public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Peter Hurley <peter@hurleysoftware.com>
To: Chris Brandt <chris.brandt@renesas.com>,
	linux@arm.linux.org.uk, arnd@arndb.de
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sh@vger.kernel.org
Subject: Re: [PATCH] ARM: xip: Use correct symbol for end of ROM marker
Date: Thu, 12 Nov 2015 07:17:47 -0500	[thread overview]
Message-ID: <5644836B.2050608@hurleysoftware.com> (raw)
In-Reply-To: <1447251455-22731-1-git-send-email-chris.brandt@renesas.com>

On 11/11/2015 09:17 AM, Chris Brandt wrote:
> For an XIP build, _edata_loc, not _etext, represents the end of the
> binary image that will be programmed into ROM and mapped into the
> MODULES_VADDR area.
> With an XIP kernel, nothing is loaded into RAM before boot, meaning
> you have to take into account the size of the entire binary image
> that was programmed, including the init data values that will be copied
> to RAM during kernel boot.
> 
> This fixes the bug where you might lose the end of your kernel area
> after page table setup is complete.
> 
> 
> Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
> ---
>  arch/arm/mm/mmu.c              |    4 ++--
>  include/asm-generic/sections.h |    2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
> index 4867f5d..dd5a56b 100644
> --- a/arch/arm/mm/mmu.c
> +++ b/arch/arm/mm/mmu.c
> @@ -1210,7 +1210,7 @@ static inline void prepare_page_table(void)
>  
>  #ifdef CONFIG_XIP_KERNEL
>  	/* The XIP kernel is mapped in the module area -- skip over it */
> -	addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
> +	addr = ((unsigned long)_edata_loc + PMD_SIZE - 1) & PMD_MASK;
>  #endif
>  	for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
>  		pmd_clear(pmd_off_k(addr));
> @@ -1292,7 +1292,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
>  #ifdef CONFIG_XIP_KERNEL
>  	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
>  	map.virtual = MODULES_VADDR;
> -	map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
> +	map.length = ((unsigned long)_edata_loc - map.virtual + ~SECTION_MASK) & SECTION_MASK;
>  	map.type = MT_ROM;
>  	create_mapping(&map);
>  #endif
> diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
> index b58fd66..195554d 100644
> --- a/include/asm-generic/sections.h
> +++ b/include/asm-generic/sections.h
> @@ -26,7 +26,7 @@
>   *	__ctors_start, __ctors_end
>   */
>  extern char _text[], _stext[], _etext[];
> -extern char _data[], _sdata[], _edata[];
> +extern char _data[], _sdata[], _edata[], _edata_loc[];
>  extern char __bss_start[], __bss_stop[];
>  extern char __init_begin[], __init_end[];
>  extern char _sinittext[], _einittext[];
> 

I think below is required as well.

--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -34,7 +36,7 @@
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
 #undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
+#define MODULES_VADDR	(((unsigned long)_edata_loc + ~PMD_MASK) & PMD_MASK)
 #endif
 
Regards,
Peter Hurley


  reply	other threads:[~2015-11-12 12:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-11 14:17 [PATCH] ARM: xip: Use correct symbol for end of ROM marker Chris Brandt
2015-11-12 12:17 ` Peter Hurley [this message]
2015-11-12 13:15   ` Chris Brandt
2015-11-12 16:32 ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5644836B.2050608@hurleysoftware.com \
    --to=peter@hurleysoftware.com \
    --cc=arnd@arndb.de \
    --cc=chris.brandt@renesas.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox