* [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue
@ 2015-11-05 15:57 Ranjith
2015-11-06 13:54 ` Ranjith T
2015-11-06 20:21 ` Dan Carpenter
0 siblings, 2 replies; 5+ messages in thread
From: Ranjith @ 2015-11-05 15:57 UTC (permalink / raw)
To: gregkh; +Cc: abbotti, hsweeten, devel, linux-kernel, ranjithece24
BIT macro is used for defining bit location instead of shifting
operator - coding style issue
Signed-off-by: Ranjith T <ranjithece24@gmail.com>
---
drivers/staging/comedi/drivers/pcmmio.c | 42 +++++++++++++++----------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 10472e6..807795c 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -84,25 +84,25 @@
#define PCMMIO_AI_LSB_REG 0x00
#define PCMMIO_AI_MSB_REG 0x01
#define PCMMIO_AI_CMD_REG 0x02
-#define PCMMIO_AI_CMD_SE (1 << 7)
-#define PCMMIO_AI_CMD_ODD_CHAN (1 << 6)
+#define PCMMIO_AI_CMD_SE BIT(7)
+#define PCMMIO_AI_CMD_ODD_CHAN BIT(6)
#define PCMMIO_AI_CMD_CHAN_SEL(x) (((x) & 0x3) << 4)
#define PCMMIO_AI_CMD_RANGE(x) (((x) & 0x3) << 2)
#define PCMMIO_RESOURCE_REG 0x02
#define PCMMIO_RESOURCE_IRQ(x) (((x) & 0xf) << 0)
#define PCMMIO_AI_STATUS_REG 0x03
-#define PCMMIO_AI_STATUS_DATA_READY (1 << 7)
-#define PCMMIO_AI_STATUS_DATA_DMA_PEND (1 << 6)
-#define PCMMIO_AI_STATUS_CMD_DMA_PEND (1 << 5)
-#define PCMMIO_AI_STATUS_IRQ_PEND (1 << 4)
-#define PCMMIO_AI_STATUS_DATA_DRQ_ENA (1 << 2)
-#define PCMMIO_AI_STATUS_REG_SEL (1 << 3)
-#define PCMMIO_AI_STATUS_CMD_DRQ_ENA (1 << 1)
-#define PCMMIO_AI_STATUS_IRQ_ENA (1 << 0)
+#define PCMMIO_AI_STATUS_DATA_READY BIT(7)
+#define PCMMIO_AI_STATUS_DATA_DMA_PEND BIT(6)
+#define PCMMIO_AI_STATUS_CMD_DMA_PEND BIT(5)
+#define PCMMIO_AI_STATUS_IRQ_PEND BIT(4)
+#define PCMMIO_AI_STATUS_DATA_DRQ_ENA BIT(2)
+#define PCMMIO_AI_STATUS_REG_SEL BIT(3)
+#define PCMMIO_AI_STATUS_CMD_DRQ_ENA BIT(1)
+#define PCMMIO_AI_STATUS_IRQ_ENA BIT(0)
#define PCMMIO_AI_RES_ENA_REG 0x03
-#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS (0 << 3)
-#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS (1 << 3)
-#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS (1 << 4)
+#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS 0
+#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS BIT(3)
+#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS BIT(4)
#define PCMMIO_AI_2ND_ADC_OFFSET 0x04
#define PCMMIO_AO_LSB_REG 0x08
@@ -125,14 +125,14 @@
#define PCMMIO_AO_CMD_CHAN_SEL(x) (((x) & 0x03) << 1)
#define PCMMIO_AO_CMD_CHAN_SEL_ALL (0x0f << 0)
#define PCMMIO_AO_STATUS_REG 0x0b
-#define PCMMIO_AO_STATUS_DATA_READY (1 << 7)
-#define PCMMIO_AO_STATUS_DATA_DMA_PEND (1 << 6)
-#define PCMMIO_AO_STATUS_CMD_DMA_PEND (1 << 5)
-#define PCMMIO_AO_STATUS_IRQ_PEND (1 << 4)
-#define PCMMIO_AO_STATUS_DATA_DRQ_ENA (1 << 2)
-#define PCMMIO_AO_STATUS_REG_SEL (1 << 3)
-#define PCMMIO_AO_STATUS_CMD_DRQ_ENA (1 << 1)
-#define PCMMIO_AO_STATUS_IRQ_ENA (1 << 0)
+#define PCMMIO_AO_STATUS_DATA_READY BIT(7)
+#define PCMMIO_AO_STATUS_DATA_DMA_PEND BIT(6)
+#define PCMMIO_AO_STATUS_CMD_DMA_PEND BIT(5)
+#define PCMMIO_AO_STATUS_IRQ_PEND BIT(4)
+#define PCMMIO_AO_STATUS_DATA_DRQ_ENA BIT(2)
+#define PCMMIO_AO_STATUS_REG_SEL BIT(3)
+#define PCMMIO_AO_STATUS_CMD_DRQ_ENA BIT(1)
+#define PCMMIO_AO_STATUS_IRQ_ENA BIT(0)
#define PCMMIO_AO_RESOURCE_ENA_REG 0x0b
#define PCMMIO_AO_2ND_DAC_OFFSET 0x04
--
1.7.10.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue
2015-11-05 15:57 [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue Ranjith
@ 2015-11-06 13:54 ` Ranjith T
2015-11-06 15:08 ` Ian Abbott
2015-11-06 16:51 ` Greg KH
2015-11-06 20:21 ` Dan Carpenter
1 sibling, 2 replies; 5+ messages in thread
From: Ranjith T @ 2015-11-06 13:54 UTC (permalink / raw)
To: gregkh; +Cc: Ian Abbott, hsweeten, devel, linux-kernel, Ranjith T
Is this patch is fine?..Because I didn't get any reply for this patch
Thanks,
Ranjith.T.
On Thu, Nov 5, 2015 at 9:27 PM, Ranjith <ranjithece24@gmail.com> wrote:
> BIT macro is used for defining bit location instead of shifting
> operator - coding style issue
>
> Signed-off-by: Ranjith T <ranjithece24@gmail.com>
> ---
> drivers/staging/comedi/drivers/pcmmio.c | 42 +++++++++++++++----------------
> 1 file changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
> index 10472e6..807795c 100644
> --- a/drivers/staging/comedi/drivers/pcmmio.c
> +++ b/drivers/staging/comedi/drivers/pcmmio.c
> @@ -84,25 +84,25 @@
> #define PCMMIO_AI_LSB_REG 0x00
> #define PCMMIO_AI_MSB_REG 0x01
> #define PCMMIO_AI_CMD_REG 0x02
> -#define PCMMIO_AI_CMD_SE (1 << 7)
> -#define PCMMIO_AI_CMD_ODD_CHAN (1 << 6)
> +#define PCMMIO_AI_CMD_SE BIT(7)
> +#define PCMMIO_AI_CMD_ODD_CHAN BIT(6)
> #define PCMMIO_AI_CMD_CHAN_SEL(x) (((x) & 0x3) << 4)
> #define PCMMIO_AI_CMD_RANGE(x) (((x) & 0x3) << 2)
> #define PCMMIO_RESOURCE_REG 0x02
> #define PCMMIO_RESOURCE_IRQ(x) (((x) & 0xf) << 0)
> #define PCMMIO_AI_STATUS_REG 0x03
> -#define PCMMIO_AI_STATUS_DATA_READY (1 << 7)
> -#define PCMMIO_AI_STATUS_DATA_DMA_PEND (1 << 6)
> -#define PCMMIO_AI_STATUS_CMD_DMA_PEND (1 << 5)
> -#define PCMMIO_AI_STATUS_IRQ_PEND (1 << 4)
> -#define PCMMIO_AI_STATUS_DATA_DRQ_ENA (1 << 2)
> -#define PCMMIO_AI_STATUS_REG_SEL (1 << 3)
> -#define PCMMIO_AI_STATUS_CMD_DRQ_ENA (1 << 1)
> -#define PCMMIO_AI_STATUS_IRQ_ENA (1 << 0)
> +#define PCMMIO_AI_STATUS_DATA_READY BIT(7)
> +#define PCMMIO_AI_STATUS_DATA_DMA_PEND BIT(6)
> +#define PCMMIO_AI_STATUS_CMD_DMA_PEND BIT(5)
> +#define PCMMIO_AI_STATUS_IRQ_PEND BIT(4)
> +#define PCMMIO_AI_STATUS_DATA_DRQ_ENA BIT(2)
> +#define PCMMIO_AI_STATUS_REG_SEL BIT(3)
> +#define PCMMIO_AI_STATUS_CMD_DRQ_ENA BIT(1)
> +#define PCMMIO_AI_STATUS_IRQ_ENA BIT(0)
> #define PCMMIO_AI_RES_ENA_REG 0x03
> -#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS (0 << 3)
> -#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS (1 << 3)
> -#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS (1 << 4)
> +#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS 0
> +#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS BIT(3)
> +#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS BIT(4)
> #define PCMMIO_AI_2ND_ADC_OFFSET 0x04
>
> #define PCMMIO_AO_LSB_REG 0x08
> @@ -125,14 +125,14 @@
> #define PCMMIO_AO_CMD_CHAN_SEL(x) (((x) & 0x03) << 1)
> #define PCMMIO_AO_CMD_CHAN_SEL_ALL (0x0f << 0)
> #define PCMMIO_AO_STATUS_REG 0x0b
> -#define PCMMIO_AO_STATUS_DATA_READY (1 << 7)
> -#define PCMMIO_AO_STATUS_DATA_DMA_PEND (1 << 6)
> -#define PCMMIO_AO_STATUS_CMD_DMA_PEND (1 << 5)
> -#define PCMMIO_AO_STATUS_IRQ_PEND (1 << 4)
> -#define PCMMIO_AO_STATUS_DATA_DRQ_ENA (1 << 2)
> -#define PCMMIO_AO_STATUS_REG_SEL (1 << 3)
> -#define PCMMIO_AO_STATUS_CMD_DRQ_ENA (1 << 1)
> -#define PCMMIO_AO_STATUS_IRQ_ENA (1 << 0)
> +#define PCMMIO_AO_STATUS_DATA_READY BIT(7)
> +#define PCMMIO_AO_STATUS_DATA_DMA_PEND BIT(6)
> +#define PCMMIO_AO_STATUS_CMD_DMA_PEND BIT(5)
> +#define PCMMIO_AO_STATUS_IRQ_PEND BIT(4)
> +#define PCMMIO_AO_STATUS_DATA_DRQ_ENA BIT(2)
> +#define PCMMIO_AO_STATUS_REG_SEL BIT(3)
> +#define PCMMIO_AO_STATUS_CMD_DRQ_ENA BIT(1)
> +#define PCMMIO_AO_STATUS_IRQ_ENA BIT(0)
> #define PCMMIO_AO_RESOURCE_ENA_REG 0x0b
> #define PCMMIO_AO_2ND_DAC_OFFSET 0x04
>
> --
> 1.7.10.4
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue
2015-11-06 13:54 ` Ranjith T
@ 2015-11-06 15:08 ` Ian Abbott
2015-11-06 16:51 ` Greg KH
1 sibling, 0 replies; 5+ messages in thread
From: Ian Abbott @ 2015-11-06 15:08 UTC (permalink / raw)
To: Ranjith T, gregkh; +Cc: hsweeten, devel, linux-kernel
On 06/11/15 13:54, Ranjith T wrote:
> Is this patch is fine?..Because I didn't get any reply for this patch
Your patch numbering sucks. Isolated patches should just use [PATCH],
not [PATCH 3/3], [PATCH 4/4], etc.
Also, could you mention the name of the COMEDI driver in the patch
title, e.g.:
[PATCH] comedi: pcmmio: Fix coding style - use BIT macro
> Thanks,
> Ranjith.T.
>
> On Thu, Nov 5, 2015 at 9:27 PM, Ranjith <ranjithece24@gmail.com> wrote:
>> BIT macro is used for defining bit location instead of shifting
>> operator - coding style issue
>>
>> Signed-off-by: Ranjith T <ranjithece24@gmail.com>
>> ---
>> drivers/staging/comedi/drivers/pcmmio.c | 42 +++++++++++++++----------------
>> 1 file changed, 21 insertions(+), 21 deletions(-)
>>
>> diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
>> index 10472e6..807795c 100644
>> --- a/drivers/staging/comedi/drivers/pcmmio.c
>> +++ b/drivers/staging/comedi/drivers/pcmmio.c
>> @@ -84,25 +84,25 @@
>> #define PCMMIO_AI_LSB_REG 0x00
>> #define PCMMIO_AI_MSB_REG 0x01
>> #define PCMMIO_AI_CMD_REG 0x02
>> -#define PCMMIO_AI_CMD_SE (1 << 7)
>> -#define PCMMIO_AI_CMD_ODD_CHAN (1 << 6)
>> +#define PCMMIO_AI_CMD_SE BIT(7)
The whitespace is a bit strange here as 'BIT(7)' no longer lines up with
the surrounding lines.
>> +#define PCMMIO_AI_CMD_ODD_CHAN BIT(6)
>> #define PCMMIO_AI_CMD_CHAN_SEL(x) (((x) & 0x3) << 4)
>> #define PCMMIO_AI_CMD_RANGE(x) (((x) & 0x3) << 2)
>> #define PCMMIO_RESOURCE_REG 0x02
>> #define PCMMIO_RESOURCE_IRQ(x) (((x) & 0xf) << 0)
>> #define PCMMIO_AI_STATUS_REG 0x03
>> -#define PCMMIO_AI_STATUS_DATA_READY (1 << 7)
>> -#define PCMMIO_AI_STATUS_DATA_DMA_PEND (1 << 6)
>> -#define PCMMIO_AI_STATUS_CMD_DMA_PEND (1 << 5)
>> -#define PCMMIO_AI_STATUS_IRQ_PEND (1 << 4)
>> -#define PCMMIO_AI_STATUS_DATA_DRQ_ENA (1 << 2)
>> -#define PCMMIO_AI_STATUS_REG_SEL (1 << 3)
>> -#define PCMMIO_AI_STATUS_CMD_DRQ_ENA (1 << 1)
>> -#define PCMMIO_AI_STATUS_IRQ_ENA (1 << 0)
>> +#define PCMMIO_AI_STATUS_DATA_READY BIT(7)
>> +#define PCMMIO_AI_STATUS_DATA_DMA_PEND BIT(6)
>> +#define PCMMIO_AI_STATUS_CMD_DMA_PEND BIT(5)
>> +#define PCMMIO_AI_STATUS_IRQ_PEND BIT(4)
>> +#define PCMMIO_AI_STATUS_DATA_DRQ_ENA BIT(2)
The 'BIT(2)' also does not line up with the surrounding lines.
>> +#define PCMMIO_AI_STATUS_REG_SEL BIT(3)
>> +#define PCMMIO_AI_STATUS_CMD_DRQ_ENA BIT(1)
>> +#define PCMMIO_AI_STATUS_IRQ_ENA BIT(0)
>> #define PCMMIO_AI_RES_ENA_REG 0x03
>> -#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS (0 << 3)
>> -#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS (1 << 3)
>> -#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS (1 << 4)
>> +#define PCMMIO_AI_RES_ENA_CMD_REG_ACCESS 0
>> +#define PCMMIO_AI_RES_ENA_AI_RES_ACCESS BIT(3)
>> +#define PCMMIO_AI_RES_ENA_DIO_RES_ACCESS BIT(4)
>> #define PCMMIO_AI_2ND_ADC_OFFSET 0x04
>>
>> #define PCMMIO_AO_LSB_REG 0x08
>> @@ -125,14 +125,14 @@
>> #define PCMMIO_AO_CMD_CHAN_SEL(x) (((x) & 0x03) << 1)
>> #define PCMMIO_AO_CMD_CHAN_SEL_ALL (0x0f << 0)
>> #define PCMMIO_AO_STATUS_REG 0x0b
>> -#define PCMMIO_AO_STATUS_DATA_READY (1 << 7)
>> -#define PCMMIO_AO_STATUS_DATA_DMA_PEND (1 << 6)
>> -#define PCMMIO_AO_STATUS_CMD_DMA_PEND (1 << 5)
>> -#define PCMMIO_AO_STATUS_IRQ_PEND (1 << 4)
>> -#define PCMMIO_AO_STATUS_DATA_DRQ_ENA (1 << 2)
>> -#define PCMMIO_AO_STATUS_REG_SEL (1 << 3)
>> -#define PCMMIO_AO_STATUS_CMD_DRQ_ENA (1 << 1)
>> -#define PCMMIO_AO_STATUS_IRQ_ENA (1 << 0)
>> +#define PCMMIO_AO_STATUS_DATA_READY BIT(7)
>> +#define PCMMIO_AO_STATUS_DATA_DMA_PEND BIT(6)
>> +#define PCMMIO_AO_STATUS_CMD_DMA_PEND BIT(5)
>> +#define PCMMIO_AO_STATUS_IRQ_PEND BIT(4)
>> +#define PCMMIO_AO_STATUS_DATA_DRQ_ENA BIT(2)
>> +#define PCMMIO_AO_STATUS_REG_SEL BIT(3)
>> +#define PCMMIO_AO_STATUS_CMD_DRQ_ENA BIT(1)
>> +#define PCMMIO_AO_STATUS_IRQ_ENA BIT(0)
>> #define PCMMIO_AO_RESOURCE_ENA_REG 0x0b
>> #define PCMMIO_AO_2ND_DAC_OFFSET 0x04
>>
>> --
>> 1.7.10.4
>>
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Web: http://www.mev.co.uk/ )=-
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue
2015-11-06 13:54 ` Ranjith T
2015-11-06 15:08 ` Ian Abbott
@ 2015-11-06 16:51 ` Greg KH
1 sibling, 0 replies; 5+ messages in thread
From: Greg KH @ 2015-11-06 16:51 UTC (permalink / raw)
To: Ranjith T; +Cc: devel, Ian Abbott, linux-kernel
On Fri, Nov 06, 2015 at 07:24:18PM +0530, Ranjith T wrote:
> Is this patch is fine?..Because I didn't get any reply for this patch
You sent it 1 day ago, while we are in the middle of the merge window
and I can't touch anything for 2 weeks at the earliest.
Please be patient.
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue
2015-11-05 15:57 [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue Ranjith
2015-11-06 13:54 ` Ranjith T
@ 2015-11-06 20:21 ` Dan Carpenter
1 sibling, 0 replies; 5+ messages in thread
From: Dan Carpenter @ 2015-11-06 20:21 UTC (permalink / raw)
To: Ranjith; +Cc: gregkh, devel, abbotti, linux-kernel
On Thu, Nov 05, 2015 at 09:27:45PM +0530, Ranjith wrote:
> BIT macro is used for defining bit location instead of shifting
> operator - coding style issue
>
> Signed-off-by: Ranjith T <ranjithece24@gmail.com>
You're From line and your signed-off line need to match and they both
need to be your legal name that you use to sign legal documents.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-11-06 20:21 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-11-05 15:57 [PATCH 3/3] comedi: driver: Fix - BIT macro used coding style issue Ranjith
2015-11-06 13:54 ` Ranjith T
2015-11-06 15:08 ` Ian Abbott
2015-11-06 16:51 ` Greg KH
2015-11-06 20:21 ` Dan Carpenter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox