From: Jaehoon Chung <jh80.chung@samsung.com>
To: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Kukjin Kim <kgene@kernel.org>
Subject: Re: [PATCH] ARM: dts: use vqmmc-supply of emmc/sd for exynos4412-odroid-common
Date: Fri, 28 Aug 2015 10:48:56 +0900 [thread overview]
Message-ID: <55DFBE08.9090603@samsung.com> (raw)
In-Reply-To: <55DF0204.1010604@samsung.com>
On 08/27/2015 09:26 PM, Krzysztof Kozlowski wrote:
> W dniu 27.08.2015 o 18:29, Jaehoon Chung pisze:
>> Currently vmmc's property is wrong.
>> If it needs to control two supplies, then it has to use vmmc/vqmmc-supply.
>> (Card supply power and I/O Line supply Power.)
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>> ---
>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> index ca7d168..4ddabfd 100644
>> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
>> @@ -461,10 +461,10 @@
>> &mshc_0 {
>> pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
>> pinctrl-names = "default";
>> - vmmc-supply = <&ldo20_reg &buck8_reg>;
>> + vmmc-supply = <&ldo20_reg>;
>> + vqmmc-supply = <&buck8_reg>;
>
> Shouldn't this be reversed? LDO20 has 1.8V and it goes to MMC connector,
> so it should be VQMMC?
If my schematics is right thing, buck8 is used LAN card power.
I will send after removing buck8_reg. how about?
Anyway, Thanks for pointing out. :)
I don't know who this regulator applied. I have guessed that it used for eMMC.
Sorry for guessing.
Best Regards,
Jaehoon Chung
>
> In the same time I can't find on schematics where BUCK8 goes...
>
> The SDHCI_2 node below looks good.
>
> Best regards,
> Krzysztof
>
>> mmc-pwrseq = <&emmc_pwrseq>;
>> status = "okay";
>> -
>> num-slots = <1>;
>> broken-cd;
>> card-detect-delay = <200>;
>> @@ -485,7 +485,8 @@
>> bus-width = <4>;
>> pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
>> pinctrl-names = "default";
>> - vmmc-supply = <&ldo4_reg &ldo21_reg>;
>> + vmmc-supply = <&ldo21_reg>;
>> + vqmmc-supply = <&ldo4_reg>;
>> cd-gpios = <&gpk2 2 0>;
>> cd-inverted;
>> status = "okay";
>>
>
>
>
next prev parent reply other threads:[~2015-08-28 1:49 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 9:29 [PATCH] ARM: dts: use vqmmc-supply of emmc/sd for exynos4412-odroid-common Jaehoon Chung
2015-08-27 10:03 ` Javier Martinez Canillas
2015-08-27 12:26 ` Krzysztof Kozlowski
2015-08-28 1:48 ` Jaehoon Chung [this message]
2015-08-28 1:56 ` Krzysztof Kozlowski
2015-08-28 16:10 ` Tobias Jakobi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55DFBE08.9090603@samsung.com \
--to=jh80.chung@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox