From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754138AbbIWKa3 (ORCPT ); Wed, 23 Sep 2015 06:30:29 -0400 Received: from eusmtp01.atmel.com ([212.144.249.243]:31952 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752854AbbIWKa0 (ORCPT ); Wed, 23 Sep 2015 06:30:26 -0400 From: Nicolas Ferre Subject: Re: [PATCH linux-next v9 0/3] mfd: flexcom: add a driver for Flexcom To: Lee Jones , Cyrille Pitchen , , Samuel Ortiz References: <20150920041912.GS3039@x1> CC: , , , , , , , , , X-Enigmail-Draft-Status: N1110 Organization: atmel Message-ID: <56027F10.1060804@atmel.com> Date: Wed, 23 Sep 2015 12:29:36 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.2.0 MIME-Version: 1.0 In-Reply-To: <20150920041912.GS3039@x1> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Le 20/09/2015 06:19, Lee Jones a écrit : > Patch set description? Cyrille actually placed it as the v1 changelog below... > Once Rob is satisfied, please re-submit this set with Nicolas' Acks I think that Rob was okay with the DT binding: "A few comments, but in general looks fine." and it may not be important to tack Rob for addition of his formal tag... Or maybe this message can act as a "ping" for Rob... > and I will re-review. We wait one or two days before Cyrille re-send the series. We are looking forward to using this driver in Linux-next soon. Bye, >> ChangeLog >> >> v9: >> - go back to v5 (use the new "atmel,flexcom-mode" DT property). >> - fix the name of the spi node in the DT example: from spi@f8034400 to >> spi@400 >> - align the fields of the struct platform_driver atmel_flexcom_driver as >> suggested by Lee Jones. >> >> v8: >> - fix the name of the spi node in the DT example: from spi@f8034400 to >> spi@2,0 >> - use the return code of op_property_read_u32_index() instead of -EINVAL >> to report error. >> - add Acked-by from Nicolas Ferre >> >> v7: >> - read the operating mode from the very first u32 of the reg property from >> the first available child node (should be unique). >> - update the DT bindings documentation accordingly. >> >> v6: >> - select the operating mode according to the "compatible" DT property of >> the first available child node (should be unique). >> - remove the "atmel,flexcom-mode" DT property so the need of a header file >> defining macros for the possible values of this deprecated property. >> >> v5: >> - create a header file containing macros used by DT bindings >> - use numeric constants instead of strings to select the Flexcom mode >> - change the license to "GPL v2" >> - update the DT binding documentation to make it more readable and add >> references to USART, SPI and I2C DT binding documentations. remove the >> useless label in the Example section. >> - change the register prefix from FX_ to FLEX_ to match the Flexcom >> programmer datasheet. >> - rename some variables to make them more understandable. >> >> v4: >> - check clk_prepare_enable() return code in atmel_flexcom_probe() >> - add a commit message to the DT binding patch >> >> v3: >> - remove MODULE_ALIAS() >> - add Acked-by from Boris Brezillon and Alexandre Belloni >> >> v2: >> - enhance the documentation of DT bindings and change the way the "ranges" >> property is used. >> - replace __raw_readl() and __raw_writel() by readl() and writel(). >> - change the module license to "GPL" for v2 or later >> - print the selected flexcom mode after the hardware version >> >> v1: >> This series of patches a support to the Atmel Flexcom, a wrapper which >> integrates an USART, a SPI controller and a TWI controller. Only one >> peripheral can be used at a time. The active function is selected though >> the Flexcom Mode Register. >> >> Cyrille Pitchen (3): >> mfd: atmel-flexcom: create include file with macros used by DT >> bindings >> mfd: devicetree: add bindings for Atmel Flexcom >> mfd: atmel-flexcom: add a driver for Atmel Flexible Serial >> Communication Unit >> >> .../devicetree/bindings/mfd/atmel-flexcom.txt | 67 +++++++++++++ >> drivers/mfd/Kconfig | 11 +++ >> drivers/mfd/Makefile | 1 + >> drivers/mfd/atmel-flexcom.c | 104 +++++++++++++++++++++ >> include/dt-bindings/mfd/atmel-flexcom.h | 16 ++++ >> 5 files changed, 199 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt >> create mode 100644 drivers/mfd/atmel-flexcom.c >> create mode 100644 include/dt-bindings/mfd/atmel-flexcom.h >> > -- Nicolas Ferre