From: Petr Cvek <petr.cvek@tul.cz>
To: Robert Jarzmik <robert.jarzmik@free.fr>,
Philipp Zabel <philipp.zabel@gmail.com>,
g.liakhovetski@gmx.de
Cc: daniel@zonque.org, haojian.zhuang@gmail.com,
linux@arm.linux.org.uk, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 19/26] ARM: pxa: magician: Add support for Omnivision OV9640 camera
Date: Thu, 8 Oct 2015 08:05:25 +0200 [thread overview]
Message-ID: <561607A5.50406@tul.cz> (raw)
In-Reply-To: <87pp0qa27m.fsf@belgarion.home>
Dne 7.10.2015 v 21:49 Robert Jarzmik napsal(a):
> Philipp Zabel <philipp.zabel@gmail.com> writes:
>
>> Am Montag, den 28.09.2015, 23:38 +0200 schrieb Petr Cvek:
>>> This patch adds support for an OV9640 camera to the HTC Magician
>>> machine.
>>>
>>> Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
>>
>> Still untested, but looks good to me.
> I'm still reluctant to have the reset with the timings handled in the board code
> as I consider this should be in the camera driver code
> (magician_camera_reset()).
It supports an actual state of the OV9640 driver handling. But I can exclude it until
OV9640 will be transitioned. I don't have enough information about gpiod and soc-camera
and not enough time to maintain multiple different (and dependent) patchsets.
I forgot to test the timings ... actually I think I forgot results :-D . It was around the same time
I have found I2C fast mode is not working. Will test again.
Petr
next prev parent reply other threads:[~2015-10-08 6:04 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1443472089.git.petr.cvek@tul.cz>
2015-09-28 21:09 ` [PATCH v4 01/26] ARM: pxa: magician: Fix indentation in machine files Petr Cvek
2015-10-03 12:14 ` Philipp Zabel
2015-09-28 21:10 ` [PATCH v4 02/26] ARM: pxa: magician: Change comments to be more informative Petr Cvek
2015-10-03 12:19 ` Philipp Zabel
2015-10-13 20:08 ` Robert Jarzmik
2015-09-28 21:10 ` [PATCH v4 03/26] ARM: pxa: magician: Print more specific error message for global GPIOs Petr Cvek
2015-10-03 12:19 ` Philipp Zabel
2015-09-28 21:11 ` [PATCH v4 04/26] ARM: pxa: magician: Optimize debug messages for LCD power Petr Cvek
2015-10-03 12:20 ` Philipp Zabel
2015-09-28 21:11 ` [PATCH v4 05/26] ARM: pxa: magician: Change description of LCD power GPIO Petr Cvek
2015-10-03 12:21 ` Philipp Zabel
2015-09-28 21:15 ` [PATCH v4 06/26] ARM: pxa: magician: Add new discovered EGPIO pins Petr Cvek
2015-10-03 12:23 ` Philipp Zabel
2015-09-28 21:15 ` [PATCH v4 07/26] ARM: pxa: magician: Fix HTC Magician pin mux definitions Petr Cvek
2015-10-03 12:30 ` Philipp Zabel
2015-10-05 2:15 ` Petr Cvek
2015-10-13 20:09 ` Robert Jarzmik
2015-09-28 21:15 ` [PATCH v4 08/26] ARM: pxa: magician: Rename abstract LCD GPIOs Petr Cvek
2015-10-03 12:31 ` Philipp Zabel
2015-09-28 21:16 ` [PATCH v4 09/26] ARM: pxa: magician: Optimize powerup delays for Samsung LCD Petr Cvek
2015-10-03 12:32 ` Philipp Zabel
2015-09-28 21:32 ` [PATCH v4 10/26] ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz Petr Cvek
2015-10-03 12:33 ` Philipp Zabel
2015-09-28 21:32 ` [PATCH v4 11/26] ARM: pxa: magician: Optimize EGPIO initial values Petr Cvek
2015-10-03 12:35 ` Philipp Zabel
2015-10-07 19:45 ` Robert Jarzmik
2015-09-28 21:32 ` [PATCH v4 12/26] ARM: pxa: magician: Rename charger cable detection EGPIOs Petr Cvek
2015-10-03 12:38 ` Philipp Zabel
2015-10-09 2:33 ` Petr Cvek
2015-09-28 21:33 ` [PATCH v4 13/26] ARM: pxa: magician: Fix and add charging detection functions Petr Cvek
2015-09-28 21:33 ` [PATCH v4 14/26] ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers Petr Cvek
2015-10-03 12:41 ` Philipp Zabel
2015-09-28 21:34 ` [PATCH v4 15/26] ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir Petr Cvek
2015-09-28 21:34 ` [PATCH v4 16/26] ARM: pxa: magician: Fix support for Intel Strata NOR Flash Petr Cvek
2015-09-28 21:38 ` [PATCH v4 17/26] ARM: pxa: magician: Fix wrongly enabled USB host ports Petr Cvek
2015-10-03 12:45 ` Philipp Zabel
2015-10-05 2:03 ` Petr Cvek
2015-09-28 21:38 ` [PATCH v4 18/26] ARM: pxa: magician: Add support for ADS7846 Petr Cvek
2015-10-03 12:49 ` Philipp Zabel
2015-10-12 4:39 ` Petr Cvek
2015-09-28 21:38 ` [PATCH v4 19/26] ARM: pxa: magician: Add support for Omnivision OV9640 camera Petr Cvek
2015-10-03 12:50 ` Philipp Zabel
2015-10-07 19:49 ` Robert Jarzmik
2015-10-08 6:05 ` Petr Cvek [this message]
2015-09-28 21:39 ` [PATCH v4 20/26] ARM: pxa: magician: Add support for MAX1587A Vcore regulator Petr Cvek
2015-10-03 12:57 ` Philipp Zabel
2015-10-13 20:16 ` Robert Jarzmik
2015-09-28 21:39 ` [PATCH v4 21/26] ARM: pxa: magician: Add support for PXA27x UDC Petr Cvek
2015-10-03 12:58 ` Philipp Zabel
2015-10-13 20:29 ` Robert Jarzmik
2015-09-28 21:39 ` [PATCH v4 22/26] ARM: pxa: magician: Remove pdata for pasic3-leds Petr Cvek
2015-10-03 12:59 ` Philipp Zabel
2015-10-13 20:32 ` Robert Jarzmik
2015-09-28 21:40 ` [PATCH v4 23/26] ARM: pxa: magician: Remove definition of the STUART port Petr Cvek
2015-09-28 21:40 ` [PATCH v4 24/26] ARM: pxa: magician: Add debug message for backlight brightness function Petr Cvek
2015-09-28 21:40 ` [PATCH v4 25/26] ARM: pxa: magician: Add missing regulator for PWM backlight Petr Cvek
2015-10-03 13:02 ` Philipp Zabel
2015-09-28 21:42 ` [PATCH v4 26/26] ARM: pxa: magician: Move platform_add_devices() to the end of magician_init() Petr Cvek
2015-10-03 13:04 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=561607A5.50406@tul.cz \
--to=petr.cvek@tul.cz \
--cc=daniel@zonque.org \
--cc=g.liakhovetski@gmx.de \
--cc=haojian.zhuang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=philipp.zabel@gmail.com \
--cc=robert.jarzmik@free.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).