linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alim Akhtar <alim.akhtar@samsung.com>
To: Lee Jones <lee.jones@linaro.org>, Alim Akhtar <alim.akhtar@gmail.com>
Cc: broonie@kernel.org,
	"Krzysztof Kozłowski" <k.kozlowski@samsung.com>,
	"linux-samsung-soc@vger.kernel.org"
	<linux-samsung-soc@vger.kernel.org>,
	rtc-linux@googlegroups.com,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support
Date: Fri, 20 Nov 2015 14:45:45 +0530	[thread overview]
Message-ID: <564EE4C1.3020907@samsung.com> (raw)
In-Reply-To: <20151120090528.GC3098@x1>

Hi Lee,

On 11/20/2015 02:35 PM, Lee Jones wrote:
> On Thu, 19 Nov 2015, Alim Akhtar wrote:
>
>> Hi Lee,
>> Do I need to resend this series? This series still apply cleanly on
>> top of v4.4-rc1.
>> I can see 1/4 is already applied.
>
> Yes, rebase and resend please.
>
Ok will resend, but I will drop patch #1/4 as this is already applied.

>> On Fri, Oct 30, 2015 at 11:55 AM, Alim Akhtar <alim.akhtar@samsung.com> wrote:
>>> Samsung's S2MPS15 PMIC is targetted to be used with Samsung's Exynos7 SoC.
>>> The S2MPS15 PMIC is similar in functionality to S2MPS11/14 PMIC. It contains
>>> 27 LDO and 10 Buck regulators, RTC, three 32.768 KHz clock outputs and allows
>>> programming these blocks via a I2C interface. This patch series adds initial
>>> support for LDO/Buck regulators of S2MPS15 PMIC.
>>>
>>> Changes since v4:
>>> * Dorpped Krzysztof reviewed-by and Lee Acked-by tags from patch 1/4,
>>>    because of the new changes to DT bindings. Seeking a fresh review/ack tags.
>>> * Removed samsung,s2mps15-clk compatible as we can reuse exsisting compatible of s2mps13.
>>> * Added acked-by on patch 2/4
>>> * Modified rtc driver as s2mps15 differs from s2mps14/13 etc, addressed Krzysztof
>>>    concerns on rtc patch.
>>>    There are some other improvement suggestion from Krzystof for the rtc, I feel that can be done
>>>    as a sperate patch later.
>>>
>>> Changes since v3:
>>> * Changes regulator driver name from s2mps15-pmic -> s2mps15-regulator as disscussed here [2]
>>> * Re-use the exsisting compatible/names for s2mps15 clock block.
>>>
>>> Changes since v2:
>>> * Addressed Lee Jones review comments.
>>>
>>> Changes since v1:
>>> * Added suggestion from Krzysztof [1].
>>> * Added s2mps15's 32.768 clocks support.
>>> * Added s2mps15's rtc support.
>>>
>>> V1 of these patches (with a lesser features) were posted a year back,
>>> since then there is not much progress on this, this is my attempt to
>>> move things forward.
>>>
>>> [1]-> https://lkml.org/lkml/2014/10/14/67
>>> [2]-> https://lkml.org/lkml/2015/10/28/417
>>>
>>> This series is based on linux-next-20151022.
>>> This is tested on exynos7-espresso board.
>>>
>>> Alim Akhtar (1):
>>>    drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC
>>>
>>> Thomas Abraham (3):
>>>    dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC
>>>    mfd: sec: Add support for S2MPS15 PMIC
>>>    regulator: s2mps11: add support for S2MPS15 regulators
>>>
>>>   Documentation/devicetree/bindings/mfd/s2mps11.txt |   21 ++-
>>>   drivers/mfd/sec-core.c                            |   31 ++++
>>>   drivers/mfd/sec-irq.c                             |    8 ++
>>>   drivers/regulator/Kconfig                         |    4 +-
>>>   drivers/regulator/s2mps11.c                       |  135 +++++++++++++++++-
>>>   drivers/rtc/rtc-s5m.c                             |   37 ++++-
>>>   include/linux/mfd/samsung/core.h                  |    1 +
>>>   include/linux/mfd/samsung/rtc.h                   |    2 +
>>>   include/linux/mfd/samsung/s2mps15.h               |  158 +++++++++++++++++++++
>>>   9 files changed, 383 insertions(+), 14 deletions(-)
>>>   create mode 100644 include/linux/mfd/samsung/s2mps15.h
>>>
>>>
>>
>>
>>
>

  reply	other threads:[~2015-11-20  9:14 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-30  6:25 [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-10-30  6:25 ` [PATCH v5 1/4] dt-bindings: mfd: s2mps11: add documentation for s2mps15 PMIC Alim Akhtar
2015-10-30  7:42   ` Krzysztof Kozlowski
2015-10-30  9:25     ` Alim Akhtar
2015-10-30 17:24   ` Lee Jones
2015-11-06 22:33   ` Rob Herring
2015-11-07  1:11     ` Alim Akhtar
2015-11-07  3:09     ` [rtc-linux] " Krzysztof Kozlowski
2015-11-09  5:54       ` Alim Akhtar
2015-11-09  6:40         ` Krzysztof Kozlowski
2015-10-30  6:25 ` [PATCH v5 2/4] mfd: sec: Add support for S2MPS15 PMIC Alim Akhtar
2015-10-30  6:25 ` [PATCH v5 3/4] regulator: s2mps11: add support for S2MPS15 regulators Alim Akhtar
2015-10-30  6:25 ` [PATCH v5 4/4] drivers/rtc/rtc-s5m.c: add support for S2MPS15 RTC Alim Akhtar
2015-10-30  8:38   ` Krzysztof Kozlowski
2015-10-30  9:28     ` Alim Akhtar
2015-10-30 17:23   ` Lee Jones
2015-11-01 17:40   ` Alexandre Belloni
2015-11-01 23:46     ` Krzysztof Kozlowski
2015-11-02  0:47       ` Alexandre Belloni
2015-11-02  9:03         ` Lee Jones
2015-11-02 10:19           ` Alexandre Belloni
2015-11-02 10:58             ` Lee Jones
2015-11-19 18:00 ` [PATCH v5 0/4] mfd: sec: add S2MPS15 PMIC support Alim Akhtar
2015-11-20  9:05   ` Lee Jones
2015-11-20  9:15     ` Alim Akhtar [this message]
2015-11-20 10:31       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=564EE4C1.3020907@samsung.com \
    --to=alim.akhtar@samsung.com \
    --cc=alim.akhtar@gmail.com \
    --cc=broonie@kernel.org \
    --cc=k.kozlowski@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).