Re: [PATCH -next] serial: etraxfs-uart: Fix crash

[Niklas Cassel <nks@flawful.org>]

Acked-by: Niklas Cassel <nks@flawful.org>

On 11/02/2015 03:32 AM, Guenter Roeck wrote:
> Since commit 7d8c70d8048c ("serial: mctrl-gpio: rename init function"),
> crisv32 either do not build or crash as follows.
>
> Unable to handle kernel NULL pointer dereference
> Linux 4.3.0-rc7-next-20151101 #1 Sun Nov 1 11:41:28 PST 2015
> ...
> Call Trace: [<c0004a0e>] show_stack+0x0/0x9e
> [<c004c0c0>] printk+0x0/0x2c
> [<c00059d4>] show_registers+0x14a/0x1c2
> [<c004c0c0>] printk+0x0/0x2c
> [<c0004b52>] die_if_kernel+0x7c/0x9e
> [<c0005346>] do_page_fault+0x32e/0x3e6
> [<c01dc59c>] of_get_property+0x0/0x2c
> [<c01e0558>] of_irq_parse_raw+0x12a/0x376
> [<c01dc59c>] of_get_property+0x0/0x2c
> [<c0053aca>] get_page_from_freelist+0x73e/0x856
> [<c01dc59c>] of_get_property+0x0/0x2c
> [<c0008912>] d_mmu_refill+0x10a/0x112
> [<c01b488c>] devm_kmalloc+0x40/0x56
> [<c01b47d0>] add_dr+0xc/0x1c
> [<c01b4800>] devm_add_action+0x2/0x4e
> [<c01abdbc>] mctrl_gpio_init_noauto+0x1c/0x76
> [<c01abf9e>] mctrl_gpio_init+0x22/0x110
>
> The function call in the etraxfs-uart driver was not renamed,
> possibly due to interference with commit 7b9c5162c182 ("serial:
> etraxfs-uart: use mctrl_gpio helpers for handling modem signals").
>
> Fixes: 7d8c70d8048c ("serial: mctrl-gpio: rename init function")
> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Cc: Niklas Cassel <nks@flawful.org>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> It might make sense to merge this patch into the original patch if possible.
>
>  drivers/tty/serial/etraxfs-uart.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/etraxfs-uart.c b/drivers/tty/serial/etraxfs-uart.c
> index 6813e316e9ff..2f80bc7e44fb 100644
> --- a/drivers/tty/serial/etraxfs-uart.c
> +++ b/drivers/tty/serial/etraxfs-uart.c
> @@ -894,7 +894,7 @@ static int etraxfs_uart_probe(struct platform_device *pdev)
>  	up->regi_ser = of_iomap(np, 0);
>  	up->port.dev = &pdev->dev;
>  
> -	up->gpios = mctrl_gpio_init(&pdev->dev, 0);
> +	up->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
>  	if (IS_ERR(up->gpios))
>  		return PTR_ERR(up->gpios);
>