From: Hauke Mehrtens <hauke@hauke-m.de>
To: Jon Mason <jonmason@broadcom.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
"Rafał Miłecki" <zajec5@gmail.com>
Subject: Re: [PATCH 1/2] ARM: dts: bcm5301x: Add BCM SVK DT files
Date: Sat, 10 Oct 2015 16:39:00 +0200 [thread overview]
Message-ID: <56192304.1050500@hauke-m.de> (raw)
In-Reply-To: <1443824564-17291-1-git-send-email-jonmason@broadcom.com>
On 10/03/2015 12:22 AM, Jon Mason wrote:
> Add device tree files for Broadcom Northstar based SVKs. Since the
> bcm5301x.dtsi already exists, all that is necessary is the dts files to
> enable the UARTs (and specify the RAM size for the 4708/9). With these
> files, the SVKs are able to boot to shell.
>
> Signed-off-by: Jon Mason <jonmason@broadcom.com>
> ---
> arch/arm/boot/dts/Makefile | 5 +++-
> arch/arm/boot/dts/bcm94708.dts | 52 +++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/bcm94709.dts | 52 +++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/bcm953012k.dts | 59 ++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 167 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/bcm94708.dts
> create mode 100644 arch/arm/boot/dts/bcm94709.dts
> create mode 100644 arch/arm/boot/dts/bcm953012k.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 233159d..96a1b58 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,7 +72,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm47081-buffalo-wzr-900dhp.dtb \
> bcm4709-asus-rt-ac87u.dtb \
> bcm4709-buffalo-wxr-1900dhp.dtb \
> - bcm4709-netgear-r8000.dtb
> + bcm4709-netgear-r8000.dtb \
> + bcm94708.dtb \
> + bcm94709.dtb \
> + bcm953012k.dtb
> dtb-$(CONFIG_ARCH_BCM_63XX) += \
> bcm963138dvt.dtb
> dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
> diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
> new file mode 100644
> index 0000000..57a74c6
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm94708.dts
Currently the files are named beginning with the chip name something
like this should fit better the other naming schema:
arch/arm/boot/dts/bcm4708-brcm-bcm94708.dts
> @@ -0,0 +1,52 @@
> +/*
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Broadcom Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm5301x.dtsi"
> +
> +/ {
> + model = "NorthStar SVK (BCM94708)";
> + compatible = "brcm,bcm4708";
The compatible string should also contain this exactly board like this:
compatible = "brcm,bcm94708", "brcm,bcm4708";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 mem=128M";
Instead of using mem=128M you should add an extra node like this:
memory {
reg = <0x00000000 0x08000000>;
};
Does this board only has 128M of RAM? currently we restrict all of them
to that, but I just want to know.
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
> new file mode 100644
> index 0000000..bf4b6e1
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm94709.dts
> @@ -0,0 +1,52 @@
> +/*
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Broadcom Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm5301x.dtsi"
> +
> +/ {
> + model = "NorthStar SVK (BCM94709)";
> + compatible = "brcm,bcm4709", "brcm,bcm4708";
Better this:
compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 mem=128M";
same as above.
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
> new file mode 100644
> index 0000000..1726ba0
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm953012k.dts
> @@ -0,0 +1,59 @@
> +/*
> + * BSD LICENSE
> + *
> + * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Broadcom Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm5301x.dtsi"
> +
> +/ {
> + model = "NorthStar SVK (BCM953012K)";
> + compatible = "brcm,bcm5301k", "brcm,bcm4708";
same as other file.
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
Why is no memory size given here at all?
> + };
> +};
> +
> +&uart0 {
> + clock-frequency = <62499840>;
Just out of curiosity on what does this clock frequency depend? I saw
your patch adding a real clock driver which should make this obsolete.
> + status = "okay";
> +};
> +
> +&uart1 {
> + clock-frequency = <62499840>;
> + status = "okay";
> +};
>
next prev parent reply other threads:[~2015-10-10 14:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-02 22:22 [PATCH 1/2] ARM: dts: bcm5301x: Add BCM SVK DT files Jon Mason
2015-10-02 22:22 ` [PATCH 2/2] dt-bindings: Add new boards to bcm4708 DT bindings Jon Mason
2015-10-10 14:42 ` Hauke Mehrtens
2015-10-13 16:58 ` Scott Branden
2015-10-13 21:40 ` Jon Mason
2015-10-13 22:37 ` Florian Fainelli
2015-10-14 15:34 ` Jon Mason
2015-10-14 19:44 ` Scott Branden
2015-10-10 14:39 ` Hauke Mehrtens [this message]
2015-10-13 21:38 ` [PATCH 1/2] ARM: dts: bcm5301x: Add BCM SVK DT files Jon Mason
2015-10-13 22:43 ` Ray Jui
2015-10-14 15:36 ` Jon Mason
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56192304.1050500@hauke-m.de \
--to=hauke@hauke-m.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jonmason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox