Re: [PATCH v3 1/2] dt-bindings: Add Broadcom Cygnus PCIe PHY binding

[Kishon Vijay Abraham I <kishon@ti.com>]

Hi,

On Tuesday 15 September 2015 11:26 PM, Ray Jui wrote:
> Add DT binding for Broadcom Cygnus PCIe PHYs

DT binding documentation.

-Kishon

> 
> Signed-off-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>


> ---
>  .../bindings/phy/brcm,cygnus-pcie-phy.txt          | 30 ++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
> new file mode 100644
> index 0000000..ba41143
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
> @@ -0,0 +1,30 @@
> +Broadcom Cygnus PCIe PHY
> +
> +Required properties:
> +- compatible: Must be "brcm,cygnus-pcie-phy"
> +- reg: base address and length of the PCIe PHY block
> +- #phy-cells: must be <1>
> +The first cell is the PHY ID:
> +0 - PCIe RC 0
> +1 - PCIe RC 1
> +
> +Example:
> +	pcie_phy: phy@0301d0a0 {
> +		compatible = "brcm,cygnus-pcie-phy";
> +		reg = <0x0301d0a0 0x14>;
> +		#phy-cells = <1>;
> +	};
> +
> +	pcie0: pcie@18012000 {
> +		...
> +		...
> +		phys = <&pcie_phy 0>;
> +		phy-names = "pcie-phy";
> +	};
> +
> +	pcie1: pcie@18013000 {
> +		...
> +		...
> +		phys = <&pcie_phy 1>;
> +		phy-names = "pcie-phy";
> +	};
>