15 @@ nothing_to_do:
>   	return 1;
>   }
>   
> +static void ata_qc_done(struct ata_queued_cmd *qc)
> +{
> +	struct scsi_cmnd *cmd = qc->scsicmd;
> +	void (*done)(struct scsi_cmnd *) = qc->scsidone;
> +
> +	ata_qc_free(qc);
> +	done(cmd);
> +}
> +
>   static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
>   {
>   	struct ata_port *ap = qc->ap;
> @@ -1810,9 +1819,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
>   	if (need_sense && !ap->ops->error_handler)
>   		ata_dump_status(ap->print_id, &qc->result_tf);
>   
> -	qc->scsidone(cmd);
> -
> -	ata_qc_free(qc);
> +	ata_qc_done(qc);
>   }
>   
>   /**
> @@ -2611,8 +2618,7 @@ static void atapi_sense_complete(struct ata_queued_cmd *qc)
>   		ata_gen_passthru_sense(qc);
>   	}
>   
> -	qc->scsidone(qc->scsicmd);
> -	ata_qc_free(qc);
> +	ata_qc_done(qc);
>   }
>   
>   /* is it pointless to prefer PIO for "safety reasons"? */
> @@ -2707,8 +2713,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
>   			qc->dev->sdev->locked = 0;
>   
>   		qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
> -		qc->scsidone(cmd);
> -		ata_qc_free(qc);
> +		ata_qc_done(qc);
>   		return;
>   	}
>   
> @@ -2752,8 +2757,7 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
>   		cmd->result = SAM_STAT_GOOD;
>   	}
>   
> -	qc->scsidone(cmd);
> -	ata_qc_free(qc);
> +	ata_qc_done(qc);
>   }
>   /**
>    *	atapi_xlat - Initialize PACKET taskfile