From: wangfei <w.f@huawei.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <catalin.marinas@arm.com>,
<will.deacon@arm.com>, <devicetree@vger.kernel.org>,
<linux@arm.linux.org.uk>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <khilman@linaro.org>,
<sameo@linux.intel.com>, <broonie@kernel.org>,
<lgirdwood@gmail.com>, <bintian.wang@huawei.com>,
<xuwei5@hisilicon.com>, <haojian.zhuang@linaro.org>,
<zhangfei.gao@linaro.org>, <guodong.xu@linaro.org>,
<jorge.ramirez-ortiz@linaro.org>, <puck.chen@hisilicon.com>,
<xuyiping@hisilicon.com>, <kong.kongxinwei@hisilicon.com>,
<z.liuxinliang@hisilicon.com>, <william.wfei@gmail.com>,
<zhongkaihua@huawei.com>
Subject: Re: [PATCH 1/8] dt-bindings: pmic: Document Hi655x pmic driver
Date: Thu, 8 Oct 2015 15:03:17 +0800 [thread overview]
Message-ID: <56161535.1030801@huawei.com> (raw)
In-Reply-To: <20151001075844.GL3214@x1>
On 2015/10/1 15:58, Lee Jones wrote:
> I just noticed that you Cc'ed all of the Core ARM people too. Please
> do not do that. I'm sure they have enough of their own mail to trawl
> though.
>
> Only mail relevant parties i.e. those who show up when you use:
>
> ./scripts/get_maintainer.pl.
>
OK，i see，thank you！
>> Document the new compatible for Hisilicon Hi655x pmic driver.
>>
>> Signed-off-by: Fei Wang <w.f@huawei.com>
>> ---
>> .../devicetree/bindings/mfd/hisilicon,hi655x.txt | 80 ++++++++++++++++++++
>> 1 file changed, 80 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> new file mode 100644
>> index 0000000..17bd8ca
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> @@ -0,0 +1,80 @@
>> +Hisilicon hi655x Power Management Integrated Circuit (PMIC)
>> +
>> +hi655x consists of a large and varied group of sub-devices:
>> +
>> +Device Supply Names Description
>> +------ ------------ -----------
>> +hi655x-powerkey : : Powerkey
>> +hi655x-regulator-pmic : : Regulators
>> +hi655x-usbvbus : : USB plug detection
>> +hi655x-pmu-rtc : : RTC
>> +hi655x-coul : : Coulomb
>> +
>> +Required properties:
>> +- compatible : Should be "hisilicon,hi655x-pmic-driver"
>> +- reg: Base address of PMIC on hi6220 soc
>> +- #interrupt-cells: Should be 2, is the local IRQ number for hi655x.
>> +- interrupt-controller: hi655x has internal IRQs (has own IRQ domain).
>> +- pmu_irq_gpio: should be &gpio_pmu_irq_n, is the IRQ gpio of hi655x.
>> +
>> +Example:
>> + pmic: pmic@F8000000 {
>> + compatible = "hisilicon,hi655x-pmic-driver";
>> + reg = <0x0 0xF8000000 0x0 0x1000>;
>> + #interrupt-cells = <2>;
>> + interrupt-controller;
>> + pmu_irq_gpio = <&gpio_pmu_irq_n>;
>> + status = "ok";
>> +
>> + ponkey:ponkey@b1{
>> + compatible = "hisilicon,hi655x-powerkey";
>> + interrupt-parent = <&pmic>;
>> + interrupts = <6 0>, <5 0>, <4 0>;
>> + interrupt-names = "down", "up", "hold 1s";
>> + };
>> +
>> + coul: coul@1 {
>> + compatible = "hisilicon,hi655x-coul";
>> + interrupt-parent = <&pmic>;
>> + interrupts = <24 0>, <25 0>, <26 0>, <27 0>;
>> + interrupt-names = "cl_int_i", "cl_out_i", "cl_in_i", "vbat_int_i";
>> + battery_product_index = <0>;
>> + status = "ok";
>> + };
>> +
>> + rtc: rtc@1 {
>> + compatible = "hisilicon,hi655x-pmu-rtc";
>> + interrupt-parent = <&pmic>;
>> + interrupts = <20 0>;
>> + interrupt-names = "hi655x_pmu_rtc";
>> + board_id = <1>;
>> + };
>> +
>> + usbvbus:usbvbus@b2{
>> + compatible = "hisilicon,hi655x-usbvbus";
>> + interrupt-parent = <&pmic>;
>> + interrupts = <9 0>, <8 0>;
>> + interrupt-names = "connect", "disconnect";
>> + };
>> +
>> + ldo2: regulator@a21 {
>> + compatible = "hisilicon,hi655x-regulator-pmic";
>> + regulator-name = "ldo2";
>> + regulator-min-microvolt = <2500000>;
>> + regulator-max-microvolt = <3200000>;
>> + hisilicon,valid-modes-mask = <0x02>;
>> + hisilicon,valid-ops-mask = <0x01d>;
>> + hisilicon,initial-mode = <0x02>;
>> + hisilicon,regulator-type = <0x01>;
>> +
>> + hisilicon,off-on-delay = <120>;
>> + hisilicon,ctrl-regs = <0x029 0x02a 0x02b>;
>> + hisilicon,ctrl-data = <0x1 0x1>;
>> + hisilicon,vset-regs = <0x072>;
>> + hisilicon,vset-data = <0 0x3>;
>> + hisilicon,regulator-n-vol = <8>;
>> + hisilicon,vset-table = <2500000>,<2600000>,<2700000>,<2800000>,<2900000>,<3000000>,<3100000>,<3200000>;
>> + hisilicon,num_consumer_supplies = <1>;
>> + hisilicon,consumer-supplies = "sensor_analog";
>> + };
>> + };
>
next prev parent reply other threads:[~2015-10-08 7:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 11:05 [PATCH 0/8] Add Support for Hi6220 PMIC Hi6553 MFD Core and Regulator Fei Wang
2015-09-30 11:05 ` [PATCH 1/8] dt-bindings: pmic: Document Hi655x pmic driver Fei Wang
2015-09-30 17:39 ` Mark Brown
2015-10-08 6:33 ` wangfei
2015-10-12 16:49 ` Mark Brown
2015-10-01 7:56 ` Lee Jones
2015-10-01 7:58 ` Lee Jones
2015-10-08 7:03 ` wangfei [this message]
2015-09-30 11:05 ` [PATCH 2/8] mfd: Hi655x: Add support for PMIC Hi655x MFD Fei Wang
2015-09-30 11:05 ` [PATCH 3/8] arm64: dts: add Hi655x pmic node Fei Wang
2015-09-30 11:05 ` [PATCH 4/8] regulator: Hi655x: Add support for Hi655x regulator Fei Wang
2015-09-30 17:58 ` Mark Brown
2015-10-08 7:38 ` wangfei
2015-10-08 7:47 ` Javier Martinez Canillas
2015-09-30 11:05 ` [PATCH 5/8] arm64: dts: Add Hi655x regulator config node Fei Wang
2015-09-30 11:05 ` [PATCH 6/8] dt-bindings: mtcmos: Document Hi6220 mtcmos driver Fei Wang
2015-09-30 11:05 ` [PATCH 7/8] mtcmos: Hi6220: Add Hi6220 mtcmos regulator driver Fei Wang
2015-09-30 11:05 ` [PATCH 8/8] arm64: dts: Add Hi6220 mtcmos regulator node Fei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56161535.1030801@huawei.com \
--to=w.f@huawei.com \
--cc=bintian.wang@huawei.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=guodong.xu@linaro.org \
--cc=haojian.zhuang@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=khilman@linaro.org \
--cc=kong.kongxinwei@hisilicon.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=puck.chen@hisilicon.com \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
--cc=will.deacon@arm.com \
--cc=william.wfei@gmail.com \
--cc=xuwei5@hisilicon.com \
--cc=xuyiping@hisilicon.com \
--cc=z.liuxinliang@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
--cc=zhongkaihua@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).