From: Yakir Yang <ykk@rock-chips.com>
To: Russell King <rmk+kernel@arm.linux.org.uk>,
linux-rockchip@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
Andy Yan <andy.yan@rock-chips.com>,
Fabio Estevam <fabio.estevam@freescale.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Jon Nettleton <jon.nettleton@gmail.com>,
David Airlie <airlied@linux.ie>
Subject: Re: [PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling
Date: Wed, 07 Oct 2015 11:40:30 +0800 [thread overview]
Message-ID: <5614942E.3010702@rock-chips.com> (raw)
In-Reply-To: <E1ZO6b8-0002r1-Gr@rmk-PC.arm.linux.org.uk>
Hi Russell & Andy
On 08/09/2015 12:03 AM, Russell King wrote:
> The FSL kernel detects the HDMI vendor id, and uses this to set
> hdmi->edid_cfg.hdmi_cap, which is then used to set mdvi appropriately,
> rather than detecting whether we are outputting a CEA mode. Update
> the dw_hdmi code to use this logic, but lets eliminate the mdvi
> variable, prefering the more verbose "hdmi->sink_is_hdmi" instead.
>
> Use the generic drm_detect_hdmi_monitor() to detect a HDMI sink.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Actually I have posted similarly changes before, feel better about
this one, and I have backport those 06/12 & 07/12 to chrome-3.14
tree, audio still works rightly when I changing the display resolutions.
So I would like to share:
Tested-by: Yakir Yang <ykk@rock-chips.com>
Besides, Andy, would you like to share your ACK here :)
Best regards,
- Yakir
> ---
> drivers/gpu/drm/bridge/dw_hdmi.c | 26 ++++++++++++--------------
> 1 file changed, 12 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
> index 2e211b8331ed..7f764716f3c4 100644
> --- a/drivers/gpu/drm/bridge/dw_hdmi.c
> +++ b/drivers/gpu/drm/bridge/dw_hdmi.c
> @@ -82,7 +82,6 @@ static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
> };
>
> struct hdmi_vmode {
> - bool mdvi;
> bool mdataenablepolarity;
>
> unsigned int mpixelclock;
> @@ -123,6 +122,7 @@ struct dw_hdmi {
>
> struct i2c_adapter *ddc;
> void __iomem *regs;
> + bool sink_is_hdmi;
>
> spinlock_t audio_lock;
> struct mutex audio_mutex;
> @@ -913,11 +913,10 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
> static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
> {
> int i, ret;
> - bool cscon = false;
> + bool cscon;
>
> /*check csc whether needed activated in HDMI mode */
> - cscon = (is_color_space_conversion(hdmi) &&
> - !hdmi->hdmi_data.video_mode.mdvi);
> + cscon = hdmi->sink_is_hdmi && is_color_space_conversion(hdmi);
>
> /* HDMI Phy spec says to do the phy initialization sequence twice */
> for (i = 0; i < 2; i++) {
> @@ -1094,9 +1093,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
> HDMI_FC_INVIDCONF_IN_I_P_INTERLACED :
> HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE;
>
> - inv_val |= (vmode->mdvi ?
> - HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE :
> - HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE);
> + inv_val |= hdmi->sink_is_hdmi ?
> + HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE :
> + HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE;
>
> hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF);
>
> @@ -1236,10 +1235,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>
> if (!hdmi->vic) {
> dev_dbg(hdmi->dev, "Non-CEA mode used in HDMI\n");
> - hdmi->hdmi_data.video_mode.mdvi = true;
> } else {
> dev_dbg(hdmi->dev, "CEA mode used vic=%d\n", hdmi->vic);
> - hdmi->hdmi_data.video_mode.mdvi = false;
> }
>
> if ((hdmi->vic == 6) || (hdmi->vic == 7) ||
> @@ -1275,10 +1272,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
> dw_hdmi_enable_video_path(hdmi);
>
> /* not for DVI mode */
> - if (hdmi->hdmi_data.video_mode.mdvi) {
> - dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
> - } else {
> - dev_dbg(hdmi->dev, "%s CEA mode\n", __func__);
> + if (hdmi->sink_is_hdmi) {
> + dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__);
>
> /* HDMI Initialization Step E - Configure audio */
> hdmi_clk_regenerator_update_pixel_clock(hdmi);
> @@ -1286,6 +1281,8 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
>
> /* HDMI Initialization Step F - Configure AVI InfoFrame */
> hdmi_config_AVI(hdmi, mode);
> + } else {
> + dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
> }
>
> hdmi_video_packetize(hdmi);
> @@ -1294,7 +1291,7 @@ static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
> hdmi_tx_hdcp_config(hdmi);
>
> dw_hdmi_clear_overflow(hdmi);
> - if (hdmi->cable_plugin && !hdmi->hdmi_data.video_mode.mdvi)
> + if (hdmi->cable_plugin && hdmi->sink_is_hdmi)
> hdmi_enable_overflow_interrupts(hdmi);
>
> return 0;
> @@ -1444,6 +1441,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
> dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
> edid->width_cm, edid->height_cm);
>
> + hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
> drm_mode_connector_update_edid_property(connector, edid);
> ret = drm_add_edid_modes(connector, edid);
> kfree(edid);
next prev parent reply other threads:[~2015-10-07 3:40 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-08 16:02 [PATCH 00/12] dw-hdmi development Russell King - ARM Linux
2015-08-08 16:03 ` [PATCH 01/12] drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs Russell King
2015-08-08 16:03 ` [PATCH 02/12] drm: bridge/dw_hdmi: don't support any pixel doubled modes Russell King
2015-08-08 16:03 ` [PATCH 03/12] gpu: imx: simplify sync polarity setting Russell King
2015-10-06 17:57 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 04/12] gpu: imx: fix support for interlaced modes Russell King
2015-08-27 8:39 ` Philipp Zabel
2015-08-27 8:54 ` Russell King - ARM Linux
2015-08-27 9:40 ` Philipp Zabel
2015-10-06 17:59 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 05/12] drm: bridge/dw_hdmi: add support for interlaced video modes Russell King
2015-10-06 18:00 ` Fabio Estevam
2015-08-08 16:03 ` [PATCH 06/12] drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling Russell King
2015-10-07 3:40 ` Yakir Yang [this message]
2015-08-08 16:03 ` [PATCH 07/12] drm: bridge/dw_hdmi: enable audio only if sink supports audio Russell King
2015-10-07 3:42 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 08/12] drm: bridge/dw_hdmi: avoid enabling interface in mode_set Russell King
2015-10-07 3:50 ` Yakir Yang
2015-10-07 9:18 ` Russell King - ARM Linux
2015-10-07 9:35 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 09/12] drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power() Russell King
2015-08-08 16:04 ` [PATCH 10/12] drm: bridge/dw_hdmi: fix phy enable/disable handling Russell King
[not found] ` <56149A11.4070102@rock-chips.com>
2015-10-07 9:48 ` Russell King - ARM Linux
[not found] ` <5614F68B.6050808@rock-chips.com>
2015-10-07 19:17 ` Russell King - ARM Linux
2015-10-08 8:35 ` Yakir Yang
2015-08-08 16:04 ` [PATCH 11/12] drm: bridge/dw_hdmi: add connector mode forcing Russell King
2015-10-06 18:01 ` Fabio Estevam
2015-08-08 16:04 ` [PATCH 12/12] drm: bridge/dw_hdmi: improve HDMI enable/disable handling Russell King
2015-10-06 18:03 ` Fabio Estevam
2015-08-08 16:09 ` [PATCH 0/9] dw-hdmi audio support Russell King - ARM Linux
2015-08-08 16:10 ` [PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-10 10:05 ` Takashi Iwai
2015-08-10 10:39 ` Russell King - ARM Linux
2015-08-10 12:23 ` Takashi Iwai
2015-08-10 16:49 ` Russell King - ARM Linux
2015-08-10 18:16 ` Mark Brown
2015-08-14 13:54 ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver David Airlie <airlied@linux.ie>, Sascha Hauer <s.hauer@pengutronix.de>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Jaroslav Kysela <perex@perex.cz>, linux-rockchip@lists.infradead.org, Mark Brown <broonie@kernel.org>, Philipp Zabel <p.zabel@pengutronix.de>, Yakir Yang <ykk@rock-chips.com>, Andy Yan <andy.yan@rock-chips.com>, Jon Nettleton <jon.nettleton@gmail.com>, linux-arm-kernel@lists.infradead.org Russell King
2015-08-14 14:04 ` [PATCH v2 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver Russell King
2015-08-14 14:34 ` [alsa-devel] " Takashi Iwai
2015-10-06 18:07 ` [PATCH " Fabio Estevam
2015-10-06 18:18 ` Russell King - ARM Linux
2015-10-06 18:45 ` Fabio Estevam
2015-10-06 18:54 ` Russell King - ARM Linux
2015-10-06 20:25 ` Fabio Estevam
2015-10-09 16:00 ` Russell King - ARM Linux
2015-10-09 16:02 ` Fabio Estevam
2015-10-09 16:11 ` Russell King - ARM Linux
2015-08-08 16:10 ` [PATCH 2/9] drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver Russell King
2015-08-08 16:10 ` [PATCH 3/9] drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio Russell King
2015-08-08 16:10 ` [PATCH 4/9] drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes Russell King
2015-08-08 16:10 ` [PATCH 5/9] drm: bridge/dw_hdmi: avoid being recursive in N calculation Russell King
2015-09-04 17:50 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 6/9] drm: bridge/dw_hdmi: adjust pixel clock values " Russell King
2015-09-04 18:21 ` Doug Anderson
2015-09-04 19:48 ` Doug Anderson
2015-09-04 21:24 ` Russell King - ARM Linux
2015-09-04 23:50 ` Doug Anderson
2015-09-05 0:27 ` Russell King - ARM Linux
2015-09-05 2:03 ` Doug Anderson
2015-09-05 8:31 ` Russell King - ARM Linux
2015-09-05 13:46 ` Doug Anderson
2015-09-05 14:01 ` Russell King - ARM Linux
2015-09-05 19:44 ` Doug Anderson
2015-09-05 8:34 ` Russell King - ARM Linux
2015-09-05 13:50 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 7/9] drm: bridge/dw_hdmi: remove ratio support from ACR code Russell King
2015-09-04 18:24 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 8/9] drm: bridge/dw_hdmi: replace CTS calculation for the ACR Russell King
2015-09-04 20:00 ` Doug Anderson
2015-08-08 16:10 ` [PATCH 9/9] drm: bridge/dw_hdmi-i2s-audio: add audio driver Russell King
2015-08-10 15:48 ` Russell King - ARM Linux
2015-08-10 16:26 ` Yakir Yang
2015-08-27 8:42 ` [PATCH 0/9] dw-hdmi audio support Philipp Zabel
2016-01-05 15:40 ` [alsa-devel] " Jean-Michel Hautbois
2016-01-05 15:54 ` Fabio Estevam
2016-01-05 16:04 ` Russell King - ARM Linux
2016-01-07 8:21 ` Jean-Michel Hautbois
2015-08-10 12:21 ` [PATCH 00/12] dw-hdmi development Thierry Reding
2015-08-18 10:37 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5614942E.3010702@rock-chips.com \
--to=ykk@rock-chips.com \
--cc=airlied@linux.ie \
--cc=andy.yan@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@freescale.com \
--cc=jon.nettleton@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).