Re: [PATCHv2] fpga: zynq-fpga: Change fw format to handle bin instead of bit.

[Michal Simek <michal.simek@xilinx.com>]

On 10/20/2015 07:19 PM, Moritz Fischer wrote:
> This gets rid of the code to strip away the header and byteswap,
> as well as the check for the sync word.
> 
> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
> ---
> v2:
>  - Removed early exit path in case synq seq is not found
> ---
>  drivers/fpga/zynq-fpga.c | 24 ++----------------------
>  1 file changed, 2 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
> index 617d382..31db550 100644
> --- a/drivers/fpga/zynq-fpga.c
> +++ b/drivers/fpga/zynq-fpga.c
> @@ -287,9 +287,9 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
>  	struct zynq_fpga_priv *priv;
>  	int err;
>  	char *kbuf;
> -	size_t i, in_count;
> +	size_t in_count;
>  	dma_addr_t dma_addr;
> -	u32 transfer_length = 0;
> +	u32 transfer_length;
>  	u32 intr_status;
>  
>  	in_count = count;
> @@ -301,26 +301,6 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr,
>  
>  	memcpy(kbuf, buf, count);
>  
> -	/* look for the sync word */
> -	for (i = 0; i < count - 4; i++) {
> -		if (memcmp(kbuf + i, "\xAA\x99\x55\x66", 4) == 0) {
> -			dev_dbg(priv->dev, "Found swapped sync word\n");
> -			break;
> -		}
> -	}
> -
> -	/* remove the header, align the data on word boundary */
> -	if (i != count - 4) {
> -		count -= i;
> -		memmove(kbuf, kbuf + i, count);
> -	}
> -
> -	/* fixup endianness of the data */
> -	for (i = 0; i < count; i += 4) {
> -		u32 *p = (u32 *)&kbuf[i];
> -		*p = swab32(*p);
> -	}
> -
>  	/* enable clock */
>  	err = clk_enable(priv->clk);
>  	if (err)
> 

Looks good.
Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal