Re: [PATCH 3/6] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS

[Chanwoo Choi <cw00.choi@samsung.com>]

On 2015년 09월 10일 20:41, Charles Keepax wrote:
> From: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
> 
> The polarity of MICD_CLAMP_STS does not change when different clamp
> modes are used, this patch corrects this issue.
> 
> Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/extcon/extcon-arizona.c |    5 +----
>  1 files changed, 1 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index 7bfaacd..6d030a0 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -1059,10 +1059,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
>  
>  	if (arizona->pdata.jd_gpio5) {
>  		mask = ARIZONA_MICD_CLAMP_STS;
> -		if (arizona->pdata.jd_invert)
> -			present = ARIZONA_MICD_CLAMP_STS;
> -		else
> -			present = 0;
> +		present = 0;
>  	} else {
>  		mask = ARIZONA_JD1_STS;
>  		if (arizona->pdata.jd_invert)
> 

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

Thanks,
Chanwoo Choi