Re: [PATCH 1/4] dt-binding: gpio: Add Qualcomm SMSM device tree documentation

[Stanimir Varbanov <svarbanov@mm-sol.com>]

On 08/27/2015 08:37 PM, Bjorn Andersson wrote:
> This documents a device tree binding for exposing the Qualcomm Shared
> Memory State Machine as a set of gpio- and interrupt-controllers.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
>  .../devicetree/bindings/gpio/qcom,smsm.txt         | 114 +++++++++++++++++++++

<snip>

> += EXAMPLE
> +The following example shows the SMEM setup for controlling properties of the
> +wireless processor, defined from the 8974 apps processor's point-of-view. It
> +encompasses one outbound entry and the outgoing interrupt for the wireless
> +processor.
> +
> +smsm {
> +	compatible = "qcom,smsm";
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	qcom,ipc-3 = <&apcs 8 19>;

Can we use something more descriptive here, for example

qcom,ipc-rpm = <&apcs 8 19>;

and replace these magic numbers with defines?

> +
> +	apps_smsm: apps@0 {
> +		reg = <0>;
> +
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +	};
> +
> +	wcnss_smsm: wcnss@7 {
> +		reg = <7>;
> +		interrupts = <0 144 1>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};


-- 
regards,
Stan