* [PATCH] regulator, dt: add dt support for tps6502x regulator
@ 2015-10-19 6:27 ` Heiko Schocher
2015-10-19 7:14 ` [RFC PATCH] regulator, dt: tps6502x_parse_dt_data() can be static kbuild test robot
2015-10-21 12:19 ` [PATCH] regulator, dt: add dt support for tps6502x regulator Mark Brown
0 siblings, 2 replies; 8+ messages in thread
From: Heiko Schocher @ 2015-10-19 6:27 UTC (permalink / raw)
To: linux-kernel; +Cc: Heiko Schocher, devicetree, Liam Girdwood, Mark Brown
add DT support for the tps6502x regulators.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
.../devicetree/bindings/regulator/tps6502x.txt | 56 ++++
arch/arm/boot/dts/tps65023.dtsi | 46 +++
drivers/regulator/tps65023-regulator.c | 326 +++++++++++++++------
3 files changed, 331 insertions(+), 97 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/tps6502x.txt
create mode 100644 arch/arm/boot/dts/tps65023.dtsi
diff --git a/Documentation/devicetree/bindings/regulator/tps6502x.txt b/Documentation/devicetree/bindings/regulator/tps6502x.txt
new file mode 100644
index 0000000..9d26070
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps6502x.txt
@@ -0,0 +1,56 @@
+TPS6502x family of regulators
+
+Required properties:
+- compatible: "ti,tps65020", "ti,tps65021" or "ti,tps65023"
+- reg: I2C slave address
+- regulators: list of regulators provided by this controller, must be named
+ after their hardware counterparts: dcdc[1-3] and ldo[1-2]
+- regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Not all regulators for the given
+ device need to be present. The definition for each of these nodes is defined
+ using the standard binding for regulators found at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+
+ The valid names for regulators are:
+ tps6502x: dcdc1, dcdc2, dcdc3, ldo1 and ldo2
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps: tps@48 {
+ compatible = "ti,tps65023";
+
+ regulators {
+ vdcdc1_reg: regulator@0 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ vdcdc2_reg: regulator@1 {
+ regulator-name = "vddshv";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vdcdc3_reg: regulator@2 {
+ regulator-name = "vdds";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ vldo1_reg: regulator@3 {
+ regulator-name = "vdda1p8v_usbphy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ vldo2_reg: regulator@4 {
+ regulator-name = "vdda3p3v_usbphy";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/arch/arm/boot/dts/tps65023.dtsi b/arch/arm/boot/dts/tps65023.dtsi
new file mode 100644
index 0000000..9e2b5f0
--- /dev/null
+++ b/arch/arm/boot/dts/tps65023.dtsi
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2015 DENX Software GmbH Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * www.ti.com/lit/ds/symlink/tps65023.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65023";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "vdcdc1", "regulator-compatible";
+ };
+
+ vdcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "vdcdc2", "regulator-compatible";
+ };
+
+ vdcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "vdcdc3", "regulator-compatible";
+ };
+
+ vldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "vldo1", "regulator-compatible";
+ };
+
+ vldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "vldo2", "regulator-compatible";
+ };
+ };
+};
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 5cc19b4..d143267 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -25,6 +25,10 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/of_regulator.h>
/* Register definitions */
#define TPS65023_REG_VERSION 0
@@ -140,8 +144,15 @@ struct tps_pmic {
u8 core_regulator;
};
+enum tps6502x_id {
+ TPS65020,
+ TPS65021,
+ TPS65023,
+};
+
/* Struct passed as driver data */
struct tps_driver_data {
+ enum tps6502x_id id;
const struct tps_info *info;
u8 core_regulator;
};
@@ -199,103 +210,6 @@ static const struct regmap_config tps65023_regmap_config = {
.val_bits = 8,
};
-static int tps_65023_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- const struct tps_driver_data *drv_data = (void *)id->driver_data;
- const struct tps_info *info = drv_data->info;
- struct regulator_config config = { };
- struct regulator_init_data *init_data;
- struct regulator_dev *rdev;
- struct tps_pmic *tps;
- int i;
- int error;
-
- /**
- * init_data points to array of regulator_init structures
- * coming from the board-evm file.
- */
- init_data = dev_get_platdata(&client->dev);
- if (!init_data)
- return -EIO;
-
- tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
- if (!tps)
- return -ENOMEM;
-
- tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
- if (IS_ERR(tps->regmap)) {
- error = PTR_ERR(tps->regmap);
- dev_err(&client->dev, "Failed to allocate register map: %d\n",
- error);
- return error;
- }
-
- /* common for all regulators */
- tps->core_regulator = drv_data->core_regulator;
-
- for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
- /* Store regulator specific information */
- tps->info[i] = info;
-
- tps->desc[i].name = info->name;
- tps->desc[i].id = i;
- tps->desc[i].n_voltages = info->table_len;
- tps->desc[i].volt_table = info->table;
- tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
- &tps65023_ldo_ops : &tps65023_dcdc_ops);
- tps->desc[i].type = REGULATOR_VOLTAGE;
- tps->desc[i].owner = THIS_MODULE;
-
- tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
- switch (i) {
- case TPS65023_LDO_1:
- tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
- tps->desc[i].vsel_mask = 0x07;
- tps->desc[i].enable_mask = 1 << 1;
- break;
- case TPS65023_LDO_2:
- tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
- tps->desc[i].vsel_mask = 0x70;
- tps->desc[i].enable_mask = 1 << 2;
- break;
- default: /* DCDCx */
- tps->desc[i].enable_mask =
- 1 << (TPS65023_NUM_REGULATOR - i);
- tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE;
- tps->desc[i].vsel_mask = info->table_len - 1;
- tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2;
- tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO;
- }
-
- config.dev = &client->dev;
- config.init_data = init_data;
- config.driver_data = tps;
- config.regmap = tps->regmap;
-
- /* Register the regulators */
- rdev = devm_regulator_register(&client->dev, &tps->desc[i],
- &config);
- if (IS_ERR(rdev)) {
- dev_err(&client->dev, "failed to register %s\n",
- id->name);
- return PTR_ERR(rdev);
- }
-
- /* Save regulator for cleanup */
- tps->rdev[i] = rdev;
- }
-
- i2c_set_clientdata(client, tps);
-
- /* Enable setting output voltage by I2C */
- regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
- TPS65023_REG_CTRL2_CORE_ADJ,
- TPS65023_REG_CTRL2_CORE_ADJ);
-
- return 0;
-}
-
static const struct tps_info tps65020_regs[] = {
{
.name = "VDCDC1",
@@ -381,16 +295,19 @@ static const struct tps_info tps65023_regs[] = {
};
static struct tps_driver_data tps65020_drv_data = {
+ .id = TPS65020,
.info = tps65020_regs,
.core_regulator = TPS65023_DCDC_3,
};
static struct tps_driver_data tps65021_drv_data = {
+ .id = TPS65021,
.info = tps65021_regs,
.core_regulator = TPS65023_DCDC_3,
};
static struct tps_driver_data tps65023_drv_data = {
+ .id = TPS65023,
.info = tps65023_regs,
.core_regulator = TPS65023_DCDC_1,
};
@@ -407,9 +324,224 @@ static const struct i2c_device_id tps_65023_id[] = {
MODULE_DEVICE_TABLE(i2c, tps_65023_id);
+#if defined(CONFIG_OF)
+static const struct of_device_id tps6502x_of_match[] = {
+ { .compatible = "ti,tps65023", .data = (void *)&tps65023_drv_data},
+ { .compatible = "ti,tps65021", .data = (void *)&tps65021_drv_data},
+ { .compatible = "ti,tps65020", .data = (void *)&tps65020_drv_data},
+ {},
+};
+MODULE_DEVICE_TABLE(of, tps6502x_of_match);
+#endif
+
+#if defined(CONFIG_OF)
+static struct of_regulator_match tps65020_matches[] = {
+ { .name = "vdcdc1", .driver_data = (void *) &tps65020_regs[0] },
+ { .name = "vdcdc2", .driver_data = (void *) &tps65020_regs[1] },
+ { .name = "vdcdc3", .driver_data = (void *) &tps65020_regs[2] },
+ { .name = "ldo1", .driver_data = (void *) &tps65020_regs[3] },
+ { .name = "ldo2", .driver_data = (void *) &tps65020_regs[4] },
+};
+
+static struct of_regulator_match tps65021_matches[] = {
+ { .name = "vdcdc1", .driver_data = (void *) &tps65021_regs[0] },
+ { .name = "vdcdc2", .driver_data = (void *) &tps65021_regs[1] },
+ { .name = "vdcdc3", .driver_data = (void *) &tps65021_regs[2] },
+ { .name = "ldo1", .driver_data = (void *) &tps65021_regs[3] },
+ { .name = "ldo2", .driver_data = (void *) &tps65021_regs[4] },
+};
+
+static struct of_regulator_match tps65023_matches[] = {
+ { .name = "vdcdc1", .driver_data = (void *) &tps65023_regs[0] },
+ { .name = "vdcdc2", .driver_data = (void *) &tps65023_regs[1] },
+ { .name = "vdcdc3", .driver_data = (void *) &tps65023_regs[2] },
+ { .name = "ldo1", .driver_data = (void *) &tps65023_regs[3] },
+ { .name = "ldo2", .driver_data = (void *) &tps65023_regs[4] },
+};
+
+struct regulator_init_data
+*tps6502x_parse_dt_data(struct device *dev,
+ const struct tps_driver_data *drv_data,
+ struct of_regulator_match **tps6502x_reg_matches)
+{
+ struct device_node *np = dev->of_node;
+ struct regulator_init_data *init_data;
+ struct device_node *regulators;
+ struct of_regulator_match *matches;
+ int i, count, ret;
+
+ init_data = devm_kzalloc(dev, TPS65023_NUM_REGULATOR *
+ sizeof(struct regulator_init_data),
+ GFP_KERNEL);
+ if (!init_data)
+ return NULL;
+
+ regulators = of_get_child_by_name(np, "regulators");
+ if (!regulators) {
+ dev_err(dev, "regulator node not found\n");
+ return NULL;
+ }
+
+ switch (drv_data->id) {
+ case TPS65020:
+ count = ARRAY_SIZE(tps65020_matches);
+ matches = tps65020_matches;
+ break;
+ case TPS65021:
+ count = ARRAY_SIZE(tps65021_matches);
+ matches = tps65021_matches;
+ break;
+ case TPS65023:
+ count = ARRAY_SIZE(tps65023_matches);
+ matches = tps65023_matches;
+ break;
+ default:
+ of_node_put(regulators);
+ dev_err(dev, "Invalid tps chip version\n");
+ return NULL;
+ }
+
+ ret = of_regulator_match(dev, regulators, matches, count);
+ of_node_put(regulators);
+ if (ret < 0) {
+ dev_err(dev, "Error parsing regulator init data: %d\n", ret);
+ return NULL;
+ }
+
+ *tps6502x_reg_matches = matches;
+
+ for (i = 0; i < count; i++) {
+ if (!matches[i].of_node)
+ continue;
+
+ memcpy(&init_data[i], matches[i].init_data,
+ sizeof(struct regulator_init_data));
+ }
+
+ return init_data;
+}
+#else
+struct regulator_init_data
+*tps6502x_parse_dt_data(struct device *dev,
+ const struct tps_driver_data *drv_data,
+ struct of_regulator_match **tps6502x_reg_matches)
+{
+ *tps6502x_reg_matches = NULL;
+ return NULL;
+}
+
+#endif
+
+static int tps_65023_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct tps_driver_data *drv_data = (void *)id->driver_data;
+ const struct tps_info *info = drv_data->info;
+ struct regulator_config config = { };
+ struct regulator_init_data *init_data;
+ struct regulator_dev *rdev;
+ struct of_regulator_match *tps6502x_reg_matches = NULL;
+ struct tps_pmic *tps;
+ int i;
+ int error;
+
+ if (client->dev.of_node) {
+ init_data = tps6502x_parse_dt_data(&client->dev, drv_data,
+ &tps6502x_reg_matches);
+ } else {
+ /**
+ * init_data points to array of regulator_init structures
+ * coming from the board-evm file.
+ */
+ init_data = dev_get_platdata(&client->dev);
+ }
+ if (!init_data)
+ return -EIO;
+
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
+ if (IS_ERR(tps->regmap)) {
+ error = PTR_ERR(tps->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ error);
+ return error;
+ }
+
+ /* common for all regulators */
+ tps->core_regulator = drv_data->core_regulator;
+
+ for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
+ /* Store regulator specific information */
+ tps->info[i] = info;
+
+ tps->desc[i].name = info->name;
+ tps->desc[i].id = i;
+ tps->desc[i].n_voltages = info->table_len;
+ tps->desc[i].volt_table = info->table;
+ tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
+ &tps65023_ldo_ops : &tps65023_dcdc_ops);
+ tps->desc[i].type = REGULATOR_VOLTAGE;
+ tps->desc[i].owner = THIS_MODULE;
+
+ tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
+ switch (i) {
+ case TPS65023_LDO_1:
+ tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
+ tps->desc[i].vsel_mask = 0x07;
+ tps->desc[i].enable_mask = 1 << 1;
+ break;
+ case TPS65023_LDO_2:
+ tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
+ tps->desc[i].vsel_mask = 0x70;
+ tps->desc[i].enable_mask = 1 << 2;
+ break;
+ default: /* DCDCx */
+ tps->desc[i].enable_mask =
+ 1 << (TPS65023_NUM_REGULATOR - i);
+ tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE;
+ tps->desc[i].vsel_mask = info->table_len - 1;
+ tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2;
+ tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO;
+ }
+
+ config.dev = &client->dev;
+ config.init_data = init_data;
+ config.driver_data = tps;
+ config.regmap = tps->regmap;
+ if (tps6502x_reg_matches)
+ config.of_node = tps6502x_reg_matches[i].of_node;
+
+ /* Register the regulators */
+ rdev = devm_regulator_register(&client->dev, &tps->desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&client->dev, "failed to register %s\n",
+ id->name);
+ return PTR_ERR(rdev);
+ }
+
+ /* Save regulator for cleanup */
+ tps->rdev[i] = rdev;
+ }
+
+ i2c_set_clientdata(client, tps);
+
+ /* Enable setting output voltage by I2C */
+ regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_CORE_ADJ,
+ TPS65023_REG_CTRL2_CORE_ADJ);
+
+ return 0;
+}
+
static struct i2c_driver tps_65023_i2c_driver = {
.driver = {
.name = "tps65023",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(tps6502x_of_match),
},
.probe = tps_65023_probe,
.id_table = tps_65023_id,
--
2.1.0
^ permalink raw reply related [flat|nested] 8+ messages in thread